An investigation of laminar radial flow between two parallel discs

Summary Experiments have been carried out to test recent theoretical predictions of the pressure distribution for laminar flow between parallel discs, including inertia effects. The experimental investigation covered the condition where the inertia effects were always completely dominant over the central region of the discs in contrast to other recent experimental work on the problem where the central injection diameter was considerably larger. The present experiments subject the theories to a stringent test, due to the dominance of the inertia effects, and it is found that the inertia effects predicted by the various theoretical analyses are significantly smaller than those shown by the experimental results. It is suggested that the theoretical approach requires further development before it will cover the conditions where the central injection diameter is small.Nomenclature r, y, cylindrical co-ordinates - u velocity in r direction - U _m mean velocity in r direction at radius r - density - coefficient of viscosity - Q volume flow per unit time - 2h gap between parallel discs - p static pressure - R r/h - P h ³ p/Q - R _e Q/h     

Uniqueness and the maximum principle for quasilinear elliptic equations with quadratic growth conditions

In this paper, we show that the maximum principle holds for quasilinear elliptic equations with quadratic growth under general structure conditions.Two typical particular cases of our results are the following. On one hand, we prove that the equation (1) {ie77-01} where {ie77-02} and {ie77-03} satisfies the maximum principle for solutions in H ¹()L(), i.e., that two solutions u ₁, u ₂H¹() L() of (1) such that u ₁u₂ on , satisfy u ₁u₂ in . This implies in particular the uniqueness of the solution of (1) in H ₀ ¹ ()L().On the other hand, we prove that the equation (2) {ie77-04} where fH^–1() and g(u)>0, g(0)=0, satisfies the maximum principle for solutions uH¹() such that g(u)¦Du|{²L¹(). Again this implies the uniqueness of the solution of (2) in the class uH ₀ ¹ () with g(u)¦Du|{²L¹().In both cases, the method of proof consists in making a certain change of function u=(v) in equation (1) or (2), and in proving that the transformed equation, which is of the form (3) {ie77-05}satisfies a certain structure condition, which using ((v₁ -v ₂)⁺)ⁿ for some n>0 as a test function, allows us to prove the maximum principle.     

On the sensitive dynamical system and the transition from the apparently deterministic process to the completely random process

The detailed analysis of the dynamical process of coin tossing is made. Through calculations, it is illustrated how and why the result is extremely sensitive to the initial conditions. It is also shown that, as the initial height of the mass center of the coin increases, the final configuration, i.e. head or tail, becomes more and more sensitive to the initial parameters (the initial velocity angular velocity, and the initial orientation), the coefficient of the air drag, and the energy absorption factor of the surface on which the coin bounces. If we keep the head upward initially but allow a small range for the change of some other initial parameters, the frequency that the final configuration is head, would be 1 if the initial height h of the mass center is sufficiently small, and would be clo to 1/2 if h is sufficiently large. An interesting question is how this frequency changes continuously from 1 to 1/2 as h increases. Detailed calculations show that such a transition is very similar to the transition from laminar to turbulent flows. A basic difference between the transition stage and the completely random stage is indicated: In the completely random stage, the deterministic process of the individual case is extremely sensitive to the initial conditions and the dynamical parameters, out the statistical properties of the ensemble are insensitive to the small changes of the initial conditions and the dynamical parameters. On the contrary, in the transition stage, both the deterministic process of the individual case and the statistical properties of the ensemble are sensitive to the initial conditions and the dynamical parameters. The mechanism for this feature of the transition stage is the existence of the long-train structure in the parameter space. The illuminations of this analysis on some other random phenomena are discussed.     

