Synthesis of new [8Fe-7S] clusters: a topological link between the core structures of P-cluster, FeMo-co, and FeFe-co of nitrogenases

A coordinatively unsaturated dinuclear iron(II) complex of bulky thiolates, [(TipS)Fe(micro-SDmp)]2 (1; Tip = 2,4,6-(i)Pr(3)C(6)H(2), Dmp = 2,6-(mesityl)(2)C(6)H(3)), was synthesized from stepwise reactions of Fe{N(SiMe(3))2}2 with 1 equiv of HSDmp and then with 1 equiv of HSTip. Complex 1 was found to react with elemental sulfur (S8) in toluene to generate a new class of [8Fe-7S] cluster, [(DmpS)Fe(4)S(3)]2(micro-SDmp)2(micro-STip)(micro(6)-S) (2). The cluster 2 was also produced from one-pot reactions of Fe{N(SiMe(3))2}2 + HSDmp + HSTip + S8 (8:6:10:7/8) and Fe3{N(SiMe(3))2}2(micro-STip)4 + HSDmp + S8 (8/3:16/3:7/8), where another [8Fe-7S] cluster, [(TipS)Fe(4)S(3)]2(micro-SDmp)2{micro-N(SiMe(3))2}(micro(6)-S) (3), was also found as a minor byproduct. In either of the clusters, two Fe(4)S(3) incomplete cubane units are connected by three anionic ligands, namely three thiolate S atoms for 2 or two thiolate S atoms and one amide N atom for 3, and one hexa-coordinate S atom resides at the center of the [8Fe-7S] core. They have a common Fe(II)(5)Fe(III)3 oxidation states, and an S = 1/2 ground spin state was indicated by rhombic EPR signals at 10 K with g = 2.19, 2.07, and 1.96 for 2 and g = 2.13, 2.06, and 1.93 for 3. The structural relevance of clusters 2 and 3 to P-cluster, FeMo-co, and FeFe-co of nitrogenases is discussed.     

Carbon monoxide induced decomposition of the active site [Ni-4Fe-5S] cluster of CO dehydrogenase

During the past two years, crystal structures of Cu- and Mo-containing carbon monoxide dehydrogenases (CODHs) and Ni- and Fe-containing CODHs have been reported. The active site of CODHs from anaerobic bacteria (cluster C) is composed of Ni, Fe, and S for which crystallographic studies of the enzymes from Carboxydothermus hydrogenoformans, Rhodospirillum rubrum, and Moorella thermoaceticarevealed structural similarities in the overall protein fold but showed substantial differences in the essential Ni coordination environment. The [Ni-4Fe-5S] cluster C in the fully catalytically competent dithionite-reduced CODH II from C. hydrogenoformans (CODHII(Ch)) at 1.6 A resolution contains a characteristic mu(2)-sulfido ligand between Ni and Fe1, resulting in a square-planar ligand arrangement with four S-ligands at the Ni ion. In contrast, the [Ni-4Fe-4S] clusters C in CO-treated CODH from R. rubrum resolved at 2.8 A and in CO-treated acetyl-CoA synthase/CODH complex from M. thermoacetica at 2.2 and 1.9 A resolution, respectively, do not contain the mu(2)-sulfido ligand between Ni and Fe1 and display dissimilar geometries at the Ni ion. The [Ni-4Fe-4S] cluster is composed of a cubane [Ni-3Fe-4S] cluster linked to a mononuclear Fe site. The described coordination geometries of the Ni ion in the [Ni-4Fe-4S] cluster of R. rubrum and M. thermoacetica deviate from the square-planar ligand geometry in the [Ni-4Fe-5S] cluster C of CODHII(Ch). In addition, the latter was converted into a [Ni-4Fe-4S] cluster under specific conditions. The objective of this study was to elucidate the relationship between the structure of cluster C in CODHII(Ch) and the functionality of the protein. We have determined the CO oxidation activity of CODHII(Ch) under different conditions of crystallization, prepared crystals of the enzyme in the presence of dithiothreitol or dithionite as reducing agents under an atmosphere of N(2) or CO, and solved the corresponding structures at 1.1 to 1.6 A resolutions. Fully active CODHII(Ch) obtained after incubation of the enzyme with dithionite under N(2) revealed the [Ni-4Fe-5S] cluster. Short treatment of the enzyme with CO in the presence of dithiothreitol resulted in a catalytically competent CODHII(Ch) with a CO-reduced [Ni-4Fe-5S] cluster, but a prolonged treatment with CO caused the loss of CO-oxidizing activity and revealed a [Ni-4Fe-4S] cluster, which did not contain a mu(2)-S. These data suggest that the [Ni-4Fe-4S] cluster of CODHII(Ch) is an inactivated decomposition product originating from the [Ni-4Fe-5S] cluster.     

