Synthesis of iron(III) oxide from solution under exposure to external electric field

New method for controlling the physicochemical properties and morphology of iron oxide is suggested. The methods of transmission and scanning electron microscopy and X-ray phase and thermal analysis were used to study the structure and properties of highly dispersed iron oxides formed under exposure of the reaction mixture to an external electric field. The effect of synthesis conditions on the formation of structure and morphology of particles of iron oxide, a compound that finds practical application as a pigment or catalyst base, was examined.     

Self-aggregation and phase behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers in aqueous solution

The phase behavior and aggregation properties of block copolymers of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (Pluronics, poloxamers) in aqueous solution have recently attracted much attention. Both experimental and theoretical studies are reviewed, not comprehensively, but with the focus on studies, partly cooperative, partly independent, performed by groups in Uppsala (light scattering and fluorescence), Roskilde (rheology and calorimetry), Risø (SANS), Graz (x-ray and speed of sound), and Lund (theoretical model calculations).The phase behavior of these copolymers is similar in many respects to that of conventional nonionic surfactants, with the appearance of hexagonal, cubic, and lamellar liquid crystalline phases at high concentrations. In the isotropic solution phase the critical concentration for micelle formation is strongly temperature dependent, and at a given concentration the monomer to micelle transition occurs gradually over a broad temperature range, partly due to the broad size polydispersity of both the PO- and EO-blocks. For some Pluronic copolymers a transition from globular to long rod-like micelles occurs above a transition temperature, resulting in a strong and sudden increase of viscosity and viscoelasticity of the solution.Size and aggregation numbers have been determined for the globular micelles in some cases, and also the rod-like micelles have been characterized. NMR and fluorescence measurements have provided further information on the properties of the micellar core and mantle. In combination, results from different measurements on the same Pluronics material indicate that the aggregation number of the micelles increases with the temperature, whereas the hydrodynmic radius varies much less. The PEO-mantle of the micelles seems to contract with increasing temperature. The core appears to contain appreciable amounts of PEO in addition to PPO (and also some water). The segregation between core and mantle is not as distinct as in normal micelles, a conclusion which is in line with the predictions from the model calculations.     

Poly(ethylene oxide)-poly(styrene oxide)-poly(ethylene oxide) copolymers: Micellization, drug solubilization, and gelling features

Two new poly(ethylene oxide)-poly(styrene oxide) triblock copolymers (PEO-PSO-PEO) with optimized block lengths selected on the basis of previous studies were synthesized with the aim of achieving a maximal solubilization ability and a suitable sustained release, while keeping very low material expense and excellent aqueous copolymer solubility. The self-assembling and gelling properties of these copolymers were characterized by means of light scattering, fluorescence spectroscopy, transmission electron microscopy, and rheometry. Both copolymers formed spherical micelles (12-14 nm) at very low concentrations. At larger concentration (>25 wt%), copolymer solutions showed a rich phase behavior, with the appearance of two types of rheologically active (more viscous) fluids and of physical gels depending on solution temperature and concentration. The copolymer behaved notably different despite their relatively similar block lengths. The ability of the polymeric micellar solutions to solubilize the antifungal drug griseofulvin was evaluated and compared to that reported for other structurally-related block copolymers. Drug solubilization values up to 55 mg g⁻¹ were achieved, which are greater than those obtained by previously analyzed poly(ethylene oxide)-poly(styrene oxide), poly(ethylene oxide)-poly(butylene oxide), and poly(ethylene oxide)-poly(propylene oxide) block copolymers. The results indicate that the selected SO/EO ratio and copolymer block lengths were optimal for simultaneously achieving low critical micelle concentrations (cmc) values and large drug encapsulation ability. The amount of drug released from the polymeric micelles was larger at pH 7.4 than at acidic conditions, although still sustained over 1 day.     

Surface modification of surface sol-gel derived titanium oxide films by self-assembled monolayers (SAMs) and non-specific protein adsorption studies

Biological events occurring at the implant-host interface, including protein adsorption are mainly influenced by surface properties of the implant. Titanium alloys, one of the most widely used implants, has shown good biocompatibility primarily through its surface oxide. In this study, a surface sol-gel process based on the surface reaction of metal alkoxides with a hydroxylated surface was used to prepare ultrathin titanium oxide (TiOx) coatings on silicon wafers. The oxide deposited on the surface was then modified by self-assembled monolayers (SAMs) of silanes with different functional groups. Interesting surface morphology trends and protein adhesion properties of the modified titanium oxide surfaces were observed as studied by non-specific protein binding of serum albumin. The surface properties were investigated systematically using water contact angle, ellipsometry, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) measurements. Results showed that the surface sol-gel process predominantly formed homogeneous, but rough and porous titanium oxide layers. The protein adsorption was dependent primarily on the silane chemistry, packing of the alkyl chains (extent of van der Waals interaction), morphology (porosity and roughness), and wettability of the sol-gel oxide. Comparison was made with a thermally evaporated TiOx-Ti/Si-wafer substrate (control). This method further extends the functionalization of surface sol-gel derived TiOx layers for possible titanium alloy bioimplant surface modification.     