Flow in porous media III: Deformable media

Stokes flow in a deformable medium is considered in terms of an isotropic, linearly elastic solid matrix. The analysis is restricted to steady forms of the momentum equations and small deformation of the solid phase. Darcy's law can be used to determine the motion of the fluid phase; however, the determination of the Darcy's law permeability tensor represents part of the closure problem in which the position of the fluid-solid interface must be determined.Roman Letters A interfacial area of the- interface contained within the macroscopic system, m² - A interfacial area of the- interface contained within the averaging volume, m² - A _e area of entrances and exits for the-phase contained within the macroscopic system, m² - A ^* interfacial area of the- interface contained within a unit cell, m² - A _e ^* area of entrances and exits for the-phase contained within a unit cell, m² - E Young's modulus for the-phase, N/m² - e i unit base vectors (i = 1, 2, 3) - g gravity vector, m²/s - H height of elastic, porous bed, m - k unit base vector (=e ₃) - characteristic length scale for the-phase, m - L characteristic length scale for volume-averaged quantities, m - n unit normal vector pointing from the-phase toward the-phase (n = -n ) - p pressure in the-phase, N/m² - P p – g·r, N/m² - r ₀ radius of the averaging volume, m - r position vector, m - t time, s - T total stress tensor in the-phase, N/m² - T ⁰ hydrostatic stress tensor for the-phase, N/m² - u displacement vector for the-phase, m - V averaging volume, m₃ - V volume of the-phase contained within the averaging volume, m³ - v velocity vector for the-phase, m/s Greek Letters V /V, volume fraction of the-phase - mass density of the-phase, kg/m³ - shear coefficient of viscosity for the-phase, Nt/m² - first Lamé coefficient for the-phase, N/m² - second Lamé coefficient for the-phase, N/m² - bulk coefficient of viscosity for the-phase, Nt/m² - T –T ⁰ , a deviatoric stress tensor for the-phase, N/m²     

Indentation of the semi-infinite elastic solid by a concave rigid punch

A solution is obtained for the relationship between load, displacement and inner contact radius for an axisymmetric, spherically concave, rigid punch, indenting an elastic half-space. Analytic approximations are developed for the limiting cases in which the ratio of the inner and outer radii of the annular contact region is respectively small and close to unity. These approximations overlap well at intermediate values. The same method is applied to the conically concave punch and to a punch with a central hole. , , . , . . .     

On shock layer method for the hypersonic flow problems

Chernyi’s series method[1] is not proper for the case that(γ-l)/(γ+l)<<2/(γ+1)×M²sin²β (γ=c_p/c_v-adiabatic index number, M-Much number, β-shock incidence). In this paper, we only suppose that in the neighbour of the shock, there exists a shock layer in which the density of the gas is very big, but we do not remove the case that (γ-1)/(γ+1)<<2/(γ+1)M²sin²β.     

On the closure problem for Darcy's law

In a previous derivation of Darcy's law, the closure problem was presented in terms of an integro-differential equation for a second-order tensor. In this paper, we show that the closure problem can be transformed to a set of Stokes-like equations and we compare solutions of these equations with experimental data. The computational advantages of the transformed closure problem are considerable.Roman Letters A interfacial area of the- interface contained within the macroscopic system, m² - A _e area of entrances and exits for the-phase contained within the macroscopic system, m² - A interfacial area of the- interface contained within the averaging volume, m² - A _e area of entrances and exits for the-phase contained within the averaging volume, m² - B second-order tensor used to respresent the velocity deviation - b vector used to represent the pressure deviation, m^–1 - C second-order tensor related to the permeability tensor, m^–2 - D second-order tensor used to represent the velocity deviation, m² - d vector used to represent the pressure deviation, m - g gravity vector, m/s² - I unit tensor - K C ^–1,–D, Darcy's law permeability tensor, m² - L characteristic length scale for volume averaged quantities, m - characteristic length scale for the-phase, m - l _i i=1, 2, 3, lattice vectors, m - n unit normal vector pointing from the-phase toward the-phase - n _e outwardly directed unit normal vector at the entrances and exits of the-phase - p pressure in the-phase, N/m ² - p intrinsic phase average pressure, N/m² - p –p , spatial deviation of the pressure in the-phase, N/m² - r position vector locating points in the-phase, m - r ₀ radius of the averaging volume, m - t time, s - v velocity vector in the-phase, m/s - v intrinsic phase average velocity in the-phase, m/s - v phase average or Darcy velocity in the \-phase, m/s - v –v , spatial deviation of the velocity in the-phase m/s - V averaging volume, m³ - V volume of the-phase contained in the averaging volume, m³ Greek Letters V /V volume fraction of the-phase - mass density of the-phase, kg/m³ - viscosity of the-phase, Nt/m²     

On the Ellipticity of the Middle Surface of a Shell and its Application to the Asymptotic Analysis of ‘Membrane’ Shells

We consider a surface S = (), where ² is a bounded, connected, open set with a smooth boundary and : ³ is a smooth map; let () denote the components of the two-dimensional linearized strain tensor of S and let 0 with length 0 > 0. We assume the the norm ,|| ()||0, in the space V0() = { H¹() × H¹() × L²(); = 0 on 0 } is equivalent to the usual product norm on this space. We then establish that this assumption implies that the surface S is uniformly elliptic and that we necessarily have 0 = .     

