Synthesis of silicon-containing vinyl ether monomers and oligomers and their photoinitiated polymerization

Silicon-containing divinyl ether monomers were synthesized by the addition reaction of glycidyl vinyl ether ( 1 ) with various silyl dichlorides using tetra-n-butylammonium bromide (TBAB) as a catalyst. The reaction of 1 with diphenyl dichlorosilane gave bis-[1-(chloromethyl)-2-(vinyloxy)-ethyl]diphenyl silane ( 3a ) in 89% yield. Polycondensations of 3a with terephthalic acid were also carried out using 1,8-Diazabicyclo[5.4.0]-7-undecene (DBU) to afford silicon-containing polyfunctional vinyl ether oligomers ( 5 ). A multifunctional Si-monomer with both vinyl ether and methacrylate groups ( 7 ) was prepared by the reaction of 3a with potassium methacrylate using TBAB as a phase transfer catalyst. Photoinitiated cationic polymerizations of these vinyl ether compounds proceeded rapidly using the sulfonium salt, bis-[4-(diphenyl-sulfonio)phenyl]sulfide-bis-hexafluorophoshate (DPSP), as the cationic photoinitiator in neat mixtures upon UV irradiation. Multifunctional monomer 7 with both vinyl ether and methacrylate groups showed “hybrid curing properties” using both DPSP and the radical photoinitiator, 2,4,6-trimethylbenzoyl diphenylphoshine oxide (TPO). © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3217–3225, 1997     

Some aspects of the polymerization of n-butyl vinyl ether by chromyl chloride

The rate of n-butyl vinyl ether polymerization by chromyl chloride is first order in [catalyst] and second order in [monomer]. Added H₂O (after a certain concentration) and HCl increase the rate, thiophene retards the rate, while pyridine inhibits the rate. DP is independent of [chromyl chloride] and increases with increasing [monomer] up to 1M, thereafter becoming independent of it. Both rate and DP increase over the range 10?32°C and decrease at higher temperatures.     

Alternating copolymerization of 2,3-dichloro-5,6-dicyano-p-benzoquinone with styrene and polymerization behavior with vinyloxy compounds

2,3-Dichloro-5,6-dicyano-p-benzoquinone (DDQ) was found to copolymerize alternatingly with styrene (St). DDQ–isobutyl vinyl ether and DDQ–2-chloroethyl vinyl ether systems gave homopolymers of vinyl ethers, while DDQ–phenyl vinyl ether and DDQ–vinyl acetate systems gave oligomers containing both monomer units. In the terpolymerization of DDQ, p-chloranil (pCA), and St, terpolymers obtained were found to have about 50 mole % of St units regardless of monomer feed ratio and DDQ was incorporated much more rapidly into the terpolymer than pCA. The difference in the reactivity of the acceptor monomers could be attributed to that in their electron-accepting character.     

Gel formation in cationic polymerization of divinyl ethers. III. Effect of oligooxyethylene chain versus oligomethylene chain as central spacer units

