Nanostructural organization and anion effects on the temperature dependence of the optical Kerr effect spectra of ionic liquids

The intermolecular spectra of three imidazolium ionic liquids were studied as a function of temperature by the use of optical heterodyne-detected Raman-induced Kerr effect spectroscopy. The ionic liquids comprise the 1,3-pentylmethylimidazolium cation ([C(5)mim]+), and the anions, bromide (Br-), hexafluorophosphate (PF(6)-), and bis(trifluoromethanesulfonyl)imide (NTf(2)-). Whereas the optical Kerr effect (OKE) spectrum of [C(5)mim][NTf(2)] is temperature-dependent, the OKE spectra of [C(5)mim]Br and [C(5)mim][PF6] are temperature-independent. These results are surprising in light of the fact that the bulk densities of these room temperature ionic liquids (RTILs) are temperature-dependent. The temperature independence of the OKE spectra and the temperature dependence of the bulk density in [C(5)mim]Br and [C(5)mim][PF(6)] suggest that there are inhomogeneities in the densities of these liquids. The existence of density inhomogeneities is consistent with recent molecular dynamics simulations that show RTILs to be nanostructurally organized with nonpolar regions arising from clustering of the alkyl chains and ionic networks arising from charge ordering of the anions and imidazolium rings of the cations. Differences in the temperature dependences of the OKE spectra are rationalized on the basis of the degree of charge ordering in the polar regions of the RTILs.     

Raman and ab initio studies of simple and binary 1-alkyl-3-methylimidazolium ionic liquids

Raman spectra of the ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([C4mim][PF6]), 1-hexyl-3-methylimidazolium chloride ([C6mim]Cl), and 1-hexyl-3-methylimidazolium hexafluorophosphate ([C6mim][PF6]), and binary mixtures thereof, have been assigned using ab initio MP2 calculations. The previously reported anti and gauche forms of the [C4mim]+ cation have been observed, and this study reveals this to be a general feature of the long-chain 1-alkyl derivatives. Analysis of mixtures of [C6mim]Cl and [C6mim][PF6] has provided information on the nature of the hydrogen bonding between the imidazolium headgroup and the anions, and the invariance of the essentially 50:50 mixture of the predominant conformers informs on the nature of glass formation in these systems.     

An electrochemical study of the oxidation of hydrogen at platinum electrodes in several room temperature ionic liquids

The electrochemical oxidation of dissolved hydrogen gas has been studied in a range of room-temperature ionic liquids (RTILs), namely [C(2)mim][NTf(2)], [C(4)mim][NTf(2)], [N(6,2,2,2)][NTf(2)], [P(14,6,6,6)][NTf(2)], [C(4)mpyrr][NTf(2)], [C(4)mim][BF(4)], [C(4)mim][PF(6)], [C(4)mim][OTf], and [C(6)mim]Cl on a platinum microdisk electrode of diameter 10 microm. In all cases, except [C(6)mim]Cl, a broad quasi-electrochemically reversible oxidation peak between 0.3 to 1.3 V vs Ag was seen prior to electrode activation ([C(6)mim]Cl showed an almost irreversible wave). When the electrode was pre-anodized ("activated") at 2.0 V vs Ag for 1 min, the peak separations became smaller, and the peak shape became more electrochemically reversible. It is thought that the electrogenerated protons chemically combine with the anions (A-) of the RTIL. The appearance and position of the reverse (reduction) peak on the voltammograms is thought to depend on three factors: (1) the stability of the protonated anion, HA, (2) the position of equilibrium of the protonation reaction HA<==> H+ + A- , and (3) any follow-up chemistry, e.g., dissociation or reaction of the protonated anion, HA. This is discussed for the five different anions studied. The reduction of HNTf(2) was also studied in two [NTf(2)]- -based RTILs and was compared to the oxidation waves from hydrogen. The results have implications for the defining of pKa in RTIL media, for the development of suitable reference electrodes for use in RTILs, and in the possible amperometric sensing of H2 gas.     

Nanostructural organization in carbon disulfide∕ionic liquid mixtures: molecular dynamics simulations and optical Kerr effect spectroscopy

In this paper, the nanostructural organization and subpicosecond intermolecular dynamics in the mixtures of CS(2) and the room temperature ionic liquid (IL) 1-pentyl-3-methylimidazolium bis{(trifluoromethane)sulfonyl}amide ([C(5)mim][NTf(2)]) were studied as a function of concentration using molecular dynamics (MD) simulations and optical heterodyne-detected Raman-induced Kerr effect spectroscopy. At low CS(2) concentrations (<10 mol.% CS(2)/IL), the MD simulations indicate that the CS(2) molecules are localized in the nonpolar domains. In contrast, at higher concentrations (≥10 mol.% CS(2)/IL), the MD simulations show aggregation of the CS(2) molecules. The optical Kerr effect (OKE) spectra of the mixtures are interpreted in terms of an additivity model with the components arising from the subpicosecond dynamics of CS(2) and the IL. Comparison of the CS(2)-component with the OKE spectra of CS(2) in alkane solvents is consistent with CS(2) mainly being localized in the nonpolar domains, even at high CS(2) concentrations, and the local CS(2) concentration being higher than the bulk CS(2) concentration.     

