A new controllable approach to synthesize hyperbranched poly(siloxysilanes)

A new controllable approach to synthesize hyperbranched poly(siloxysilanes) via hydrosilylation of A₂‐ and B′B_x‐type monomers was developed in this work. A₂ monomers (dimethylbis(dimethylsiloxy)siloxane and tetramethyldisiloxane), B′B_x monomers (methylvinyldiallylsilane and vinyltriallylsilane), and the resultant hyperbranched poly(siloxysilanes) were well characterized using FTIR, ¹H NMR, ¹³C NMR, ²⁹Si NMR, and SEC/MALLS. The In situ FTIR results indicate that the controllable polymerization can be carried out quickly and the reaction process was obviously performed in two stages. At the first stage, silicon hydride selectively reacts with vinyl silane groups, which produces intermediate structures with one Si? H and two (or three) allyl groups. Consequently, at the second stage, these intermediates act as new AB₂ (or AB₃) type monomers and continue to be self‐polymerized to generate hyperbranched polymers. By this novel controllable approach, molecular weights and their polydispersity of the resulted hyperbranched poly(siloxysilanes) can be conveniently regulated via adjusting the process parameters, such as feeding ratio of two monomers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2708–2720, 2008     

Synthesis and properties of hyperbranched polyurethanes,hyperbranched polyurethane copolymers with and without ether and ester groups using blocked isocyanate monomers

Starting from 3,5‐diamino benzoic acid, 2‐hydroxy propyl[3,5‐bis{(benzoxycarbonyl)imino}]benzyl ether, an AB₂‐type blocked isocyanate monomer with flexible ether group, and 2‐hydroxy propyl[3,5‐bis{(benzoxycarbonyl)imino}]benzoate, an AB₂‐type blocked isocyanate monomer with ester group, were synthesized for the first time. Using the same starting compound, 3,5‐bis{(benzoxycarbonyl)imino}benzylalcohol, an AB₂‐type blocked isocyanate monomer, was synthesized through a highly efficient short‐cut route. Step‐growth polymerization of these monomers at individually optimized experimental conditions results in the formation of hyperbranched polyurethanes with and without ether and ester groups. Copolymerizations of these monomers with functionally similar AB monomers were also carried out. The molecular weights of the polymers were determined using GPC and the values (M_w) were found to vary from 1.5 × 10⁴ to 1.2 × 10⁶. While hyperbranched polyurethanes having no ether or ester group were found to be thermally stable up to 217 °C, hyperbranched poly(ether–urethane)s and poly(ester–urethane)s were found to be thermally stable up to 245 and 300 °C, respectively. Glass transition temperature (T_g) of polyurethane was reduced significantly when introducing ether groups into the polymer chain, whereas T_g was not observed even up to 250 °C in the case of poly(ester–urethane). Hyperbranched polyurethanes derived from all the three different AB₂ monomers were soluble in highly polar solvents and the copolymers showed improved solubility. Polyethylene glycol monomethyl ether of molecular weight 550 and decanol were used as end‐capping groups, which were seen to affect the thermal, solution, and solubility properties of polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3877–3893, 2007     

Thermoreversible nonlinear diels‐alder polymerization of furan/plant oil monomers

Novel trifunctional monomers based on renewable resources were prepared and subsequently polymerized via the Diels‐Alder (DA) polycondensation between furan and maleimide complementary moieties. Three basic approaches were considered for these nonlinear DA polycondensations, namely the use of (i) a bisfuran monomer in combination with a trismaleimide (A₂ + B₃ system) and (ii) a trisfuran monomer in conjunction with a bismaleimide (A₃ + B₂ system) leading to branched or crosslinked materials, and (iii) the use of monomers incorporating both furan and maleimide end groups (A₂B or AB₂ systems), which lead to hyperbranched structures. The application of the retro‐DA reaction to the ensuing polymers confirmed their thermoreversible character. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

