Sidewall carboxylic acid functionalization of single-walled carbon nanotubes

The reactions of single-walled carbon nanotubes (SWNTs) with succinic or glutaric acid acyl peroxides in o-dichlorobenzene at 80-90 degrees C resulted in the addition of 2-carboxyethyl or 3-carboxypropyl groups, respectively, to the sidewalls of the SWNT. These acid-functionalized SWNTs were converted to acid chlorides by derivatization with SOCl(2) and then to amides with terminal diamines such as ethylenediamine, 4,4'-methylenebis(cyclohexylamine), and diethyltoluenediamine. The acid-functionalized SWNTs and the amide derivatives were characterized by a set of materials characterization methods including attenuated total reflectance (ATR) FTIR, Raman and solid state (13)C NMR spectroscopy, transmission electron microscopy (TEM), and thermal gravimetry-mass spectrometry (TG-MS). The degree of SWNT sidewall functionalization with the acid-terminated groups was estimated as 1 in 24 carbons on the basis of TG-MS data. In comparison with the pristine SWNTs, the acid-functionalized SWNTs show an improved solubility in polar solvents, for example, alcohols and water, which enables their processing for incorporation into polymer composite structures as well as for a variety of biomedical applications.     

Processable hybrids of ferrocene-containing poly(phenylacetylene)s and carbon nanotubes: fabrication and properties

A group of ferrocene-containing poly(phenylacetylene)s (PPAs) with different alkyl spacers were synthesized by using organorhodium complexes [Rh(diene)Cl](2) and Rh (+)(nbd)[C(6)H(5)B (-)(C(6)H(5))(3)] as catalysts. With the aid of pi-pi interactions between the walls of carbon nanotubes (CNTs) and the PPA skeleton together with the ferrocene pendants, the polymer (P 1, P2(5) and P2(10)) chains effectively wrapped round the shells of both single-walled carbon nanotubes (SWNTs) and multiwalled carbon nanotubes (MWNTs). The "additive effect" of the PPA skeleton and the ferrocene pendants in dispersing the SWNTs and MWNTs resulted in the generation of highly soluble hybrids. The solubilities of P 1-functionalized SWNTs and MWNTs in tetrahydrofuran (THF) are up to 633 mg/L and 967 mg/L, respectively. They are much higher than the solubilities of M 1-modified SWNTs and MWNTs, which are only 167 mg/L and 133 mg/L in THF. The results indicate the existence of a powerful polymer effect on dispersing CNTs. The high solubilities of the hybrids in organic solvents allowed us to fabricate high-quality and large-area films. Meanwhile, the desirable loading of ferrocene-containing PPAs onto the CNTs offered polymer/CNTs hybrids with multiple redox centers and ferrocene-featured electrochemical properties. The P 1/MWNT hybrid exhibits evident optical-limiting properties. At high incident laser fluence, the optical-limiting power of P 1/MWNT is higher than that of C(60), a well-known optical limiter. Thermal analyses indicate that the decomposition temperatures ( T(d), the temperature at which a sample loses its 5% weight) for P1 and P1/MWNT are 342 and 346 degrees C, respectively, much higher than that for PPA (225 degrees C). Thus the attachment of a ferrocene pendant to a PPA backbone, followed by hybridization with CNTs, improved the thermal stability. Upon pyrolysis, both the polymer and the polymer/CNTs hybrid gave rise to superparamagnetic ceramics; the saturation magnetizations ( M(s)) of the ceramics derived from P1 and P1/MWNT are 29.9 and 26.9 emu/g, respectively. The latter datum is in the list of the best results reported for the magnetic nanocomposites obtained by the attachment of magnetic nanoparticles onto CNTs.     

