Hydrophobically modified poly (acrylic acid) using calix[4]arene derivative. Ionophoric properties and extraction abilities toward alkali metal cations

p‐t‐Butyl calix[4]arene diol (distal cone) (1) was grafted with poly (acrylic acid) (PAA) to obtain hydrophobically modified PAA (PAA‐C) bearing calixarene moieties. The grafting method includes the direct esterification reaction of PAA with calixarene diol 1 which was carried out in a system of tosyl chloride (TsCl), pyridine (Py), and N,N‐dimethylformamide (DMF). The grafting yield was studied using different molar ratios of PAA to calix[4]arene diol 1, temperature, and reaction time. The chemical composition of the PAA‐C was studied by IR and ¹H NMR spectroscopy. Also, the morphology of PAA‐C was evaluated by scanning electron microscopy. The PAA‐C had different solubility and thermal properties. The extraction ability measurements of modified PAA toward alkali metal cations (Na⁺, K⁺, Cs⁺) and Ag⁺ showed a remarkable efficiency and selectivity of PAA‐C toward Na⁺. The main goal of this work was to design hydrophobically modified PAA with binding ability that is suitable for ion selective membranes and chemical sensor devices such as ion‐specific electrodes, semipermeable membranes, and quartz microbalances. Copyright © 2009 John Wiley & Sons, Ltd.     

ADSORPTION OF UO2 2+ BY POLYETHYLENE HOLLOW FIBER MEMBRANE WITH AMIDOXIME GROUP

The polyethylene (PE) membrane was prepared by the radiation-induced grafting of acrylonitrile (AN) onto PE hollow fiber and by the subsequent amidoximation of cyano groups in poly-AN graft chains. The adsorption characteristics of the chelating hollow fiber membrane was examined as the solution of UO₂ ²⁺ permeated across the chelating hollow fiber membrane. The inner and outer diameter increased with an increasing grafting yield, whereas, the pure water flux and pore diameter decreased with an increasing grafting yield. The adsorption of UO₂ ²⁺ by the chelating hollow fiber membranes increased with an increasing amidoxime group. The adsorbed amount of UO₂ ²⁺ in the uranyl acetate solution was higher than that in the uranyl nitrate solution. The adsorbed amount of UO₂ ²⁺ is higher than that of Cu²⁺ when the solution of UO₂ ²⁺ and Cu²⁺ permeated across the chelating membrane, respectively. The adsorption characteristics of UO₂ ²⁺ by the amidoxime group-chelating fiber membrane in the presence of Na¹⁺ and Ca²⁺ showed a high selectivity for UO₂ ²⁺ even though there was a high concen-tration of Na¹⁺ and Ca²⁺ in the inlet solution.     

Characterization and evaluation of commercial poly (vinylidene fluoride)‐g‐sulfonatedPolystyrene as proton exchange membrane

The possibility of developing low‐cost commercial grafted and sulfonated Poly(vinylidene fluoride) (PVDF‐g‐PSSA) membranes as proton exchange membranes for fuel cell applications have been investigated. PVDF‐g‐PSSA membranes were systematically prepared and examined with the focus of understanding how the polymer microstructure (degree of grafting and sulfonation, ion‐exchange capacity, etc) affects their methanol permeability, water uptake, and proton conductivity. Fourier transform infrared spectroscopy was used to characterize the changes of the membrane's microstructure after grafting and sulfonation. The results showed that the PVDF‐g‐PSSA membranes exhibited good thermal stability and lower methanol permeability. The proton conductivity of PVDF‐g‐PSSA membranes was also measured by the electrochemical impedance spectroscopy method. It was found that the proton conductivity of PVDF‐g‐PSSA membranes depends on the degree of sulfonation. All the sulfonated membranes show high proton conductivity at 92°C, in the range of 27 to 235 mScm⁻¹, which is much higher than that of Nafion212 (102 mScm⁻¹ at 80°C). The results indicated that the PVDF‐g‐PSSA membranes are particularly promising membranes to be used as polymer electrolyte membranes due to their excellent stability, low methanol permeability, and high proton conductivity.     