The preparation of hyperbranched aromatic and aliphatic polyether epoxies by chloride‐catalyzed proton transfer polymerization from ABn and A2 + B3 monomers

Hyperbranched polymers consisting of aromatic or aliphatic polyether cores and epoxide chain‐end peripheries were prepared by proton transfer polymerization. AB₂ diepoxyphenol monomer 1 proved to be well suited for the preparation of hyperbranched aromatic polymer 2 by this proton transfer polymerization. The use of chloride‐ion catalysis, rather than conventional base catalysis, for the preparation of polymers from diepoxyphenol 1 offered a unique method to control the ultimate molecular weight of the polymer product through variations of the initial concentration of monomer 1 in tetrahydrofuran. An alternative route to hyperbranched polyether epoxies made use of commercially available or easily prepared aliphatic monomers of the types AB₂, AB₃, and A₂ + B₃. Although these aliphatic polymerizations can be initiated with a base, chloride‐ion catalysis proved most effective for controlling the polymerization. The hyperbranched epoxies were characterized by NMR spectroscopy, gel permeation chromatography, and multi‐angle laser light scattering. Chemical modification of the polymers after polymerization was carried out via nucleophilic addition on the epoxide groups or derivatization of the hydroxy substituents within the hyperbranched polymer structure. Spectroscopic measurements suggested that some such ring‐opened materials may adopt reverse unimolecular micellar structures in appropriate solution environments. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4850–4869, 2000     

Dendritic aromatic polyamides and polyimides

The syntheses and properties of dendritic and hyperbranched aromatic polyamides and polyimides are reviewed. In addition to conventional stepwise reactions for dendrimer synthesis, an orthogonal/double‐stage convergent approach and dendrimer syntheses with unprotected building blocks are described as new synthetic strategies for dendritic polyamides. Hyperbranched polyamides and polyimides composed of various repeating units are presented. Besides the self‐polycondensation of AB₂‐type monomers, new polymerization systems with AB₄, AB₈, A₂ + B₃, and A₂ + BB′₂ monomers have been developed for hyperbranched polyamides and polyimides. The copolymerization of AB₂ and AB monomers is discussed separately with respect to the effects of branching units on the properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1293–1309, 2004     

Synthesis of aromatic hyperbranched PAMAM polymers

Our preliminary results towards the synthesis of hyperbranched polyamidoamine (PAMAM) polymers as ‘dendrimer equivalents’ is described. An aromatic AB₂ bis-amino acid monomer was polymerised at 165 °C (under vacuum) and the crude mixture purified by dialysis. Analysis by GPC and MALDI-TOF mass spectroscopy showed that the purified hyperbranched polymers possessed an M_n of 2000 and a PD of 3.2.     

Hyperbranched aryl polycarbonates derived from A2B monomers versus AB2 monomers

Hyperbranched aryl polycarbonates were prepared via the polymerizations of A₂B and AB₂ monomers, which involved the condensation of chloroformate (A) functionalities with tert‐butyldimethylsilyl‐protected phenols (B), facilitated by reactions with silver fluoride. The polymerization of the A₂B monomer gave hyperbranched polycarbonates bearing fluoroformate chain ends, which were hydrolyzed to phenolic chain‐end moieties and further elaborated to tert‐butyldimethylsilyl ether groups. The polymerization of the AB₂ monomer gave tert‐butyldimethylsilyl ether‐terminated hyperbranched polycarbonates. The polymerizations were conducted at 23–70 °C in 20% acetonitrile/tetrahydrofuran in the presence of a stoichiometric excess of silver fluoride for 20–40 h to afford hyperbranched polycarbonates with weight‐average molecular weights exceeding 100,000 Da and polydispersity indices of typically 2–3. The degrees of branching were determined by a reductive degradation procedure followed by high‐performance liquid chromatography. Alternatively, the degrees of branching were measurable by solution‐state ¹H NMR analyses and agreed with the statistical 50% branching expected for the polymerization of A₂B and AB₂ monomers not experiencing constructive or destructive electronic effects on the reactivity of the multiple functional groups. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 823–835, 2002; DOI 10.1002/pola.10167     

