Synthesis and characterization of new oxazoline-based palladacycles with bridging or terminal imidate ligands. Crystal structures of [{Pd(μ-dibromomaleimidate)(Phox)}2], [Pd(dibromomaleimidate)(Phox)(PPh3)] and [Pd(glutarimidate)(Phox)(PPh3)] (Phox = 2-(2-oxazolinyl)phenyl))

The dinuclear hydroxo complex [{Pd(μ-OH)(Phox)}₂] (I) (Phox = 2-(2-oxazolinyl)phenyl) reacts in a 1:2 molar ratio with several imidate ligands to yield new cyclometallated palladium complexes [{Pd(μ-NCO)(Phox)}₂] containing asymmetric imidate –NCO– bridging units. [–NCO– = succinimidate (succ) (1), phtalimidate (phtal) (2), maleimidate (mal) (3), 2,3-dibromomaleimidate (2,3-diBrmal) (4) and glutarimidate (glut) (5)]. The reaction of these complexes with tertiary phosphines provides novel mononuclear N-bonded imidate derivatives of the general formula [Pd(imidate)(Phox)(PR₃)] [R = Ph (a), 4-F–C₆H₄ (b) or CH₂CH₂CN (c)]. The new complexes were characterized by partial elemental analyses and spectroscopic methods (IR, FAB, ¹H, ¹³C and ³¹P). The single-crystal structures of compounds 4, 4a and 5a have been established.     

Structural studies of phosphor-1,1-diselenoato Mn(I) and Re(I) complexes

Mononuclear complexes of the type, M(CO)₄[Se₂P(OR)₂] (M = Mn, R = ⁱPr, 1a; Et, 1b; M = Re, R = ⁱPr, 3a; Et, 3b) can be prepared from either [-Se(Se)P(OⁱPr)₂]₂ (A) or [Se{-Se(Se)P(OEt)₂}₂] (B) with M(CO)₅Br. O,O′-dialkyl diselenophosphate ([(RO)₂PSe₂]^-, abbreviated as dsep) ligands generated from A and B act as a chelating ligand in these complexes. Upon refluxing in acetonitrile, these mononuclear complexes yield dinuclear complexes with a general formula of [M₂(CO)₆{Se₂P(OR)₂}₂] (M = Mn, R = ⁱPr, 2a; Et, 2b; M = Re, R = ⁱPr, 4a; Et, 4b). Dsep ligands display a triconnective, bimetallic bonding mode in the dinuclear compounds and this kind of connective pattern has never been identified in any phosphor-1,1-diselenoato metal complexes. Compounds 2b, 3b, and 4 are structurally characterized. Compounds 2b and 3b display weak, secondary Se?Se interactions in their lattices.     

Synthesis and electrochemical properties of bis(bipyridine)ruthenium(II) complexes bearing pyridinyl- and pyridinylidene ligands induced by cyclometalation of N′-methylated bipyridinium analogs

Ruthenium complexes with bipyridine-analogous quaternized (N,C) bidentate ligands [RuL(bpy)₂](PF₆)₂ (bpy = 2,2′-bipyridine, (1), L = L¹ = N′-methyl-2,4′-bipyridinium; (2), L = L² = N′-methyl-2,3′-bipyridinium) were synthesized and characterized. The structure of complex 2 was determined by the X-ray structure analysis. The ¹³C{¹H} NMR spectroscopic and cyclic voltammetric studies indicate that the coordination modes of these ligands are quite different, that is, the C-coordinated rings of (N,C)-ligands in 1 and 2 are linked to ruthenium(II) with a pyridinium manner and a pyridinylidene one, respectively. The ligand-localized redox potentials of 1 and 2 also revealed the substantial difference in the electron donating ability of both ligands.     