Preconcentration of U(VI) ions on few-layered graphene oxide nanosheets from aqueous solutions

Graphene oxide nanosheets have attracted multidisciplinary attention due to their unique physicochemical properties. Herein, few-layered graphene oxide nanosheets were synthesized from graphite using a modified Hummers method and were characterized by TEM, AFM, Raman spectroscopy, XPS, FTIR spectroscopy, TG-DTA and acid-base titrations. The prepared few-layered graphene oxide nanosheets were used as adsorbents for the preconcentration of U(VI) ions from large volumes of aqueous solutions as a function of pH, ionic strength and temperature. The sorption of U(VI) ions on the graphene oxide nanosheets was strongly dependent on pH and independent of the ionic strength, indicating that the sorption was mainly dominated by inner-sphere surface complexation rather than by outer-sphere surface complexation or ion exchange. The abundant oxygen-containing functional groups on the surfaces of the graphene oxide nanosheets played an important role in U(VI) sorption. The sorption of U(VI) on graphene oxide nanosheets increased with an increase in temperature and the thermodynamic parameters calculated from the temperature-dependent sorption isotherms suggested that the sorption of U(vi) on graphene oxide nanosheets was an endothermic and spontaneous process. The maximum sorption capacities (Q(max)) of U(VI) at pH 5.0 ± 0.1 and T = 20 °C was 97.5 mg g(-1), which was much higher than any of the currently reported nanomaterials. The graphene oxide nanosheets may be suitable materials for the removal and preconcentration of U(VI) ions from large volumes of aqueous solutions, for example, U(VI) polluted wastewater, if they can be synthesized in a cost-effective manner on a large scale in the future.     

Self-consistent-field analysis of the micellization of carboxy-modified poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymers

The micellization properties of carboxy-modified Pluronics P85 (poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers) are investigated by means of a molecularly realistic self-consistent-field theory. We consider the, so-called, carboxylic acid end-standing P85 (CAE-85) case where the carboxylic group is located at the end of both PEO parts and the carboxylic acid center-standing P85 (CAC-85) case where each of the carboxylic group presents between the PEO and PPO blocks. The micellization of these copolymers depends on the pH, the added electrolyte concentration phis, and the temperature. It is shown that the aggregation number (Nagg) decreases, whereas the critical micellization concentration (CMC) increases with pH. For the case of increasing phis, the Nagg increases and the CMC decreases. The critical micellization temperature (CMT) and cloud point temperature (CPT) increase with pH at low phis and decrease at increasing phis. The changing from CAE-85 to CAC-85 leads to increasing CMC and CMT, but lower CPT.     

Dipole moments of poly(ethylene oxide) and poly(hexamethylene oxide) chains

The mean-square dipole moments of poly(ethylene oxide) and poly(hexamethylene oxide) chains have been determined from dielectric constant measurements on dilute solutions of the polymers in benzene. The values obtained are in good agreement with those predccted using the rotational isomeric state models for these chains. In addition, the unperturbed dimensions of poly(hexamethylene oxide) have been calculated as a function of molecular weight, using the isomeric state theory.     

Compatibility of poly(vinyl chloride) with polyalkyleneoxides. II. Poly(propylene oxide) and poly(tetramethylene oxide)

This study [Part II of a series dealing with the compatibility of polyalkyleneoxides with poly(vinyl chloride)] examines blends of PVC with poly(propylene oxide) (PPrO) and poly(tetra-methylene oxide) (PTMO), covering the entire composition range. Morphological, dynamic mechanical and thermal properties investigated indicate that PVC/PPrO blends are incompatible, whereas the PVC/PTMO system shows miscibility in the melt. For this polyblend and at high polyether compositions where the Hoffman–Weeks analysis can be applied, T_m equilibrium data allow the determination of the thermodynamic interaction parameter, χ₁₂ = ?0.15. Experimental compatibility data of all polyether-PVC pairs investigated in Parts I and II are also used to test various blend miscibility prediction schemes, using solubility parameter theory and recent theory on copolymer-copolymer miscibility.     