Creating patterned carbon nanotube catalysts through the microcontact printing of block copolymer micellar thin films

We report a route for synthesizing patterned carbon nanotube (CNT) catalysts through the microcontact printing of iron-loaded poly(styrene-block-acrylic acid) (PS-b-PAA) micellar solutions onto silicon wafers coated with thin aluminum oxide (Al(2)O(3)) layers. The amphiphilic block copolymer, PS-b-PAA, forms spherical micelles in toluene that can form quasi-hexagonal arrays of spherical PAA domains within a PS matrix when deposited onto a substrate. In this report, we dip a poly(dimethylsiloxane) (PDMS) molded stamp into an iron-loaded micellar solution to create a thin film on the PDMS features. The PDMS stamp is then put in contact with a substrate, and uniaxial compressive stress is applied to transfer the micellar thin film from the PDMS stamp onto the substrate in a defined pattern. The polymer is then removed by oxygen plasma etching to leave a patterned iron oxide nanocluster array on the substrate. Using these catalysts, we achieve patterned vertical growth of multiwalled CNTs, where the CNTs maintain the fidelity of the patterned catalyst, forming high-aspect-ratio standing structures.     

Helical superstructures of fullerene peapods and empty single-walled carbon nanotubes formed in water

Aqueous dispersions of fullerene C70-filled carbon nanotubes (C70@SWNTs or peapods) and empty single-walled carbon nanotubes (empty SWNTs) were prepared with the aid of trimethyl-(2-oxo-2-pyrene-1-yl-ethyl)-ammonium bromide (1), which is a carbon nanotube solubilizer. This is the first report describing the preparation and characterization of the transparent dispersion/dissolution of the peapods. The UV-vis-near-IR spectra of C70@SWNTs-1 and empty SWNTs-1 were almost identical. We found by means of transmission electron microscopy and atomic force microscopy that the empty SWNTs and C70-peapods form helical nanostructures in the shapes of rings, irregular rings, lassos, handcuffs, catenanes, pseudorotaxanes, and figure-eight structures. The mechanism of the superstructure formation has been discussed in relation to the unique characteristics of stiff polymer chains with the aid of an off-lattice Monte Carlo simulation.     

Single-walled carbon nanotube-templated crystallization of H2SO4: direct evidence for protonation

Liquid anhydrous sulfuric acid forms molecular "shells" wrapped around single-walled carbon nanotubes (SWNTs). Temperature-dependent X-ray scattering from aligned acid-swollen fibers shows that crystallization of the bulklike acid surrounding the structured shells is templated by the aligned SWNTs, while the structured shells remain partly ordered, at least for temperatures from 100 to 500 K. The (2 0 0) or ( 0 2) planes of the templated H2SO4 crystallites are parallel to the nanotube axes. This provides solid evidence for the direct protonation of SWNT since the molecules are terminated by hydrogen bonds.     

Lithium storage in single-walled carbon nanotubes

Here, we investigated the lithium insertion/extraction mechanism in single-walled carbon nanotubes (SWNTs) based both on the empty SWNTs and filled SWNTs, including ferrocene-filled SWNTs (Fc@SWNTs) and C₆₀-filled SWNTs (C₆₀@SWNTs). SWNTs, C₆₀@SWNTs and Fc@SWNTs were systematically investigated as anode materials for Li-ion batteries. The electrochemical performance of the C₆₀@SWNT electrode was slightly better than that of the SWNTs, and the reversible capacity of Fc@SWNTs per unit weight was ～1.7 times greater than that of the empty SWNTs due to its special tube internal structure. It was proved that the dominant reversible sites for lithium storage in empty SWNTs are the trigonal interstitial channels. Meanwhile, lithium can reversibly insert or extract the inner channels of the tubes after doping with ferrocene; the reversible capacity presented in the inner channels of Fc@SWNTs is about Li_1.13C₆.     

聚苯乙烯-b-聚丙烯酸/聚苯乙烯-b-聚甲基丙烯酸氨基丙二醇酯二元胶束的杂化作用

用光散射技术和透射电镜研究了聚苯乙烯-b-聚甲基丙烯酸氨基丙二醇酯胶束和聚苯乙烯-b-聚丙烯酸胶束在水中的相互作用.结果表明,壳层带有氨基和羟基的聚苯乙烯-b-聚甲基丙烯酸氨基丙二醇酯胶束和壳层带有羧基的聚苯乙烯-b-聚丙烯酸胶束在水中可以通过胶束之间的链交换形成壳层结构致密的杂化胶束,温度的升高有助于胶束之间链交换的进行,并提出了形成杂化胶束的链交换机理.     