Fe Spin crossover materials based on dissymmetrical N4 Schiff bases including 2-pyridyl and 2R-imidazol-4-yl rings: Synthesis,crystal structure and magnetic and Mössbauer properties

The synthesis and characterization of new symmetrical Fe^II complexes, [FeL^A(NCS)₂] (1), and [FeL^Bx(NCS)₂] (2–4), are reported (L^A is the tetradentate Schiff base N,N′-bis(1-pyridin-2-ylethylidene)-2,2-dimethylpropane-1,3-diamine, and L^Bx stands for the family of tetradentate Schiff bases N,N′-bis[(2-R-1H-imidazol-4-yl)methylene]-2,2-dimethylpropane-1,3-diamine, with: R = H for L^B1 in 2, R = Me for L^B2 in 3, and R = Ph for L^B3 in 4). Single-crystal X-ray structures have been determined for 1 (low-spin state at 293 K), 2 (high-spin (HS) state at 200 K), and 3 (HS state at 180 K). These complexes remain in the same spin-state over the whole temperature range [80–400 K]. The dissymmetrical tetradentate Schiff base ligands L^Cx, N-[(2-R₂-1H-imidazol-4-yl)methylene]-N′-(1-pyridin-2-ylethylidene)-2,2-R₁-propane-1,3-diamine (R₁ = H, Me; R₂ = H, Me, Ph), containing both pyridine and imidazole rings were obtained as their [FeL^Cx(NCS)₂] complexes, 5–10, through reaction of the isolated aminal type ligands 2-methyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = H, 5–7) or 2,5,5-trimethyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = Me, 8–10) with imidazole-4-carboxaldehyde (R₂ = H: 5, 8), 2-methylimidazole-4-carboxaldehyde (R₂ = Me: 6, 9), and 2-phenyl-imidazole-4-carboxaldehyde (R₂ = Ph: 7, 10) in the presence of iron(II) thiocyanate. Together with the single-crystal X-ray structures of 7 and 9, variable-temperature magnetic susceptibility and Mössbauer studies of 5–10 showed that it is possible to tune the spin crossover properties in the [FeL^Cx(NCS)₂] series by changing the 2-imidazole and/or C2-propylene susbtituent of L^Cx.     

The sterically hindered salicylaldimine ligands with their copper(II) metal complexes: Synthesis,spectroscopy, electrochemical and thin-layer spectroelectrochemical features

The synthesis, structure, spectroscopic and electro-spectrochemical properties of sterically constrained Schiff-base ligands (L_nH) (n = 1, 2, and 3) (L = N-[m-(methylmercapto)aniline]-3,5-di-t-butylsalicylaldimine, m = 4, 3, and 2 positions, respectively) and their copper(II) complexes [Cu(L_n)₂] are described. Three new dissymmetric bidentate salicylaldimine ligands containing a donor set of ONNO were prepared by reaction of different primary amine with 3,5-di-t-butyl-2-hydroxybenzaldehyde (3,5-DTB). The copper(II) metal complexes of these ligands were synthesized by treating an methanolic solution of the appropriate ligand with an equimolar amount of Cu(Ac)₂ · H₂O. The ligands and their copper complexes were characterized by FT-IR, UV–Vis, ¹H and ¹³C NMR and elemental analysis methods in addition to magnetic susceptibility, molar conductivity, and spectroelectrochemical techniques. Analytical data reveal that copper(II) metal complexes possess 1:2 metal–ligand ratios. On the basis of molar conductance, the copper(II) metal complexes could be formulated as [Cu(L_n)₂] due to their non-electrolytic nature in dimethylforamide (DMF). The room temperature magnetic moments of [Cu(L_n)₂] complexes are in the range of 1.82–1.90 B.M which are typical for mononuclear of Cu(II) compounds with a S = 1/2 spin state. The complexes did not indicate antiferromagnetic coupling of spin at this temperature. Electrochemical and thin-layer spectroelectrochemical studies of the ligands and complexes were comparatively studied in the same experimental conditions. The results revealed that all ligands displayed irreversible reduction processes and the cathodic peak potential values of (L₃H) are shifted towards negative potential values compared to those of (L₁H) and (L₂H). It is attributed to the weak-electron-donating methyl sulfanyl group substituted on the ortho (m = 2) position of benzene ring. Additionally, all copper complexes showed one quasi-reversible one-electron reduction process in the scan rates of 0.025–0.50 V s⁻¹, which are assigned to simple metal-based one-electron processes; [Cu(2+)(L_n)₂] + e⁻ → [Cu(1+)(L_n)₂]⁻. The spectral changes corresponding to the ligands and complexes during the applied potential in a thin-layer cell confirmed the ligand and metal-based reduction processes, respectively.     

