Electrophilic aromatic addition reaction (AdEAr) to anthracene

After finding in a previous study that naphthalene and quinoline can react via electrophilic aromatic addition reaction (Ad_EAr), we applied this to anthracene. When anthracene was reacted with bromine in methanol in the presence of NaHCO₃ and pyridine, 9,10-dihydro-9,10-dimethoxyanthracene (2) was obtained in 82% yield in the absence of substitution products or oxidative demethylation products like anthraquinone. The same reaction in ethanol produced 9,10-diethoxy-9,10-dihydroanthracene (9) in much lower yield (45%). In addition, we investigated the reactivity of addition product 2. Treatment of 2 with DDQ in benzene at 65 °C for 12 h produced 9,10-dimethoxyanthracene (3) in 62% yield, and 2 was rapidly transformed to 9-methoxyanthracene (4) in methanolic NaOH in 10 min. Moreover, the acid-catalyzed aromatization of 2 in 1-propanol at 75 °C for 10 min gave 9-n-propoxyanthracene (8) in 65% yield.     

Novel Ag(I), Pd(II), Ni(II) complexes of N,N′-bis-(2,2-diethoxyethyl)imidazole-2-ylidene: Synthesis, structures, and their catalytic activity towards Heck reaction

Tetra-ether substituted imidazolium salts, LHX (where LH = N,N′-bis(2,2-diethoxyethyl)imidazolium cation and X = Br, BF₄, PF₆, BPh₄, NO₃ and NTf₂ anions) were derived from imidazole. Attempts to produce aldehyde functionalized imidazolium salt through acid hydrolysis of LHBr resulted an unexpected tetra-hydroxy compound L_AHBr and the dialdehyde compound L_BHBr. Reaction of LHBr with Ag₂O afforded [L₂Ag][AgBr₂] (1). Mononuclear Pd-complex trans-[L₂PdCl₂] (2) and dinuclear Pd-complex [(LPdCl₂)₂] (3) were obtained by 1:1 and 1:2 reaction of in situ generated Ag-carbene with Pd(CH₃CN)₂Cl₂. cis-[LPdPPh₃Cl₂] (4) was synthesized from reaction of PPh₃ with dinuclear complex 3. Hydrolysis of 3 under acidic conditions also generates a hydroxy derivative 3A and the aldehyde derivative 3B. Direct heating of LHBr with Ni(OAc)₂ · 4H₂O at 120 °C under vacuum generated trans-[L₂NiBr₂] (5). These complexes were characterized by NMR, mass, elemental analysis, and X-ray single crystal diffraction analysis. Pd--Pd interaction was observed in 3. All the Pd complexes exhibited excellent catalytic activity in Heck reaction.     

Photophysical properties and computational investigations of tricarbonylrhenium(I)[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]L and tricarbonylrhenium(I)[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]L derivatives (X = N-CH3, O, or S; L = Cl, pyridine)

We report a combined experimental and computational study of new rhenium tricarbonyl complexes based on the bidentate heterocyclic N-N ligands 2-(4-methylpyridin-2-yl)benzo[d]-X-azole (X = N-CH₃, O, or S) and 2-(benzo[d]-X-azol-2-yl)-4-methylquinoline (X = N-CH₃, O, or S). Two sets of complexes are reported. Chloro complexes, described by the general formula Re(CO)₃[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]Cl (X = N-CH₃, 1; X = O, 2; X = S, 3) and Re(CO)₃[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]Cl (X = N-CH₃, 4; X = O, 5; X = S, 6) were synthesized heating at reflux Re(CO)₅Cl with the appropriate N-N ligand in toluene. The corresponding pyridine set {Re(CO)₃[2-(4-methylpyridin-2-yl)benzo-X-azole]py}PF₆ (X = N-CH₃, 7; X = O, 8; X = S, 9) and {Re(CO)₃[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]py}PF₆ (X = N-CH₃, 10; X = O, 11; X = S, 12) was synthesized by halide abstraction with silver nitrate of 1-6 followed by heating in pyridine and isolated as their hexafluorophosphate salts. All complexes have been fully characterized by IR, NMR, electrochemical techniques and luminescence. The crystal structures of 1 and 7 were obtained by X-ray diffraction. DFT and time-dependent (TD) DFT calculations were carried out for investigating the effect of the organic ligand on the optical properties and electronic structure of the reported complexes.     