Chemical activity of iron in [2Fe-2S]-protein centers and FeS2(100) surfaces

Iron atoms bonded to sulfur play an important role in proteins, heterogeneous catalysts, and gas sensors. First-principles density functional calculations were used to investigate the structure and chemical activity of a unique [2Fe-2S] center in the split-Soret cytochrome c (Ssc) from Desulfovibrio desulfuricans. In agreement with a previously proposed structural model [Abreu et al., J. Biol. Inorg. Chem. 2003, 8, 360], it is found that the [2Fe-2S] cluster is located in a surface pocket of the Ssc and bonded to only three cysteines. The [2Fe-2S] center in the Ssc is nonplanar and somewhat distorted with respect to canonical [2Fe-2S] centers seen in proteins where the iron-sulfur unit is bonded to four cysteines. In the Ssc, the lack of one Fe-cysteine bond is partially compensated by the separation between the cysteines that minimizes electrostatic repulsion among these ligands. The unique structure of the [2Fe-2S] center in the Ssc makes the center more chemically active than canonical [2Fe-2S] centers in proteins, (RS)(4)[2Fe-2S] inorganic complexes, and an FeS2(100) surface. A [2Fe-2S] center in the Ssc interacts efficiently with electron acceptors (O2, NO, CO) and poorly with a Lewis base such as H2O. The interaction with molecular oxygen is so strong that eventually oxidatively destroys the [2Fe-2S] unit. The bonding energy of the ligands to the [2Fe-2S] centers and FeS2(100) surface increases following the sequence: H2O < CO < NO < O2. The higher the electron affinity of the ligand, the larger its bonding energy. A relatively large positive charge on the Fe cations in FeS2(100) makes this sulfide surface less reactive toward O2, CO, and NO than the [2Fe-2S] centers in proteins and inorganic complexes.     

Electronic structure and intrinsic redox properties of [2Fe-2S]+ clusters with tri- and tetracoordinate iron sites

Using potentially bidentate ligands (-SC2H4NH2), we produced [2Fe-2S]+ species of different coordination geometries by fission of [4Fe-4S]2+ complexes. Even though the ligands are monodentate in the cubane complexes, both mono- and bidentate complexes were observed in the [2Fe] fission products through self-assembly because of the high reactivity of the tricoordinate iron sites. The electronic structure of the [2Fe] species was probed using photoelectron spectroscopy and density functional calculations. It was found that tetracoordination significantly decreases the electron binding energies of the [2Fe] complexes, thus increasing the reducing capability of the [2Fe-2S]+ clusters.     

Probing the electronic structure of [2Fe-2S] clusters with three coordinate iron sites by use of photoelectron spectroscopy

Five series of [2Fe-2S] complexes, [Fe(2)S(2)Cl(2)(-)(x)(CN)(x)](-), [Fe(2)S(2)(SEt)(2)(-)(x)Cl(x)](-), [Fe(2)S(2)(SEt)(2)(-)(x)(CN)(x)](-), [Fe(2)S(2)Cl(2)(-)(x)(OAc)(x)](-) (OAc = acetate), and [Fe(2)S(2)(SEt)(2)(-)(x)(OPr)(x)](-) (OPr = propionate) (x = 0-2), were produced by collision-induced dissociation of the corresponding [4Fe-4S] complexes, and their electronic structures were studied by photoelectron spectroscopy. All the [2Fe-2S] complexes contain a [Fe(2)S(2)](+) core similar to that in reduced [2Fe] ferredoxins but with different coordination geometries. For the first three series, which only involve tricoordinated Fe sites, a linear relationship between the measured binding energies and the substitution number (x) was observed, revealing the independent ligand contributions to the total electron binding energies. The effect of the ligand increases in the order SEt --> Cl --> CN, conforming to their electron-withdrawing ability in the same order. The carboxylate ligands in the [Fe(2)S(2)Cl(2)(-)(x)(OAc)(x)](-) and [Fe(2)S(2)(SEt)(2)(-)(x)(OPr)(x)](-) complexes were observed to act as bidentate ligands, giving rise to tetracoordinated iron sites. This is different from their monodentate coordination behavior in the [4Fe-4S] cubane complexes, reflecting the high reactivity of the unsatisfied three-coordinate iron site in the [2Fe-2S] complexes. The [2Fe-2S] complexes with tetracoordinated iron sites exhibit lower electron binding energies, that is, higher reductive activity than the all tricoordinate planar clusters. The electronic structures of all the [2Fe-2S] complexes were shown to conform to the "inverted energy level scheme".     