Mononuclear Cu and dinuclear Cu–Ln complexes of benzimidazole based ligands including N and O donors: Syntheses,characterization, X-ray molecular structures and magnetic properties

The synthesis of two mononuclear precursor copper complexes, [(HL²)₂Cu], 1, and [(HL³)₂Cu]·H₂O, 2, and three dinuclear Cu–Ln complexes, [(HL¹)₂Cu(CH₃CN)₂Gd(NO₃)₃], 3, [(HL³)₂CuGd(NO₃)₃]·2(H₂O), 4, and [(HL³)₂CuTb(NO₃)₃]·2(H₂O), 5, based on the ligands H₂L¹ (4-bromo-2-[1-(5-bromo-2-hydroxy-3-methoxybenzyl)-1H-benzimidazol-2-yl]-6-methoxyphenol), H₂L² (2-(1H-benzimidazol-2-yl)-4-bromo-6-methoxyphenol) and H₂L³ (2-(1H-benzimidazol-2-yl)-6-methoxyphenol) are described in this contribution. The X-ray crystal structures of H₂L², 1, 3, 4, and 5 have been solved. The novel ligand H₂L² crystallizes with two independent molecules in the asymmetric unit; several intermolecular hydrogen contacts connect alternate independent H₂L² molecules into chains developing along c. In complex 1, two (HL²)⁻ ligands chelate the copper ion through their imidazolyl nitrogen and phenoxo oxygen atoms, in a relative head to tail arrangement. The molecular structure of 3 is similar to those of the previously reported Cu–Ln complexes of H₂L¹. In the isostructural complexes 4 and 5, two HL³ ligands sandwich one Cu²⁺ ion through their N,O sites and one Ln³⁺ ion through their O₂ site, implying a relative head to head arrangement, at variance with the relative head to tail arrangement of HL² in the mononuclear copper precursor 1. The magnetic properties of 1, 3, 4, and 5 have been investigated. Extended intermolecular antiferromagnetic interactions operate in complex 1 ((J_Chain = −0.8(1) cm⁻¹). Ferromagnetic interactions between Gd (S = 7/2) and Cu (S = 1/2) centers operate in complexes 3 and 4, leading to an S = 4 ground state (J_CuGd = 7.2(2) cm⁻¹ for 3 and J_CuGd = 6.5(2) cm⁻¹ for 4). Depopulation of the Tb Stark levels, preclude obtaining reliable information on the presence and sign of the Cu–Tb interaction in 5. These new complexes are complementary to those previously reported: the Cu–O₂–Gd core is planar while deformations are borne by the ligands at variance with previous examples where the constraints were located at the Cu–O₂–Gd core. The presence of two independent ligands in the Cu,Gd coordination spheres confers a degree of freedom greater than that allowed by a unique tetradentate ligand. As a result, the strength of the magnetic interaction is not solely related to the dihedral angle between the CuOO and GdOO planes in the central core.     

Rhenium(IV)–copper(II) heterobimetallic complexes: Synthesis,crystal structure and magnetic properties

Two Re(IV)–Cu(II) heterometallic complexes {(CuL_α)[ReCl₄(ox)]}_n (where L_α = N-meso-5,12-Me₂-7,14-Et₂-[14]-4,11-dieneN₄), 1, and (CuL_β)[ReCl₄(ox)] (L_β = N-rac-5,12-Me₂-7,14-Et₂-[14]-4,11-dieneN₄N-rac-5,12-Me₂-7,14-Et₂-[14]-4,11-dieneN₄), 2, were synthesized. The [CuL²⁺] macrocyclic cation is coordinated from above and below by [ReCl₄(ox)]²⁻ units through the chloro-ligands and creates a chloro-bridged heterometallic Re^IV–Cu^II one-dimensional zig-zag chain. Compound 2 can be viewed as a heterobimetallic dinuclear unit, in which the Re(IV)-Cu(II) centers are linked by an oxalato bridge. The magnetic behavior of 1 and 2 has been investigated over the temperature range 1.8–300 K. Compound 1 behaves like a ferrimagnetic {Re(IV)–Cu(II)} bimetallic, one-dimensional chain with intrachain antiferromagnetic coupling. Compound 2 shows a weak antiferromagnetic interaction within the [Re(IV)–Cu(II)] unit along with a strong single-ion anisotropy, D(Re) = −63 cm⁻¹.     

