Ruthenium complexes of aminophosphine ligands and their use as pre-catalysts in the transfer hydrogenation of aromatic ketones: X-ray crystal structure of thiophene-2-(N-diphenylthiophosphino)methylamine

Reaction of thiophene-2-methylamine with one or two equivalents of PPh₂Cl in the presence of NEt₃, proceeds in thf to give thiophene-2-(N-diphenylphosphino)methylamine, 1a and thiophene-2-(N,N-bis(diphenylphosphino))methylamine, 2a respectively, under anaerobic conditions. Oxidations of 1a and 2a with aqueous hydrogen peroxide, elemental sulfur or gray selenium in thf gives the corresponding oxides, sulfides and selenides [Ph₂P(E)NHCH₂-C₄H₃S] (E: O 1b, S 1c, Se 1d) and [(Ph₂P(E))₂NCH₂-C₄H₃S], (E: O 2b, S 2c, Se 2d) respectively, in high yield. Furthermore, two novel Ru(II) complexes with the P-N ligands 1a and 2a were synthesized starting with the complex [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂. The complexes were fully characterized by analytical and spectroscopic methods. ³¹P-{¹H} NMR, DEPT, ¹H-¹³C HETCOR or ¹H-¹H COSY correlation experiments were used to confirm the spectral assignments. The molecular structure of thiophene-2-(N-diphenylthiophosphino)methylamine was also elucidated by single-crystal X-ray crystallography. Following activation by NaOH, compounds 3 and 4 catalyze the transfer hydrogenation of acetophenone derivatives to 1-phenylethanol derivatives in the presence of iso-PrOH as the hydrogen source. [Ru(Ph₂PNHCH₂-C₄H₃S)(η⁶-p-cymene)Cl₂], 3 and [Ru((PPh₂)₂NCH₂-C₄H₃S)(η⁶-p-cymene)Cl]Cl, 4 complexes are suitable catalyst precursors for the transfer hydrogenation of acetophenone derivatives in 0.1 M iso-PrOH solution. Notably 4 acts as an excellent catalyst giving the corresponding alcohols in excellent conversions up to 99% (TOF ? 744 h⁻¹). This transfer hydrogenation is characterized by low reversibility under the experimental conditions.     

Cationic and neutral ruthenium(II) complexes containing both arene or Cp* and functionalized aminophosphines. Application to hydrogenation of aromatic ketones

Hydrogen transfer reduction processes are attracting increasing interest from synthetic chemists in view of their operational simplicity. For this aim, a series of novel Ru(II) complexes with the P-N-P ligands were synthesized starting from the complex [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂ or [RuCp*Cl(COD)]. The complexes were fully characterized by analytical and spectroscopic methods. ³¹P-{¹H} NMR, DEPT, ¹H-¹³C HETCOR or ¹H-¹H COSY correlation experiments were used to confirm the spectral assignments. Complexes 5, 6 and 7 catalyze the transfer hydrogenation of acetophenone derivatives to 1-phenylethanol derivatives in the presence of iso-PrOH as the hydrogen source. Catalytic studies showed that all complexes are excellent catalytic precursors for the transfer hydrogenation of acetophenone derivatives in 0.1 M iso-PrOH solution. Notably 5 acts as an excellent catalyst giving the corresponding alcohols in excellent conversions up to 99% (TOF ≤ 492 h⁻¹).     

Novel half‐sandwich η5‐Cp *–rhodium(III) and η5‐Cp *–ruthenium(II) complexes bearing bis(phosphino)amine ligands and their use in the transfer hydrogenation of aromatic ketones

Two new half‐sandwich η⁵‐Cp*–rhodium(III) and η⁵‐Cp*–ruthenium(II) complexes have been prepared from corresponding bis(phosphino)amine ligands, thiophene‐2‐(N,N‐bis(diphenylphosphino)methylamine) or furfuryl‐2‐(N,N‐bis(diphenylphosphino)amine). Structures of the new complexes have been elucidated by multinuclear one‐ and two‐dimensional NMR spectroscopy, elemental analysis and IR spectroscopy. These Cp*–rhodium(III) and Cp*‐ruthenium(II) complexes bearing bis(phosphino)amine ligands were successfully applied to transfer hydrogenation of various ketones by 2‐propanol. Copyright © 2013 John Wiley & Sons, Ltd.     