铁铂硫原子簇化合物的合成与结构研究 V: [MoFe3S4]类立方烷簇合物的转化反应和[Et4N]3[Mo2Fe6S8(SC6H4CH3-m)3Cl6]的晶体结构

具[MoFe2S4]类立方烷结构单元的双类立方烷化合物[Et4N]4[Mo2Fe7S8(SR)12](1a,R=Ph; 1b, R=tolyl-m)或单类立方烷化合物[MoFe3S4(dteR2)5](2a, R=Me; 2b, R=Et)与酰氯在乙腈中反应, 分别得到不含Fe桥的双类立方烷化合物(Et4N)3[Mo2Fe6S8(SR)3Cl6](3a, R=Ph; 3b, R=toly-m)与[MoFe3S4]骨架支解后的Fe(dteR2)2Cl(4a, R=Me; 4b, R=Et)。说明在相同反应条件下, [MoFe3S4]单元在1中比在2中稳定, 本文首次将1型与3型结构通过一步化学反应连系起来。3型化合物的产生得到X射线衍射测定及^1H NMR谱的证实。本文报道3b的单晶结构及3的^!H NMR数据, 3b属六方晶系, P63/m, a=1.6827(3), c=1.5951(16)nm; V=3.91158nm^3; Dc=1.491g/cm^3;Z=2; F(000)=1780; 偏离因子R=0.048, 化合物2与酰氯反应产生4, 由红外及紫外可见光谱证实。     

过渡金属硫簇的几种簇骼转化反应

报道了过渡金属硫簇化合物的几种簇骼转化反应，即三核链状簇的转化；双核配合物的组合；Ｍｏ２Ｆｅ７Ｓ８和Ｍｏ２Ｆｅ６Ｓ８两种双立方烷的关联；Ｆｅ４Ｓ４立方烷簇向篮状簇的转化；簇降解以及簇骼原子置换反应等。探讨了配体及氧化还原条件对簇骼转化反应的影响。     

Probing the intrinsic electronic structure of the cubane [4Fe-4S] cluster: nature's favorite cluster for electron transfer and storage

The cubane [4Fe-4S] is the most common multinuclear metal center in nature for electron transfer and storage. Using electrospray, we produced a series of gaseous doubly charged cubane-type complexes, [Fe4S4L4]2- (L = -SC2H5, -SH, -Cl, -Br, -I) and the Se-analogues [Fe4Se4L4]2- (L = -SC2H5, -Cl), and probed their electronic structures with photoelectron spectroscopy and density functional calculations. The photoelectron spectral features are similar among all the seven species investigated, revealing a weak threshold feature due to the minority spins on the Fe centers and confirming the low-spin two-layer model for the [4Fe-4S](2+) core and its "inverted level scheme". The measured adiabatic detachment energies, which are sensitive to the terminal ligand substitution, provide the intrinsic oxidation potentials of the [Fe4S4L4]2- complexes. The calculations revealed a simple correlation between the electron donor property of the terminal thiolate as well as the bridging sulfide with the variation of the intrinsic redox potentials. Our data provide intrinsic electronic structure information of the [4Fe-4S] cluster and the molecular basis for understanding the protein and solvent effects on the redox properties of the [4Fe-4S] active sites.     

