Structure and conformational equilibrium of thiacalix[4]arene by density functional theory

Density functional theory calculations for the structure and conformational equilibrium of thiacalix[4]arene are reported. The conformational equilibrium of thiacalix[4]arene, a heterocalixarene in which the phenol groups are bridged by sulphur atoms is compared to the conformational equilibrium of calix[4]arene. Thiacalix[4]arene conformational energies relative to the cone conformer (ΔE's) are reduced in comparison with calix[4]arene. This conformational change is in qualitative agreement with recent NMR spectroscopy measurements of the conformational equilibrium for a tetraethylether of thiacalix[4]arene in a CDCl₃ solution which indicates an enhanced chemical exchange of thiacalixarene conformers in comparison with similar methylene bridged structures. Density functional theory results for the structure of thiacalix[4]arene are in good agreement with recent X-ray diffraction measurements. The electrostatic potentials in the cone conformers of thiacalix[4]arene and calix[4]arene suggest that their complexation or recognition abilities can be significantly different. Dipole moments of the four thiacalix[4]arene conformers are in the order: cone>1,2-alternate>partial-cone>1,3-alternate.     

Click synthesis and dye extraction properties of novel thiacalix[4]arene derivatives with triazolyl and hydrogen bonding groups

Using a click reaction between alkynylthiacalix[4]arene and ethyl 2-azidoacetate followed by an ammonolysis with ethanolamine,leucinol and hydrazine hydrate,respectively,three novel thiacalix [4]arene derivatives 4,5 and 6 with triazolyl and hydrogen bonding groups(NH and OH) were synthesized in high yields.They exhibited excellent extraction capability for six anionic and cationic dyes.The flexible cavity,π-triazole rings and hydrogen bonding groups all play crucial roles in dye complexation.     

Synthesis and evaluation of a novel pyrenyl-appended triazole-based thiacalix[4]arene as a fluorescent sensor for Ag ion

New fluorescent chemosensors 1,3-alternate-1 and 2 with pyrenyl-appended triazole-based on thiacalix[4]arene were synthesized. The fluorescence spectra changes suggested that chemosensors 1 and 2 are highly selective for Ag⁺ over other metal ions by enhancing the monomer emission of pyrene in neutral solution. However, other heavy metal ions, such as Cu²⁺, and Hg²⁺ quench both the monomer and excimer emission of pyrene acutely. The ¹H NMR results indicated that Ag⁺ can be selectively recognized by the triazole moieties on the receptors 1 and 2 together with the ionophoricity cavity formed by the two inverted benzene rings and sulfur atoms of the thiacalix[4]arene.     

The synthesis of tetracarbonyl derivatives of thiacalix[4]arene in different conformations and their complexation properties towards alkali metal ions

The three conformations of 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis[(benzoyl)methoxy]-2,8,14,20-tetrathiacalix[4]arene 1: cone, partial cone and 1,3-alternate, were prepared by the treatment of 5,11,17,23-tetra-tert-butyl-2,8,14,20-tetrathiacalix[4]arene-25,26,27,28-tetraol (TCA) with α-bromo acetophenone in the presence of appropriate alkali carbonate M₂CO₃ (M=Na, K, Cs) as base catalyst in acetonitrile. Structure of the conformers were established by ¹H NMR, ¹H-¹H COSY, 1D NOE, 2D ROESY and X-ray experiments. The alkali cation binding selectivity of the obtained macrocycles was investigated by the ion-pair extraction method.     

Synthesis and binding studies of novel bisthiacalix[4]arenes with diimime linkages

A series of novel bisthiacalix[4]arenes with diimine linkages of different aromatic or heteroaromatic dialdehydes have been synthesized. The structure of one of the bisthiacalixarene has been analyzed by X-ray crystallography. These molecules quantitatively extract silver ion from aqueous into organic phase under neutral conditions.     

Diazo-coupled calix[4]arenes for qualitative analytical screening of metal ions

New chromogenic diazophenylcalix[4]arenes 1 and 2 were synthesized in cone conformation. Compound 1 with the ortho-carboxyl groups in CH₃CN solution preferentially binds with alkaline earth and transition metal ions, whereas no significant changes in absorption spectra are observed in the presence of alkali metal ions. While 2 with the ortho-ester groups shows selective complexation properties towards transition metal ions over alkali and alkaline earth metal ions. The detection of metal ions gives rise to bathochromic shifts in the absorption spectra (from orange/yellow to red), which is clearly visible even to the naked eye. According to the selective color changes using both receptors upon cation complexation, one can set up a qualitative analytical routine to screen alkali, alkaline earth, and transition metal ions.     

A new colorimetric and fluorescent chemosensor based on thiacalix[4]arene for fluoride ions

A new thiacalix[4]arene based fluorescent chemosensor thiacalix[4]arene-N-(quinolin-8-yl)acetamide (TCAN8QA) has been synthesized. TCAN8QA has been found to exhibit highly selective behavior for F⁻ ions among all other anions, that is, Cl⁻, Br⁻, I⁻, PO₄⁻³, OH⁻, H₂PO₄⁻, and CH₃COO⁻ in the absorption spectra as well as in the emission spectra. Red shift and quenching in emission spectra constituting the signature for fluoride detection are due to photoinduced charge transfer (PCT) which can be attributed to deprotonation of acidic NH proton in the presence of fluoride ions.     