Nucleophilic substitution reactions at the Si-Cl bonds of the dichloro(methyl)silyl ligand in five- and six-coordinate complexes of ruthenium(II) and osmium(II)

Treatment of either RuHCl(CO)(PPh₃)₃ or MPhCl(CO)(PPh₃)₂ with HSiMeCl₂ produces the five-coordinate dichloro(methyl)silyl complexes, M(SiMeCl₂)Cl(CO)(PPh₃)₂ (1a, M = Ru; 1b, M = Os). 1a and 1b react readily with hydroxide ions and with ethanol to give M(SiMe[OH]₂)Cl(CO)(PPh₃)₂ (2a, M = Ru; 2b, M = Os) and M(SiMe[OEt]₂)Cl(CO)(PPh₃)₂ (3a, M = Ru; 3b, M = Os), respectively. 3b adds CO to form the six-coordinate complex, Os(SiMe[OEt]₂)Cl(CO)₂(PPh₃)₂ (4b) and crystal structure determinations of 3b and 4b reveal very different Os-Si distances in the five-coordinate complex (2.3196(11) Å) and in the six-coordinate complex (2.4901(8) Å). Reaction between 1a and 1b and 8-aminoquinoline results in displacement of a triphenylphosphine ligand and formation of the six-coordinate chelate complexes M(SiMeCl₂)Cl(CO)(PPh₃)(κ²(N,N)-NC₉H₆NH₂-8) (5a, M = Ru; 5b, M = Os), respectively. Crystal structure determination of 5a reveals that the amino function of the chelating 8-aminoquinoline ligand is located adjacent to the reactive Si-Cl bonds of the dichloro(methyl)silyl ligand but no reaction between these functions is observed. However, 5a and 5b react readily with ethanol to give ultimately M(SiMe[OEt]₂)Cl(CO)(PPh₃)(κ²(N,N-NC₉H₆NH₂-8) (6a, M = Ru; 6b, M = Os). In the case of ruthenium only, the intermediate ethanolysis product Ru(SiMeCl[OEt])Cl(CO)(PPh₃)(κ²(N,N-NC₉H₆NH₂-8) (6c) was also isolated. The crystal structure of 6c was determined. Reaction between 1b and excess 2-aminopyridine results in condensation between the Si-Cl bonds and the N-H bonds with formation of a novel tridentate “NSiN” ligand in the complex Os(κ³(Si,N,N)-SiMe[NH(2-C₅H₄N)]₂)Cl(CO)(PPh₃) (7b). Crystal structure determination of 7b shows that the “NSiN” ligand coordinates to osmium with a “facial” arrangement and with chloride trans to the silyl ligand.     

Synthesis and structure of some cis-and trans-myrtanylstannanes

Enantiomerically pure cis- and trans-myrtanylstannanes cis-MyrSnPh₃ (1), trans-MyrSnPh₃ (2), cis-MyrSnPh₂Cl (3), trans-MyrSnPh₂Cl (4), cis-MyrSnPhCl₂ (5), trans-MyrSnPhCl₂ (6), cis-MyrSnCl₃ (7), trans-MyrSnCl₃ (8) were synthesized and fully characterized by ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy. The molecular structures of 1, 3, 6, 7, and [trans-MyrSn(OH)Cl₂ · H₂O]₂ (8a) a hydrolysis product of 8, were determined by X-ray crystallography.     