Binuclear ruthenium(II) pyridazine complex catalyzed transfer hydrogenation of ketones

A convenient and general method of synthesis of binuclear ruthenium(II) pyridazine complex was reported. The synthesized complex was characterized by analytical and spectral methods. The structure of the complex was confirmed by X-ray diffraction technique and was found to be an efficient catalyst for the transfer hydrogenation of ketones with excellent conversions in the presence of isopropanol/KOH at 82 °C. The effect of solvents, bases, and different catalyst/substrate ratio for the reaction was also investigated.     

New active ruthenium(II) complexes based N3,N3′-bis(diphenylphosphino)-2,2′-bipyridine-3,3′-diamine and P,P′-diphenylphosphinous acid-P,P′-[2,2′-bipyridine]-3,3′-diyl ester ligands for transfer hydrogenation of aromatic ketones by propan-2-ol

The dimeric starting material [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂ reacts with N3,N3′-bis(diphenylphosphino)-2,2′-bipyridine-3,3′-diamine, 1 and P,P′-diphenylphosphinous acid-P,P′-[2,2′-bipyridine]-3,3′-diyl ester, 2 ligands to afford bridged dinuclear complexes [C₁₀H₆N₂{NHPPh₂-Ru(η⁶-p-cymene)Cl₂}₂], 3 and [C₁₀H₆N₂{OPPh₂-Ru(η⁶-p-cymene)Cl₂}₂], 4 in quantitative yields. These bis(aminophosphine) and bis(phosphinite) based Ru(II) complexes serve as active catalyst precursors for the transfer hydrogenation of acetophenone derivatives in 2-propanol and especially 4 acts as a good catalyst, giving the corresponding alcohols in 99% yield in 20 min (TOF ? 280 h⁻¹).     

Ruthenium(II) pincer complexes with oxazoline arms for efficient transfer hydrogenation reactions

Well-defined P^NN^CN pincer ruthenium complexes bearing both strong phosphine and weak oxazoline donors were developed. These easily accessible complexes exhibit significantly better catalytic activity in transfer hydrogenation of ketones compared to their PN³P analogs. These reactions proceed under mild and base-free conditions via protonation-deprotonation of the ‘NH’ group in the aromatization-dearomatization process.     

Synthesis and properties of novel fluorinated polynaphthalimides derived from 1,4,5,8-naphthalenetetracarboxylic dianhydride and trifluoromethyl-substituted aromatic bis(ether amine)s

A series of novel fluorinated polynaphthalimides (PNIs) (2a-g) were synthesized from 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTDA) and trifluoromethyl (CF₃)-substituted aromatic bis(ether amine)s (1a-g) by high-temperature solution polycondensation in m-cresol using isoquinoline as catalyst. Almost all the PNIs were readily soluble in polar solvents such as N-methyl-2-pyrrolidone (NMP) and N,N-dimethylacetamide (DMAc) and could be solution-cast to transparent and tough films with high tensile strengths. The PNIs exhibited high thermal stability, with glass-transition temperatures of 262-383 °C, 10% weight loss temperatures above 528 °C in nitrogen or air, and char yields at 800 °C in nitrogen higher than 50%. In comparison with analogous PNIs without the -CF₃ substituents, these fluorinated PNIs revealed an enhanced solubility and better film-forming capability.     