Chemical vapor depositions of single-walled carbon nanotubes catalyzed by uniform fe(2)o(3) nanoclusters synthesized using diblock copolymer micelles

Inversed micelles formed by polystyrene-block-poly(2-vinyl-pyridine) in toluene loaded with FeCl3 were used to synthesize and deliver discrete Fe2O3 nanoclusters with uniform diameters to flat substrates. Single-walled carbon nanotubes (SWNTs) were grown by chemical vapor deposition using these nanoclusters as the catalysts. Atomic force microscope characterizations revealed that high density SWNT mats were grown on the surface and the diameter of nanotubes was controlled by the diameter of nanoclusters. Electrical measurement revealed that the dense SWNT mats contained both semiconducting and metallic SWNTs and could be used to build thin film transistors.     

A highly selective, one-pot purification method for single-walled carbon nanotubes

We report on a one-pot, highly selective chemistry to remove residual catalysts from single-walled carbon nanotubes (SWNTs). The impurities, initially present at approximately 35 wt % and mostly as carbon-coated iron nanoparticles, can be driven below 5 wt % with nearly no loss of SWNTs. The carbon-coated iron impurities are dissolved simply by reacting with an aqueous mixture of H2O2 and HCl at 40-70 degrees C for 4-8 h. This purification combines two known reactions involving H2O2 and HCl, respectively; however, by combining these two typically inefficient reactions into a one-pot reaction, the new process is surprisingly selective toward the removal of the metal impurities. This high selectivity derives from the proximity effect of the iron-catalyzed Fenton chemistry. At pH approximately 1-3, iron is dissolved upon exposure, avoiding the otherwise aggressive iron-catalyzed digestion of SWNTs by H2O2. This extremely simple and selective chemistry offers a "green" and scalable process to purify carbon nanotube materials.     

The radiation degradation of a nanotube-polyimide nanocomposite

The radiation degradation of a nanotube-polyimide nanocomposite was studied. Radiation chemistry was observed that was not present in the unmodified polymer or in the imbedded single-walled carbon nanotubes (SWNTs) themselves. The tensile properties were found to be improved by the addition of SWNTs in the unirradiated materials, and no deterioration in these properties with irradiation was observed. The SWNTs were found to have a detrimental effect on the optical properties however. The transparency of the composite was degraded significantly faster by electron-beam radiation than the neat polymer was. This may make the SWNT/polyimide composites unsuitable for some space applications. Electron Spin Resonance (ESR) measurements determined that the SWNTs interfere with the radical chemistry in the irradiated materials. This could be due to energy dissipation by the SWNT network, preventing the formation of radical species, or alternatively, preferential reaction or termination of radicals by the nanotubes. FT-Raman spectroscopy was found to be a very useful tool for examining SWNTs embedded at low concentrations. It revealed no signs of SWNT degradation up to 10 MGy.     

Encapsulation of ionic liquids within polymer shells via vapor phase deposition

We demonstrate the use of vapor phase deposition to completely encapsulate ionic liquid (IL) droplets within robust polymer shells. The IL droplets were first rolled into liquid marbles using poly(tetrafluoroethylene) (PTFE) particles because the marble structure facilitates polymerization onto the entire surface area of the IL. Polymer shells composed of 1H,1H,2H,2H-perfluorodecyl acrylate cross-linked with ethylene glycol diacrylate (P(PFDA-co-EGDA)) were found to be stronger than the respective homopolymers. Fourier transform infrared spectroscopy showed that the PTFE particles become incorporated into the polymer shells. The integration of the particles increased the rigidity of the polymer shells and enabled the pure IL to be recovered or replaced with other fluids. Our encapsulation technique can be used to form polymer shells onto dozens of droplets at once and can be extended to encapsulate any low vapor pressure liquid that is stable under vacuum conditions.     