Novel neutral arylnickel(II) phosphine catalysts containing 2-oxazolinylphenolato N-O chelate ligands for ethylene oligomerization and propylene dimerization

A series of new neutral arylnickel(II) phosphine complexes 1 bearing 2-oxazolinylphenolato ligands [2-(4-R¹-5-R²-C₃H₂NO)-C₆H₄O]Ni(2-R⁴-4-R³-C₆H₃)(PPh₃) were synthesized by reactions of sodium salts of 2-(4,5-dihydro-2-oxazolyl)phenol derivatives with trans-Ni(Ar)(Cl)(PPh₃)₂ or by direct reactions of the ligands with trans-Ni(Ar)(Cl)(PPh₃)₂ in the presence of NEt₃. These neutral Ni(II) complexes 1 exhibited high activities and selectivities in ethylene oligomerization and propylene dimerization. The catalytic activities and the product distributions were dependent on the selection of various organoaluminum cocatalysts and phosphine scavenger (Ni(COD)₂). The effects of various reaction conditions on ethylene oligomerization were also examined. The highest activity of 5.51 × 10⁵ g oligomers/(mol Ni · h) and 83% selectivity of C₆ internal olefins were obtained in 1a/MAO catalytic system in ethylene oligomerization. The oligomers consisted mainly of lower carbon olefins in the range of C₄-C₈. Complexes 1 showed the moderate tolerance of polar additives in ethylene oligomerization. The highest activity of 1a/MAO in propylene dimerization reached to 1.32 × 10⁵ g oligomers/(mol Ni · h).     

N-Acetyl-N,N-dipyrid-2-yl (cyclooctadiene) rhodium (I) and iridium (I) complexes: Synthesis, X-ray structures, their use in hydroformylation and carbonyl hydrosilylation reactions and in the polymerization of diazocompounds

The synthesis of novel N-acetyl-N,N-dipyrid-2-yl complexes of Rh^I and Ir^I, i.e. [RhCl(CH₃CONPy₂)(COD)] (1) and [IrCl(CH₃CONPy₂)(COD)] (2), respectively, is described. Upon prolonged treatment in CH₂Cl₂ at room temperature, complex 1 is transformed into a cationic Rh-complex, i.e. [Rh(CH₃CONPy₂)(COD)⁺RhCl₂(COD)⁻] (1a). Compound 1a crystallizes in the monoclinic space group P2₁/c, complex 2 crystallizes in the triclinic space group . Compound 1 was investigated for its catalytic activity in the hydroformylation of cyclooctene as well as of 1-octene. In addition, 1 was used in various carbonyl hydrosilylation reactions of both aldehydes and ketones. There, turn-over numbers up to 50 000 and yields in the range of 85-100% were observed. Finally, compound 1 was successfully used for the polymerization of N₂CHCOOEt yielding highly stereoregular poly(ethoxycarbonylcarbene) with M_w = 67 000 g/mol and a polydispersity index (PDI) of 2.59.     

Syntheses, structures and ligand conformations of Cu(II), Co(II) and Ag(I) complexes containing the phosphinic amide ligands

The syntheses, structures and ligand conformations of the complexes trans-Cu(L1)₂(ClO₄)₂, (L1 = N-(2-pyrimidinyl)-P,P-diphenyl-phosphinic amide), 1, [trans-Co(L1)₂(CH₃OH)₂](ClO₄)₂·O(C₂H₅)₂, 2, [trans-Co(L2)₂(H₂O)₂](ClO₄)₂·2CH₃OH, (L2 = N-(2-pyridinyl)-P,P-diphenyl-phosphinic amide), 3, [cis-Co(L2)₂(NO₃)](NO₃), 4, and [Ag(L3)(NO₃)(CH₃CN)]_∞, (L3 = N-(6-methyl-2-pyridinyl)-P,P-diphenyl-phosphinic amide), 5, are reported. The L1 and L2 ligands in the monomeric complexes 1-4 chelate the metal centers through the pyrimidyl/pyridyl nitrogen atoms and the phosphinic amide oxygen atoms, whereas the L3 ligands in complex 5 bridge the metal centers, forming a 1-D zigzag chain. The chelating L2 ligands in complexes 3 and 4 adopt cis conformations and the bridging L3 ligand in complex 5 adopts a trans conformation, respectively.     