Cationic polymerizations of two series of divinyl ethers were carried out to clarify the effects of their central spacer chain structure on their crosslinking polymerization behavior. One series of the monomers involves divinyl ethers with an oligooxyethylene central spacer chain: diethylene glycol divinyl ether ( O‐3 ), triethylene glycol divinyl ether ( O‐4 ), tetraethylene glycol divinyl ether ( O‐5 ), pentaethylene glycol divinyl ether ( O‐6 ), and heptaethylene glycol divinyl ether ( O‐8 ) (see Scheme 1 ). The other series includes divinyl ethers with an oligomethylene central spacer chain: 1,4‐butanediol divinyl ether ( C‐4 ), 1,6‐hexanediol divinyl ether ( C‐6 ), and 1,8‐octanediol divinyl ether ( C‐8 ). Cationic polymerizations of these monomers were carried out with the hydrogen chloride/zinc chloride (HCl/ZnCl₂) initiating system in methylene chloride (CH₂Cl₂) at ?30 °C ([Monomer]₀ = 0.15 M; [HCl]₀ = 5.0 mM; [ZnCl₂]₀ = 0.5 mM). The polymerizations of the oligomethylene‐based divinyl ethers C‐6 and C‐8 caused gel formation at high monomer conversions (～90%), whereas C‐4 formed soluble polymers even at almost 100% monomer conversion. The oligooxyethylene‐based divinyl ethers O‐3 , O‐4 , O‐5 , and O‐6 underwent gel‐free polymerizations up to 100% monomer conversion and O‐8 did so at least up to ～80% conversion. The content of unreacted pendant vinyl groups of the obtained soluble polymers was measured by ¹H NMR spectroscopy. In the polymerizations of the oligomethylene‐based divinyl ethers ( C‐4 , C‐6 , and C‐8 ), the vinyl contents of the polymers decreased monotonously with increasing monomer conversion, and their number‐average molecular weights (M_n's) and polydispersity ratios (M_w/M_n's) increased considerably just before the gelation occurred. On the contrary, the vinyl contents of the polymers obtained from the oligooxyethylene‐based divinyl ethers ( O‐3 , O‐4 , O‐5 , O‐6 , and O‐8 ) decreased steeply even in the early stage of the polymerizations and almost all the pendant vinyl ether groups were consumed in the soluble polymers at the final stage of the polymerizations. The oligooxyethylene spacer units adjacent to the pendant unreacted vinyl ether groups may solvate intramolecularly with the carbocationic active center to accelerate frequent occurrence of intramolecular crosslinking reactions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3729–3738, 2004     

Synthesis and hydrogel formation of fluorine‐containing amphiphilic ABA triblock copolymers

Fluorine‐containing amphiphilic ABA triblock copolymers, poly(2‐hydroxyethyl vinyl ether)‐block‐poly[2‐(2,2,3,3,3‐pentafluoropropoxy)ethyl vinyl ether]‐block‐poly(2‐hydroxyethyl vinyl ether) [poly(HOVE‐b‐PFPOVE‐b‐HOVE)] (HFH), poly[2‐(2,2,3,3,3‐pentafluoropropoxy)ethyl vinyl ether]‐block‐poly(2‐hydroxyethyl vinyl ether)‐block‐poly[2‐(2,2,3,3,3‐pentafluoropropoxy)ethyl vinyl ether] [poly(PFPOVE‐b‐HOVE‐b‐PFPOVE)] (FHF), and poly(n‐butyl vinyl ether)‐block‐poly(2‐hydroxyethyl vinyl ether)‐block‐poly(n‐butyl vinyl ether) [poly(NBVE‐b‐HOVE‐b‐NBVE)] (LHL), were synthesized, and their behavior in water was investigated. The aforementioned polymers were prepared by sequential living cationic polymerization of 2‐acetoxyethyl vinyl ether (AcOVE) and PFPOVE or NBVE, followed by hydrolysis of acetyl groups in polyAcOVE. FHF and LHL formed a hydrogel in water, whereas HFH gave a homogeneous aqueous solution. In addition, the gel‐forming concentration of FHF was much lower than that of corresponding LHL. Surface‐tension measurements of the aqueous polymer solutions revealed that all the triblock copolymers synthesized formed micelles or aggregates above about 1.0 × 10^?4 mol/L. The surface tensions of HFH and FHF solutions above the critical micelle concentration were lower than those of LHL, indicating high surface activity of fluorine‐containing triblock copolymers. Small‐angle X‐ray scattering measurements revealed that HFH formed a core‐shell sperical micelle in 1 wt % aqueous solutions, whereas the other block copolymers caused more conplicated assembly in the solutions. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3751–3760, 2001     

Synthesis of phosphorus‐containing vinyl ether monomers and oligomers and their photoinitiated polymerization