On natural convection from a vertical plate with a prescribed surface heat flux in porous media

This paper presents a theoretical and numerical investigation of the natural convection boundary-layer along a vertical surface, which is embedded in a porous medium, when the surface heat flux varies as (1 +x ²)), where is a constant andx is the distance along the surface. It is shown that for > -1/2 the solution develops from a similarity solution which is valid for small values ofx to one which is valid for large values ofx. However, when -1/2 no similarity solutions exist for large values ofx and it is found that there are two cases to consider, namely < -1/2 and = -1/2. The wall temperature and the velocity at large distances along the plate are determined for a range of values of .Notation g Gravitational acceleration - k Thermal conductivity of the saturated porous medium - K Permeability of the porous medium - l Typical streamwise length - q _w Uniform heat flux on the wall - Ra Rayleigh number, =gK(q _w /k)l/(v) - T Temperature - Too Temperature far from the plate - u, v Components of seepage velocity in the x and y directions - x, y Cartesian coordinates - Thermal diffusivity of the fluid saturated porous medium - The coefficient of thermal expansion - An undetermined constant - Porosity of the porous medium - Similarity variable, =y(1+x ) ^/3/x ^1/3 - A preassigned constant - Kinematic viscosity - Nondimensional temperature, =(T – T )Ra^1/3 k/qw - Similarity variable, = =y(log_e x)^1/3/x ^2/3 - Similarity variable, =y/x ^2/3 - Stream function     

Effect of measuring volume length on two-component laser velocimeter measurements in a turbulent boundary layer

The effects of finite measuring volume length on laser velocimetry measurements of turbulent boundary layers were studied. Four different effective measuring volume lengths, ranging in spanwise extent from 7 to 44 viscous units, were used in a low Reynolds number (Re=1440) turbulent boundary layer with high data density. Reynolds shear stress profiles in the near-wall region show that u v strongly depends on the measuring volume length; at a given y-position, u v decreases with increasing measuring volume length. This dependence was attributed to simultaneous validations on the U and V channels of Doppler bursts coming from different particles within the measuring volume. Moments of the streamwise velocity showed a slight dependence on measuring volume length, indicating that spatial averaging effects well known for hot-films and hot-wires can occur in laser velocimetry measurements when the data density is high.List of symbols time-averaged quantity - u wall friction velocity, ( _w /)^1/2 - v kinematic viscosity - d _p pinhole diameter - l _eff spanwise extent of LDV measuring volume viewed by photomultiplier - l ⁺ non-dimensional length of measuring volume, l _eff u /v - y ⁺ non-dimensional coordinate in spanwise direction, y u /v - z ⁺ non-dimensional coordinate in spanwise direction, z u /v - U ⁺ non-dimensional mean velocity, /u - u instantaneous streamwise velocity fluctuation, U &#x2329;U - v instantaneous normal velocity fluctuation, V–V - u RMS streamwise velocity fluctuation, u ^21/2 - v RMS normal velocity fluctuation, v ^21/2 - Re Reynolds number based on momentum thickness, U 0/v - R _uv cross-correlation coefficient, u v/u v - R₁₂(0, 0, z) two point correlation between u and v with z-separation, <u(0, 0, 0) v (0, 0, z)>/<u(0, 0, 0) v (0, 0, 0)> - N rate at which bursts are validated by counter processor - T Taylor time microscale, u (dv/dt²)^–1/2     