Reactions of synthetic [2Fe-2S] and [4Fe-4S] clusters with nitric oxide and nitrosothiols

The interaction of nitric oxide (NO) with iron-sulfur cluster proteins results in degradation and breakdown of the cluster to generate dinitrosyl iron complexes (DNICs). In some cases the formation of DNICs from such cluster systems can lead to activation of a regulatory pathway or the loss of enzyme activity. In order to understand the basic chemistry underlying these processes, we have investigated the reactions of NO with synthetic [2Fe-2S] and [4Fe-4S] clusters. Reaction of excess NO(g) with solutions of [Fe2S2(SR)4](2-) (R = Ph, p-tolyl (4-MeC6H4), or 1/2 (CH2)2-o-C6H4) cleanly affords the respective DNIC, [Fe(NO)2(SR)2](-), with concomitant reductive elimination of the bridging sulfide ligands as elemental sulfur. The structure of (Et4N)[Fe(NO)2(S-p-tolyl)2] was verified by X-ray crystallography. Reactions of the [4Fe-4S] clusters, [Fe4S4(SR)4](2-) (R = Ph, CH2Ph, (t)Bu, or 1/2 (CH2)-m-C6H4) proceed in the absence of added thiolate to yield Roussin's black salt, [Fe4S3(NO)7](-). In contrast, (Et4N)2[Fe4S4(SPh)4] reacts with NO(g) in the presence of 4 equiv of (Et4N)(SPh) to yield the expected DNIC. For all reactions, we could reproduce the chemistry effected by NO(g) with the use of trityl-S-nitrosothiol (Ph3CSNO) as the nitric oxide source. These results demonstrate possible pathways for the reaction of iron-sulfur clusters with nitric oxide in biological systems and highlight the importance of thiolate-to-iron ratios in stabilizing DNICs.     

Sequential oxidation of the cubane [4Fe--4S] cluster from [4Fe--4S](-) to [4Fe--4S](3+) in Fe(4)S(4)L(n)(-) complexes

Gaseous Fe(4)S(n)(-) (n = 4-6) clusters and synthetic analogue complexes, Fe(4)S(4)L(n)(-) (L = Cl, Br, I; n = 1-4), were produced by laser vaporization of a solid Fe/S target and electrospray from solution samples, respectively, and their electronic structures were probed by photoelectron spectroscopy. Low binding energy features derived from minority-spin Fe 3d electrons were clearly distinguished from S-derived bands. We showed that the electronic structure of the simplest Fe(4)S(4)(-) cubane cluster can be described by the two-layer spin-coupling model previously developed for the [4Fe] cubane analogues. The photoelectron data revealed that each extra S atom in Fe(4)S(5)(-) and Fe(4)S(6)(-) removes two minority-spin Fe 3d electrons from the [4Fe--4S] cubane core and each halogen ligand removes one Fe 3d electron from the cubane core in the Fe(4)S(4)L(n)(-) complexes, clearly revealing a behavior of sequential oxidation of the cubane over five formal oxidation states: [4Fe--4S](-) --> [4Fe--4S](0) --> [4Fe--4S](+) --> [4Fe-4S](2+) --> [4Fe-4S](3+). The current work shows the electron-storage capability of the [4Fe--4S] cubane, contributes to the understanding of its electronic structure, and further demonstrates the robustness of the cubane as a structural unit and electron-transfer center.     

A [4Fe-4S] cluster dimer bridged by bis(2,2':6',2'-terpyridine-4'-thiolato)iron(II)

The use of 2,2':6',2'-terpyridine-4'-thiol (tpySH) was explored as a bridging ligand for the formation of stable assemblies containing both [4Fe-4S] clusters and single metal ions. Reaction of tpySH (2 equiv) with (NH4)2Fe(SO4)(2).6H2O generated the homoleptic complex [Fe(tpySH)2](2+), which was isolated as its PF6(-) salt. The compound could be fully deprotonated to yield neutral [Fe(tpyS)2], and the absorption spectrum is highly dependent on the protonation state. Reaction of [Fe(tpySH)2](PF6)2 with the new 3:1 site-differentiated cluster (n-Bu4N)2[Fe4S4(TriS)(SEt)] yielded the first metal-bridged [4Fe-4S] cluster dimer, (n-Bu4N)2[{Fe4S4(TriS)(mu-Stpy)}2Fe]. Electrochemical studies indicate that the [4Fe-4S] clusters in the dimer act as independent redox units, while UV-vis spectroscopy provides strong evidence for a thioquinonoid electron distribution in the bridging tpyS(-) ligand. TpySH thus acts as a directional bridging ligand between [4Fe-4S] clusters and single metal ions, thereby opening the way to the synthesis of larger, more complex assemblies.     

