The Synthesis of Special Block Copolymers Using a Reaction Calorimeter

Summary : The paper provides experimental results about an easy and versatile method to produce amphiphilic block copolymers, block copolymer particles, and even inorganic – polymeric nano-composites via aqueous heterophase polymerization. Special emphasis is placed on the morphology and colloidal properties of some non-ionic di- and triblock copolymer particles with poly(ethylene glycol) of 10⁶ g/mol molecular weight as hydrophilic block as well as di-stimuli-responsive block copolymers containing both a poly(N-isopropyl acrylamide) and a poly(ionic liquid) block.     

Heterophase Polymerization as Synthetic Tool in Polymer Chemistry for Making Nanocomposites

Summary: The paper considers various possibilities to produce inorganic – polymeric nanocomposites via aqueous heterophase polymerization. Special emphasis is placed on strategies to synthesize nanocomposite particles via joint nucleation or joint polymerization. The former strategy is used to make composite particles with CaCO₃ as inorganic component. The strategy of joint polymerization takes advantage from the condition that aqueous heterophase polymerization is a convenient possibility to synthesize amphiphilic block copolymers. This method relies on the fact that polymeric radicals can survive in isolated latex particles that are stabilized by hydrophilic blocks. This strategy can be successfully applied to produce silica-containing block copolymer particles in a one-step procedure.     

Preparation and Application of Double Hydrophilic Block Copolymer Particles

The preparation of some unique block copolymers and block copolymer particles via radical heterophase polymerization is described. Special emphasis is placed on double hydrophilic block copolymers such as poly(styrene sulfonic acid)-b-poly(methacrylic acid) diblock copolymer and double hydrophilic block copolymer particles consisting of both hydrophilic shells and cross-linked hydrophilic cores. Examples are given for the application of such particles as adsorbents, nano-reactors for chemical synthesis, and as colloidal stabilizers in both heterophase polymerization and biomineralization reactions.     

全亲水丙烯酰胺/丙烯酸类梳型聚合物的合成及双重响应性聚集行为

以引发剂量的壳聚糖 (CS)为母体骨架,通过与丙烯酰胺 (AM)和丙烯酸 (AA)连续的自由基聚合反应,制备了一种全亲水丙烯酰胺/丙烯酸类梳型聚合物 (CS-PAM/PAA).聚合物中丙烯酰胺和丙烯酸的组成比例可通过控制反应时间调节,并可通过核磁共振碳谱定量计算.该聚合物具有全亲水嵌段共聚物的特性,在水溶液中具有良好的pH响应性和离子响应性.聚合物溶于水并在酸性条件下自组装形成囊泡结构的聚集体,多价金属离子(如Tb³⁺离子)也可以引起聚合物的响应聚集.     

原子转移自由基聚合(ATRP)在二氧化硅表面接枝中的应用

ATRP方法是在二氧化硅(SiO2)表面接枝聚合物的一种有效方法.通过硅烷偶联剂把ATRP引发剂键接到SiO2表面,然后进行表面ATRP聚合,可以在SiO2表面接枝各种均聚物、嵌段共聚物、超支化聚合物.聚合可以在有机溶剂或水中进行.把ATRP方法同其它聚合方法如氮氧稳定自由基聚合或开环聚合相结合,可以在SiO2表面接枝复杂结构的聚合物如V型嵌段共聚物、梳型共聚物等.SiO2表面ATRP聚合可以通过外加引发剂或外加二价铜来实现聚合可控.     

Polymer dispersions as intermediate state during the synthesis of specialty polymers

Heterophase polymerization in combination with ceric ion redox initiation offers some unique features with respect to the preparation of block copolymers and block copolymer particles. Various kinds of amphiphilic multi-block copolymers as well as electrosterically or sterically stabilized particles are easy accessible. A special feature of these particles is that they may consists of two different hydrophilic blocks and thus, leading to particles with a structured hydrophilic shell. The amphiphilic multiblock copolymers are used to form a new class of polymer dispersions by self-organization so-called polymeric colloidal complexes. In general, the particles of these complexes are structured and exhibit very often multiple morphologies. This principle of formation of polymer colloids is an easy way to prepare particles with an unusual morphology such as Janus-type particles.     

