Structural and dielectric behaviour of non-aqueous lyotropic mixtures: influence of amphiphile chain lengths and counter ions

This study highlights the effects of amphiphile chain length and counter ions on the self-assembly and dielectric behaviour of non-aqueous lyotropic liquid crystals. Two-dimensional hexagonal mesophase is seen for short-chain length sodium dodecyl sulphate, while lamellar and multiwall lamellar mesophases are noticed for long-chain length cetyltrimethylammonium bromide and polyoxyethylene (20) sorbitan monolaurate amphiphiles in the non-aqueous domains of ethylene glycol. A strong influence of amphiphile counter ions is seen on static dielectric constant, loss factor, relaxation frequency and relaxation time of these lyotropic mixtures. Refractive indices of these lyotropic phases are also highlighted.     

Shapes of Micelles and Molecular Geometry Synthesis and Studies on the Phase Behaviour, Surface Tension and Rheology of Rigid Rod-Like Surfactants in Aqueous Solutions

Amphiphiles with rigid rod-like hydrophobic moieties have been synthesized in order to investigate the effect of the packing restraints of such moieties on the micellar association behaviour of amphiphiles in aqueous solution. Investigations of the phase behaviour of amphiphile/water mixtures reveal that liquid-crystalline phases exist in defined temperature and concentration regimes and that they are all lamellar, regardless of the hydrophilic-hydrophobic balance of the amphiphile. For these lyotropic liquid-crystalline phases a polymorphism is observed which is similar to the polymorphism of thermotropic smectic liquid crystals. Surface tension measurements indicate critical micelle concentrations of the amphiphiles in dilute solutions which are similar to those of conventional surfactants. From rheological measurements it can be assumed that the variation of temperature and/or concentration of the solution does not influence the micellar shape. This is in contrast to the behaviour of non-ionic surfactants having a flexible hydrophobic group.     

Amphiphilic N-benzoyl-1-amino-1-deoxy-D-glucitol derivatives forming thermotropic lamellar, columnar and different types of cubic mesophases

Novel amphiphilic glucamine derivatives have been synthesized. These are N-benzoyl-1-deoxy1-methylamino-D-glucitols and N-benzoyl-1-amino-1-deoxy-D-glucitols carrying one, two or three aliphatic chains (CnH2n 1O- with n 3, 6 and 12) grafted to the benzamido group. The thermotropic mesophases of these compounds were studied by thermal polarizing optical microscopy and differential scanning calorimetry, and some also by X-ray scattering. Depending on the number and the length of the alkyl chains lamellar, bicontinuous cubic, hexagonal columnar or inverted micellar cubic mesophases were detected by analogy with lyotropic systems. In the contact region between lamellar phases of the single chain amphiphiles and micellar cubic phases of the mesomorphic triple chain compounds, hexagonal columnar phases can be induced. A hexagonal columnar phase was also induced in the contact region between a bicontinuous and a micellar cubic mesophase. The lyotropic liquid crystalline behaviour of the dodecyloxy substituted N-benzoyl-1-deoxy-1-methylamino-D-glucitols was investigated by the solvent penetration method using ethylene glycol as protic solvent. On increasing the solvent content, the double chain compound forms a cubic and a lamellar mesophase and the triple chain compound forms a hexagonal columnar lyomesophase. The dodecyloxy substituted compounds were also investigated with respect to their behaviour as thin films at the air-water interface using a Langmuir film-balance. Different types of pi/Aisotherms were observed whereby the molecular areas at collapse were determined either by the size of the carbohydrate head group (single chain compounds) or by the number of alkyl chains (double and triple chain compound).     