Photophysical properties and computational investigations of tricarbonylrhenium(I)[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]L and tricarbonylrhenium(I)[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]L derivatives (X = N-CH3, O, or S; L = Cl, pyridine)

We report a combined experimental and computational study of new rhenium tricarbonyl complexes based on the bidentate heterocyclic N-N ligands 2-(4-methylpyridin-2-yl)benzo[d]-X-azole (X = N-CH₃, O, or S) and 2-(benzo[d]-X-azol-2-yl)-4-methylquinoline (X = N-CH₃, O, or S). Two sets of complexes are reported. Chloro complexes, described by the general formula Re(CO)₃[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]Cl (X = N-CH₃, 1; X = O, 2; X = S, 3) and Re(CO)₃[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]Cl (X = N-CH₃, 4; X = O, 5; X = S, 6) were synthesized heating at reflux Re(CO)₅Cl with the appropriate N-N ligand in toluene. The corresponding pyridine set {Re(CO)₃[2-(4-methylpyridin-2-yl)benzo-X-azole]py}PF₆ (X = N-CH₃, 7; X = O, 8; X = S, 9) and {Re(CO)₃[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]py}PF₆ (X = N-CH₃, 10; X = O, 11; X = S, 12) was synthesized by halide abstraction with silver nitrate of 1-6 followed by heating in pyridine and isolated as their hexafluorophosphate salts. All complexes have been fully characterized by IR, NMR, electrochemical techniques and luminescence. The crystal structures of 1 and 7 were obtained by X-ray diffraction. DFT and time-dependent (TD) DFT calculations were carried out for investigating the effect of the organic ligand on the optical properties and electronic structure of the reported complexes.     

Conversion of novel palladacycles into oxopyrrolo[3,4-b]quinolines

The quinolinylcyclopalladated complexes 3a–b were synthesised in good yields (81% and 77%) by the insertion reaction of the prepared dinuclear palladium complexes [Pd(C,N-2-C₉H₄N-CHO-3-R-6)Cl(PPh₃)]₂ [(R = H (2a), R = OMe (2b)] with isonitrile XyNC (Xy = 2,6-Me₂C₆H₃). The cyclopalladated complexes 3a–b were also obtained in low yields (39% and 33.5%) via a one pot oxidative addition reaction of quinoline chloride 1a–b with isonitrile XyNC:Pd(dba)₂ (4:1). The reactions of 3a–b with Tl(TfO) (TfO = triflate, CF₃SO₃) in the presence of H₂O or EtOH causes depalladation reactions of the complexes to provide the corresponding organic compounds 4a–b, 5a–b and 6a–b in yields (41%, 27% and 18–19%). The products were characterized by satisfactory elemental analyses and spectral studies (IR, ¹H, ¹³C and ³¹P NMR). The crystal structures of 2a, 3a and 3b were determined by X-ray diffraction studies.     

Ion-pair charge transfer complexes with intense near IR absorption: Syntheses,crystal structures,electronic spectra and DFT calculations

Five ion-pair complexes, consisting of R-benzylidene-1-aminopyridinium derivatives and [Ni(mnt)₂]²⁻ (R = p-nitro (1), p-methyl (2), p-bromo (3), p-chloro (4) and m-nitro (5); mnt²⁻ = maleonitriledithiolate), were synthesized and structurally characterized. As for 1, it is interesting to observe a large deviation from square-planar coordination geometry for the Ni atom, while no deviation is observed in the other four complexes. In the solid state, UV–Vis–NIR spectra of 2–5 show similar properties with intense absorption in the 200–750 nm and moderate near IR absorption in the 750–1000 nm region, whereas 1 exhibits an intense absorption from UV/Visible to near-IR region (200–1100 nm). This unique spectral feature of 1 is attributed to its distinctive structural differences from 2 to 5, namely the strong intermolecular packing interactions between anions and cations, as well as a significant deviation from the planarity of the anion. Based on DFT and TDDFT calculations, near-IR absorbance bands in 1–5 were assigned to combined transitions of d–d, MLCT and π–π^∗ in the [Ni(mnt)₂]²⁻ anion as well as the ion-pair charge transfer (IPCT) from the anionic HOMO to the cationic LUMO. The IPCT band position in acetonitrile is independent of the substituent group feature in benzene ring of cations for 1–5, which could be interpreted that the substituent group in benzene ring only has a minor contribution to the cationic LUMO.     