Relations entre la structure et les proprietes des membranes de polytetrafluoroethylene greffe—III. Membranes non-ionisables contenant de la poly-n-vinylpyrrolidone

Equilibrium properties (swelling) and transport phenomena (dialysis) of non-ionizable membranes, obtained by radiation grafting of N-vinylpyrrolidone onto thin PTFE films, were studied. Grafting was conducted by the direct method with monomer solutions in benzene. The overall activation energy of grafting determined between 20 and 50° is high (12.5 kcal mol^?1): the reaction is controlled by the monomer diffusion into PTFE film. The length of grafted chains increases with temperature.The molality of the membranes decreases when the temperature of grafting increases; for a given grafting ratio, the swelling is higher for membranes containing a small number of long grafts than for membranes with numerous short branches. The transfer of both ions and water is a function of the free volume in the films, it depends on the grafting ratio and is not influenced by the preparation conditions.     

Effect of Ce4+ pretreatment on swelling properties of cellulosic superabsorbents

Cellulosic superabsorbents are prepared by pretreating the wood pulp (WP) with Ce⁴⁺ initiator, followed by the graft copolymerization of acrylamide (AM) monomer onto Ce⁴⁺‐pretreated WP (Ce⁴⁺ · WP) in acidic medium and in the presence of N,N′‐methylenebisacrylamide (MBAM) cross‐linker. The rate of AM copolymerization of Ce⁴⁺ · WP is significantly faster than that of the untreated WP. The obtained polyAM (PAM)‐grafted cellulosic copolymers (PAM‐g‐Ce⁴⁺ · WP copolymers) are alkaline‐hydrolyzed to produce the water‐absorbents. As PAM grafting yield increases, the absorbency increases rapidly and reaches the maximum value at a yield of 210–240%. The maximum water and saline absorbencies are around 2500 and 50 g g^?1, respectively. The optimum feed concentration of Ce⁴⁺ pretreatment on the maximum water and saline absorbencies is 5.0 × 10^?3 mol L^?1. The water and saline absorbencies of the PAM‐g‐Ce⁴⁺ · WP water‐absorbents are remarkably higher in comparison with that of the untreated WP (with a similar grafting yield) due to uniform PAM‐grafting onto Ce⁴⁺ · WP specimen. In addition, as the amount of cross‐linker increases, the grafting yield is not changed whereas the water and saline absorbencies are remarkably decreased. Copyright © 2008 John Wiley & Sons, Ltd.     

Graft copolymerization of methyl methacrylate onto lignosulfonate by H2O2–Fe(II) redox system. I. Preparation and characterization of the graft copolymer

Graft copolymerization of methyl methacrylate onto lignosulfonate in aqueous medium was investigated. It was found that the H₂O₂–Fe(II) redox system is very effective for the grafting (E_a = 4.4 kcal/mole). The H₂O₂/Fe²⁺ ratio was the most important factor in the graft copolymerization and characteristics of the resultant graft copolymers. In most cases, polymerization for 100 min at 30°C was enough to obtain 80% conversion and 50–60% grafting efficiency. The resultant polymer mixture was subjected to extraction alternately with acetone and water, and the graft copolymer was isolated free from homopolymer and unreacted lignosulfonate. With increasing H₂O₂/Fe²⁺ ratio, the grafting ratio showed a maximum at 4, whereas the yield of graft copolymer and number of poly(methyl methacrylate) branches for every building unit of lignosulfonate increased up to a ratio of 4, both values, however, remaining constant above 4. The graft copolymer obtained for the case H₂O₂/Fe²⁺ = 4 consisted of one part of lignosulfonate and five parts of poly(methyl methacrylate). The number of branches in the graft copolymer was 6 × 10^?3/OCH³ or one every 167 guaiacyl nuclei.     

Grafting of Acrylamide On 1, 1, 2, 2-Tetra-Chloroethane Preswelled Polyethylene Terephthalate) Films Using Azobisisobutyronitrile Initiator

Abstract

Graft polymerization of acrylamide (AAm) on 1, 1, 2, 2 tetrachloro-ethane (TCE) preswelled poly(ethylene terephthalate) (PET) films were performed with chemical initiation method using asobisiso-butyronitrile (AIBN) initiator. Temperature was found to have a greater effect on the swelling then the swelling time. Variation of the graft yield with polymerization temperature, time, AIBN concentration, AAm concentration, AIBN and AAm inclusion times were investigated. The optimum temperature for grafting was found to be 70°CC. The graft yield was observed to increase with polymerization time, AAm concentration, initiator and monomer diffusion time up to a saturation graft yield and then leveled off. An increase in AIBN concentration first enhanced the percent grafting then showed a decrease. The addition of some salts (Ni²⁺, Cr³⁺, Co²⁺, Cu²⁺) on the rate of grafting was also investigated. From the temperature dependence of the initial rate of grafting, the overall activation energy was found to be 4. 1 kcal/mol and relevant rate equation have been derived. The effect of grafting on film propities, such as water absorption capacity, intrinsic viscosity were determined. Grafted films were characterized by FTIR spectros-copy and scanning electron microscopy (SEM).     