Flow through a helically coiled annulus

In this paper the flow is studied of an incompressible viscous fluid through a helically coiled annulus, the torsion of its centre line taken into account. It has been shown that the torsion affects the secondary flow and contributes to the azimuthal component of velocity around the centre line. The symmetry of the secondary flow streamlines in the absence of torsion, is destroyed in its presence. Some stream lines penetrate from the upper half to the lower half, and if is further increased, a complete circulation around the centre line is obtained at low values of for all Reynolds numbers for which the analysis of this paper is valid, being the ratio of the torsion of the centre line to its curvature.Nomenclature A =constant - a outer radius of the annulus - b unit binormal vector to C - C helical centre line of the pipe - D rL - g 1000 - K Dean number=Re² - L 1+r sin - M (L ²+ ² r ²)^1/2 - n unit normal vector to C - P, P pressure and nondimensional pressure - p ₀, p pressures of O(1) and O() - Re Reynolds number=aW ₀/ - (r, , s), (r, , s) coordinates and nondimensional coordinates - nonorthogonal unit vectors along the coordinate directions - r ₀ radius of the projection of C - t unit tangent vector to C - V _r, V , V _s velocity components along the nonorthogonal directions - V_r, V, V _s nondimensional velocity components along - W ₀ average velocity in a straight annulus Greek symbols , curvature and nondimensional curvature of C - U, V, W lowest order terms for small in the velocity components along the orthogonal directions t - _r, , _s first approximations to V _r , V, V _s for small - =/=/ - kinematic viscosity - density of the fluid - , torsion and nondimensional torsion of C - , stream function and nondimensional stream function - nondimensional streamfunction for U, V - a inner radius of the annulus After this paper was accepted for publication, a paper entitled On the low-Reynolds number flow in a helical pipe, by C.Y. Wang, has appeared in J. Fluid. Mech., Vol 108, 1981, pp. 185–194. The results in Wangs paper are particular cases of this paper for =0, and are also contained in [9].     

Determination of permeability tensors for two-phase flow in homogeneous porous media: Theory

In this paper we continue previous studies of the closure problem for two-phase flow in homogeneous porous media, and we show how the closure problem can be transformed to a pair of Stokes-like boundary-value problems in terms of pressures that have units of length and velocities that have units of length squared. These are essentially geometrical boundary value problems that are used to calculate the four permeability tensors that appear in the volume averaged Stokes' equations. To determine the geometry associated with the closure problem, one needs to solve the physical problem; however, the closure problem can be solved using the same algorithm used to solve the physical problem, thus the entire procedure can be accomplished with a single numerical code.Nomenclature a a vector that maps V onto , m^-1. - A a tensor that maps V onto . - A area of the - interface contained within the macroscopic region, m². - A area of the -phase entrances and exits contained within the macroscopic region, m². - A area of the - interface contained within the averaging volume, m². - A area of the -phase entrances and exits contained within the averaging volume, m². - Bo Bond number (= (=(–)g²/). - Ca capillary number (= v/). - g gravitational acceleration, m/s². - H mean curvature, m^-1. - I unit tensor. - permeability tensor for the -phase, m². - viscous drag tensor that maps V onto V. - ^* dominant permeability tensor that maps onto v , m². - ^* coupling permeability tensor that maps onto v , m². - characteristic length scale for the -phase, m. - l characteristic length scale representing both and , m. - L characteristic length scale for volume averaged quantities, m. - n unit normal vector directed from the -phase toward the -phase. - n unit normal vector representing both n and n . - n unit normal vector representing both n and n . - P pressure in the -phase, N/m². - p superficial average pressure in the -phase, N/m². - p intrinsic average pressure in the -phase, N/m². - p –p , spatial deviation pressure for the -phase, N/m². - r ₀ radius of the averaging volume, m. - r position vector, m. - t time, s. - v fluid velocity in the -phase, m/s. - v superficial average velocity in the -phase, m/s. - v intrinsic average velocity in the -phase, m/s. - v –v , spatial deviation velocity in the -phase, m/s. - V volume of the -phase contained within the averaging volmue, m³. - averaging volume, m³. Greek Symbols V /, volume fraction of the -phase. - viscosity of the -phase, Ns/m². - density of the -phase, kg/m³. - surface tension, N/m. - (v +v ^T ), viscous stress tensor for the -phase, N/m².     