Synthesis and characterization of tris{2-(N,N-bis(diphenylphosphino) aminoethyl} amine derivatives: Application of a palladium(II) complex as a pre-catalyst in the Heck and Suzuki cross-coupling reactions

The polydendate bis(phosphino)amine, tris{2-(N,N-bis(diphenylphosphino)aminoethyl}amine 1 has been prepared in a single step from the reaction of tris(2-aminoethyl)amine with six equivalents of PPh₂Cl in the presence of NEt₃ in THF. Oxidation of 1 with aqueous H₂O₂, elemental sulfur or grey selenium gave the corresponding oxide, sulfide or selenide derivatives. [{(P(E)Ph₂)₂NCH₂CH₂}₃N] (E: 2a O, 2b S, 2c Se), respectively. Reaction of [{(PPh₂)₂NCH₂CH₂}₃N] with 3 equiv. of PdCl₂(cod) or PtCl₂(cod) gave the corresponding chelate complexes, [Pd₃Cl₆1] or [Pt₃Cl₆1]. The new compounds were fully characterized by NMR, IR spectroscopy and elemental analysis. The catalytic activity of the Pd(II) complex was tested in the Suzuki coupling and Heck reactions. The Pd(II) complex catalyzed the Suzuki coupling and Heck reaction affording biphenyls and stilbenes, respectively, in high yields.     

Transition metal chemistry of phosphorus based ligands. Ruthenium(II) chemistry of bis(phosphino)amines, X2PN(R)PX2 (R=H or Ph, X=Ph; R=Ph, X2=O2C6H4)

Reactions of CpRuCl(PPh₃)₂ with bis(phosphino)amines, X₂PN(R)PX₂ (1 R=H, X=Ph; 2 R=X=Ph; 3 R=Ph, X₂=O₂C₆H₄) give neutral or cationic mononuclear complexes depending on the reaction conditions. Reaction of 1 with CpRuCl(PPh₃)₂ gives one neutral complex, [CpRu(Cl)(η²-Ph₂PN(H)PPh₂)] (4) and two cationic complexes, [CpRu(η²-Ph₂PN(H)PPh₂)(η¹-Ph₂PN(H)PPh₂)]Cl (5) and [CpRu(PPh₃)(η²-Ph₂PN(H)PPh₂)]Cl (6), whereas the reaction of 2 with CpRuCl(PPh₃)₂ leads only to the isolation of cationic complex, [CpRu(PPh₃)(η²-Ph₂PN(Ph)PPh₂)]Cl (7). The catechol derivative 3, in a similar reaction, affords an interesting mononuclear complex [CpRu(PPh₃){η¹-(C₆H₄O₂)PN(Ph)P(O₂H₄C₆)}₂]Cl (8) containing two monodentate bis(phosphino)amine ligands. The structural elucidation of the complexes was carried out by elemental analyses, IR and NMR spectroscopic data.     

Ruthenium(II) complex catalysts bearing a pyridyl-supported pyrazolyl-imine ligand for transfer hydrogenation of ketones

A new class of hemilabile unsymmetrical 2-(1-arylimino)-6-(pyzazol-1-yl)pyridine ligands and their ruthenium(II) and nickel(II) NNN complexes were synthesized. The Ru(II) complex catalysts have been fully characterized and exhibited good to excellent catalytic activity in the transfer hydrogenation (TH) of ketones in refluxing 2-propanol. These results have demonstrated rare examples of active ruthenium(II) NNN complex catalysts that do not feature a N-H functionality for TH of ketones.     

Ruthenium(III) complexes of amine-bis(phenolate) ligands as catalysts for transfer hydrogenation of ketones