Synthesis and characterization of new hyperbranched poly(aryl ether oxadiazole)s

A new AB₂ monomer was synthesized for use in the preparation of a hyperbranched poly(aryl ether oxadiazole) with terminal phenol functionality. The AB₂ monomer contains two phenolic groups and a single aryl fluoride group that is activated toward nucleophilic displacement by the attached oxadiazole ring. The nucleophilic substitution of the fluoride with the phenolate groups led to the formation of an ether linkage. Subsequently, a hyperbranched poly(aryl ether oxadiazole) having approximately a 44% degree of branching, as determined by a combination of model compound studies and ¹H NMR, was obtained. The terminal phenolic groups underwent facile functionalization, furnishing hyperbranched polymers with a variety of functional chain ends. The nature of the chain‐end groups had a significant influence on the physical properties of the polymers, such as the glass‐transition temperature and their solubility. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3851–3860, 2001     

Surface-relief-grating formation behavior of two hyperbranched azo polymers

In this work,surface-relief-grating formation behavior was studied by using two hyperbranched azo polymers.The hyperbranched polymers containing pseudo-stilbene type azo chromophores throughout the hyperbranched structure were synthesized by step-growth polycondensation of AB₂ type monomers.The AB₂ monomer,4-（4’-（bis（2-chloroethyl）amino）-phenylazo） benzoic acid（BAA）,was prepared through azo-coupling reaction between N,N’-bis（2-chloroethyl）aniline and 4- aminobenzenic acid.The another AB₂ monomer,4-（4’-（bis（2-chloroethyl）amino）phenylazo）-3-nitro-benzoic acid（BANA）, was prepared through azo-coupling reaction between N,N-bis（2-chloroethyl）aniline and 3-nitro-4-aminobenzcnic acid.The hyperbranched polymers（PBAA and PBANA） were prepared through nucleophilic substitution reaction of BAA and BANA, respectively.The polymers synthesized were characterized by using spectroscopic methods and thermal analysis.The photoinduced dichroism and photo-induced surface-relief-grating（SRG） formation of the hyperbranched polymers were investigated upon irradiation with Ar⁺ laser at 488 nm.PBAA shows typical photoinduced dichroism SRG formation behavior.On the contrary,PBANA does not show the photoresponsive properties.The results indicate that the nitro at the ortho position of azo group of PBANA shows the effect of inhibiting the photoinduced variations.The effect can be attributed to the blockage of the trans-cis isomerization of the azobenzene moieties by the steric hindrance.     

Highly branched aromatic polymers prepared by single step syntheses

Highly branched polyphenylenes, polyphenylene ethers, aromatic polyesters and polyamides synthesized from AB₂ type monomers are reviewed. Polyphenylenes were obtained by aryl-aryl coupling reactions of 3,5-dihalo-phenyl organometallic reagents. ¹³C NMR indicates about 70% branching efficiency. A T_gat 236°C was observed, but the polymer did not form films. Polyethers were prepared by oxidative coupling of 2,4,6-tribromophenol and 2,4-dibromophenol. The former monomer gave high molecular weight polymers but the latter monomer did not polymerize well. Condensation of 3,5-diaminobenzoic acid (I) and 3-aminoisophthalic acid derivatives in an amide solvent gave lyotropic hyperbranched aromatic polyamides. The GPC indicated a large degree of polymer aggregation in the amide solvent in the absence of a complexing salt.     