The synthesis and single-crystal X-ray structures of palladium(II) and platinum(II) complexes of the difluorovinyl and 1-chloro-2-fluorovinyl-substituted phosphines, PPh2(Z-CFCFH) and PPh2(E-CClCFH)

The coordination chemistry of the fluorovinyl substituted phosphines PPh₂(Z-CFCFH) and PPh₂(E-CClCFH) with K₂MX₄ (M = Pd, Pt; X = Cl, Br, and I) salts has been investigated resulting in the first reported palladium(II) and platinum(II) complexes of phosphines containing partially fluorinated vinyl groups. The complexes have been characterised by a combination of multinuclear [¹H, ¹³C{¹H}, ¹⁹F, ³¹P{¹H}] NMR spectroscopy, and IR/Raman spectroscopy. The single-crystal X-ray structures of trans-[PdX₂{PPh₂(CFCFH)}₂], X = Cl (1), Br (2), I (3), trans-[PdCl₂{PPh₂(CClCFH)}₂] (4), cis-[PtX₂{PPh₂(CFCFH)}₂], X = Cl (5), Br (6), trans-[PtI₂{PPh₂(CFCFH)}₂] (7), and both cis- and trans-[PtCl₂{PPh₂(CClCFH)}₂] (8), have been determined. Results obtained from spectroscopic and crystallographic data suggest that replacement of a β-fluorine by hydrogen, whilst reducing the steric demand of the ligand, has little effect on the electronic character of the ligand. The presence of a proton in the vinyl group results in short proton-halide secondary interactions in the solid state (d(H?X) = 2.72(3) for 1, and 2.92(5) Å for 2) forming an infinite chain ribbon motif.     

2-Diphenylphosphino-2′-hydroxybiphenyl-based P-ligands and their platinum(II) complexes

2-Diphenylphosphino-2′-hydroxybiphenyl (2), become readily available via a ring opening reaction of a dibenzo[c.e][1,2]oxaphosphorine, was utilized as P-ligand in complexation with dichlorodibenzonitrile platinum to give a Cl₂Pt2₂ complex (4) with trans geometry. The O-benzyl derivative (5) could not be involved in complexation. A bidentate P-ligand (7) obtained by the interaction of hydroxy-diphenylphosphinobiphenyl 2 with chloro-dibenzo[c.e][1,2]oxaphosphorine (1) formed an 8-ring transition metal complex (Cl₂Pt7 = 9) in reaction with PtCl₂(PhCN)₂. Under the conditions of chromatography, separation of the diastereomers of 7 was not possible due to a partial isomerisation by rotation around the biphenyl axis of the molecule that is justified by the average barrier height of 6.0 kcal/mol.The stereostructure of P-ligands 2 and 7, as well as platinum complexes 4 and 9 was evaluated by B3LYP quantum chemical calculations.     

New N-heterocyclic carbene mercury(II) and silver(I) complexes

The complexes [1-(9-anthracenylmethyl)-3-octylimy]₂Hg[HgCl₄] (2a) (imy = imidazol-2-ylidene) and [1-(9-anthracenylmethyl)-3-butylbimy]₂AgPF₆ (2b) (bimy = benzimidazol-2-ylidene) have been prepared and characterized. Crystal packing of complex 2a revealed that 1D polymeric chains are formed by [1-(9-anthracenylmethyl)-3-octylimy]Hg and [HgCl₄]²⁻ through weak Hg…Cl bonds. The packing diagram of 2b showed that 1D supramolecular chains are formed by both benzimidazole ring head to tail π–π stacking interactions and anthracene ring face-to-face π–π stacking interactions.     

Dimeric and trimeric diorganosilicon chalcogenides (PhRSiE)2,3 (E = S, Se, Te; R = Ph, Me)

Ph₂SiCl₂ and PhMeSiCl₂ react with Li₂E (E = S, Se, Te) under formation of trimeric diorganosilicon chalcogenides (PhRSiE)₃ (R = Ph: 1a-3a, R = Me: cis/trans-4a (E = S), cis/trans-5a (E = Se)). In case of E = S, Se dimeric four-membered ring compounds (PhRSiE)₂ (R = Ph: 1b-2b, R = Me: cis/trans-4b (E = S), cis/trans-5b (E = Se)) have been observed as by-products. 1a-5b have been characterized by multinuclear NMR spectroscopy (¹H, ¹³C, ²⁹Si, ⁷⁷Se, ¹²⁵Te). Four- and six-membered ring compounds differ significantly in ²⁹Si and ⁷⁷Se chemical shifts as well as in the value of ¹J_SiSe.The molecular structures of 2a, 3a and trans-5a reported in this paper are the first examples of compounds with unfused six-membered rings Si₃E₃ (E = Se, Te). The Si₃E₃ rings adopt twisted boat conformations. The crystal structure of 3a reveals an intermolecular Te-Te contact of 3.858 Å which yields a dimerization in the solid state.     