Divinyl ether monomers containing phosphorous residues were synthesized by the addition reaction of glycidyl vinyl ether (GVE) with various phosphonic dichlorides or dichlorophosphates with quaternary onium salts as catalysts. The reaction of GVE with phenylphosphonic dichloride gave bis[1‐(chloromethyl)‐2‐(vinyloxy)ethyl]phenylphosphonate ( 1a ) in a 77% yield. The polycondensation of 1a with terephthalic acid was also carried out with 1,8‐diazabicyclo[5.4.0]undecene‐7 (DBU) as a condensing agent to afford the corresponding phosphorus‐containing polyester. A multifunctional monomer containing both vinyl ether groups and methacrylate groups was prepared by the reaction of 1a with methacrylic acid with DBU. The photoinitiated cationic polymerization of these vinyl ether compounds proceeded rapidly with bis[4‐(diphenylsulfonio)phenyl]sulfide‐bishexafluorophosphate as the cationic photoinitiator without a solvent upon ultraviolet irradiation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2031–2042, 2004     

Synthesis of monomers that expand on polymerization. Synthesis and polymerization of 3,9-dimethylene-1,5,7,11-tetraoxaspiro[5.5]undecane

A spiro ortho-carbonate containing two double bonds, 3,9-dimethylene-1,5,7,11-tetraoxaspiro[5.5]undecane (III) was prepared from 2-methylene-1,3-propanediol (VI). The structure of the monomer was indicated by its elementary analysis as well as its infrared and NMR spectra. When the crystalline monomer was polymerized with Lewis acids such as trifluoride etherate as catalysts, soluble polymer with a high molecular weight was obtained. The infrared and NMR spectra indicated that the polymer was an alternating copolymer of ether and carbonate having double bonds. When the usual monomers such as vinyl chloride and styrene polymerize, shrinkage occurs. However, this monomer underwent expansion on polymerization.     

Photo and thermal polymerizations sensitized by donor–acceptor interaction. II. Photopolymerization and electronic spectroscopy of the isobutyl vinyl ether–acrylonitrile system

Photopolymerization of acrylonitrile (AN), an acceptor monomer, was found to be accelerated in the presence of isobutyl vinyl ether (IBVE), a donor monomer. The propagation is completed by a radical mechanism as judged by copolymer compositions; in contrast to the N-vinylcarbazole–AN system studied previously. This photopolymerization system is entirely stable if kept in the dark. The comparison of the relation between R_p and [IBVE]/[AN] ratio in the monomer feed found for the spontaneous photopolymerization with that for radical polymerization initiated by azobisisobutylonitrile in the dark leads to the conclusion that the rate of photoinitiation is enhanced by the interaction between AN and IBVE, whereas the propagation step by a radical mechanism is retarded by increasing concentration of IBVE. The contact charge-transfer complex between IBVE and AN was confirmed by electronic spectroscopy of the polymerization system, which showed photosensitization by charge-transfer interaction. The spectroscopic study of other weak donor–weak acceptor systems is also discussed.     

Studies on propagating species in cationic polymerization of styrene derivatives by acetyl perchlorate or iodine. III. Effect of salt on cationic copolymerization of styrene derivatives with vinyl ethers by acetyl perchlorate

A common-ion salt, tetra-n-butylammonium perchlorate, was found to affect the monomer reactivity ratios in the cationic copolymerization by acetyl perchlorate of styrene with p-methylstyrene and of 2-chloroethyl vinyl ether with p-methylstyrene, but not those for the copolymerization of 2-chloroethyl vinyl ether with isobutyl vinyl ether. In the copolymerization of p-methylstyrene with styrene or with 2-chloroethyl vinyl ether, the addition of the common-ion salt in a polar solvent shifted the monomer reactivity ratios to those in a less polar solvent. The molecular weight distribution analysis of the copolymer suggested that the addition of the common-ion salt depresses the dissociation of propagating species. Therefore, it was concluded that a propagating species with a different degree of dissociation shows a different relative reactivity towards two monomers. The nature of propagating species was also discussed on the basis of the common-ion effect on the monomer reactivity ratios in various solvents.     