The control of structure in emulsion polymerization

Free-radical addition polymerization can be carried out using four different processes: mass or bulk, solution, suspension, and emulsion polymerization. Of these four processes, emulsion polymerization is unique because it is a heterogeneous process, in which the polymerization reactions can take place in three different sites: in the continuous aqueous phase, on the surface of growing particles, and within the growing particles. This unique feature of emulsion polymerization offers many possibilities for designing different polymers and latexes: e.g., high-molecular-weight polymers, uniform copolymers, copolymers of difficult-to-copolymerize monomers, functionalized (surface-modified) latexes, uniform size latex particles, grafted latexes, and structured latexes having core-shell, microdomain structures, interpenetrating polymer networks, etc. This paper will describe several aspects of the control of structure in emulsion polymerization.     

Polymerization of water soluble cationic vinyl monomers

This paper summarizes investigations on the radical polymerization of cationic vinyl monomers with respect to the peculiarities of the reaction in aqueous solution, the synthesis of model polymers and polyelectrolytes with regular structure as well as to a new process of stabilized precipitation polymerization. The rate of polymerization depends on the ionic strength of the solution. Random copolymers of diallyldimethylammonium chloride and acrylamide with variable charge density but equal molecular weight were synthesized by a feeding technique. Block copolymers consisting of charged and uncharged monomelic units with different hydrophilicity are available using macroazoinitiators. The novel polymers are powerful stabilizers in the precipitation polymerization of water soluble cationic vinyl monomers in aqueous salt solution leading to a dispersion of fine polymer particles. Polyampholytes with alternating positively and negatively charged monomelic units in the backbone were obtained by cyclocopolymerization of diallylanmine compounds and derivatives of maleic acid.     

Synthesis and characterization of amphiphilic diblock copolymers of methyl tri(ethylene glycol) vinyl ether and isobutyl vinyl ether

Water-soluble diblock copolymers of methyl tri(ethylene glycol) vinyl ether (hydrophilic block) and isobutyl vinyl ether (hydrophobic block) of different molecular weights and composition were synthesized by living cationic polymerization. The molecular weight and comonomer composition of these copolymers were determined by GPC and ¹H NMR spectroscopy, respectively. Aqueous solutions of the copolymers were characterized in terms of their micellar behavior using dynamic light scattering, aqueous GPC, and dye solubilization. All the copolymers formed aggregates with the exception of a diblock copolymer with only two hydrophobic monomer units. The micellar hydrodynamic size scaled with the 0.61 power of the number of hydrophobic units, in good agreement with a theoretical exponent of 0.73. An increase in the length of the hydrophobic block at constant hydrophilic block length or an increase in the overall polymer size at constant block length ratio both resulted in lower critical micelle concentrations (cmcs). The cloud points of 1% w/w aqueous solutions of the polymers were determined by turbidimetry. An increase in the length of the hydrophobic block at constant hydrophilic block length caused a decrease in the cloud points of the copolymers. However, an increase in the overall polymer size at constant block length ratio led to an increase in the cloud point. © 1996 John Wiley & Sons, Inc.     

Ternary copolymers of acrylic acid, <Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide,and butyl acrylate: Synthesis and aggregative behavior in dilute solutions

Narrowly dispersed hydrophilic block and random copolymers of acrylic acid and N-isopropylacrylamide of various compositions and molecular masses are synthesized for the first time by controlled radical polymerization via the reversible addition-fragmentation chain-transfer mechanism. The copolymers are used for the synthesis of ternary copolymers with n-butyl acrylate. As shown by dynamic light scattering, the resulting amphiphilic copolymers can form stable dispersions in diluted aqueous solutions. It is found that the effective hydrodynamic radii of dispersion particles may be controlled via variation both in the primary structure of the ternary copolymer, i.e., the amount and sequence of hydrophilic and hydrophobic units, and in the external stimuli, i.e., the temperature and pH of a solution.     