Recoverable solution reaction of HiPco carbon nanotubes with hydrogen peroxide

There is increasing interest in developing single-walled carbon nanotubes (SWNTs)-based optical biosensors for remote or in vitro and in vivo sensing because the near-IR optical properties of SWNTs are very sensitive to surrounding environmental changes. Many enzyme-catalyzed reactions yield hydrogen peroxide (H(2)O(2)) as a product. To our knowledge, there is no report on the interaction of H(2)O(2) with SWNTs from the optical sensing point of view. Here, we study the reaction of H(2)O(2) with an aqueous suspension of water-soluble (ws) HiPco SWNTs encased in the surfactant sodium dodecyl sulfate (SDS). The SWNTs are optically sensitive to hydrogen peroxide in pH 6.0 buffer solutions through suppression of the near-IR absorption band intensity. Interestingly, the suppressed spectral intensity of the nanotubes recovers by increasing the pH, by decomposing the H(2)O(2) into H(2)O and O(2) with the enzyme catalase, and by dialytically removing H(2)O(2). Preliminary studies on the mechanisms suggest that H(2)O(2) withdraws electrons from the SWNT valence band by charge transfer, which suppresses the nanotube spectral intensity. The findings suggest possible enzyme-assisted molecular recognition applications by selective optical detection of biological species whose enzyme-catalyzed products include hydrogen peroxide.     

Soluble ultra-short single-walled carbon nanotubes

Soluble, ultra-short (length < 60 nm), carboxylated, single-walled carbon nanotubes (SWNTs) have been prepared by a scalable process. This process, predicated on oleum's (100% H2SO4 with excess SO3) ability to intercalate between individual SWNTs inside SWNT ropes, is a procedure that simultaneously cuts and functionalizes SWNTs using a mixture of sulfuric and nitric acids. The solubility of these ultra-short SWNTs (US-SWNTs) in organic solvents, superacid and water is about 2 wt %. The availability of soluble US-SWNTs could open opportunities for forming high performance composites, blends, and copolymers without inhibiting their processibility.     

Stable containment of radionuclides on the nanoscale by cut single-wall carbon nanotubes

The physisorption of radiolabeled (125)I(-) ions from aqueous solution and the Brunauer-Emmett-Teller (BET) surface areas of various carbonaceous materials [HiPco single-wall carbon nanotubes (SWNTs), F-SWNTs, cut SWNTs, charcoal, graphite, F-graphite and C(60)] have been measured and compared. By far, cut SWNTs (mainly 20-50 nm lengths) displayed the largest surface area of the materials (1180 m(2).g(-1)), being approximately double that of uncut SWNT and charcoal. At low concentrations of (125)I(-), nearly all of the (125)I(-) was adsorbed from aqueous solution within 1 min at room temperature by the cut SWNTs, uncut SWNTs, and charcoal; the other materials showed much less adsorption under the same conditions. Once adsorbed, the (125)I(-) wash-off rate by pure water was highly variable but was especially slow for cut SWNTs (t(1/2) approximately 2720 h) compared to the other materials; wash-off of (125)I(-) by an aqueous H(2)O(2) solution was even slower (t(1/2) approximately 14 300 h). Taken together, these data demonstrate the greatly increased surface area and dramatically enhanced retention properties of cut SWNTs over uncut SWNTs.     

Controlling photochromism between fluoroalkyl end-capped oligomer/polyaniline and N,N'-diphenyl-1,4-phenylenediamine nanocomposites induced by UV-light-responsive titanium oxide nanoparticles

Debundling and selective dispersion of semiconducting single-walled carbon nanotubes (SWNTs) has been demonstrated using a neutral pH water soluble chitosan derivative, N-acetylated chitosan (NACHI), which is synthesized by controlled N-acetylation of chitosan using acetic anhydride. The SWNT-NACHI supernatant solution demonstrated semiconductor-enriched property owing to the preferential adsorption of N-groups of the NACHI on semiconducting nanotubes with a fairly weak charge transfer. The dispersion of nearly individualized SWNTs achieved by surface modification of nanotubes with a biocompatible polymer can be utilized for electronic and biomedical applications such as field effect transistor, biosensor, cell culture medium and SWNT-biomacromolecule hybrid materials.     

Supramolecular catalysts for the gas-phase synthesis of single-walled carbon nanotubes

Reversed micelles containing metallic ions have been used as precursors of novel catalysts for the gas-phase synthesis of single-walled carbon nanotubes (SWNTs). This technique possesses the following advantages: (i) excellent solubility in organic solvents, which are used as reactants and (ii) facile preparation of multicomponent catalysts enabling systematic screening of catalyst compositions for the synthesis of SWNTs. In this study, we report the results of the screening study on the catalytic behavior of Fe-Mo binary catalysts during the synthesis of SWNTs. The results suggested that the catalytic ability was closely related to the strain of the crystal structure of Fe-Mo catalysts formed in the reaction and/or the phase transition caused by dissolution of the Mo atoms. The addition of lithium to the Fe-Mo binary catalysts has revealed an increase in the yield of SWNTs.     