Development of an electrochemical sensor based on Schiff base for Cu(II) determination at nano level in river water and edible materials

Plasticised membranes using 2-[{(2-hydroxyphenyl)imino}methyl]-phenol (L₁) and 2-[{(3-hydroxyphenyl)imino}methyl]-phenol (L₂), have been prepared and investigated as Cu²⁺ ion-selective sensors. Effect of various plasticisers, namely, dibutyl phthalate (DBP), dibutyl sebacate (DBS), benzyl acetate (BA), o-nitrophenyloctylether (o-NPOE) and anion excluders, oleic acid (OA) and sodium tetraphenylborate (NaTPB) was studied and improved performance was observed in several instances. Optimum performance was observed with membranes of (L₁) having composition L₁ : DBS : OA : PVC in the ratio of 6 : 54 : 10 : 30 (w/w, %). The sensor works satisfactorily in the concentration range 3.2 × 10^?8–1.0 × 10^?1 mol L^?1 with a Nernstian slope of 29.5 ± 0.5 mV decade^?1 of a _cu²⁺ . The detection limit of the proposed sensor is 2.0 × 10^?8 mol L^?1 (1.27 ng mL^?1). Wide pH range (3.0–8.5), fast response time (7 s), sufficient (up to 25% v/v) non-aqueous tolerance and adequate shelf life (3 months) indicate the utility of the proposed sensor. The potentiometric selectivity coefficients as determined by matched potential method indicate selective response for Cu²⁺ ions over various interfering ions, and therefore could be successfully used for the determination of copper in edible oils, tomato plant material and river water.     

Utilisation d'electrolyte solide polymere dans les piles a combustibles alcalines

The use of a solid polymer electrolyte in alkaline fuel cells. The objective of this research was to develop a new type of cheap anion exchange membranes for use in alkaline fuel cells. The polyelectrolyte anion exchange membrane was prepared by grafting quaternary amines (DABCO, TEA) on the epichlorhydrine polymer, consolidated by reticulation. Obtained ionic conductivities are over 10⁻² S.cm⁻¹, with a concentration of positive ionic sites of a few milli-equivalents per gram of material. Measured anionic transport numbers are greater than 0.90. Membranes, which can absorb 30 to 50% of water, are quasi impervious to gases such as H₂ and 0₂ and can operate at temperatures up to 120°C. Alkaline fuel cells assembled with both types of membranes showed good performances. Particular attention was devoted to the membrane-electrode interface.     

Styrene grafted ethylene chlorotrifluoroethylene (ECTFE‐g‐PSSA) protonic membranes: Preparation,characterization, and transport mechanism

The main goal of the present work is the development of partially fluorinated, low‐cost proton exchange membranes. The styrene grafted onto commercial ethylene chlorotrifluoroethylene (ECTFE) membranes using solution grafting technique, and after that the membranes were sulfonated. Diluting styrene on ECTFE with a solvent mixture of methanol plus methylene chloride (1:1) was highly effective in promoting the grafting reaction as indicated by the increase in the degree of grafting (DG) to 21.3% compared to other solvents. The DG in ECTFE membranes increased with an increase in the monomer concentration up to 60% and then declined. Fourier transform infrared spectroscopic analysis confirmed grafting and sulfonation onto ECTFE films. The maximum value of proton conductivity for ECTFE‐g‐PSSA film with DG = 21.3% was observed to be 141 mS cm⁻¹, which is also higher than those of Nafion 212 membrane. Furthermore, the activation energy of ECTFE‐g‐PSSA membranes was obtained ranging from 8.27 to 9.726 kJ mol⁻¹. So both proton transport mechanisms (hopping and vehicle) have been commonly accepted. The mobility of the charge carriers calculated from proton conductivity data has robust dependence on the grafting yield and temperature. Moreover, the tensile strength and elongation at break ratio decreases with the increase in DG. The water and methanol uptakes increase up to 0.97% and 30%, respectively, for the highest DG value. Finally, the ECTFE‐g‐PSSA has lower cost and higher conductivity they could be better used instead of Nafion in direct methanol fuel cells.     