Temperature responsive methacrylamide polymers with antibacterial activity

<正>A new methacrylamide monomer,hexylamine methacrylamide(MAHA),was synthesized and used in polymerizations.The homopolymer of MAHA and its copolymers were synthesized by free radical polymerization techniques with N-isopropyl acrylamide(NIPAAm) in two different compositions.The quaternization of the homopolymer and copolymers were carried out using 1-bromopropane.The copolymers with NIPAAm and a low MAHA content showed temperature-responsive behavior in an aqueous environment.The lower critical solution temperatures(LCSTs) of these polymers varied between 32℃and 44℃.The LCSTs of quaternized copolymers were higher than those of neutral copolymers because they were more hydrophilic.The obtained homopolymers and copolymers were tested for antibacterial activities against S.aureus and E.coli.The quaternized water-soluble copolymers showed antibacterial activities against S.aureus.The quaternization resulted in the synthesis of both antibacterial and temperature-responsive copolymers.     

Double‐Hydrophilic Block Copolymers: Synthesis and Application as Novel Surfactants and Crystal Growth Modifiers

Double‐hydrophilic block copolymers are a new class of amphiphilic molecules of rapidly increasing importance with unique and fascinating properties potentially connecting materials science, pharmacy, biochemistry and polymer science. Characteristic of these polymers is their application in aqueous environments and that amphiphilicity is just induced in the presence of a substrate or by temperature and pH changes, respectively. Their chemical structure may be tuned for a wide range of applications covering as different aspects as stabilization of colloids, crystal growth modification, induced micelle formation, polyelectrolyte complexing towards novel drug carrier systems. As the potential of this novel polymer class is relatively unexplored yet, it can be expected that more applications will arise due to the possibility to adapt the chemical structure to either the desired substrate in contact with water or the stimulus for the induction of structural changes. This review describes the synthetic strategies towards these AB block copolymers, as well as their applications.     

Synthesis and Self-Assembly Behaviors of Four-Arm Star Block Copolymers Poly(ϵ-caprolactone)-b-poly(2- (diethylamino) ethyl methacrylate)) in Aqueous Solution

Four-arm star block polymers consisting of hydrophobic poly(?-caprolactone) (PCL) block and hydrophilic poly(2-(diethylamino) ethyl methacrylate)) (PDEAEMA) block were successfully synthesized by ring opening polymerization (ROP) and atom transfer radical polymerization (ATRP). Chain lengths of PDEAEMA segments were varied to obtain a series of star copolymers with different hydrophilic/hydrophobic ratio, which were desired for self-assembly study. Dynamic light scattering (DLS) and transmission electron microscopic (TEM) were used to study their self-assembly behavior. In the PBS solution with different pH value, the star polymers formed micelles or nanoparticles. Furthermore, the morphologies of the micelles were also pH-dependent. Critical micelle concentrations of star copolymers changed from 5.0 to 17.5 mg/L with the increase of hydrophilic block length or the pH decrease. Moreover, a steady increase was found on the micelles diameters when the pH decreased from 7.0 to 3.0. The low CMC value and slight changes on micelle diameter indicated that the micelle remained stable under the changing external stimulus.     

SYNTHESIS AND CHARACTERIZATION OF WATER-SOLUBLE BLOCK COPOLYMERS WITH AN END-TAGGED NAPHTHALENE PROBE

Water-soluble A-B block copolymers of 2-perfluoroethyl-2-oxazoline or 2-pentyl-2-oxazoline as hydrophobic monomers and 2-methyl-2-oxazoline as hydrophilic monomer were prepared by means of the living cationic ring-opening polymerization. The polymerization was initiated with N-methyl-2-(1-naphthyl)-2-oxazolinium trifluoromethanesulfonate as fluorescence label followed by sequential addition of the hydrophobic and the hydrophilic monomer. The polymerization was monitored by ¹H NMR spectroscopy and gel permeation chromatography (GPC) measurements. The results revealed that fluorophilic block copolymers can be prepared by this method while lipohilic block copolymers are not accessible by this monomer sequence. Micelle formation of the fluorophilic block copolymers in aqueous solution was studied by means of steady-state fluorescence spectroscopy which confirmed strong intermolecular excimer formation of the terminal bounded naphthalene moiety. In chloroform as a good solvent for both blocks, only monomer fluorescence could be observed.     