The electronic structure of the H-cluster in the [FeFe]-hydrogenase from Desulfovibrio desulfuricans: a Q-band 57Fe-ENDOR and HYSCORE study

The active site of the (57)Fe-enriched [FeFe]-hydrogenase (i.e., the "H-cluster") from Desulfovibrio desulfuricans has been examined using advanced pulse EPR methods at X- and Q-band frequencies. For both the active oxidized state (H(ox)) and the CO inhibited form (H(ox)-CO) all six (57)Fe hyperfine couplings were detected. The analysis shows that the apparent spin density extends over the whole H-cluster. The investigations revealed different hyperfine couplings of all six (57)Fe nuclei in the H-cluster of the H(ox)-CO state. Four large 57Fe hyperfine couplings in the range 20-40 MHz were found (using pulse ENDOR and TRIPLE methods) and were assigned to the [4Fe-4S](H) (cubane) subcluster. Two weak (57)Fe hyperfine couplings below 5 MHz were identified using Q-band HYSCORE spectroscopy and were assigned to the [2Fe](H) subcluster. For the H(ox) state only two different 57Fe hyperfine couplings in the range 10-13 MHz were detected using pulse ENDOR. An (57)Fe line broadening analysis of the X-band CW EPR spectrum indicated, however, that all six (57)Fe nuclei in the H-cluster are contributing to the hyperfine pattern. It is concluded that in both states the binuclear subcluster [2Fe](H) assumes a [Fe(I)Fe(II)] redox configuration where the paramagnetic Fe(I) atom is attached to the [4Fe-4S](H) subcluster. The (57)Fe hyperfine interactions of the formally diamagnetic [4Fe-4S](H) are due to an exchange interaction between the two subclusters as has been discussed earlier by Popescu and Münck [Popescu, C.V.; Münck, E., J. Am. Chem. Soc. 1999, 121, 7877-7884]. This exchange coupling is strongly enhanced by binding of the extrinsic CO ligand. Binding of the dihydrogen substrate may induce a similar effect, and it is therefore proposed that the observed modulation of the electronic structure by the changing ligand surrounding plays an important role in the catalytic mechanism of [FeFe]-hydrogenase.     

A conformational role for NifW in the maturation of molybdenum nitrogenase P-cluster

Reduction of dinitrogen by molybdenum nitrogenase relies on complex metalloclusters: the [8Fe:7S] P-cluster and the [7Fe:9S:Mo:C:homocitrate] FeMo-cofactor. Although both clusters bear topological similarities and require the reductive fusion of [4Fe:4S] sub-clusters to achieve their respective assemblies, P-clusters are assembled directly on the NifD₂K₂ polypeptide prior to the insertion of FeMo-co, which is fully assembled separately from NifD₂K₂. P-cluster maturation involves the iron protein NifH₂ as well as several accessory proteins, whose role has not been elucidated. In the present work, two NifD₂K₂ species bearing immature P-clusters were isolated from an Azotobacter vinelandii strain in which the genes encoding NifH and the accessory protein NifZ were deleted, and characterized by X-ray absorption spectroscopy and EPR. These analyses showed that both NifD₂K₂ complexes harbor clusters that are electronically and structurally similar, with each NifDK unit containing two [4Fe:4S]^2+/+ clusters. Binding of the accessory protein NifW parallels a decrease in the distance between these clusters, as well as a subtle change in their coordination. These results support a conformational role for NifW in P-cluster biosynthesis, bringing the two [4Fe:4S] precursors closer prior to their fusion, which may be crucial in challenging cellular contexts.

Upon binding of NifW, a subtle conformation change occurs in NifD₂K₂, decreasing the distance between the two [4Fe:4S] clusters precursors of the P-cluster in nitrogenase.     