Palladium and half sandwich ruthenium(II) complexes of selenated and tellurated benzotriazoles: Synthesis, structural aspects and catalytic applications

1-(Phenylselenomethyl)-1H-benzotriazole (L¹) and 1-(4-methoxyphenyltelluromethyl)-1H-benzotriazole (L²) have been synthesized by reacting 1-(chloromethyl)-1H-benzotriazole with in situ generated nucleophiles PhSe⁻ and ArTe⁻, respectively. The complexes of L¹ and L² with Pd(II) and Ru(II)(η⁶-p-cymene) have been synthesized. Proton, carbon-13, Se-77 and/or Te-125 NMR spectra authenticate both the ligands and their complexes. The single crystal structures of L¹, L² and [RuCl(η⁶-p-cymene)(L)][PF₆] (L = L¹: 3, L = L²: 4) have been solved. The Ru-Se and Ru-Te bond lengths have been found 2.4801(11) and 2.6183(10) Å, respectively. The palladium complexes, [PdCl₂(L)] (L = L¹: 1, L = L²: 2) have been explored for Heck and Suzuki-Miyaura C-C coupling reactions. The TON values are upto 95,000. The Ru-complexes have been found promising for catalytic oxidation of alcohols (TON ∼ 7.8-9.4 × 10⁴). The complexes of telluroether ligands are as efficient catalysts as those of selenoether ones and in fact better for catalytic oxidation.     

Infinite chains constructed from flexible bis(benzimidazole)-based ligands

Two neutral ligands, L¹ · 2H₂O and L² · H₂O, and seven complexes, [Cu(pmb)₂(L¹)] (1), [Cu(pmb)₂(L²)] (2), [Cu(Ac)₂(L²)] · 4H₂O (3), [Cu(4-aba)₂(L²)] (4), [Ag(4-ts)(L¹)(H₂O)] (5), [Ag₂(epes)₂(L¹)] · 2H₂O (6), [Ag(1,5-nds)_0.5(L²)] · 0.5C₂H₅OH · H₂O (7) [where L¹ = 1,1′-(1,4-butanediyl)bis(2-methylbenzimidazole); L² = 1,1′-(1,4-butanediyl)bis(2-ethylbenzimidazole), pmb = p-methoxybenzoate anion; Ac = acetate anion; 4-aba = 4-aminobenzoate anion; 4-ts = p-toluenesulfonate anion; epes = N-(2-hydroxyethyl)piperazine-N′-(2-ethanesulfonate) anion; 1,5-nds = 1,5-naphthalenedisulfonate anion], have been synthesized and characterized by elemental analysis, IR, and single-crystal X-ray diffraction. The L¹ and L² ligands in compounds 1–7 act as bridging ligands, linking metal ions into chain structures. The chains in compounds 3, 4 and 6 interlace with each other by hydrogen bonds to generate 3D supramolecular structures. In compound 5, π–π interactions between adjacent L¹ ligands hold the chains to a supramolecular layer. In compound 7, the sulfonate anions act as counterions in the framework. The thermal stabilities of 3, 6 and 7, and the luminescent properties for 5–7 in the solid states are also discussed.     

Cobalt complexes of terpyridine ligands: Crystal structure and nuclease activity

Cobalt(II) (1) and cobalt(III) (2) complexes of tridentate ligand, imidazole terpyridine (Itpy), have been synthesized and characterized by both spectroscopic and electrochemical techniques. Single crystal X-ray diffraction studies of complexes 1 and 2 shows that the complexes belong to monoclinic crystal system, with the two Itpy ligands coordinated to the central metal ion. The binding behavior of both the cobalt complexes to calf thymus DNA has been investigated by UV–Vis, fluorescence spectroscopy, viscosity and electrochemical measurements. The results suggest that complexes 1 and 2 bind to DNA through intercalation. The intrinsic DNA binding constant values obtained from absorption spectral titration studies were found to be (5.07 ± 0.12) × 10³ M⁻¹ and (7.46 ± 0.16) × 10³ M⁻¹, respectively, for complexes 1 and 2. Gel electrophoresis studies with the cobalt complexes show that while complex 1 cleaves DNA in the presence of hydrogen peroxide, complex 2 cleaves DNA in the presence of ascorbic acid and hydrogen peroxide.     