Facile syntheses of surface-functionalized micelles and shell cross-linked nanoparticles

Block copolymer micelles and shell cross-linked nanoparticles (SCKs) presenting Click-reactive functional groups on their surfaces were prepared using two separate synthetic strategies, each employing functionalized initiators for the controlled radical polymerization of acrylate and styrenic monomers to afford amphiphilic block copolymers bearing an alkynyl or azido group at the α-terminus. The first route for the synthesis of the azide-functionalized nanostructures was achieved via sequential nitroxide-mediated radical polymerization (NMP) of tert-butyl acrylate and styrene, originating from a benzylic chloride-functionalized initiator, followed by deprotection of the acrylic acids, supramolecular assembly of the block copolymer in water and conversion of the benzylic chloride to a benzylic azide. In contrast, the second strategy utilized an alkynyl-functionalized reversible addition fragmentation transfer (RAFT) agent directly for the RAFT-based sequential polymerization of tetrahydropyran acrylate and styrene, followed by selective cleavage of the tetrahydropyran esters to give the α-alkynyl-functionalized block copolymers. These Click-functionalized polymers, with the functionality located at the hydrophilic polymer termini, were then self-assembled using a mixed-micelle methodology to afford surface-functionalized “Clickable” micelles in aqueous solutions. The optimum degree of incorporation of the Click-functionalized polymers was investigated and determined to be ca. 25%, which allowed for the synthesis of well-defined surface-functionalized nanoparticles after cross-linking selectively throughout the shell layer using established amidation chemistry. Functionalization of the chain ends was shown to be an efficient process under standard Click conditions and the resulting functional groups revealed a more “solution-like” environment when compared to the functional group randomly inserted into the hydrophilic shell layer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5203–5217, 2006     

The polymerization of acrylic acid in the presence of copolymers containing interacting and non-interacting groups

There has been a kinetic examination of the polymerization of acrylic acid in dilute aqueous solution in the presence of copolymers of vinyl pyrrolidone with acrylamide or styrene. In general, the characteristics of the polymerizations are very similar to those found in the presence of polyvinyl pyrrolidone homopolymer, but the definite differences, taken in conjunction with gravimetric data on the polymer complexes, can be explained by the fact that acrylamide is hydrophilic while styrene is hydrophobic. The use of the copolymers has permitted an assessment of the effect of dilution of monomer adsorbed on the interacting polymer.     

Versatile cobalt(Salen-NEt2) for aqueous cobalt-mediated radical polymerization

Cobalt-mediated radical polymerization (CMRP) has enabled the polymerization of a wide range of monomers with predictable molecular parameters and well-defined compositions and architectures. However, the synthesis of hydrophilic polymers by CMRP directly in the aqueous phase is still challenging. Herein, a handy cobalt complex was developed to perform CMRP of N-vinylpyrrolidone (NVP), 2-hydroxyethyl acrylate (HEA), and N,N-dimethylacrylamide (DMA) with linearly increased molecular weight, low polydispersity values, and smoothly shifted gel permeation chromatography (GPC) traces. The chain extensions of NVP, HEA, and DMA revealed the well chain-end fidelity for the synthesis of block copolymers. Moreover, the poly(N-vinylpyrrolidone)-block-poly(vinyl acetate) (PVP-b-PVAc) amphiphilic block copolymer colloidal solution was achieved directly in aqueous phase by cobalt-mediated radical polymerization-induced self-assembly (CMR-PISA), forming the nanoparticles consisting of a hydrophilic PVP corona and a hydrophobic PVAc core. This new mediator opens the opportunity for the synthesis of various hydrophilic (co)polymers in an environmentally friendly manner.     