Facile synthesis and characterization of hyperbranched poly(ether amide)s generated from Michael addition polymerization of in situ created AB2 monomers

A new straightforward strategy for synthesis of novel hyperbranched poly (ether amide)s from readily available monomers has been developed. By optimizing the reaction conditions, the AB₂‐type monomers were formed dominantly during the initial reaction stage. Without any purification, the AB₂ intermediate was subjected to further polymerization in the presence (or absence) of an initiator, to prepare the hyperbranched polymer‐bearing multihydroxyl end‐groups. The influence of monomer, initiator, and solvent on polymerization and the molecular weight (MW) of the resultant polymers was studied thoroughly. The MALDI–TOF MS of the polymers indicated that the polymerization proceeded in the proposed way. Analyses of ¹H NMR and ¹³C NMR spectra revealed the branched structures of the polymers obtained. These polymers exhibit high‐moderate MWs and broad MW distributions determined by gel permeation chromatography (GPC) in combination with triple detectors, including refractive index, light scattering, and viscosity detectors. In addition, the examination of the solution behavior of these polymers showed that the values of intrinsic viscosity [η] and the Mark–Houwink exponent α were remarkably lower compared with their linear analogs, because of their branched nature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4309–4321, 2007     

Synthesis of hyperbranched aromatic polyamides by direct polycondensation

Some hyperbranched aromatic polyamides have been synthesized by direct polycondensation using the modified Higashi's method. Structures of the above polymers have been realized taking in proper account the analogies with amide group sequences of poly(p-phenyleneterephthalamide) (PPDT) and poly(p-benzamide) (PBA). Therefore, AB₂- type monomers as well as suitable combinations of different bi- and trifunctional reactants (AA + B₃) (e.g., p-phenylenediamine + trimesic acid or other trifunctional acids) have been considered. For the latter systems, network formation has been minimized. In the present paper, our results on their direct polyamidation together with some preliminary characterization data on the resultant hyperbranched aramids are given.     

Hyperbranched copolymers made from A2, B2 and BB′2type monomers (iv)

The new approach for synthesis of hyperbranched polymers from commercially available A₂ and type monomers was extended to synthesize hyperbranched copolymers. In this work, hyperbranched copoly(sulfone-amine) was prepared by copolymerization of divinyl sulfone (A₂) with 4,4′-trimethylenedipiperidine (B₂) and N-ethylethylenediamine (BB’₂). During the reaction, secondary-amino groups of B₂ and BB’₂ monomers react rapidly with vinyl groups of A₂ monomers within 35 s, generating a type of intermediate containing one vinyl group and two reactive hydrogen atoms. Now the intermediates can be regarded as a new type monomer, which further polymerizes to form hyperbranched copoly(sulfone-amine). The polymerization mechanism was investigated with FTIR and LC-MSD. The degree of branching (DB) of hyperbranched copolymers increased with decreasing the ratio of 4, 4′-trimethylenedipiperidine to N-ethylethylenediamine, so DB can be controlled. When the initial mole ratio of B₂ to BB′₂was equal to or higher than four,r≥4, resulted copolymers were semi-crystalline, while copolymers withr3 were amorphous.     

Chain-growth polymerization of azide–alkyne difunctional monomer: Synthesis of star polymer with linear polytriazole arms from a core

This article reports a chain-growth coupling polymerization of AB difunctional monomer via copper-catalyzed azide–alkyne cycloaddition (CuAAC) reaction for synthesis of star polymers. Unlike our previously reported CuAAC polymerization of AB _n (n ≥ 2) monomers that spontaneously demonstrated a chain-growth mechanism in synthesis of hyperbranched polymer, the homopolymerization of AB monomer showed a common but less desired step-growth mechanism as the triazole groups aligned in a linear chain could not effectively confine the Cu catalyst in the polymer species. In contrast, the use of polytriazole-based core molecules that contained multiple azido groups successfully switched the polymerization of AB monomers into chain-growth mechanism and produced 3-arm star polymers and multi-arm hyperstar polymers with linear increase of polymer molecular weight with conversion and narrow molecular weight distribution, for example, M_w/M_n ~ 1.05. When acid-degradable hyperbranched polymeric core was used, the obtained hyperstar polymers could be easily degraded under acidic environment, producing linear degraded arms with defined polydispersity. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 84–90     

Conformation of nonideal hyperbranched polymer in ABn (n = 2, 4) type polymerization