Radical copolymerization of 2‐trifluoromethylacrylic monomers. II. Kinetics,monomer reactivities,and penultimate effect in their copolymerization with norbornenes and vinyl ethers

Radical copolymerizations of electron‐deficient 2‐trifluoromethylacrylic (TFMA) monomers, such as 2‐trifluoromethylacrylic acid and t‐butyl 2‐trifluoromethylacrylate (TBTFMA), with electron‐rich norbornene derivatives and vinyl ethers with 2,2′‐azobisisobutyronitrile as the initiator were investigated in detail through the analysis of the kinetics in situ with ¹H NMR and through the determination of the monomer reactivity ratios. The norbornene derivatives used in this study included bicyclo[2.2.1]hept‐2‐ene (norbornene) and 5‐(2‐trifluoromethyl‐1,1,1‐trifluoro‐2‐hydroxylpropyl)‐2‐norbornene. The vinyl ether monomers were ethyl vinyl ether, t‐butyl vinyl ether, and 3,4‐dihydro‐2‐H‐pyran. Vinylene carbonate was found to copolymerize with TBTFMA. Although none of the monomers underwent radical homopolymerization under normal conditions, they copolymerized readily, producing a copolymer containing 60–70 mol % TFMA. The copolymerization of the TFMA monomer with norbornenes and vinyl ethers deviated from the terminal model and could be described by the penultimate model. The copolymers of TFMA reported in this article were evaluated as chemical amplification resist polymers for the emerging field of 157‐nm lithography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1478–1505, 2004     

Living cationic polymerization of vinyl ethers with a naphthyl group: Decisive effect of the substituted position on naphthalene ring

Living cationic polymerization of a vinyl ether with a naphthyl group [2‐(2‐naphthoxy)ethyl vinyl ether, βNpOVE] was achieved using base‐assisting initiating systems with a Lewis acid. The Et_1.5AlCl_1.5/1,4‐dioxane or ethyl acetate system induced the living cationic polymerization of βNpOVE in toluene at 0 °C. The living nature of this reaction was confirmed by a monomer addition experiment, followed by ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) analyses. In contrast, the polymerization of αNpOVE was not fully controlled; under similar conditions, it produced polymers with broad molecular weight distributions. The ¹H NMR and MALDI‐TOF‐MS spectra of the resultant poly(αNpOVE) revealed that the products had undesirable structures derived from Friedel–Crafts alkylation. The higher reactivity of αNpOVE in electrophilic substitution reactions, such as the Friedel–Crafts reaction, was attributable to the greater electron density of the naphthyl ring, which was calculated based on frontier orbital theory. The naphthyl groups significantly affected the properties of the resultant polymer. For example, the glass transition temperatures (T_g) of poly(NpOVE)s are higher by approximately 40 °C than that of poly(2‐phenoxyethyl vinyl ether). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Studies on propagating species in cationic polymerization of styrene derivatives by acetyl perchlorate or iodine. II. Salt effect on the relative reactivity in the cationic copolymerization of styrene derivatives with 2-chloroethyl vinyl ether initiated by iodine

To determine the effect of the dissociation of propagating species on the relative reactivity of monomers, 2-chloroethyl vinyl ether was copolymerized with p-methoxystyrene or with p-methylstyrene by using iodine in various solvents at 0°C. A common-ion salt (tetra-n-butylammonium iodide or tetra-n-butylammonium triiodide) was added to these copolymerization systems in a polar solvent to depress the dissociation of the propagating species. The addition of a common-ion salt increased the vinyl ether content in the copolymer. The more the dissociation of propagating species was depressed, the more the vinyl ether content in the copolymer increased. This effect of common-ion salt was in agreement with that of decreasing solvent polarity which yielded vinyl ether-rich copolymer as well. Therefore, the change of the monomer reactivity ratio by the solvent polarity, which used to be explained in terms of a selective solvation, must be reconsidered from the viewpoint of varying degrees of the dissociation of propagating species.     