Titanium-supported nickel-copper oxide catalysts for oxidation of carbon(II) oxide

Nickel-copper compositions for catalytic oxidation of carbon(II) oxide to carbon(IV) oxide were prepared by impregnation of oxide films on titanium surface, obtained by plasma electrolytic oxidation followed by annealing. Plasma electrolysis oxide coatings with a layer thickness of 5 to 50 μm were generated using different electrolytes. The compositions were studied by X-ray powder diffraction, X-ray spectral analysis, and electron microscopy, and moisture absorption of the initial plasma electrolytic structures was estimated. A linear correlation was found between the overall concentration of nickel and copper (4 to 25 mol %) in the surface layer of ∼2–5-μm compositions and their catalytic activity. The overall concentration of nickel and copper was found to increase in parallel with the moisture absorption of plasma electrolytic oxidation coatings. Nickel-copper compositions based on plasma electrolytic oxidation coatings generated in a silicate electrolyte displayed the best catalytic, mechanical, and adhesion properties.     

Amphiphilic polylactide-poly(ethylene oxide)-poly(propylene oxide) block copolymers: Self-assembly behavior and cell affinity

Polylactide (PLA) is a biodegradable polyester recognized for its potential use as a biomedical material. Poly(ethylene oxide) (PEO) and copolymers based on PEO and poly(propylene oxide) (PPO) are biocompatible polyethers widely applied in the biomedical field, particularly as macromolecular nonionic surfactants. In this work, PLA blocks were attached to the PEO and to the PEO and PPO-based triblock copolymer PEO–PPO–PEO, through ring-opening polymerization of racemic lactide (rac-LA) to obtain the amphiphilic triblock PLA–PEO–PLA and pentablock PLA–PEO–PPO–PEO–PLA copolymers containing hydrophilic/hydrophobic blocks with variable block mass ratios. The copolymers were evaluated for chemical composition, molar mass, and thermal properties, and they were used to prepare self-assemble aggregates in water from tetrahydrofuran polymer solutions. The combination of scattering light experiments and microscopy techniques revealed the spherical morphology of the aggregates with diameters around 180–200 nm, which comprises a hydrophobic PLA core and a hydrophilic polyether shell. The aggregates are nontoxic to human cervical cancer cell line — HeLa cells, as determined by MTS assay, and the aggregates are potential candidates to be applied in the encapsulation of hydrophobic compounds. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2203–2213     

Synthesis of poly(styrene-graft-ethylene oxide) by ethoxylation of amide group containing styrene copolymers

Graft copolymers containing poly(ethylene oxide) side chains on a polystyrene backbone have been synthesized. Styrene copolymers synthesized by free radical mechanism and containing between 5 and 15 mol % acrylamide or methacrylamide were used as backbones. The amide groups in the copolymers were ionized by using potassium tert-butoxide or potassium naphthalene, and grafting was achieved by utilizing the amide anions as initiator sites for the polymerization of ethylene oxide in 2-ethoxyethyl ether at 65°C. The graft copolymers were characterized with respect to molecular weight and composition using elemental analysis, NMR, gel permeation chromatography, IR, and viscosity measurements. The size of the side chains were between 600 and 2000 g/mol. GPC results from a hydrolyzed graft copolymer sample suggest a narrow size distribution for the poly(ethylene oxide) grafts. Solution properties of the graft copolymers were investigated in different toluene/methanol mixtures. The intrinsic viscosities of the graft copolymers were found to depend primarily on the poly(ethylene oxide) content rather than the graft density or the poly(ethylene oxide) chain length. © 1993 John Wiley & Sons, Inc.     

Behavior of a ruthenium-titanium oxide film electrode (RTOE) in potentiometry

Polyfunctional properties of a ruthenium-titanium oxide electrode in the absence of polarization and the possibility of its application to the potentiometric detection of iron(III) titration with an ethylenediaminetetraacetic acid solution, acid-base and redox reaction types have been demonstrated. Mechanisms of reactions determining the potentials of electrodes of this type have been investigated by a number of methods.     