Lyotropic smectic layering of side-on polysoaps in water

 The synthesis and characterization of lyotropic smectic amphiphilic side-on polymers are described. The amphiphile consists of a rigid, aromatic core with two terminal ethyleneoxide chains of various lengths and is laterally attached to a polysiloxane backbone; the length of the spacer has also been varied. The phase behavior of the monomeric amphiphiles and side-on polymers are determined by polarizing microscopy and ²H-NMR measurements. In water, most of the low molecular weight surfactants show restricted lyotropic properties, namely lyotropic smectic phases. The packing restriction of the amphiphiles is due to their geometric anisometry. All side-on polymers exhibit only lyotropic smectic phases. The phase regime of the polymer mesophase with respect to the monomers depends on the spacer length. In contrast to surfactants having a flexible hydrophobic group, these amphiphiles align spontaneously parallel to an external magnetic field, leading to perfect lyotropic smectic monodomains. Received: 21 May 2001 Accepted: 27 August 2001     

A lyotropic nematic phase of lamellar micelles (N L) obtained by a non-ionic surfactant in aqueous solution

A non ionic surfactant with a rigid rod-like hydrophobic group has been synthesized. Owing to the molecular geometry of the surfactant only lamellar micelles are formed in aqueous solution.This system exhibits a lyotropic nematic phase (N _L), which for the first time has been found for a binary non ionic surfactant/water system.Herrn Professor Dr. H.-G. Kilian mit herzlichen Glückwünschen zum 60. Geburtstag gewidmet.     

Phase behaviour of lyotropic liquid crystalline side chain polymers in aqueous solutions

Amphiphilic lyotropic liquid crystalline surfactants are synthesized displaying 10-undecenoic acid as hydrophobic and ethyleneglycol units as hydrophilic parts of the molecules. By addition reaction of the monomeric surfactants with poly [oxy(methylsilylene)], the surfactants are attached as side chains to the siloxane main chain. The phase behaviour of a polymer-water system and the corresponding monomer-water system is investigated by polarizing microscopy. The monomeric surfactant exhibits a liquid crystallineM ₁-phase of hexagonally packed, rod-like micelles in a concentration range of 49 to 70% surfactant. The liquid crystalline state of the polymeric surfactant is more stable, which is indicated by a broader temperature- and concentration range (35%–90% polymer surfactant). At lower concentration aM ₁-phase exists, which is separated by a cubic phase from a lamellarG-phase at higher concentration of the polymer surfactant. Compared to the monomeric system, the increased stability of the polymeric mesophase can be understood by the restriction of motions of the amphiphiles due to the linkage to the polymer main chain.Dedicated to Prof. Dr. F. H. Müller.The authors are greatly indebted to Wacker Chemie, D-Burghausen, FRG for kindly delivering the poly(hydrogensiloxane).     

Amphotropic liquid crystals

The liquid crystalline state is a fundamental organization of matter, which combines order and mobility on a molecular, supramolecular and macroscopic level. In many cases the molecules can show both thermotropic and lyotropic liquid-crystalline (LC) phases, which is described as amphotropic behavior. Block-copolymers, polyhydroxy amphiphiles, disc-like, rod-like, polycatenar and banana-shaped LC molecules are discussed with respect to their amphotropic behavior with specific and non-specific solvents. The interactions of salts with polyether chains, leading to halotropic mesophases, and the interaction of aromatic electron acceptor molecules with electron-rich aromatic molecular parts are discussed in relation to lyotropic mesomorphism induced by classical solvent molecules. Polyphilic amphotropic materials showing more complex mesophase morphology and amphiphiles showing a hierarchical order of different levels of order are pointed out as future directions.     

Chelating DTPA amphiphiles: ion-tunable self-assembly structures and gadolinium complexes

A series of chelating amphiphiles and their gadolinium (Gd(iii)) metal complexes have been synthesized and studied with respect to their neat and lyotropic liquid crystalline phase behavior. These amphiphiles have the ability to form ion-tunable self-assembly nanostructures and their associated Gd(III) complexes have potential as magnetic resonance imaging (MRI) contrast enhancement agents. The amphiphiles are composed of diethylenetriaminepentaacetic acid (DTPA) chelates conjugated to one or two oleyl chain(s) (DTPA-MO and DTPA-BO), or isoprenoid-type chain(s) of phytanyl (DTPA-MP and DTPA-BP). The thermal phase behavior of the neat amphiphiles was examined by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and cross polarizing optical microscopy (POM). Self-assembly of neat amphiphiles and their associated Gd complexes, as well as their lyotropic phase behavior in water and sodium acetate solutions of different ionic strengths, were examined by POM and small and wide angle X-ray scattering (SWAXS). All neat amphiphiles exhibited lamellar structures. The non-complexed amphiphiles showed a variety of lyotropic phases depending on the number and nature of the hydrophobic chain in addition to the ionic state of the hydration. Upon hydration with increased Na-acetate concentration and the subtle changes in the effective headgroup size, the interfacial curvature of the amphiphile increased, altering the lyotropic liquid crystalline structures towards higher order mesophases such as the gyroid (Ia3d) bicontinuous cubic phase. The chelation of Gd with the DTPA amphiphiles resulted in lamellar crystalline structures for all the neat amphiphiles. Upon hydration with water, the Gd-complexed mono-conjugates formed micellar or vesicular self-assemblies, whilst the bis-conjugates transformed only partially into lyotropic liquid crystalline mesophases.     