Synthesis, structure, and catalytic activity of titanium complexes with new chiral 11,12-diamino-9,10-dihydro-9,10-ethanoanthracene-based ligands

A new series of organo-titanium complexes have been prepared from the reaction between Ti(NMe₂)₄ and C₂-symmetric ligands, (R,R)-11,12-bis(pyrrol-2-ylmethyleneamino)-9,10-dihydro-9,10-ethanoanthracene (1H₂), and (R,R)-bis(diphenylthiophosphoramino)-9,10-dihydro-9,10-ethanoanthracene (2H₂), (R,R)-11,12-bis(mesitylenesulphonylamino)-9,10-dihydro-9,10-ethanoanthracene (3H₂) and (R,R)-bis(diphenylthiophosphoramino)-1,2-cyclohexane (4H₂). Treatment of Ti(NMe₂)₄ with 1 equiv of 1H₂ gives, after recrystallization from a benzene solution, the binuclear double helicate titanium amide (1)₂[Ti(NMe₂)₂]₂⋅(5) in 71% yield. While under similar reaction conditions, reaction of Ti(NMe₂)₄ with 1 equiv of 2H₂, 3H₂ or 4H₂ gives, after recrystallization from a toluene or benzene solution, the mononuclear single helicate titanium amides (2)Ti(NMe₂)₂ (6), (3)Ti(NMe₂)₂ (7) and (4)Ti(NMe₂)₂ (8), respectively, in good yields. All new compounds have been characterized by various spectroscopic techniques, and elemental analyses. The solid-state structures of complexes 5-8 have further been confirmed by X-ray diffraction analyses. The titanium amides are active catalysts for the polymerization of rac-lactide, leading to the isotactic-rich polylactides.     

Copper(II) complexes of N(4)-substituted thiosemicarbazones derived from pyridine-2-carbaldehyde: Crystal structure of a binuclear complex

Ten copper(II) complexes {[CuL¹Cl] (1), [CuL¹NO₃]₂ (2), [CuL¹N₃]₂ · 2/3H₂O (3), [CuL¹]₂(ClO₄)₂ · 2H₂O (4), [CuL²Cl]₂ (5), [CuL²N₃] (6), [Cu(HL²)SO₄]₂ · 4H₂O (7), [Cu(HL²)₂] (ClO₄)₂ · 1/2EtOH (8), [CuL³Cl]₂ (9), [CuL³NCS] · 1/2H₂O (10)} of three NNS donor thiosemicarbazone ligands {pyridine-2-carbaldehyde-N(4)-p-methoxyphenyl thiosemicarbazone [HL¹], pyridine-2-carbaldehyde-N(4)-2-phenethyl thiosemicarbazone [HL²] and pyridine-2-carbaldehyde N(4)-(methyl), N(4)-(phenyl) thiosemicarbazone [HL³]} were synthesized and physico-chemically characterized. The crystal structure of compound 9 has been determined by X-ray diffraction studies and is found that the dimer consists of two square pyramidal Cu(II) centers linked by two chlorine atoms.     

Preparation and cis-to-trans transformation study of square-planar [Pt(Ln)2Cl2] complexes bearing cytokinins derived from 6-benzylaminopurine (Ln) by view of NMR spectroscopy and X-ray crystallography