Twelve ruthenium(III) complexes bearing amine-bis(phenolate) tripodal ligands of general formula [Ru(L¹–L³)(X)(EPh₃)₂] (where L¹–L³ are dianionic tridentate chelator) have been synthesized by the reaction of ruthenium(III) precursors [RuX₃(EPh₃)₃] (where E = P, X = Cl; E = As, X = Cl or Br) and [RuBr₃(PPh₃)₂(CH₃OH)] with the tripodal tridentate ligands H₂L¹, H₂L² and H₂L³ in benzene in 1:1 molar ratio. The newly synthesized complexes have been characterized by analytical (elemental and magnetic susceptibility) and spectral methods. The complexes are one electron paramagnetic (low-spin, d⁵) in nature. The EPR spectra of the powdered samples at RT and the liquid samples at LNT shows the presence of three different ‘g’ values (g_x ≠ g_y ≠ g_z) indicate a rhombic distortion around the ruthenium ion. The redox potentials indicate that all the complexes undergo one electron transfer process. The catalytic activity of one of the complexes [Ru(pcr-chx)Br(AsPh₃)₂] was examined in the transfer hydrogenation of ketones and was found to be efficient with conversion up to 99% in the presence of isopropanol/KOH.     

Rhodium(I) carbonyl complexes of mono selenium functionalized bis(diphenylphosphino)methane and bis(diphenylphosphino)amine chelating ligands and their catalytic carbonylation activity

The chelate complexes of the types (1) and (2) have been synthesized and characterized by IR and NMR spectroscopy. The lower shift of the ν(P-Se) bands and downfield shift of the ³¹P-{¹H}NMR signals for both P(III) and P(V) atoms in 1 and 2 compared to the corresponding free ligands indicate chelate formation through selenium donor. 1 and 2 show terminal ν(CO) bands at 1977 and 1981 cm⁻¹, respectively, suggesting high electron density at the metal center. The molecular structure of 2 has been determined by single-crystal X-ray diffraction. The rhodium atom is at the center of a square planar geometry having the phosphorus and selenium atoms of the chelating ligand at cis-position, one carbonyl group trans- to selenium and one chlorine atom trans- to phosphorus atom. 1 and 2 undergo oxidative addition (OA) reaction with CH₃I to produce acyl complexes (3) and (4), respectively. The kinetics of the OA reactions reveal that 1 undergoes faster reaction by about 4.5 times than 2. The catalytic activity of 1 and 2 in carbonylation of methanol was higher than that of the well known species [Rh(CO)₂I₂]⁻ and 2 shows higher catalytic activity compared to 1.     

Novel cyclohexyl‐based aminophosphine ligands and use of their Ru(II) complexes in transfer hydrogenation of ketones

Two new aminophosphines – furfuryl‐(N‐dicyclohexylphosphino)amine, [Cy₂PNHCH₂–C₄H₃O] ( 1 ) and thiophene‐(N‐dicyclohexylphosphino)amine, [Cy₂PNHCH₂–C₄H₃S] ( 2 ) – were prepared by the reaction of chlorodicyclohexylphosphine with furfurylamine and thiophene‐2‐methylamine. Reaction of the aminophosphines with [Ru(η⁶‐p‐cymene)(μ‐Cl)Cl]₂ or [Ru(η⁶‐benzene)(μ‐Cl)Cl]₂ gave corresponding complexes [Ru(Cy₂PNHCH₂–C₄H₃O)(η⁶‐p‐cymene)Cl₂] ( 1a ), [Ru(Cy₂PNHCH₂–C₄H₃O)(η⁶‐benzene)Cl₂] ( 1b ), [Ru(Cy₂PNHCH₂–C₄H₃S)(η⁶‐p‐cymene)Cl₂] ( 2a ) and [Ru(Cy₂PNHCH₂–C₄H₃S)(η⁶‐benzene)Cl₂] ( 2b ), respectively, which are suitable catalyst precursors for the transfer hydrogenation of ketones. In particular, [Ru(Cy₂PNHCH₂–C₄H₃S)(η⁶‐benzene)Cl₂] acts as a good catalyst, giving the corresponding alcohols in 98–99% yield in 30 min at 82 °C (up to time of flight ≤ 588 h^?1). Copyright © 2014 John Wiley & Sons, Ltd.     