The liquid-crystalline behaviour of amphiphilic ethane-1,2-diol derivatives incorporating a six membered ring in their principal structure

Novel 3-phenyloxy substituted propane-1,2-diol derivatives, 4-(4-n-hexyloxyphenyl)-butane-1,2-diol and 4-(trans-4-n-pyropylcyclohexyl)-butane-1,2-diol have been synthesized and their thermal behaviour has been studied. These compounds exhibit thermotropic and, after addition of water, also lyotropic liquid-crystalline behaviour. The clearing temperatures of the smectic mesophases were found to be strongly dependent on the alkyl chain length and on the structural units that link the aromatic ring to the alkyl chain and to the diol unit. The behaviour of the aromatic compounds is compared with that of the cyclohexane derivative. Thereby it has been realized that the mesophase stability of the amphiphilic diols incorporating a rigid unit is largely determined by both, the molecular geometry (molecular shape and intramolecular flexibility) and the amphiphilic structural pattern.     

Novel surfactant mesostructural topologies: between lamellae and columnar (hexagonal) forms

Recent developments in theoretical and experimental studies of amphiphilic lyotropic ‘intermediate’ mesophase formation are summarized. For the purposes of the review, we consider intermediate mesophases to be self-assemblies with novel geometries and topologies, excluding lamellar, bicontinuous sponge, columnar (hexagonal) and micellar mesophases. Intermediates include novel branched bilayer topologies, enclosing multiple interwoven channel systems and inclined rod packings, and punctured bilayer morphologies, including mesh phases and bicontinuous monolayers.     

Morphology and Conformation Analysis of Self‐Assembled Triblock Copolymer Melts

Summary: We used the dissipative particle dynamics method to simulate the self‐assembly of symmetric triblock copolymers of the type ABA. Depending on the volume fraction of the end blocks f_A, several mesophases including lamellar, perforated lamellar, gyroid, hexagonal cylinders and bcc spherical micelles were obtained. The order‐disorder transition (ODT) at f_A = 0.5 was found to be about χN = 19.8. The ODT for the cylindrical mesophase at symmetrical points on the phase diagram had different values, indicating asymmetry in the phase diagram. We were also able to estimate the bridge fraction in the different mesophases. They range from about 0.44 for the lamellar mesophase to about 0.75 for the spherical micelles. Our simulation results are in good agreement with previously reported theoretical calculations and experimental observations.

The hexagonal cylinders generated with the A₆B₄A₆ copolymer.     

Structural variations in amphiphiles: Discoidal multivalent cations

Fourteen cationic multipolar amphiphiles have been synthesized with pyridinium or trimethylammonium head groups. The hydrophobic cores are planar ring systems (benzene or triphenylene) to which two, three, four, or six decylene or undecylene alkyl chains are attached by ester linkages. The hydrophilic head groups are bound to the outer ends of the alkyl chains.The aggregation of the molecules in water into micelles and lyotropic liquid crystals has been studied. Hexagonal phases are preferred to lamellar phases by these amphiphiles and in more dilute solutions some of these multipolar amphiphiles form cylindrical micelles.     