Proton conducting membranes based on poly(vinyl chloride) graft copolymer electrolytes

The direct preparation of proton conducting poly(vinyl chloride) (PVC) graft copolymer electrolyte membranes using atom transfer radical polymerization (ATRP) is demonstrated. Here, direct initiation of the secondary chlorines of PVC facilitates grafting of a sulfonated monomer. A series of proton conducting graft copolymer electrolyte membranes, i.e. poly(vinyl chloride)‐g‐poly(styrene sulfonic acid) (PVC‐g‐PSSA) were prepared by ATRP using direct initiation of the secondary chlorines of PVC. The successful syntheses of graft copolymers were confirmed by ¹H‐NMR and FT‐IR spectroscopy. The images of transmission electron microscopy (TEM) presented the well‐defined microphase‐separated structure of the graft copolymer electrolyte membranes. All the properties of ion exchange capacity (IEC), water uptake, and proton conductivity for the membranes continuously increased with increasing PSSA contents. The characterization of the membranes by thermal gravimetric analysis (TGA) also demonstrated their high thermal stability up to 200°C. The membranes were further crosslinked using UV irradiation after converting chlorine atoms to azide groups, as revealed by FT‐IR spectroscopy. After crosslinking, water uptake significantly decreased from 207% to 84% and the tensile strength increased from 45.2 to 71.5 MPa with a marginal change of proton conductivity from 0.093 to 0.083 S cm^?1, which indicates that the crosslinked PVC‐g‐PSSA membranes are promising candidates for proton conducting materials for fuel cell applications. Copyright © 2008 John Wiley & Sons, Ltd.     

N,N,N′,N′-Tetrabutyl-3,6-dioxaoctan-dithioamid,Ionophor mit Selektivität für Cd2+

N,N,N′,N′-Tetrabutyl-3,6-dioxaoctane-dithioamide, an Ionophore with Selectivity for Cd²⁺ The dioxa-dithioamide 3 behaves as a highly selective ionophore for Cd²⁺ in solvent polymeric membranes. It induces cation-permselectivity in these membranes with a transference number of 1 for Cd(NO₃)₂- and of 2 for CdCl₂-solutions. In the presence of a proton carrier, 3 may be used to selectively pump Cd²⁺ through membranes by coupling with a pH gradient.     

Post-irradiation time effects on the graft of poly(ethylene-alt-tetrafluoroethylene) (ETFE) films for ion exchange membrane application

Grafting of styrene followed by sulfonation onto poly(ethylene-alt-tetrafluoroethylene) (ETFE) was studied for synthesis of ion exchange membranes. Radiation-induced grafting of styrene onto ETFE films was investigated after simultaneous irradiation (in post-irradiation condition) using a ⁶⁰Co source. The ETFE films were irradiated at 20 kGy dose at room temperature and chemical changes were monitored after contact with styrene for grafting. The post-irradiation time was established at 14 days when the films were remained in styrene/toluene 1:1 v/v. After this period the grafting degree was evaluated in the samples. The grafted films were sulfonated using chlorosulfonic acid and 1, 2-dichloroethane 20:80 (v/v) at room temperature for 5 h. The membranes were analyzed by infrared spectroscopy (FTIR), differential scanning calorimeter (DSC), thermogravimetric measurements (TG) and degree of grafting (DOG). The ion exchange capacity (IEC) of membranes was determined by acid–base titration and the values for ETFE membranes were achieved higher than Nafion^® films. Preliminary single cell performance was made using pure H₂ and O₂ as reactants at a cell temperature of 80 °C and atmospheric gas pressure. The fuel cell performance of ETFE films was satisfactory when compared to state-of-art Nafion^® membranes.     