Individual dissolution of single-walled carbon nanotubes in aqueous solutions of steroid or sugar compounds and their Raman and near-IR spectral properties

The individual solubilization of single-walled carbon nanotubes (SWNTs), achieved by using ten different anionic-, zwitterionic-, and nonionic-steroid biosurfactants and three different sugar biosurfactants, was examined. Aqueous micelles of anionic cholate analogues, such as sodium cholate (SC), sodium deoxycholate (SDC), sodium taurocholate (STC), sodium taurodeoxycholate (STDC), sodium glycocholate (SGC), as well as N,N-bis(3-D-gluconamidopropyl)cholamide (BIGCHAP) and N,N-bis(3-D-gluconamidopropyl)deoxycholamide (deoxy-BIGCHAP), exhibited good abilities to dissolve the SWNTs individually. Aqueous micelles of nonionic biosurfactants, such as sucrose monocholate (SMC), n-octyl-beta-D-glucoside (OG), n-decyl-beta-D-maltoside (DM), and n-decanoyl-N-methylglucamide (MEGA-10), could dissolve the SWNTs, however, the solubilization abilities were weaker than those of the anionic cholate analogues. In sharp contrast, the solubilization abilities of the zwitterionic micelles of 3-[(3-cholamidopropyl)dimethylammonio]propanesulfonic acid (CHAPS) and 3-[(3-cholamidopropyl)dimethylammonio]-2-hydroxypropanesulfonic acid (CHAPSO) were very low, and almost zero for OG. It is evident that the chemical structures, in particular the substituent groups of the surfactants, play an important role in the solubilization of SWNTs. The near-IR photoluminescence behaviors of the SWNTs dissolved in aqueous micelles and in 1 mM biosurfactants were investigated. The chirality indices of the SWNTs dissolved in these solutions depend on the chemical structures of the biosurfactants. The Raman spectra of the SWNTs dissolved in a 1 mM solution of SC suggest the selective extraction of the metallic SWNTs. Finally, a possible solubilization mechanism using steroid surfactants is described. The SWNTs dissolved individually in water-containing biocompounds are useful in many areas of nano- and materials chemistry.     

Increasing protein stability through control of the nanoscale environment

We have discovered a novel property of single-walled carbon nanotubes (SWNTs)-their ability to stabilize proteins at elevated temperatures and in organic solvents to a greater extent than conventional flat supports. Experimental results and theoretical analysis reveal that the stabilization results from the curvature of SWNTs, which suppresses unfavorable protein-protein lateral interactions. Our results also indicate that the phenomenon is not unique to SWNTs but could be extended to other nanomaterials. The protein-nanotube conjugates represent a new generation of active and stable catalytic materials with potential use in biosensors, diagnostics, and bioactive films and other hybrid materials that integrate biotic and abiotic components.     

Protonation of carbon single-walled nanotubes studied using 13C and 1H-13C cross polarization nuclear magnetic resonance and Raman spectroscopies

The reversible protonation of carbon single-walled nanotubes (SWNTs) in sulfuric acid and Nafion was investigated using solid-state nuclear magnetic resonance (NMR) and Raman spectroscopies. Magic-angle spinning (MAS) was used to obtain high-resolution 13C and 1H-13C cross polarization (CP) NMR spectra. The 13C NMR chemical shifts are reported for bulk SWNTs, H2SO4-treated SWNTs, SWNT-Nafion polymer composites, SWNT-AQ55 polymer composites, and SWNTs in contact with water. Protonation occurs without irreversible oxidation of the nanotube substrate via a charge-transfer process. This is the first report of a chemically induced change in a SWNT 13C resonance brought about by a reversible interaction with an acidic proton, providing additional evidence that carbon nanotubes behave as weak bases. Cross polarization was found to be a powerful technique for providing an additional contrast mechanism for studying nanotubes in contact with other chemical species. The CP studies confirmed polarization transfer from nearby protons to nanotube carbon atoms. The CP technique was also applied to investigate water adsorbed on carbon nanotube surfaces. Finally, the degree of bundling of the SWNTs in Nafion films was probed with the 1H-13C CP-MAS technique.