Synthesis and mesophase behaviour of rigid rod‐like phenylthiophene‐based amphiphilic diol derivatives

Novel amphiphilic block molecules consisting of a rigid 2‐phenylthiophene or 5‐phenylbithienyl core, with a polar glycerol group attached to the phenyl ring and one or two alkyl chains attached to the thiophene ring on the other side, have been synthesised by using Ni(0) and Pd(0) catalyzed coupling reactions as key steps. The thermotropic and solvent‐induced liquid crystalline behaviour of these compounds was investigated by polarising optical microscopy and X‐ray diffraction. The influence of the length, number and position of the alkyl chains, and the length of the rigid core, on their mesophase behaviour was investigated. Compounds with one alkyl chain in the terminal 5‐position on the thiophene ring form only smectic A phases, compounds with two adjacent alkyl chains attached in the 4‐ and 5‐positions of the thiophene ring exhibit thermotropic columnar mesophases, and those with two long alkyl chains attached to the 3‐ and 5‐positions form columnar LC phases only in the presence of water. Another compound containing the longer 5‐phenylbithienyl core unit and two alkyl chains attached in lateral positions to each of the thiophene rings is not mesogenic.     

Electron and light microscopical investigation of defect structures in mesophases of pharmaceutical substances

 Transmission electron microscopy of freeze fractured and replicated samples (TEM) and polarizing light microscopy (PLM) are used to investigate the defect structures of the thermotropic and lyotropic mesophases of the non-steroidal antiinflammatory drug fenoprofen sodium and of the thermotropic mesophase of the nonionic surfactant sucrose oleate (O1570). All mesophases have a layered, smectic structure. The thermotropic liquid crystal of feno-profen sodium is an interdigitated smectic A phase (smectic Ad) having the highest viscosity of the investigated samples. The thermotropic mesophase of the sugar ester is also of the type smectic A, likely to be of subtype smectic A2 (bilayered smectic structure). The lyotropic mesophase is of lamellar liquid crystalline nature and has a much lower viscosity than the thermotropic mesophases. In the PLM the lyotropic fenoprofen mesophase has a strong tendency to form a pseudoisotropic texture, indicating a strong tendency to form undisturbed layered structures. Other textures exhibited in the PLM are fan-shaped texture and maltese-cross texture. Confocal domains, cylinders, pits and peaks as well as screw dislocations are found in great number in the TEM. However, no greater regions of undisturbed lamellar arrangement in the lyotropic mesophase could be detected. The only texture of the thermotropic fenoprofen mesophase visible in the PLM is the fan-shaped texture, indicating confocal domains as predominant structural elements. However, no confocal domains (tori or Dupin cyclides) are found in the TEM. In the PLM the sugar–ester mesophase exhibited a fan-shaped texture, maltese crosses and oily streaks as dominant textures. In the TEM only a few +π and −π disclinations and imperfect confocal domains could be detected. The discrepancies in the appearance of defect structures and textures between the mesophases as well as the discrepancies in the findings in the PLM and in the TEM investigations are caused by the different sample preparation and the different viscosities of the mesophases. Received: 28 May 1997 Accepted: 2 September 1997     

Novel Amphiphilic Block Copolymers for the Formation of Stimuli-Responsive Non-Lamellar Lipid Nanoparticles

Non-lamellar lyotropic liquid crystalline (LLC) lipid nanoparticles contain internal multidimensional nanostructures such as the inverse bicontinuous cubic and the inverse hexagonal mesophases, which can respond to external stimuli and have the potential of controlling drug release. To date, the internal LLC mesophase responsiveness of these lipid nanoparticles is largely achieved by adding ionizable small molecules to the parent lipid such as monoolein (MO), the mixture of which is then dispersed into nanoparticle suspensions by commercially available poly(ethylene oxide)–poly(propylene oxide) block copolymers. In this study, the Reversible Addition-Fragmentation chain Transfer (RAFT) technique was used to synthesize a series of novel amphiphilic block copolymers (ABCs) containing a hydrophilic poly(ethylene glycol) (PEG) block, a hydrophobic block and one or two responsive blocks, i.e., poly(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl acrylate) (PTBA) and/or poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA). High throughput small angle X-ray scattering studies demonstrated that the synthesized ABCs could simultaneously stabilize a range of LLC MO nanoparticles (vesicles, cubosomes, hexosomes, inverse micelles) and provide internal particle nanostructure responsiveness to changes of hydrogen peroxide (H₂O₂) concentrations, pH and temperature. It was found that the novel functional ABCs can substitute for the commercial polymer stabilizer and the ionizable additive in the formation of next generation non-lamellar lipid nanoparticles. These novel formulations have the potential to control drug release in the tumor microenvironment with endogenous H₂O₂ and acidic pH conditions.     