Axial and equatorial carbene ligands of dimanganese and dirhenium monocarbene complexes: Synthesis, characterisation and structural studies

The binuclear alkoxycarbene complexes [M₂(CO)₉{C(OEt)C₄H₃Y}] (M = Mn, Y = S(1), O(2); Re, Y = S(3), O(4)) were synthesised and characterised, giving axial carbene ligands for the dimanganese complexes, and equatorial carbene ligands for the dirhenium complexes. Aminolysis of these complexes with ammonia and n-propylamine yielded complexes [M₂(CO)₉{C(NHR)C₄H₃Y}] (R = H, M = Mn, Y = S(5), O(6); Re, Y = S(7), O(8); R = propyl, M = Mn, Y = S(9), O(10); Re, Y = S(11), O(12)). For the smaller NH₂-substituted carbene ligands, the X-ray structures determined showed equatorial carbene ligands for both dimanganese and dirhenium complexes, while the NHPr-substituted carbene complexes retained the original configurations of the precursor alkoxy carbene complex, indicating that the steric effects of both the M(CO)₅-fragment and the carbene ligand substituent can affect the coordination site of the carbene ligands of Group VII transition metal complexes in the solid state.     

Preparation and cis-to-trans transformation study of square-planar [Pt(Ln)2Cl2] complexes bearing cytokinins derived from 6-benzylaminopurine (Ln) by view of NMR spectroscopy and X-ray crystallography

Mononuclear, square-planar platinum(II) complexes involving derivatives of aromatic cytokinins as the ligands, and having the general formula cis-[Pt(L_n)₂Cl₂] (1–3) and trans-[Pt(L_n)₂Cl₂] (4–6), where n = 1–3, L₁ = 2-chloro-6-(benzylamino)-9-isopropylpurine, L₂ = 2-chloro-6-[(4-methoxybenzyl)amino]-9-isopropylpurine and L₃ = 2-chloro-6-[(2-methoxybenzyl)-amino]-9-isopropylpurine, have been synthesized and characterized by elemental analysis, MALDI-TOF mass, FT IR, ¹H, ¹³C, ¹⁵N and ¹⁹⁵Pt NMR spectral measurements. Dynamic cis-to-trans isomerization process of complex 1 in N,N′-dimethylformamide (DMF) has been investigated by means of multinuclear NMR spectroscopy. The solid-state structures of 1, 4 · (DMF)₂, and 5 have been determined by single crystal X-ray analysis. X-ray structures revealed that the heterocyclic ligands are coordinated to platinum via nitrogen atom N(7) in all the complexes studied. In vitro cytotoxicity of the prepared complexes against MCF7, G361, K562, and HOS has been evaluated. Owing to low solubility of the complexes in water, the cytotoxicity has been only tested up to 5 μM concentration. Unfortunately, all complexes have been found to be non-cytotoxic in the accessible concentration range.     

Synthesis and characterization of water-soluble palladium(II)-functionalized diphosphine complexes

Water-soluble functionalized bis(phosphine) ligands L (a–h) of the general formula CH₂(CH₂PR₂)₂, where for a: R = (CH₂)₆OH; b–g: R = (CH₂)_nP(O)(OEt)₂, n = 2–6 and n = 8; h: R = (CH₂)₃NH₂ ( Scheme 1), have been prepared photochemically by hydrophosphination of the corresponding 1-alkenes with H₂P(CH₂)₃PH₂. Water-soluble palladium complexes cis-[Pd(L)(OAc)₂] (1–8) were obtained by the reaction of Pd(OAc)₂ with the ligands a–h in a 1:1 mixture of dichloromethane:acetonitrile. The water-soluble phosphine ligands and their palladium complexes were characterized by IR, ¹H and ³¹P NMR. A crystallographic study of complex 1 shows that the Pd(II) ion has a square planar coordination sphere in which the acetate ligands and the diphosphine ligand deviate by less than 0.12 Å from ideal planar.     

Reactivity of [Re2(CO)8(MeCN)2] with thiazoles: Hydrido bridged dirhenium compounds bearing thiazoles in different coordination modes