Structure-property relationship of highly crosslinked rubber-iron oxide composite based on chloroprene rubber (CR) as well as on nitrile rubber (NBR); a comparative study using different models

Abstract

Highly crosslinked elastomer-iron oxide composite for grinding as well as for polishing application. With the recent introduction of organic acid-based coolants in polishing applications, the designed composites should have good resistance to oils. This investigation reports the preparation and properties of high crosslinked elastomer-iron oxide composites based on Chloroprene Rubber (CR) as well as on Nitrile Rubber (NBR) as main elastomer matrix and their comparative study. In NBR system, a small amount of natural rubber (NR) was used to improve the abrasion resistance. The crosslink density (CLD) was determined from the plateau modulus in DMA using Nielsen’s model. CLD was also determined based on the equilibrium-swelling ratio by using Flory-Rehner model. The CLD at lower cure time estimated by both methods was substantially different. Nevertheless, it converges to a common value at highly crosslinked state. Highly crosslinked CR shows 500% higher modulus at high temperature when compared to the NBR system.

Highly crosslinked elastomeric composites based on Chloroprene Rubber (CR) as well as Nitrile Rubber (NBR) with high iron oxide content were prepared. This investigation gives insights into the fabrication of composites and evaluates the network structure of highly crosslinked composites. Different models were used to characterize the elastomeric network structures in the composites.     

Thermoreversible gelation of poly(ethylene oxide) biodegradable polyester block copolymers. II

Poly(ethylene oxide)-b-poly(L-lactic acid) (PEO-PLLA) diblock copolymers were synthesized via a ring opening polymerization from poly(ethylene oxide) and l -lactide. Stannous octoate was used as a catalyst in a solution polymerization with toluene as the solvent. Their physicochemical properties were investigated by using infrared spectroscopy, ¹H-NMR spectroscopy, gel permeation chromatography, and differential scanning calorimetry, as well as the observational data of gel-sol transitions in aqueous solutions. Aqueous solutions of PEO-PLLA diblock copolymers changed from a gel phase to a sol phase with increasing temperature when their polymer concentrations are above a critical gel concentration. As the PLLA block length increased, the gel-sol transition temperature increased. For comparison, diblock copolymers of poly(ethylene oxide)-b-poly(l -lactic acid-co-glycolic acid) [PEO-P(LLA/GA)] and poly(ethylene oxide)-b-poly(dl -lactic acid-co-glycolic acid) [PEO-P(DLLA/GA)] were synthesized by the same methods, and their gel-sol transition behaviors were also investigated. The gel-sol transition properties of these diblock copolymers are influenced by the hydrophilic/hydrophobic balance of the copolymer, block length, hydrophobicity, and stereoregularity of the hydrophobic block of the copolymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2207–2218, 1999     

Curing and properties of chloroprene and butadiene rubber (CR/BR) blends cross-linked with copper(I) oxide or copper(II) oxide

This paper discusses the curing and properties of chloroprene and butadiene rubber (CR/BR) blends cross-linked with copper(I) oxide (Cu₂O) or copper(II) oxide (CuO). The results revealed that the cross-linking degree of CR/BR blends decreased with the increasing amount of butadiene rubber (BR) in the blends. The mechanical properties of cured CR/BR blends depended on the proportion of elastomers in blends, as well as on the type and amount of the cross-linking agent (Cu₂O, CuO). The cross-linking of CR/BR/Cu₂O or CR/BR/CuO blends followed according to cationic mechanism, using Lewis acid, copper(I) chloride (CuCl) or copper(II) chloride (CuCl₂) generated in situ. Additionally, the prepared compositions, both unfilled and filled, were characterized by very high resistance to flame.     

Dynamic elasticity of triblock copolymer of poly(ethylene oxide) and poly(propylene oxide) on a water surface

Dilatational viscoelasticity of adsorbed and spread films of the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer at the air-water interface is studied by the capillary waves and oscillating barrier techniques. At the surface pressure below 10 mN/m, dynamic surface properties of these films coincide with those of poly(ethylene oxide). At higher surface pressures, the results obtained indicate the desorption of poly(propylene oxide) segments from the monolayer and their interaction with poly(ethylene oxide) segments in an aqueous phase. At a surface pressure close to 19 mN/m, the behavior of adsorbed and spread poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) films becomes different. The real part of dynamic surface elasticity of spread films tends toward its maximum value (20 mN/m) and, upon further compression, films begin to dissolve. At the same time, the surface elasticity of adsorbed films decreases nearly twofold upon the achievement of the maximum value that testifies the formation of looser structure of the surface layer.     

Poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide)-g-poly(vinyl pyrrolidone): synthesis and characterization

Pluronic poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers are grafted with poly(vinyl pyrrolidone) by free radical polymerization of vinyl pyrrolidone with simultaneous chain transfer to the Pluronic in dioxane. This modified polymer has both thermal responsiveness and remarkable capacity to interact with a wide variety of hydrophilic and hydrophobic pharmaceutical agents which is very attractive for medical applications. The chemical structure of the graft copolymers was characterized by FTIR and 1H NMR spectroscopy. Polymerization conditions such as initiators, feed ratio, and reaction times are studied to obtain the ideal graft copolymer.     