Gel formation in cationic polymerization of divinyl ethers. II. 2,2-Bis{4-[(2-vinyloxy)ethoxy]phenyl}propane

Cationic polymerization of 2,2-bis{4-[(2-vinyloxy)ethoxy]phenyl}propane [CH₂CH O CH₂CH₂O C₆H₄ C(CH₃)₂ C₆H₄ OCH₂CH₂ O CHCH₂; 2], a divinyl ether with oxyethylene units adjacent to the polymerizable vinyl ether groups and a bulky central spacer, was investigated in CH₂Cl₂ at 0°C with the diphenyl phosphate [(C₆H₅O)₂P(O)OH]/zinc chloride (ZnCl₂) initiating system. The polymerization proceeded quantitatively and gave soluble polymers up to 85% monomer conversion. In the same fashion as the polymerization of 1,4-bis[2-vinyloxy(ethoxy)]benzene (CH₂CH O CH₂CH₂O C₆H₄ OCH₂CH₂ O CHCH₂; 1) that we already studied, the content of the unreacted pendant vinyl ether groups of the produced soluble polymers decreased with monomer conversion, and almost all the pendant vinyl ether groups were consumed in the soluble products prior to gelation. Alternatively, endo-type double bonds were gradually formed in the polymer main chains by chain transfer reactions and other side reactions as the polymerization proceeded. The polymerization behavior of isobutyl vinyl ether (3), a monofunctional vinyl ether, under the same conditions, showed that the endo-type olefins in the polymer backbones are of no polymerization ability with the growing active species involved in the present polymerization systems. These results indicate that the intermolecular crosslinking reactions occurred primarily by the pendant vinyl ether groups, and the final stage of crosslinking process leading to gelation also may occur by the small amount of the residual pendant vinyl ether groups (supposedly less than 2%). The formation of the soluble polymers that almost lack the unreacted pendant vinyl ether groups is most likely due to the frequent occurrence of intramolecular crosslinking reactions. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1931–1941, 1999     

Cationic cyclopolymerization of new divinyl ethers: The effect of ether and ester neighboring functional groups on their cyclopolymerization tendency

The cationic polymerization of two new divinyl ethers, 1‐(2‐vinyloxyethoxy)‐2‐[(2‐vinyloxyethoxy)carbonyl]benzene ( 2 ) and 1,2‐bis[(2‐vinyloxyethoxy)carbonyl]benzene ( 3 ), as well as 1,2‐bis(2‐vinyloxyethoxy)benzene ( 1 ), with BF₃OEt₂ in CH₂Cl₂ at 0 °C at low initial monomer concentrations ([M]₀ = 0.15 and 0.075 M) gave soluble polymers with relatively high molecular weights and broad molecular weight distributions (MWDs), whereas reactions with the HCl/ZnCl₂ initiating system yielded soluble polymers with relatively narrow MWDs (weight‐average molecular weight/number‐average molecular weight ? 1.6) under similar reaction conditions. An NMR structural analysis of the HCl/ZnCl₂‐mediated polymers from the divinyl ethers showed that poly( 1 ) had virtually no unreacted vinyl ether groups throughout the polymerization (monomer conversion = 28–98%), whereas poly( 2 ) and poly( 3 ) possessed some amount of unreacted vinyl ether groups in the initial stage of the polymerization; the content of the vinyl groups of poly( 2 ) was 18 mol % at a 15% monomer conversion, and the content of the vinyl groups of poly( 3 ) was 31 mol % at an 18% monomer conversion. Therefore, divinyl ether 1 underwent cyclopolymerization exclusively to give almost completely cyclized polymers [degree of cyclization (DC) ～ 100%], whereas divinyl ethers 2 and 3 exhibited a lower cyclopolymerization tendency [DC for poly( 2 ) = 82%; DC for poly( 3 ) = 69%]. The differences in the cyclopolymerization tendencies among the divinyl ethers can be explained by the differences in the solvation powers of the neighboring functional groups adjacent to the vinyl ether moiety with the active center: the ether oxygen of the ether neighboring group solvates intramolecularly with the active center to accelerate the intramolecular propagation, but such an interaction is less effective with the more electron‐deficient oxygen attached to the carbonyl group of the ester neighboring group. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 281–292, 2003     