The conformation of hyperbranched polymers from one pot polymerization with AB_n (n = 2, 4) type monomers, applying the reactive 3D bond fluctuation lattice model, are systematically studied using scaling relation R ～ N^λ, where R is the radius of gyration or the hydrodynamic radius of a hyperbranched polymer with the degree of polymerization N. The exponent λ was calculated at various monomer concentrations and group conversions. When the concentration of monomers with the equal reactivity of B groups increases from 0.1 to 0.9, the exponents λ_g and λ_h (corresponding to the radius of gyration and hydrodynamic radius, respectively) are in the ranges of 0.51–0.37 and 0.41–0.34 at the full conversion of A groups. Especially, we find that λ_g decreases linearly with the reaction conversion increasing. The ratio of z‐average radius, R_gz/R_hz, ranges from 1.08 to 1.32 and indicates that hyperbranched polymer is soft macromolecule with penetrable structure. In the case of AB₂ type monomer with unequal reactivities, λ displays complicated dependence on the reaction conversion and the reactivity ratio. The results of our simulation are consistent with those of experiments and theories, and valuable in better understanding the fundamental properties of hyperbranched polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 610–616, 2010     

Synthesis and characterization of hyperbranched aromatic poly(ether imide)s with terminal amino groups

We synthesized an AB₂‐type monomer, 4‐{4‐[di(4‐aminophenyl)methyl]phenoxy}phthalic acid, which contained one phthalic acid group and two aminophenyl functionalities. The direct self‐polycondensation of the AB₂‐type monomer in the presence of triphenylphosphite as an activator afforded a hyperbranched poly(ether imide) with a large number of terminal amino groups. This polymer was characterized with ¹H NMR and IR spectroscopy. The degree of branching of the hyperbranched poly(ether imide) was approximately 56%, as determined by a combination of model compound studies and an analysis of ¹H NMR spectroscopy integration data. The terminal amino groups underwent functionalization readily. The solubility and thermal properties of the resulting polymers depended on the nature of the chain end groups. In addition, the hyperbranched poly(ether imide) was grafted with polyhedral oligomeric silsesquioxane (POSS). Transmission electron microscopy analysis revealed that the grafted POSS molecules aggregated to form a nanocomposite material. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3726–3735, 2003     

Unimolecular micelles and reverse micelles based on hyperbranched polyethers—Comparative study of AB2 + A‐R and A2 + B3 + A‐R type strategies

Core‐shell type hyperbranched polymers that are capable of forming unimolecular micelles and reverse micelles in aqueous and hydrocarbon medium, respectively, were synthesized via two approaches, namely AB₂ + A‐R and A₂ + B₃ + A‐R type copolymerizations. In case of micelle‐forming polymers, an AB₂ monomer carrying a decamethylene spacer was used along with heptaethylene glycol monomethyl ether (HPEG) as the A‐R type comonomer. One the other hand, for the preparation of reverse micelle‐forming polymers, an AB₂ monomer containing an oligo(oxyethylene) spacer was used along with cetyl alcohol as the A‐R type comonomer. The former was readily soluble in water while the latter was soluble in hydrocarbon solvents like hexane. NMR spectral studies confirmed that both the approaches generated highly branched structures wherein about 65–70% of the terminal B groups were capped by the A‐R comonomer. Dye‐uptake measurements revealed that the polymers prepared via the AB₂ + A‐R approach exhibited a significantly larger uptake compared with those prepared via the A₂ + B₃ + A‐R approach. This suggests that the AB₂ + A‐R approach generates hyperbranched polymers with better defined core‐shell topology when compared with polymers prepared via the A₂ + B₃ + A‐R approach, which is in accordance with previous studies that suggest that A₂ + B₃ approach yields polymers with significantly lower branching levels and consequently less compact structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 80–91, 2009     

Hyperbranched copolymers made from A2, B2 and BB′2type monomers (iv)