Dispersion and reduction of copper oxide supported on WO3-modified Ce(0.5)Zr(0.5)O2 solid solution

XRD (X-ray diffraction), BET (Brunauer-Emmett-Teller), LRS (laser Raman spectra), XPS (X-ray photoelectron spectroscopy), and TPR (temperature-programmed reduction) are used to investigate the surface properties of CuO/WO3/Ce(0.5)Zr(0.5)O2 samples. The results indicate that (1) tungsten oxide can be highly dispersed on Ce(0.5)Zr(0.5)O2 (denoted as CZ hereafter) solid solution, with a dispersion capacity of about 0.8 mmol WO(3)/(100 m2 CZ), and comparatively, the supported tungsten oxide species are preferentially interacted with ceria component on the surface of CZ; (2) for CuO/WO3/CZ samples with a half-monolayer WO3 loading, i.e., xCu-0.4W-CZ series, the surface of CZ is only partially covered by the preloaded WO3) and the supported copper oxide species are dispersed on the remaining surface vacant sites on CZ as well as on top of the preloaded tungsten oxide, while for the samples preloaded with a full-monolayer WO3, i.e., xCu-0.8W-CZ series, only dispersed on the top of the preloaded tungsten oxide monolayer; (3) the effect of the loading amount of WO3 on the reduction property of Cu2+ ions in a series of CuO/WO3/CZ samples has been observed and tentatively attributed to the formation of WO3 monolayer on CZ and the different coordination environments of the dispersed Cu2+ ions are discussed on the basis of the consideration of the incorporation model proposed previously (Chen, Y.; Zhang, L. Catal. Lett. 1992, 12, 51).     

Effect of poly(ethylene glycol) (PEG) spacers on the conformational properties of small peptides: a molecular dynamics study

Poly(ethylene glycol) (PEG) is used as an inert spacer in a wide range of biotechnological applications such as to display peptides and proteins on surfaces for diagnostic purposes. In such applications it is critical that the peptide is accessible to solvent and that the PEG does not affect the conformational properties of the peptide to which it is attached. Using molecular dynamics (MD) simulation techniques, we have investigated the influence of a commonly used PEG spacer on the conformation properties of a series of five peptides with differing physical-chemical properties (YGSLPQ, VFVVFV, GSGGSG, EEGEEG, and KKGKKG). The conformational properties of the peptides were compared (a) free in solution, (b) attached to a PEG-11 spacer in solution, and (c) constrained to a two-dimensional lattice via a (PEG-11)(3) spacer, mimicking a peptide displayed on a surface as used in microarray techniques. The simulations suggest that the PEG spacer has little effect on the conformational properties of small neutral peptides but has a significant effect on the conformational properties of small highly charged peptides. When constrained to a two-dimensional surface at peptide densities similar to those used experimentally, it was found that the peptides, in particular the polar and nonpolar peptides, aggregated strongly. The peptides also partitioned into the PEG layer. Potentially, this means that at high packing densities only a small fraction of the peptide attached to the surface would in fact be accessible to a potential interaction partner.     

Photopolymerization kinetics of oligo(ethylene oxide) and oligo(methylene) oxide dimethacrylates

The influence of temperature on the photopolymerization kinetics of oligo(methylene) oxide and oligo(ethylene oxide) dimethacrylate series has been investigated by isothermal DSC. The DSC curves showed a rapid rise in rate due to the Trommsdorff effect, and then a slow decline. A shoulder, apparent on many of the DSC curves at low conversions, became more prominent when the cure temperature was lowered. The kinetics were relatively insensitive to the dimethacrylate structure in the early stages of the reaction, but became more dependent as the reaction proceeded. A previously derived mathematical model, which allows for the influence of diffusion on the rate constants, was used to predict the kinetics. The dependence of the maximum rate and conversion on the curing temperature were adequately described by the model. The experimentally observed shoulder on the rate curve was also predicated as was the evolution of the rate/time curves with curing temperature. Similar predictions were found when a nonsteady state version of the model was used. The radiation intensity exponent varied from 0.3 to 0.6 possibly due to chain-length effects and pseudo-first order termination, respectively. The final degree of conversion increased with curing temperature (T_cure) and was correlated with the flexibility of the dimethacrylate. These data were fitted to a theoretical expression relating the final conversion to the resin T_g and to the T_cure. © 1993 John Wiley & Sons, Inc.