Synthesis of new hybrid monomers and oligomers containing cationic and radical polymerizable vinyl groups and their photoinitiated polymerization

New hybrid vinyl monomers with both cationic- and radical-polymerizable vinyl groups were synthesized by the reaction of bis[1(chloromethyl)-2-(vinyloxy)ethyl]terephthalate ( 3 ) with unsaturated carboxylic acids using 1,8-diazabicyclo[5.4.0]-undecene-7 (DBU) as a base. The reaction of 3 with methacrylic acid 4a was carried out using DBU in DMSO at 70°C for 24 h to give an 86% yield of the hybrid vinyl monomer ( 5a ). Polycondensation of 3 with unsaturated dicarboxylic acids was also performed using DBU to give hybrid vinyl oligomers with radical polymerizable C (DOUBLE BOND) C groups (V_R) in the main chain and cationic polymerizable vinyl ether moieties (V_C) on the side chain. The photopolymerization of these hybrid vinyl compounds proceeded smoothly in bulk using either a cationic photoinitiator such as a sulfonium salt or a radical photoinitiator such as acyl phosphine oxide under UV irradiation. © 1996 John Wiley & Sons, Inc.     

Synthesis and photochemical reaction of novel p-alkylcalix[n]arene derivatives containing cationically polymerizable groups

New photoreactive p-methylcalix[6]arene (MCA) derivatives containing cationically polymerizable groups such as propargyl ether (calixarene 1), allyl ether (calixarene 2), and ethoxy vinyl ether (calixarene 3) groups were synthesized with 80, 74, and 84% yields by the substitution reaction of MCA with propargyl bromide, allyl bromide, and 2-chloroethyl vinyl ether (CEVE), respectively, in the presence of either potassium hydroxide or sodium hydride by using tetrabutylammonium bromide (TBAB) as a phase transfer catalyst (PTC). The p-tert-butylcalix[8]arene (BCA) derivative containing ethoxy vinyl ether groups (calixarene 4) was also synthesized in 83% yield by the substitution reaction of BCA with CEVE by using sodium hydride as a base and TBAB as a PTC. The MCA derivative containing 1-propenyl ether groups (calixarene 5) was synthesized in 80% yield by the isomerization of calixarene 2, which contained allyl ether groups, by using potassium tert-buthoxide as a catalyst. The photochemical reactions of carixarene 1, 3, 4, 5, and 6 were examined with certain photoacid generators in the film state. In this reaction system, calixarene 3 containing ethoxy vinyl ether groups showed the highest photochemical reactivity when bis-[4-(diphenylsulfonio)phenyl]sulfide bis(hexafluorophosphate) (DPSP) was used as the catalyst. On the other hand, calixarene 1 containing propargyl ether groups had the highest photochemical reactivity when 4-morpholino-2,5-dibuthoxybenzenediazonium hexafluorophosphate (MDBZ) was used as the catalyst. It was also found that the prepared carixarene derivatives containing cationically polymerizable groups such as propargyl, allyl, vinyl, and also 1-propenyl ethers have good thermal stability. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1805–1814, 1999     

Reactivities and NMR spectra of vinyl ethers

Copolymerizations of n-butyl vinyl ether (M₁) with other vinyl ethers were carried out in toluene at ?78°C with EtAlCl₂ catalyst and the monomer reactivity ratios were determined. It was found that the relative reactivity of alkyl vinyl ether log 1/r₁ is higher when the alkyl group is more electron-donating and the reactivity correlates linearly with the Taft σ^* of alkyl group in the monomer. The NMR spectra of vinyl ethers and of vinyl ether–trialkylaluminum complexes were investigated. Close correlations were found between the spectral characteristics and the relative reactivity of vinyl ether in the copolymerization. The degree of resonance contribution in alkyl vinyl ether was also discussed on the basis of NMR data.     