Asymmetric transfer hydrogenation of aromatic ketones with the ruthenium(II) catalyst derived from C2 symmetric N,N′-bis[(1S)-1-benzyl-2-O-(diphenylphosphinite)ethyl]ethanediamide

Asymmetric transfer hydrogenation of ketones with chiral molecular catalysts is realized to be one of the most magnificent tools to access chiral alcohols in organic synthesis. A new chiral phosphinite compound N,N′-bis[(1S)-1-benzyl-2-O-(diphenylphosphinite)ethyl]ethanediamide (1), has been synthesized by the reaction of chlorodiphenylphosphine with N,N′-bis[(1S)-1-benzyl-2-hydroxyethyl]ethanediamide under argon atmosphere. The oxidation of 1 with aqueous hydrogen peroxide, elemental sulfur or grey selenium in toluene gave the corresponding oxide 1a, sulfide 1b and selenide 1c, respectively. Pd, Pt and Ru complexes were obtained by the reaction of 1 with [MCl₂(cod)] (M: Pd 1d, Pt 1e) and [Ru(p-cymene)Cl₂]₂1f, respectively. All these new complexes were characterized by using NMR, FT-IR spectroscopies and microanalysis. Additionally, as a demonstration of their catalytic reactivity, the ruthenium complex 1f was tested as catalyst in the asymmetric transfer hydrogenation reactions of acetophenone derivatives with iPrOH was also investigated.     

Catalytic transfer hydrogenation of ketones catalyzed by orthometalated ruthenium(III) 2-(arylazo)phenolate complexes containing triphenylarsine

Air-stable, mononuclear orthometalated ruthenium(III) 2-(arylazo)phenolate complexes of the general composition [RuX(AsPh₃)₂(L)] (X = Cl or Br; L = CNO donor of the 2-(arylazo)phenolate ligands) have been synthesized and characterized by IR, UV-vis, and EPR as well as by elemental analysis. One of the complexes [RuBr(AsPh₃)₂(azo-OMe)] was structurally characterized by X-ray analysis and was found to be an efficient catalyst for the transfer hydrogenation of ketones with excellent conversion in the presence of isopropanol at 80 °C in 1 h.     

Synthesis and structural characterisation of cobalt(II) and iron(II) chloride complexes containing bis(2-pyridylmethyl)amine and tris(2-pyridylmethyl)amine ligands

Treatment of (2-C₅H₄N)CH_{2 3}N (TPA) with one equivalent of MCl₂ in n-BuOH at elevated temperatures affords the six-coordinate complexes [(TPA)MCl₂] (M = Co (1), Fe (2)) and, in the case of CoCl₂, the five-coordinate chloride salt [(TPA)CoCl]Cl (3). Conversely, addition of an excess of CoCl₂ in the latter reaction leads to [(TPA)CoCl]₂[CoCl₄] (4) as the only isolable product. Interaction of one equivalent of (2-C₅H₄N)CH_{2 2}NH (DPA) and MCl₂ under similar reaction conditions to that described above affords the dimeric species [(fac-DPA)MCl(μ-Cl)]₂ (M = Co (5), Fe (6)), while the bis(ligand) halide salts [(fac-DPA)₂M]Cl₂ (M = Co (7), Fe (8)) are accessible on addition of two equivalents of DPA. In the presence of air, 6 undergoes oxidation to give [ (fac-DPA)FeCl_{2 2}(μ-O)] (9). Single-crystal X-ray diffraction studies are reported for 1, 2 · MeCN, 3, , 7 · 3MeCN, 8 · 3MeCN and 9.     

Enantioselective transfer hydrogenation of ketones with planar chiral ruthenocene-based phosphinooxazoline ligands

1,2-Disubstituted planar chiral ruthenocene-based phosphinooxazoline ligands (Rc-PHOX, 3 and 4) were synthesized easily and applied in the transfer hydrogenation of ketones to chiral alcohols using 2-propanol as a source of hydrogen with excellent enantioselectivity and high catalytic activity.     