Structure and Properties of [Fe(4)S(4){2,6-bis(acylamino)benzenethiolato-S}(4)](2)(-) and [Fe(2)S(2){2,6-bis(acylamino)benzenethiolato-S}(4)](2)(-): Protection of the Fe-S Bond by Double NH.S Hydrogen Bonds

Iron-sulfur clusters containing a singly or doubly NH.S hydrogen-bonded arenethiolate ligand, [Fe(4)S(4)(S-2-RCONHC(6)H(4))(4)](2)(-) (R = CH(3), t-Bu, CF(3)), [Fe(4)S(4){S-2,6-(RCONH)(2)C(6)H(3)}(4)](2)(-), [Fe(2)S(2)(S-2-RCONHC(6)H(4))(4)](2)(-) (R = CH(3), t-Bu, CF(3)), and [Fe(2)S(2){S-2,6-(RCONH)(2)C(6)H(3)}(4)](2)(-), were synthesized as models of bacterial [4Fe-4S] and plant-type [2Fe-2S] ferredoxins. The X-ray structures and IR spectra of (PPh(4))(2)[Fe(4)S(4){S-2,6-(CH(3)CONH)(2)C(6)H(3)}(4)].2CH(3)CN and (NEt(4))(2)[Fe(2)S(2){S-2,6-(t-BuCONH)(2)C(6)H(3)}(4)] indicate that the two amide NH groups at the o,o'-positions are directed to the thiolate sulfur atom and form double NH.S hydrogen bonds. The NH.S hydrogen bond contributes to the positive shift of the redox potential of not only (Fe(4)S(4))(+)/(Fe(4)S(4))(2+) but also (Fe(4)S(4))(2+)/(Fe(4)S(4))(3+) in the [4Fe-4S] clusters as well as (Fe(2)S(2))(2+)/(Fe(2)S(2))(3+) in the [2Fe-2S] clusters. The doubly NH.S hydrogen-bonded thiolate ligand effectively prevents the ligand exchange reaction by benzenethiol because the two amide NH groups stabilize the thiolate by protection from dissociation.     

M?ssbauer characterization of the iron-sulfur clusters in Desulfovibrio vulgaris hydrogenase.

The periplasmic hydrogenase of Desulfovibrio vulgaris (Hildenbourough) is an all Fe-containing hydrogenase. It contains two ferredoxin type [4Fe-4S] clusters, termed the F clusters, and a catalytic H cluster. Recent X-ray crystallographic studies on two Fe hydrogenases revealed that the H cluster is composed of two sub-clusters, a [4Fe-4S] cluster ([4Fe-4S](H)) and a binuclear Fe cluster ([2Fe](H)), bridged by a cysteine sulfur. The aerobically purified D. vulgaris hydrogenase is stable in air. It is inactive and requires reductive activation. Upon reduction, the enzyme becomes sensitive to O(2), indicating that the reductive activation process is irreversible. Previous EPR investigations showed that upon reoxidation (under argon) the H cluster exhibits a rhombic EPR signal that is not seen in the as-purified enzyme, suggesting a conformational change in association with the reductive activation. For the purpose of gaining more information on the electronic properties of this unique H cluster and to understand further the reductive activation process, variable-temperature and variable-field M?ssbauer spectroscopy has been used to characterize the Fe-S clusters in D. vulgaris hydrogenase poised at different redox states generated during a reductive titration, and in the CO-reacted enzyme. The data were successfully decomposed into spectral components corresponding to the F and H clusters, and characteristic parameters describing the electronic and magnetic properties of the F and H clusters were obtained. Consistent with the X-ray crystallographic results, the spectra of the H cluster can be understood as originating from an exchange coupled [4Fe-4S]-[2Fe] system. In particular, detailed analysis of the data reveals that the reductive activation begins with reduction of the [4Fe-4S](H) cluster from the 2+ to the 1+ state, followed by transfer of the reducing equivalent from the [4Fe-4S](H) subcluster to the binuclear [2Fe](H) subcluster. The results also reveal that binding of exogenous CO to the H cluster affects significantly the exchange coupling between the [4Fe-4S](H) and the [2Fe](H) subclusters. Implication of such a CO binding effect is discussed.     

Mechanistic insight into the nitrosylation of the [4Fe-4S] cluster of WhiB-like proteins

The reactivity of protein bound iron-sulfur clusters with nitric oxide (NO) is well documented, but little is known about the actual mechanism of cluster nitrosylation. Here, we report studies of members of the Wbl family of [4Fe-4S] containing proteins, which play key roles in regulating developmental processes in actinomycetes, including Streptomyces and Mycobacteria, and have been shown to be NO responsive. Streptomyces coelicolor WhiD and Mycobacterium tuberculosis WhiB1 react extremely rapidly with NO in a multiphasic reaction involving, remarkably, 8 NO molecules per [4Fe-4S] cluster. The reaction is 10(4)-fold faster than that observed with O(2) and is by far the most rapid iron-sulfur cluster nitrosylation reaction reported to date. An overall stoichiometry of [Fe(4)S(4)(Cys)(4)](2-) + 8NO → 2[Fe(I)(2)(NO)(4)(Cys)(2)](0) + S(2-) + 3S(0) has been established by determination of the sulfur products and their oxidation states. Kinetic analysis leads to a four-step mechanism that accounts for the observed NO dependence. DFT calculations suggest the possibility that the nitrosylation product is a novel cluster [Fe(I)(4)(NO)(8)(Cys)(4)](0) derived by dimerization of a pair of Roussin's red ester (RRE) complexes.     