Pore-functionalized polymer membranes for preconcentration of heavy metal ions

Functionalized membranes containing carboxylate, phosphate and sulfonate groups were prepared by UV-initiator induced graft polymerization of the functional monomer (acrylic acid, ethylene glycol methacrylate phosphate (EGMP) and 2-acrylamido-2-methyl-1-propane sulfonic acid) with a crosslinker (methylenebisacrylamide) in the pores of poly(propylene) host membranes. The functionalized membranes thus obtained were characterized by gravimetry, FTIR spectroscopy, radiotracers and scanning electron microscopy for the degree of grafting and water uptake, presence of functional groups, ion-exchange capacity, and physical structure of the membranes, respectively. The uptakes of Cs⁺, Ag⁺, Sr²⁺, Cd²⁺, Hg²⁺, Zn²⁺, Eu³⁺, Am³⁺, Hf⁴⁺ and Pu⁴⁺ ions in the functionalized membranes were studied as a function of acidity of the equilibrating aqueous solution. Among the functionalized membranes prepared in the present work, the EGMP-grafted membrane (with phosphate groups) showed acid concentration dependent selectivity towards multivalent metal ions like Eu³⁺, Am³⁺, Hf⁴⁺ and Pu⁴⁺. The solvent extraction studies of EGMP monomer in methyl isobutyl ketone (MIBK) solvent indicated that divalent and trivalent metal ions form complexes with EGMP in 1:2 proportion, but the distribution coefficients of trivalent metal ions were significantly higher that for the divalent ions. The uptakes of Eu³⁺ ions in monomeric EGMP (dissolved in MIBK) and polymeric EGMP (in the forms of crosslinked gel and membrane) were studied as a function of concentration of H⁺ ions in the equilibrating solution. This study indicated that polymeric EGMP has better binding ability towards Eu³⁺ as compared to monomeric EGMP. The variation of distribution coefficients of Eu³⁺/Am³⁺ in gel and membrane as a function of H⁺ ion concentration in the equilibrating aqueous solution indicated that ionic species held in the membrane and gel were not same. These results indicated that proximity of functional groups (phosphate) plays an important role in metal ion binding with polymeric EGMP.     

Synthesis and properties of fluorinated telechelic macromolecular diols prepared by radical grafting of fluorinated thiols onto hydroxyl-terminated polybutadienes

The radical grafting of C_nF_{2n +1} CH₂CH₂SH (n = 6,8) onto the double bonds of hydroxyl-terminated liquid polybutadienes (HTPBD) was studied. Various methods for investigating the amount of grafting (titration of residual thiol and fluorine analysis) were used and compared. The nature and the amount of the initiator, the quantity of thiol, the temperature and the time of the reaction. the solvent, and the microstructure of HTPBD were optimized. The kinetic aspect showed that the thiol disappeared according to a first-norder law. A method using up to 100% of grafting fluorinated mercaptan was described and standards were set up with fluorine contents of 5–59% to evaluate the physicochemical properties of these thioether group-containing polymers: solubility, refractive index, intrinsic and dynamic viscosities, and thermal characteristics (glass transition and decomposition temperatures). Finally, the surface properties of these standards showed improvements of surface energy as low as 9 mN m^?1 for a totally saturated fluorinated HTPBD. © 1993 John Wiley & Sons, Inc.     

Kinetic Studies of Donor–Acceptor Cyclopropanes: The Influence of Structural and Electronic Properties on the Reactivity

The kinetics of (3+2) cycloaddition reactions of 18 different donor–acceptor cyclopropanes with the same aldehyde were studied by in situ NMR spectroscopy. Increasing the electron density of the donor residue accelerates the reaction by a factor of up to 50 compared to the standard system (donor group=phenyl), whereas electron‐withdrawing substituents slow down the reaction by a factor up to 660. This behavior is in agreement with the Hammett substituent parameter σ. The obtained rate constants from the (3+2) cycloadditions correlate well with data from additionally studied (3+n) cycloadditions with a nitrone (n=3) and an isobenzofuran (n=4). A comparison of the kinetic data with the bond lengths in the cyclopropane (obtained by X‐ray diffraction and computation), or the ¹H and ¹³C NMR shifts, revealed no correlation. However, the computed relaxed force constants of donor–acceptor cyclopropanes proved to be a good indicator for the reactivity of the three‐membered ring.     

Reverse osmosis and fine structure of decrystallized acrylic acid grafted nylon 6 membranes

Nylon 6 film and acrylic acid grafted nylon 6 (GN) membrances were reacted with paraformaldehyde and lactic acid in the presence of acid catalysts. Decrystallized nylon 6 (DN) and decrystallized grafted nylon 6 (DGN) membranes were thus obtained. The cross sections of GN and DGN membranes were observed by a transmission electron microscope. Branch poly(acrylic acid) penetrated toward the center of the membrane and deposited homogeneously within the membrane as the extent of grafting exceeded about 100%. The reverse osmosis of DN and DGN membranes was investigated. The water permeability through the membranes was improved by the decrystallization reaction. DGN membranes with more than 100% grafting show high values of the salt rejection (Rs) as compared with DN and DGN membranes with about 50% grafting, especially at the region of the high hydraulic permeability coefficient of water (K). The relationships among Rs, K, and the volume fraction of water (H) are discussed by considering the results of the decrystallization reaction and electron microscopy.     