F-Induced ‘turn-on’ fluorescent chemosensor based on 1,3-alt thiacalix[4]arene

A new thiacalix[4]arene based fluorescent sensor 1 bearing two naphthyl groups has been synthesized in 1,3-alternate conformation. In the absence of fluoride ion, the receptor 1 is in ‘off-state’ showing no fluorescence emission. The presence of fluoride ion triggered the fluorescence emission to ‘on-state’. The receptor shows pronounced selectivity for fluoride ions. In THF, the presence of F⁻ ions induces the formation of a 1:1 (G:H) complex.     

Chromatographic molecular recognition for catechol-related compounds using thiacalix[4]arene as an effective selector

Thiacalix[4]arene (5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrahydroxy-2,8,14,20-tetrathiacalix[4]arene) is an amphiphilic molecule comprising four p-tert-butylphenol-like groups ortho-linked by single sulfur atoms. This molecule has a high electron density area owing to the close proximity of the hydroxyl groups and sulfur atoms. We studied the applicability of this interesting compound as a selector for high-performance liquid chromatography (HPLC) thereby presumably exploiting this feature. Firstly, uniformly sized polymer particles were prepared by using a multi-step swelling and polymerization method with ethylene glycol dimethacrylate (EDMA) as a cross-linker. Methacrylic acid (MAA) was introduced onto the surface of the resulting polymer particles through a new modification method. Thiacalix[4]arene was chemically bonded through the MAA group by using 1,4-dibromobutane as a spacer to reduce steric hindrance around the MAA and the polymer particle itself. The performance of the prepared polymer-based thiacalix[4]arene-modified stationary phase was evaluated with HPLC. Specific chromatographic retention behavior was observed for catechol relative to positional isomers of xylene, cresol, and benzene-diol. Catecholamine and catechol showed specific chromatographic retention behavior.     

Unprecedented cyclisations of calix[4]arenes under the Mitsunobu protocol. Part 3: Thiacalix[4]crowns versus dimers

Intermolecular couplings versus intramolecular ring closures were observed in the reaction of p-tert-butylthiacalix[4]arene and diethylene glycols affording dimers 2 and/or the inherently chiral 1,2-thiacalix[4]crown-3 derivatives 5 under the Mitsunobu protocol. The enantiomeric separation of 5a was achieved by chiral HPLC. The reaction of thiacalix[4]monocrowns 1 with diethylene glycols failed to give crowned thiacalix-tubes 7, instead biscrowns 8 were formed. Partially alkylated double thiacalix[4]arenes 10, 11 were obtained via the base promoted alkylations of a thiacalixarene dimer 2a containing diethyleneoxy linkers.     

Chemoselective ring closure of thiacalix[4]arene-1,3-bis(N-ω-hydroxyalkylamides) via the Mitsunobu reaction

Chemoselective intramolecular ring closure on the phenolic OH groups of p-tert-butylthiacalix[4]arene-1,3-bis(N-ω-hydroxyalkylamides) attained under Mitsunobu conditions affords inherently chiral macrocycles capped by carboxamide bridges. Oxazoline or oxazine cyclization products derived from self-condensation of the hydroxyalkylamide moieties were not isolated. In one case the detection of enantiomers was achieved by chiral HPLC.     

A Hexacoordinated P-Bridged Calixarene Derivative -- Phosphorylation of p-tert -Butylthiacalix[4]arene

p-tert -Butylthiacalix[4]arene ( 1 ) reacts with phosphorus pentachloride under participation of the sulfur atoms to a hexacoordinated phosphorus derivative ( 2 ) of the thiacalixarene. Hydrolysis of 2 leads to the twofold 1,2-bridged thiacalixarene bis(chlorophosphate) 3 .     

Structure elucidation of phenoxathiin-based thiacalix[4]arene conformations using NOE and RDC data

Phenoxathiin-based thiacalix[4]arene, obtained by the acid-catalysed rearrangement of the corresponding spirodienone derivative, was immobilized using the alkylation with chloroacetonitrile to yield three (out of four theoretically possible) stereoisomers. As the conformational outcome of the reaction could not be unambiguously assigned using standard NMR techniques, the method of Residual Dipolar Coupling constants (RDCs) was applied. The measuring of an anisotropic through-space dipole-dipole interactions in the lyotropic liquid crystalline alignment medium (PELG, poly-γ-ethyl-l-glutamate, and PBLG, poly-γ-benzyl-l-glutamate) enabled the assignment of the individual conformers. The usefulness of this approach was finally confirmed by the X-ray crystallography data.     