Investigation of the influence of the architectures of poly(vinyl pyrrolidone) polymers made via the reversible addition–fragmentation chain transfer/macromolecular design via the interchange of xanthates mechanism on the stabilization of suspension polymerizations

Linear, star, and block copolymers based on poly(vinyl pyrrolidone) (PVP) were synthesized with the macromolecular design via the interchange of xanthates (MADIX) process for use as potential stabilizers in suspension polymerization. The design of the leaving group of the dithioxanthate‐based transfer agent was shown to be key to the successful preparation of well‐defined PVP architectures. A linear correlation of the monomer conversion and molecular weight was found in the synthesis of star polymers, whereas the molecular weight distribution remained narrow (polydispersity index < 1.3). Significant side reactions, which typically broaden the molecular weight distribution when R‐designed MADIX agents are used, were absent. The living behavior of the PVP polymerization was furthermore confirmed via chain extension with vinyl acetate, which resulted in the formation of PVP–PVAc block copolymers [where PVAc is poly(vinyl acetate)]. The prepared polymers were used as stabilizers in suspension polymerization to prepare crosslinked poly(vinyl neodecanoate)/ethylene glycol dimethacrylate microspheres. The ratio of the interfacial tension of the aqueous and monomer phases and the overall viscosity were found to have an effect on the diameter of the particles, with PVP star polymers as stabilizers resulting in smaller particles. A smaller interfacial tension, measured when star polymers and block copolymers were used, resulted in the appearance of smaller particles, probably because of more breakup events of the monomer droplets and the enhanced stabilization of the particle surface area. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4372–4383, 2006     

Thermoresponsive hydrogels from symmetrical triblock copolymers poly(styrene-block-(methoxy diethylene glycol acrylate)-block-styrene)

A series of symmetrical, thermo-responsive triblock copolymers was prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization, and studied in aqueous solution with respect to their ability to form hydrogels. Triblock copolymers were composed of two identical, permanently hydrophobic outer blocks, made of low molar mass polystyrene, and of a hydrophilic inner block of variable length, consisting of poly(methoxy diethylene glycol acrylate) PMDEGA. The polymers exhibited a LCST-type phase transition in the range of 20-40 °C, which markedly depended on molar mass and concentration. Accordingly, the triblock copolymers behaved as amphiphiles at low temperatures, but became water-insoluble at high temperatures. The temperature dependent self-assembly of the amphiphilic block copolymers in aqueous solution was studied by turbidimetry and rheology at concentrations up to 30 wt %, to elucidate the impact of the inner thermoresponsive block on the gel properties. Additionally, small-angle X-ray scattering (SAXS) was performed to access the structural changes in the gel with temperature. For all polymers a gel phase was obtained at low temperatures, which underwent a gel-sol transition at intermediate temperatures, well below the cloud point where phase separation occurred. With increasing length of the PMDEGA inner block, the gel-sol transition shifts to markedly lower concentrations, as well as to higher transition temperatures. For the longest PMDEGA block studied (DP(n) about 450), gels had already formed at 3.5 wt % at low temperatures. The gel-sol transition of the hydrogels and the LCST-type phase transition of the hydrophilic inner block were found to be independent of each other.     

Direct Synthesis of Double Hydrophilic Statistical Di‐ and Triblock Copolymers Comprised of Acrylamide and Acrylic Acid Units via the MADIX Process

Double hydrophilic statistical, diblock and triblock copolymers comprised of acrylamide and acrylic acid units have been synthesized in aqueous medium using the MADIX process. Starting from an either monofunctional or difunctional xanthate, the resulting AB and ABA‐type double hydrophilic block copolymers (DHBC) exhibited molar masses predetermined by the initial monomer/xanthate precursor molar ratio and polydispersity indices in the range 1.2–1.5. Batch copolymerizations yielded well‐defined statistical copolymers that were chain‐extended for the synthesis of novel poly‐ (acrylic acid‐stat‐acrylamide)‐block‐polyacrylamide DHBC.