Two pseudo-N3 ligands and the catalytic activity of their ruthenium(II) complexes in transfer hydrogenation and hydrogenation of ketones

Complex RuCl₂(PPh₃)(iBu-BTP) (5) was synthesized by the reaction of 2,6-bis(5,6-bis(iso-butyl)-1,2,4-triazin-3-yl)pyridine (iBu-BTP) and RuCl₂(PPh₃)₃ in refluxing toluene, and its molecular structure was confirmed by X-ray crystallographic determination. Complex 5 was applied as a catalyst for transfer hydrogenation of ketones and exhibited catalytic activity comparable to RuCl₂(PPh₃)(Me₄BPPy) (1) (Me₄BPPy = bis(3,5-dimethylpyrazol-1-yl)pyridine) in some cases. The difference between the catalytic activity of 5 and 1 is attributed to the significantly different arrangement and positions of the PPh₃ and chlorides and also to the different electron density on the N-heterocycles. Complex 1 exhibited good to excellent catalytic activity in hydrogenation of ketones under mild conditions. These results have suggested new applications of iBu-BTP and Me₄BPPy as promising planar tridentate pseudo-N₃ ligands to construct highly active transition-metal catalysts.     

Synthesis and properties of novel aromatic poly(ester amide)s derived from 1,5-bis(4-aminobenzoyloxy)naphthalene and aromatic dicarboxylic acids

A new naphthalene ring-containing bis(ester amine), 1,5-bis(4-aminobenzoyloxy)naphthalene (2), was synthesized from the condensation of 1,5-dihydroxynaphthalene with 4-nitrobenzoyl chloride followed by catalytic hydrogenation. A series of naphthalene-containing poly(ester amide)s having inherent viscosities of 0.34-0.82 dl/g were prepared by the direct phosphorylation polyamidation from bis(ester amine) 2 with various aromatic dicarboxylic acids. The poly(ester amide)s derived from terephthalic acid, 4,4′-biphenyldicarboxylic acid, 2,6-naphthalenedicarboxylic acid, and 4,4′-oxydibenzoic acid were semicrystalline and showed less solubility. The other polymers were amorphous and readily soluble in polar organic solvents and gave flexible and tough films via solution casting. Except for four examples, the poly(ester amide)s displayed discernible glass transitions between 190 and 227 °C by differential scanning calorimetry. These poly(ester amide)s did not show significant decomposition below 400 °C in nitrogen or air.     

Structures of Mn(II) complexes of bis(2-pyridylmethyl)amine (bpa) and (2-pyridylmethyl)(6-methyl-2-pyridylmethyl)amine (Mebpa): geometric isomerism in the solid state

The crystal structures of [Mn(bpa)₂](ClO₄)₂ (1), [bpa?=?bis(2-pyridylmethyl)amine], and Mn(6-Mebpa)₂(ClO₄)₂ (2), [6-Mebpa?=?(6-methyl-2-pyridylmethyl)(2-pyridylmethyl)amine] have been determined. In 1, two facial [Mn(bpa)₂]²⁺ isomers are observed in the same unit cell, one with C _i (1a) and the other with C₂ (1b) symmetries. In 2, only the isomer with C₂ symmetry is observed. The structure of [Mn(bpa)₂]²⁺ with only C₂ symmetry has been reported previously (Inorg. Chem., 31, 4611 (1992)). The bond length order Mn–N_amine?>?Mn–N_pyridyl, observed in the C₂ and the C _i isomers in the crystals of 1, is the reverse of the order observed in the structure of [Mn(bpa)₂](ClO₄)₂ which contains only the C₂ isomer in the unit cell. The structure of 2 in which only the C₂ isomer is found, also shows the bond length order Mn–N_pyridyl?>?Mn–N_amine. In cyclic voltammetric experiments in acetonitrile solutions, 1 and 2 show irreversible anodic peaks at E _p?=?1.60 and 1.90?V respectively, (vs. Ag/AgCl), assigned to the oxidation of Mn(II) to Mn(III). The substantially higher oxidation potential of 2 is attributable to a higher rearrangement energy in complex 2 due to the steric effect of the methyl substituent.