The effect of shear on ordered block copolymer solutions

Block copolymers are extensively used in solution, especially aqueous solution, because of their amphiphilic character. This leads to the formation of lyotropic mesophases under given conditions of concentration and temperature. In many applications, block copolymer solutions are subjected to shear during processing (for example in drug delivery or when washing in detergent solutions) and thus it is of considerable interest to understand how shear affects the mesophase structure. Recent research has focussed on probing shear-induced structural transformations in lamellar, hexagonal and cubic-packed micellar phases using small-angle X-ray and neutron scattering.     

New Lyotropic nematic phases with unusual anisotropies of magnetic susceptibility: Type I DM and type II CM

Two lyotropic mesophases of opposite signs of susceptibility anisotropy have been found, one a quaternary and the other a ternary phase. Conclusive evidence is presented that the disk-micelle mesophase has positive diamagnetic anisotropy and the rod-like micelle phase has negative anisotropy. These have been named type I DM and type II CM mesophases respectively to conform with the notation previously introduced for mesophases based on aliphatic chain surfactants.     

Effect of transition metal salt additive on the structural packing and thermal stability of the non-aqueous lyotropic mesophases

The present study demonstrates the interfacial interplay between transition metal salt (TMS) additive and range of non-aqueous lyotropic mesophases. Structural aspect reveals the substantial influence of the additive addition on the self-assembly and packing of micelles as intense growth of hexagonal planes was seen in the vicinity of the pre-existed lamellar mesophase (as the surfactant concentration loomed to the higher value in the parent binary mixture). Such structural modulations certainly resulted from reduction in optimal surface area of head group and packing parameter under the influence of interfacial interactions amid charged counter ions and metal salt additive. The origin and thermal stability of hexagonal ordering have been addressed and discussed.     

Cross-shaped mesogens in main chain polymers

The synthesis of semiflexible main chain polyesters with cross-shaped mesogens and their phase behaviour, investigated by polarizing microscopy, DSC and X-ray diffraction, is presented. Polyesters of this type show mesophases with dominating nematic character and relatively high clearing temperatures. Systematic variation of the spacer and the terminal groups of the mesogens shows that longitudinally fixed rod-like parts of the mesogens have a strong influence on the clearing temperature and, therefore, on the mesophase behaviour. The corresponding rod-like but laterally fixed parts of the cross-shaped mesogens influence the melting temperatures significantly. This is critical in determining crystallization. However, laterally fixed rod-like parts contribute also to the formation of mesophases, but clearly to a far less extent.     

Chromonic liquid crystals formed by CI Acid Red 266 and related structures

Chromonic liquid crystals are currently receiving increased attention because they have applications in a wide range of products. In this study, we have compared the chromonic mesophase behaviour of four azo dyes with similar chemical structures. Our objective is to determine if there is an obvious link between mesophase formation and dye chemical structure. Orange G does not form mesophases over the concentration range examined (saturated solution > ~20–30 wt%). The other three compounds all form nematic (N) and hexagonal (H) mesophases, but over very different concentration ranges. X-ray diffraction shows that the ordered Edicol Sunset Yellow (ESY) aggregates present in the mesophases have a single molecule cross section, while those of CI Acid Red have a cross section equivalent to six to eight molecules, probably organised in a ‘water-filled pipes’ structure. NMR quadrupole splittings of ²H₂O demonstrate that water binding to the aggregates is similar to that found for surfactant lyotropic mesophases. The sodium (²³Na) quadrupole splittings for Orange II and CI Acid Red are similar to the values found for surfactant hexagonal phases, suggesting that most sodium ions are ‘bound’ to the aggregates. This is unlike the behaviour of ESY where only one of the two sodium ions is bound.