Mononuclear, square-planar platinum(II) complexes involving derivatives of aromatic cytokinins as the ligands, and having the general formula cis-[Pt(L_n)₂Cl₂] (1–3) and trans-[Pt(L_n)₂Cl₂] (4–6), where n = 1–3, L₁ = 2-chloro-6-(benzylamino)-9-isopropylpurine, L₂ = 2-chloro-6-[(4-methoxybenzyl)amino]-9-isopropylpurine and L₃ = 2-chloro-6-[(2-methoxybenzyl)-amino]-9-isopropylpurine, have been synthesized and characterized by elemental analysis, MALDI-TOF mass, FT IR, ¹H, ¹³C, ¹⁵N and ¹⁹⁵Pt NMR spectral measurements. Dynamic cis-to-trans isomerization process of complex 1 in N,N′-dimethylformamide (DMF) has been investigated by means of multinuclear NMR spectroscopy. The solid-state structures of 1, 4 · (DMF)₂, and 5 have been determined by single crystal X-ray analysis. X-ray structures revealed that the heterocyclic ligands are coordinated to platinum via nitrogen atom N(7) in all the complexes studied. In vitro cytotoxicity of the prepared complexes against MCF7, G361, K562, and HOS has been evaluated. Owing to low solubility of the complexes in water, the cytotoxicity has been only tested up to 5 μM concentration. Unfortunately, all complexes have been found to be non-cytotoxic in the accessible concentration range.     

Functionalized cyclodiphosphazanes cis-[BuNP(OR)]2 (R=C6H4OMe-o, CH2CH2OMe, CH2CH2SMe, CH2CH2NMe2) as neutral 2e, 4e or 8e donor ligands

Cyclodiphosphazanes having donor functionalities such as cis-[^tBuNP(OR)]₂ (R = C₆H₄OMe-o (2); R = CH₂CH₂OMe (3); R = CH₂CH₂SMe (4); R = CH₂CH₂NMe₂ (5)) were obtained in good yield by reacting cis-[^tBuNPCl]₂ (1) with corresponding nucleophiles. The reactions of 2-5 with [RuCl₂(η⁶-cymene)]₂, [MCl(COD)]₂ (M = Rh, Ir), [PdCl₂(PEt₃)]₂ and [MCl₂(COD)] (M=Pd, Pt) result in the formation of exclusively monocoordinated mononuclear complexes of the type cis-[{^tBuNP(OR)}₂ML_n-κP] irrespective of the reaction stoichiometry and the reaction conditions. In contrast, 2-5 react with [RhCl(CO)₂]₂, [PdCl(η³-C₃H₅)]₂, CuX (X=Cl, Br, I) to give homobinuclear complexes. Interestingly, CuX produces both mono and binuclear complexes depending on the stoichiometry of the reactants and the reaction conditions. The mononuclear complexes on treatment with appropriate metal reagents furnish heterometallic complexes.     

Synthesis, characterization, reactivity and computational studies of new rhenium(I) complexes with thiosemicarbazone ligands derived from 4-(methylthio)benzaldehyde

N-thioamide thiosemicarbazone derived from 4-(methylthio)benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in methanol gave the adducts [ReX(CO)₃(HLⁿ)] (1a X = Cl, n = 1; 1a′ X = Br, n = 1; 1b X = Cl, n = 2; 1b′ X = Br, n = 2; 1c X = Cl, n = 3; 1c′ X = Br, n = 3) in good yield.All the compounds have been characterized by elemental analysis, mass spectrometry (ESI), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³, HL³·(CH₃)₂SO and 1b′·H₂O were also elucidated by X-ray diffraction. In 1b′, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms (κS,N³) forming a five-membered chelate ring, as well as three carbonyl and bromide ligands. The resulting coordination polyhedron can be described as a distorted octahedron.The structure of the dimers is based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆] (2a), [Re₂(L²)₂(CO)₆] (2b) and [Re₂(L³)₂(CO)₆] (2c) as determined by X-ray studies. Methods of synthesis were optimized to obtain amounts of these thiosemicarbazonate complexes. In these compounds the dimer structures are achieved by Re-S-Re bridges, where S is the thiolate sulphur from a κS,N³-bidentate thiosemicarbazonate ligand.Some single crystals isolated in the synthesis of 2b contain [Re(L⁴)(L²)(CO)₃] (3b) where L⁴ (=2-methylamine-5-(para-methylsulfanephenyl)-1,3,4-thiadiazole) is originated in a cyclization process of the thiosemicarbazone. Furthermore, the rhenium atom is coordinate by the sulphur and the thioamidic nitrogen of the thiosemicarbazonate (κS,N²) affording a four-membered chelate ring.     