Preparation of PSSS‐grafted polysulfone microfiltration membrane and its rejection and removal properties towards heavy metal ions

3‐Hydroxy‐N,N‐diethylaniline (HDEA) as a tertiary aromatic amine was introduced onto the surface of chloromethylated polysulfone (CMPSF) microfiltration membrane through modification reaction, resulting in the modified membrane PSF‐DEA. A redox surface‐initiating system (DEA/APS) was constituted by the bonded tertiary aromatic amine group DEA and ammonium persulfate (APS) in aqueous solution, and so, the free radicals formed on the membrane initiated sodium p‐styrenesulfonate (SSS) as an anionic monomer to produce graft polymerization, getting the grafting‐type composite microfiltration membrane, PSF‐g‐PSSS membrane. Subsequently, the adsorption property of PSF‐g‐PSSS membrane for three heavy metal ions, Pb²⁺, Zn²⁺, and Hg²⁺ ions, was fully examined, and the rejection performance of PSF‐g‐PSSS membrane towards the three heavy metal ions was emphatically evaluated via permeation experiments. The experimental results show that by the initiating of the surface‐initiating system of DEA/APS, the graft polymerization can smoothly be carried out under mild conditions. PSF‐g‐PSSS membrane as a functional microfiltration membrane has strong adsorption ability for heavy metal ions by right of strong electrostatic interaction (or ion exchange action) between the anionic sulfonate ions on the membrane and heavy metal ions. The order of adsorption capacity is Pb²⁺ > Zn²⁺ > Hg²⁺, and the adsorption capacity of Pb²⁺ ion gets up to 2.18 μmol/cm². As the volume of permeation solutions, in which the concentrations of the three metal ions are 0.2 mmol/L, are in a range of 50 to 70 mL, the rejection rate of PSF‐g‐PSSS membrane for the three heavy metal ions can reach a level of 95%, displaying a fine rejection and removing performance towards heavy metal ions.     

Multiblock poly(Phenylene ether nitrile)s with pendant sulfoalkoxyl side chain for H2/air fuel cells at low humidity condition

A series of multiblock poly(phenylene ether nitrile)s with pendant sulfoalkoxyl side chains have been developed as proton exchange membranes for fuel cells. The membranes were obtained by a solution casting method and exhibited good thermal stability, flexibility, and mechanical strength. The membranes displayed well‐developed microphase separation, which largely contributed to their excellent ion conduction ability. One of the new membranes with a low ion exchange capacity of 1.57 mequiv g^?1 showed higher proton conductivity than Nafion 212 over the entire RH range (30–95%). The maximum power output generated in a single cell test reached up to 0.754, 0.640, and 0.414 W cm^?2 at 70 °C under 80%, 50%, and 30% RH conditions, respectively. The current density of the membrane obtained at 0.6 V (I _0.6) was as high as 640 mA cm^?2, which was much higher than that of Nafion 212 (375 mA cm^?2 at 30% RH), suggesting its superiority for a more rapid system start‐up. Furthermore, the in situ durability test at 50% RH was performed at a constant current loading, and the membrane did not show any significant voltage reduction over the 400 h testing period. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1940–1948     

Investigation of proton conductivity of anhydrous proton exchange membranes prepared via grafting vinyltriazole onto alkaline‐treated PVDF

This work uses a simple “grafting through” approach in the preparation of anhydrous poly(vinylidene fluoride) (PVDF)‐g‐PVTri polymer electrolyte membranes (PEMs). Alkaline‐treated PVDF was used as a macromolecule in conjunction with vinyltriazole in the graft copolymerization. The obtained polymer was subsequently doped with triflic acid (TA) at different stoichiometric ratios with respect to triazole units and the anhydrous PEMs (PVDF‐g‐PVTri‐(TA)_x) were prepared. All samples were characterized by FTIR and ¹H NMR. The composition of PVDF‐g‐PVTri was determined by energy dispersive spectroscopy. Thermal properties of the membranes were examined by thermogravimetric analysis and differential scanning calorimetry. The surface roughness and morphology of the membranes were studied using atomic force microscopy, X‐ray diffraction, and scanning electron microscopy. PVDF‐g‐PVTri‐(TA)₃ (C3‐TA₃) with a degree of grafting of 47.22% showed a maximum proton conductivity of 0.09 S cm^?1 at 150 °C and anhydrous conditions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1885–1897