On the Temperature of a Rarefied Gas in Non‐Equilibrium

This paper addresses the problem of the proper definition of temperature of a gas in nonequilibrium. It shows that the mean kinetic energy of the atoms of a rarefied gas is not a good measure for thethermodynamic temperature, because in general it jumps at a wall, and because it is nonmonotone in a onedimensional process of stationary heat conduction. The jump of the kinetic temperature is calculated and found to be about 5K in a rarefied gas. The basis for the calculations is provided by the arguments of extended thermodynamics of 14 moments. An essential tool is the minimax principle of entropy production recently postulated by Struchtrup Weiss [1], because it furnishes one important boundary condition.Sommario. Il lavoro riguarda la corretta definizione della temperatura di un gas in condizioni di nonequilibrio. Si mostra come lenergia cinetica media degli atomi di un gas rarefatto non sia una buona misura della temperatura termodinamica poiché in generale, essa risulta discontinua su una parete e nonmonotona in un processo unidimensionale di conduzione stazionaria del calore. Viene calcolato il salto della temperatura cinetica che risulta pari a circa 5K in un gas rarefatto. La base per il calcolo è fornita dal contesto della termodinamica estesa di 14 momenti. Uno strumento essenziale è rappresentato dal principio di minimax di produzione di entropia recentemente postulato da Struchtrup and Weiss [1], che fornisce unimportante condizione alcontorno.     

Approximate solutions for drag coefficient of bubbles moving in shear-thinning elastic fluids

The drag coefficient for bubbles with mobile or immobile interface rising in shear-thinning elastic fluids described by an Ellis or a Carreau model is discussed. Approximate solutions based on linearization of the equations of motion are presented for the highly elastic region of flow. These solutions are in reasonably good agreement with the theoretical predictions based on variational principles and with published experimental data. C _D Drag coefficient - E ^* Differential operator [E ^{* 2} = ²/² + (sin/ ²)/(1/sin /)] - El Ellis number - F _D Drag force - K Consistency index in the power-law model for non-Newtonian fluid - n Flow behaviour index in the Carreau and power-law models - P Dimensionless pressure [=(p – p ₀)/₀ (U /R)] - p Pressure - R Bubble radius - Re ₀ Reynolds number [= 2R U /₀] - Re Reynolds number defined for the power-law fluid [= (2R) ⁿ U ^2–n /K] - r Spherical coordinate - t Time - U Terminal velocity of a bubble - u Velocity - Wi Weissenberg number - Ellis model parameter - Rate of deformation - Apparent viscosity - ₀ Zero shear rate viscosity - Infinite shear rate viscosity - Spherical coordinate - Parameter in the Carreau model - ^* Dimensionless time [=/(U /R)] - Dimensionless length [=r/R] - Second invariant of rate of deformation tensors - ^* Dimensionless second invariant of rate of deformation tensors [=/(U /R)²] - Second invariant of stress tensors - ^* Dimensionless second invariant of second invariant of stress tensor [= / ₀ ² (U /R)²] - Fluid density - Shear stress - ^* Dimensionless shear stress [=/ ₀ (U /R)] - _1/2 Ellis model parameter - ₁ ^2/* Dimensionless Ellis model parameter [= _1/2/ ₀(U /R)] - Stream function - ^* Dimensionless stream function [=/U R ²]     

Qualitative behavior of dissipative wave equations on bounded domains

The qualitative behavior of solutions of the mixed problem u_tt = u-a(x)u_t in IR x , u=0 on IR x , is studied in the case when a>0 and IRⁿ is bounded. Roughly speaking, if aa_min>0, then solutions decay at least as fast as exp t( –1/2a_min), with the possible exception of a finite dimensional set of smooth solutions whose existence is associated with a phenomenon of overdamping. If a_max is sufficiently small, depending on , then no overdamping occurs.Partially supported by NSF grant NSF GP 34260.This work was partially supported by the National Science Foundation under Grant No. GP 34260     

Pressure measuring techniques in I.C.E.

Summary A revue of the possible errors affecting pressure measurements in internal combustion engines is presented. A new instrument based on the principle of the Balanced Pressure Indicator and signal multiplexing was developped. Its characteristics used both to obtain an accurate mean pressure diagram and to calibrate pressure transducers in working engines. The overall ability of obtaining meaningful pressure data was shown, even if it is clear that pressure measurements are more an art than a mere technique, given the complexity of the problems involved.