The new approach for synthesis of hyperbranched polymers from commercially available A₂ and type monomers was extended to synthesize hyperbranched copolymers. In this work, hyperbranched copoly(sulfone-amine) was prepared by copolymerization of divinyl sulfone (A₂) with 4,4′-trimethylenedipiperidine (B₂) and N-ethylethylenediamine (BB’₂). During the reaction, secondary-amino groups of B₂ and BB’₂ monomers react rapidly with vinyl groups of A₂ monomers within 35 s, generating a type of intermediate containing one vinyl group and two reactive hydrogen atoms. Now the intermediates can be regarded as a new type monomer, which further polymerizes to form hyperbranched copoly(sulfone-amine). The polymerization mechanism was investigated with FTIR and LC-MSD. The degree of branching (DB) of hyperbranched copolymers increased with decreasing the ratio of 4, 4′-trimethylenedipiperidine to N-ethylethylenediamine, so DB can be controlled. When the initial mole ratio of B₂ to BB′₂was equal to or higher than four,r≥4, resulted copolymers were semi-crystalline, while copolymers withr3 were amorphous.     

Self‐controlled synthesis of hyperbranched poly(ether‐ketone)s from A2 + B3 approach in poly(phosphoric acid)

Self‐controlled synthesis of hyperbranched poly(ether‐ketone)s (HPEKs) were prepared from “A₂ + B₃” approach by using different monomer solubility in reaction medium. 1,3,5‐Triphenoxybenzene as a hydrophobic B₃ monomer was reacted with commercially available terephthalic acid or 4,4′‐oxybis(benzoic acid) as a hydrophilic A₂ monomer in a hydrophilic reaction medium, polyphosphoric acid (PPA)/phosphorous pentoxide (P₂O₅). The resultant HPEKs were soluble in various common organic solvents and had the weight‐average molecular weight in the range of 3900–13,400 g/mol. The results implied that HPEKs were branched structures instead of crosslinked polymers. The molecular sizes and shapes of HPEKs were further assured by morphological investigation with scanning electron microscopy (SEM) and atomic force microscopy (AFM). Hence, the applied polymerization condition was indeed strong enough to efficiently facilitate polycondensation via “direct” Friedel‐Crafts reaction without gelation. It could be concluded that the polymer forming reaction was kinetically controlled by automatic and slow feeding of the hydrophobic B₃ monomer into the hydrophilic reaction mixture containing hydrophilic comonomer. As a result, hyperbranched structures were formed instead of crosslinked polymers even at full conversion (equifunctional monomer feed ratio). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3326–3336, 2009     

Hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s: Synthesis,characterization, end‐group modification,and optical properties

Novel AB₂‐type monomers such as 3,5‐bis(4‐methylolphenoxy)benzoic acid ( monomer 1 ), methyl 3,5‐bis(4‐methylolphenoxy) benzoate ( monomer 2 ), and 3,5‐bis(4‐methylolphenoxy)benzoyl chloride ( monomer 3 ) were synthesized. Solution polymerization and melt self‐polycondensation of these monomers yielded hydroxyl‐terminated hyperbranched aromatic poly(ether‐ester)s. The structure of these polymers was established using FTIR and ¹H NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 2.0 × 10³ to 1.49 × 10⁴ depending on the polymerization techniques and the experimental conditions used. Suitable model compounds that mimic exactly the dendritic, linear, and terminal units present in the hyperbranched polymer were synthesized for the calculation of degree of branching (DB) and the values ranged from 52 to 93%. The thermal stability of the polymers was evaluated by thermogravimetric analysis, which showed no virtual weight loss up to 200 °C. The inherent viscosities of the polymers in DMF ranged from 0.010 to 0.120 dL/g. End‐group modification of the hyperbranched polymer was carried out with phenyl isocyanate, 4‐(decyloxy)benzoic acid and methyl red dye. The end‐capping groups were found to change the thermal properties of the polymers such as T_g. The optical properties of hyperbranched polymer and the dye‐capped hyperbranched polymer were investigated using ultraviolet‐absorption and fluorescence spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5414–5430, 2008