Reactions of the labile compound [Re₂(CO)₈(MeCN)₂] with thiazole and 4-methylthiazole in refluxing benzene afforded the new compounds [Re₂(CO)₇{μ-2,3-η²-C₃H(R)NS}{η¹-NC₃H₂(4-R)S}(μ-H)] (1, R = H; 2, R = CH₃), [Re₂(CO)₆{μ-2,3-η²-C₃H(R)NS}{η¹-NC₃H₂(4-R)S}₂(μ-H)] (3, R = H; 4, R = CH₃) and fac-[Re(CO)₃(Cl){η¹-NC₃H₂(4-R)S}₂] (5, R = H; 6, R = CH₃). Compounds 1 and 2 contain two rhenium atoms, one bridging thiazolide ligand, coordinated through the C(2) and N atoms and a η¹-thiazole ligand coordinated through the nitrogen atom to the same Re as the thiazolide nitrogen. Compounds 3 and 4 contain a Re₂(CO)₆ group with one bridging thiazolide ligand coordinated through the C(2) and N atoms and two N-coordinated η¹-thiazole ligands, each coordinated to one Re atom. A hydride ligand, formed by oxidative-addition of C(2)-H bond of the ligand, bridges Re-Re bond opposite the thiazolide ligand in compounds 1-4. Compound 5 contains a single rhenium atom with three carbonyl ligands, two N-coordinated η¹-thiazole ligands and a terminal Cl ligand. Treatment of both 1 and 2 with 5 equiv. of thiazole and 4-methylthiazole in the presence of Me₃NO in refluxing benzene afforded 3 and 4, respectively. Further activation of the coordinated η¹-thiazole ligands in 1-4 is, however, unsuccessful and results only nonspecific decomposition. The single-crystal XRD structures of 1-5 are reported.     

Synthesis,photophysical and nonlinear optical properties of microwave synthesized 4-tetra and octa-substituted lead phthalocyanines

This work presents the photophysical and nonlinear optical behaviour of newly synthesized complexes: 2,(3)-tetrakis(4-benzyloxyphenoxyphthalocyaninato) lead (5a) and 2,3-octakis(4-benzyloxyphenoxyphthalocyaninato) lead (6a). The nonlinear optical behaviour of complexes 5a and 6a are compared with those of 2,(3)-tetraphenoxyphthalocyaninato lead (5b), 2,(3)-tetrakis(4-t-butylphenoxyphthalocyaninato) lead (5c), 2,3-octaphenoxyphthalocyaninato lead (6b) and 2,3-octakis(4-t-butylphenoxyphthalocyaninato) lead (6c). The synthesis of 5a and 6a was performed using microwave irradiation. Photophysical properties were studied for these complexes in dimethylsulfoxide, dimethylformamide, toluene, tetrahydrofuran and chloroform. The fluorescence spectra were different from excitation spectra due to demetallation upon excitation. High triplet quantum yields ranging from 0.80 to 0.86 (in DMSO, DMF and toluene) and low triplet lifetimes (20–50 μs in DMSO, and <10 μs in the rest of the solvents) were observed due to the presence of heavy atom. Nonlinear optical properties were studied in dimethylsulfoxide. The optical limiting threshold intensity (I_lim) for the PbPc derivatives were calculated and ranged from 2.1 to 6.6 W/cm².     

Structural diversity in Cu(II), Cd(II) and Hg(II) coordination complexes with the rigid N,N′-bis(2/3-aryl)-1,4-benzenedicarboxamide ligand

The syntheses and structures of a series of metal complexes, namely Cu₂Cl₄(L¹)(DMSO)₂·2DMSO (L¹ = N,N′-bis(2-pyridinyl)-1,4-benzenedicarboxamide), 1; {[Cu(L²)_1.5(DMF)₂][ClO₄]₂·3DMF}_∞ (L² = N,N′-bis(3-pyridinyl)-1,4-benzenedicarboxamide), 2; {[Cd(NO₃)₂(L³)]·2DMF}_∞ (L³ = N,N′-bis-(2-pyrimidinyl)-1,4-benzenedicarboxamide), 3; {[HgBr₂(L³)]·H₂O}_∞, 4, and {[Na(L³)₂][Hg₂X₅]·2DMF}_∞ (X = Br, 5; I, 6) are reported. All the complexes have been characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. Complex 1 is dinuclear and the molecules are interlinked through S?S interactions. In 2, the Cu(II) ions are linked through the L² ligands to form 1-D ladder-like chains with 60-membered metallocycles, whereas complexes 3 and 4 form 1-D zigzag chains. In complexes 5 and 6, the Na(I) ions are linked by the L³ ligands to form 2-D layer structures in which the [Hg₂X₅]⁻ anions are in the cavities. The L² ligand acts only as a bridging ligand, while L¹ and L³ show both chelating and bridging bonding modes. The L¹ ligand in 1 adopts a trans-anti conformation and the L² ligand in 2 adopts both the cis-syn and trans-anti conformations, whereas the L³ ligands in 3–6 adopt the trans conformation.