Living cationic polymerization of vinyl ethers with a urethane group

To study the possibility of living cationic polymerization of vinyl ethers with a urethane group, 4‐vinyloxybutyl n‐butylcarbamate ( 1 ) and 4‐vinyloxybutyl phenylcarbamate ( 2 ) were polymerized with the hydrogen chloride/zinc chloride initiating system in methylene chloride solvent at ?30 °C ([monomer]₀ = 0.30 M, [HCl]₀/[ZnCl₂]₀ = 5.0/2.0 mM). The polymerization of 1 was very slow and gave only low‐molecular‐weight polymers with a number‐average molecular weight (M_n) of about 2000 even at 100% monomer conversion. The structural analysis of the products showed occurrence of chain‐transfer reactions because of the urethane group of monomer 1 . In contrast, the polymerization of vinyl ether 2 proceeded much faster than 1 and led to high‐molecular‐weight polymers with narrow molecular weight distributions (MWDs ≤ ～1.2) in quantitative yield. The M_n's of the product polymers increased in direct proportion to monomer conversion and continued to increase linearly after sequential addition of a fresh monomer feed to the almost completely polymerized reaction mixture, whereas the MWDs of the polymers remained narrow. These results indicated the formation of living polymer from vinyl ether 2 . The difference of living nature between monomers 1 and 2 was attributable to the difference of the electron‐withdrawing power of the carbamate substituents, namely, n‐butyl for 1 versus phenyl for 2 , of the monomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2960–2972, 2004     

Alternating copolymerization of carbon monoxide and vinyl arenes using [N,N] bidentate palladium catalysts

The alternating copolymers of carbon monoxide (CO) and vinyl arene monomers, namely aromatic polyketones, are a family of attractive engineering plastic. In the catalytic synthesis of this kind of polymeric materials, [N,N] bidentate palladium catalysts represent the most successful catalytic systems. In this review, we introduce the present status of polyketone synthesis, with a focus on the aromatic polyketones made from vinyl arene and CO. We also address the palladium-catalyzed CO/vinyl arene alternating copolymerization mechanism. A variety of [N,N] bidentate palladium catalysts bearing 2,2′-bipyridine, 1,10-phenanthroline, α-diimine, and pyridine-imine ligands are surveyed for CO/vinyl arene copolymerization. The effects of vinyl arene monomer, counteranion, and solvent on copolymerization are also discussed. The copolymerization stereochemistry including chain end-control and enantiomorphic site control mechanisms is introduced. This review aims to promote the design of [N,N] bidentate palladium catalysts for CO/vinyl arene copolymerization for the development of high-performance aromatic polyketones.     

The Steric Course of the Cationic Polymerization of Vinyl and Related Monomers. The Counterion Effect

Polymerization with many triphenylmethyl salts was conducted for α-methylstyrene, isobutyl vinyl ether, t-butyl vinyl ether, and spiro[2,4]hepta-4,6-diene (SHD). The variation of polymer structure (the isotactic unit content for the first three monomer systems and the amount of the 1,4-addition structure for SHD) showed fairly simple correlations with the counteranion size. The results can be interpreted in terms of the tightness of the propagating ion pair within the framework of a theory of the cationic propagation which had been proposed. When the counteranion radius was greater than 3.5 Å, the counteranion exerts a parallel influence on the tightness of the growing ion pair without regard to the monomer structure. However, in the case of smaller counterions, the tightness appears to be determined by the relative sizes of counteranion and monomer. The penta-coordinated counteranions gave rise to the polymer structure which would arise from tighter ion pairs than expected from their sizes alone. The polymer structure was also affected by the initiator concentration in these cases. These results are attributed to peculiar characteristics of penta-coordinated anions.