Aminobis(phenolate)s of imidomolybdenum(VI) and -tungsten(VI)

The reactions of trans-[MoO(ONO^Me)Cl₂] 1 (ONO^Me = methylamino-N,N-bis(2-methylene-4,6-dimethylphenolate) dianion) and trans-[MoO(ONO^tBu)Cl₂] 2 (ONO^tBu = methylamino-N,N-bis(2-methylene-4-methyl-6-tert-butylphenolate) dianion) with PhNCO afforded new imido molybdenum complexes trans-[Mo(NPh)(ONO^Me)Cl₂] 3 and trans-[Mo(NPh)(ONO^tBu)Cl₂] 4, respectively. As analogous oxotungsten starting materials did not show similar reactivity, corresponding imido tungsten complexes were prepared by the reaction between [W(NPh)Cl₄] with aminobis(phenol)s. These reactions yielded cis- and trans-isomers of dichloro complexes [W(NPh)(ONO^Me)Cl₂] 5 and [W(NPh)(ONO^tBu)Cl₂] 6, respectively. The molecular structures of 4, cis-6 and trans-6 were verified by X-ray crystallography. Organosubstituted imido tungsten(VI) complex cis-[W(NPh)(ONO^tBu)Me₂] 7 was prepared by the transmetallation reaction of 6 (either cis or trans isomer) with methyl magnesium iodide.     

Structural studies of phosphor-1,1-diselenoato Mn(I) and Re(I) complexes

Mononuclear complexes of the type, M(CO)₄[Se₂P(OR)₂] (M = Mn, R = ⁱPr, 1a; Et, 1b; M = Re, R = ⁱPr, 3a; Et, 3b) can be prepared from either [-Se(Se)P(OⁱPr)₂]₂ (A) or [Se{-Se(Se)P(OEt)₂}₂] (B) with M(CO)₅Br. O,O′-dialkyl diselenophosphate ([(RO)₂PSe₂]^-, abbreviated as dsep) ligands generated from A and B act as a chelating ligand in these complexes. Upon refluxing in acetonitrile, these mononuclear complexes yield dinuclear complexes with a general formula of [M₂(CO)₆{Se₂P(OR)₂}₂] (M = Mn, R = ⁱPr, 2a; Et, 2b; M = Re, R = ⁱPr, 4a; Et, 4b). Dsep ligands display a triconnective, bimetallic bonding mode in the dinuclear compounds and this kind of connective pattern has never been identified in any phosphor-1,1-diselenoato metal complexes. Compounds 2b, 3b, and 4 are structurally characterized. Compounds 2b and 3b display weak, secondary Se?Se interactions in their lattices.     

The preparation, properties and X-ray structures of gold(I) trithiophosphite complexes

The first gold(I) trithiophosphite complexes were synthesised and fully characterised. Reaction of (tht)AuX (X = Cl, C₆F₅; tht = tetrahydrothiophene) with trithiophosphites (RS)₃P (R = Me, Ph) and the bicyclic [(SCH₂CH₂S)PSCH₂]₂ (²L) afforded the corresponding molecular complexes (RS)₃PAuX [R = Me, X = Cl (1); R = Me, X = C₆F₅ (2); R = Ph, X = Cl (3); R = Ph, X = C₆F₅ (4)], and ²L(AuX)₂ [X = Cl (5), X = C₆F₅ (6)]. Reacting (tht)AuCl consecutively with two mole equivalents of (MeS)₃P and then AgOTf, gave the ionic compound {[(MeS)₃P]₂Au}OTf (7). The compounds were characterised by multinuclear NMR spectroscopy, IR measurements and mass spectrometry, and the crystal and molecular structures of 1, 3, 6, two polymorphs of 2 as well as the known (MeO)₃PAuCl (8) were determined by X-ray diffraction. The halide complexes 1 and 8 are isostructural and exhibit infinite chains of “crossed-sword”-type aurophilic interactions with Au?Au contact distances of 3.2942(3) and 3.1635(4) Å, respectively. Complex 6 exhibits a long Au?Au contact of 3.4671(9) Å. Au?S interactions between 3.3455(7) and 3.520(2) Å are present in the structures of 1 and one polymorph of 2.