Coordination of adenosylmethionine to a unique iron site of the [4Fe-4S] of pyruvate formate-lyase activating enzyme: a Mössbauer spectroscopic study

Pyruvate formate-lyase activating enzyme (PFL-AE) generates the catalytically essential glycyl radical of PFL. It is a member of the so-called "radical-SAM superfamily" of enzymes that use a [4Fe-4S] cluster and S-adenosylmethionine (AdoMet or SAM) to catalyze diverse radical-mediated reactions. Evidence suggests that this class of enzymes operate by common initial steps involving the generation of an AdoMet-derived adenosyl radical intermediate, of which the mechanism remains unresolved. The three-cysteine CX3CX2C cluster-binding motif common to all members of this superfamily suggests a unique Fe site in the [4Fe-4S] cluster, which presumably interacts with AdoMet to effect the reductive cleavage and radical generation. Here we employ a dual-iron-isotope (56Fe/57Fe) approach to demonstrate the existence of a unique Fe site in the [4Fe-4S] cluster of PFL-AE by M?ssbauer spectroscopy. Coordination of AdoMet to this unique Fe site was made evident by the observation of a substantial increase in the isomer shift (delta) of the M?ssbauer spectrum associated with the unique Fe site: delta = 0.42 mm/s in the absence of AdoMet increases to delta = 0.72 mm/s in the presence of AdoMet. Further, the M?ssbauer data show that the binding of AdoMet to the unique Fe site occurs in the [4Fe-4S]2+ state, prior to the injection of the reducing equivalent required for catalysis. This observation indicates that AdoMet coordination is a necessary prerequisite to adenosyl radical generation.     

Synthesis of heterometal cluster complexes by the reaction of cobaltadichalcogenolato complexes with groups 6 and 8 metal carbonyls

Metalladichalcogenolate cluster complexes [{CpCo(S2C6H4)}2Mo(CO)2] (Cp = eta(5)-C5H5) (3), [{CpCo(S2C6H4)}2W(CO)2] (4), [CpCo(S2C6H4)Fe(CO)3] (5), [CpCo(S2C6H4)Ru(CO)2(P(t)Bu3)] (6), [{CpCo(Se2C6H4)}2Mo(CO)2] (7), and [{CpCo(Se2C6H4)}(Se2C6H4)W(CO)2] (8) were synthesized by the reaction of [CpCo(E2C6H4)] (E = S, Se) with [M(CO)3(py)3] (M = Mo, W), [Fe(CO)5], or [Ru(CO)3(P(t)Bu3)2], and their crystal structures and physical properties were investigated. In the series of trinuclear group 6 metal-Co complexes, 3, 4, and 7 have similar structures, but the W-Se complex, 8, eliminates one cobalt atom and one cyclopentadienyl group from the sulfur analogue, 4, and does not satisfy the 18-electron rule. 1H NMR observation suggested that the CoW dinuclear complex 8 was generated via a trinuclear Co2W complex, with a structure comparable to 7. The trinuclear cluster complexes, 3, 4, and 7, undergo quasi-reversible two-step one-electron reduction, indicating the formation of mixed-valence complexes Co(III)M(0)Co(II) (M = Mo, W). The thermodynamic stability of the mixed-valence state increases in the order 4 < 3 < 7. In the dinuclear group 8 metal-Co complexes, 5 and 6, the CpCo(S2C6H4) moiety and the metal carbonyl moiety act as a Lewis acid character and a base character, respectively, as determined by their spectrochemical and redox properties. Complex 5 undergoes reversible two-step one-electron reduction, and an electron paramagnetic resonance (EPR) study indicates the stepwise reduction process from Co(III)Fe(0) to form Co(III)Fe(-I) and Co(II)Fe(-I).