Synthesis and electrochemical behavior of a model redox-active thiacalix[4]arene-tetrathiafulvalene assembly

Syntheses of the first bisthiacalix[4]arenes systems bridged by a tetrathiafulvalene (TTF) framework have been carried out through triethyl phosphite-mediated dechalcogenation dimerization of the corresponding 1,3-dithiole-2-ones. The cyclic voltammograms of the resulting bisthiacalix[4]arenes tethered by an electroactive TTF unit are provided, and exhibit an electrochemical response in the case of introduction of Ag⁺.     

Computational study of calix[4]arene derivatives and complexation with Zn

High level DFT was applied to study structure and conformational equilibrium of amino and mercaptocalix[4]arenes possessing methylene groups or sulfur atoms at their four junctions. All the calculations point to cone and 1,3-alternate as the most stable conformers for sulfur and methylene bridged compounds, respectively. The presence of four sulfur atoms in place of the methylene bridges can lead to novel features in the complexation with transition metals. The host–guest 1:1 complexes between Zn²⁺ and each conformer of tetraaminothiacalix[4]arene were also investigated at the same DFT level. The four nitrogens of amino groups play a dominant role in the interaction with Zn²⁺ via distorted tetrahedral coordination for 1,3-alternate, or distorted square planar for partial cone and 1,2-alternate. On the other hand, the 2:1 complexes with cone show that the sulfur bridges can also bind Zn²⁺ and contribute to form two sets of five-membered chelated rings with two N donor atoms.     

Synthesis and properties of mono-O-[(N-(aminoalkyl)aminocarbonyl)-methoxy]thiacalix[4]arenes and novel mono-O-bridged bisthiacalix[4]arene

A simple method for thiacalix[4]arene O-monoamide preparation with high yields using 5,11,17,23-tetra-tert-butyl-28-(ethoxycarbonyl)methoxy-2,8,14,20-tetrathiacalix[4]arene reaction with diaminoalkanes is reported. The solid state cyclization reaction of the acylethylenediamines function of 5,11,17,23-tetra-tert-butyl-28-O-[(N-(2-aminoethyl)aminocarbonyl)-methoxy]thiacalix[4]arene leading to the formation of the 5,11,17,23-tetra-tert-butyl-28-[2-methoxy-imdazoline]thiacalix[4]arene compound is described for the first time for the calixarene macrocycle family. Finally, preliminary results show that O-mono-amide-thiacalixarene derivatives are promising candidates for the production of self-assembled materials and efficient precursors for the synthesis of bisthiacalix[4] arenes.     

Ethylene polymerization promoted by dinuclear titanium p-tert-butylthiacalix[4]arene complexes

The dinuclear titanium p-tert-butylthiacalix[4]arene complexes 1 and 2 after activation with methylaluminoxane have been tested as homogeneous catalysts for the polymerization of ethylene. The results show that the catalytic activity of 1, although still poor, is higher than those of the related mononuclear titanium complexes bearing calix[4]arene as ligand. The molecular weight of the polyethylene produced are high (M_W up to 1.4 × 10⁶ Dalton) with broad molecular weight distribution. The polyethylenes have high melting point (133-142 °C) indicating a linear polymer microstructure which was confirmed by ¹³C NMR analysis.     

Novel Conductive PANI/Hydrophilic Thiacalix[4]areneNanocomposites: Synthesis,Characterization andInvestigation of Properties简

Nanocomposites of polyaniline(PANI) and the macrocycle thiacalix[4]arene tetra sulfonate(TCAS) were successfully synthesized in feed ratios of 1:0.25, 1:0.50 and 1:0.75 by three prevail synthetic methods, i.e. in situ polymerization, emulsion polymerization and solution casting technique. The structures of the nanocomposites were confirmed by FTIR, UV-Vis, XRD, SEM, and TEM techniques. The conductivity was measured by a four probe method. The conductivity was recorded to be as high as 105 × 10 2S cm 1for the nanocomposite with a nanometer size structure and homogeneously distributed morphology. The electroactivity of the nanocomposites was approved by cyclic voltammetry(CV) and impedance spectroscopy technique(EIS). The antioxidant ability and thermal property of the composites were further studied. Preliminary studies have evidenced the production of conductive nanocomposites with good thermal property and relatively good solubility in N-methyl 2-pyrrolidone(NMP), with the antioxidant activity reaching up to 80%.     

A novel ferrocene-based thiacalix[4]arene ditopic receptor for electrochemical sensing of europium(III) and dihydrogen phosphate ions

We have synthesized a ferrocene-based 1,3-alternate thiacalix[4]arene ditopic receptor 3 that contains four identical polyether arms terminated with the ferrocene amide moieties. Our studies have revealed that this redox-active receptor can be used as an electrochemical sensor to recognize both europium (Eu³⁺) and dihydrogen phosphate ions with a high selectivity.     

Chlorination of Calix[4]arene Derivatives

New convenient method for synthesis of p-chlorinated calix[4]arenes is reported. The sulfuryl chloride was used for chlorination of unsubstituted at the lower rim calix[4]arenes. The products of this reaction were very suitable for further O-alkylation.