---

Sommario L'articolo presenta un'analisi dei possibili errori che possono distorcere la misurazione delle pressioni nella camera di combustione dei motori a combustione interna. Un nuovo strumento, basato sul principio dell'indicatore di pressione a bilanciamento di pressioni e del multiplex a modi di impulsi, è qui anche presentato ed utilizzato sia per ottenere un diagramma medio di pressioni di notevole accuratezza, che per calibrare trasduttori di pressione in condizioni di lavoro, cioè mentre il motore è in funzione. Ne risulta che è possibile ottenere diagrammi di pressione veramente rappresentativi delle condizioni di lavoro del motore, anche se è chiaro che, data la complessità dei problemi relativi a detta misurazione, misurare la pressione nei motori è più un'arte che pura tecnica.

     

The value of the critical exponent for reaction-diffusion equations in cones

Let D R ^N be a cone with vertex at the origin i.e., D = (0, )x where S ^N–1 and x D if and only if x = (r, ) with r=¦x¦, . We consider the initial boundary value problem: u _t = u+u ^p in D×(0, T), u=0 on Dx(0, T) with u(x, 0)=u ₀(x) 0. Let ₁ denote the smallest Dirichlet eigenvalue for the Laplace-Beltrami operator on and let ₊ denote the positive root of (+N–2) = ₁. Let p ^* = 1 + 2/(N + ₊). If 1 < p < p ^*, no positive global solution exists. If p>p ^*, positive global solutions do exist. Extensions are given to the same problem for u _t=+¦x¦ u ^p .This research was supported in part by the Air Force Office of Scientific Research under Grant # AFOSR 88-0031 and in part by NSF Grant DMS-8 822 788. The United States Government is authorized to reproduce and distribute reprints for governmental purposes not withstanding any copyright notation therein.     

Shear softening and thixotropic properties of wheat flour doughs in dynamic testing at high shear strain

Shear softening and thixotropic properties of wheat flour doughs are demonstrated in dynamic testing with a constant stress rheometer. This behaviour appears beyond the strictly linear domain (strain amplitude ₀ 0.2%),G,G and |^*| decreasing with ₀, the strain response to a sine stress wave yet retaining a sinusoidal shape. It is also shown thatG recovers progressively in function of rest time. In this domain, as well as in the strictly linear domain, the Cox-Merz rule did not apply but() and | ^*())| may be superimposed by using a shift factor, its value decreasing in the former domain when ₀ increases. Beyond a strain amplitude of about 10–20%, the strain response is progressively distorted and the shear softening effects become irreversible following rest.     

The mirror relations and nonlinear viscoelasticity of polymer melts

An attempt is made to incorporate into a quasilinear viscoelastic constitutive equation of the Boltzmann superposition type the two mirror relations of Gleissle, as well as his relation between the steady-state first normal-stress difference and the shear viscosity curve. It is shown that the three relations can hold separately within this constitutive model, but not simultaneously, because they require a different nonlinear strain measure, namelyS ₁₂ () = – a ( – 1) (a = 0 for 1,a = 1 for 1) for the mirroring of the viscosities,S ₁₂ () = – a (–k ²/) (a = 0 for k, a = 1 for k) for the mirroring of the first normal-stress coefficients, and for the third relation. Here denotes the shear strain and erf the error function. Experimental data on melts of a low-density polyethylene, a high-density polyethylene and a polypropylene show that the mirror relations are passable approximations, but that the third relation meets reality surprisingly close if the right value ofk is used.     

Combined natural and forced convection in a laminar wall jet along a vertical plate with uniform surface heat flux

The steady state flow and heat transfer characteristics of the combined natural and forced convection in a two dimensional, laminar, incompressible wall jet over a vertical wall are obtained for constant wall heat flux boundary condition. The velocity and temperature distribution are assumed to be power series, where the zeroth term corresponds to that for a plane wall jet in the absence of buoyancy effects. Numerical results for the momentum and thermal series functions are presented for a Prandtl number of 0.73. Wall values of the momentum and thermal series functions are presented for Prandtl numbers ranging from 0.01 to 1000.Nomenclature Gr* modified Grashof number - k thermal conductivity - Nu Nusselt number - Pr Prandtl number - q _w heat flux at the wall - Re Reynolds number - T temperature - u velocity component in x-direction - v velocity component in y-direction - x co-ordinate along the plane wall - y co-ordinate normal to the wall - () gamma function - non-dimensional co-ordinate defined in (6) - non-dimensional temperature - dynamic viscosity - kinematic viscosity - non-dimensional co-ordinate defined in (6) - density - w values at the wall - values at large distances away from the wall