Additivity in the optical kerr effect spectra of binary ionic liquid mixtures: implications for nanostructural organization

Low-frequency spectra of binary room-temperature ionic liquid (RTIL) mixtures of 1-pentyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide and 1-pentyl-3-methylimidazolium bromide in the 0-250 cm(-1) region were studied as a function of mole fraction at 295 K. The spectra were obtained by use of optical heterodyne-detected Raman-induced Kerr effect spectroscopy (OHD-RIKES). The spectra of these binary mixtures are well described by the weighted sums of the spectra for the neat RTILs. This surprising result implies that the intermolecular modes giving rise to the spectra of the neat liquids must also produce the spectra of the mixtures. Additivity of the OKE spectra can be explained by a model in which locally ordered domains are assumed to exist in the neat liquid with the structures of these locally ordered domains preserved upon mixing. Recently published molecular dynamics simulations show that RTILs are nanostructurally organized with ionic networks and nonpolar regions. If ionic networks also exist in the mixture, the additivity of the OKE spectra implies that there are "blocks" along the network of the mixture that are ordered in the same way as in the neat liquids. These "block co-networks" would have a nanostructural organization resembling that of a block copolymer.     

咪唑基离子液体的物理化学性质估算及预测(英文)

根据经验和半经验方程及空隙模型理论,可以估算及预测离子液体在298.15K的物理化学性质.本文讨论了离子液体的分子体积,密度,标准熵,晶格能,表面张力,等张比容,摩尔蒸发焓,空隙体积,空隙率和热膨胀系数.通过实验测得的三种离子液体1-乙基-3-甲基咪唑硫酸乙酯([C2mim][EtSO4)]),1-丁基-3-甲基咪唑硫酸辛酯([C4mim][OcSO4])和1-乙基-3-甲基咪唑双三氟甲磺酰亚胺盐([C2mim][NTf2])的密度和表面张力估算了它们的其它物理化学性质.由这三种离子液体的分子体积及等张比容预测了同系列中其它离子液体[Cnmim][EtSO4],[Cnmim][OcSO4]和[Cnmim][NTf2](n=1-6)的分子体积及等张比容,由此计算出它们的密度及表面张力.进而预测了它们的物理化学性质.将预测的离子液体[C4mim][NTf2]和[C2mim][OcSO4]的密度值与文献报导的实验值进行比较,其偏差在实验误差范围内.最后,将由Kabo经验方程计算的七个离子液体[C2mim][EtSO4]、[C4mim][OcSO4]、[C2mim][NTf2]、[C4mim][NTf2]、丁基三甲基铵双三氟甲磺酰亚胺盐([N4111][NTf2])、甲基三辛基铵双三氟甲磺酰亚胺盐([N8881][NTf2])和1-辛基-3-甲基吡啶四氟硼酸盐([m3opy][BF4])的摩尔蒸发焓与由Verevkin简单规则预测的摩尔蒸发焓进行比较,发现两者符合很好.因此,在缺乏密度和表面张力实验数据的情况下,可以用Verevkin简单规则来预测离子液体的摩尔蒸发焓.     

1-正辛基-3-甲基咪唑六氟磷酸盐离子液体对聚砜分离膜的结构控制及其作用机理

以1-正辛基-3-甲基咪唑六氟磷酸盐[C8mim][PF6]作为膜结构控制剂,采用相转化法制备具有不同孔结构的聚砜分离膜.随着[C8mim][PF6]含量的增大,聚砜膜的孔结构从典型的不对称指状孔结构、高度拉长的大孔结构、典型的大空穴,变化至海绵状孔结构,离子液体[C8mim][PF6]在聚砜膜制备中表现出孔结构控制、增塑作用.通过能谱分析表明,[C8mim][PF6]在所制备的聚砜膜中存在部分的保留,通过水与聚砜膜表面接触角的测定,[C8mim][PF6]在聚砜膜中的残留提高了膜的亲水性能.基于相分离过程的基本理论,探讨了疏水性[C8mim][PF6]在铸膜液相分离过程中孔结构形成的作用机理.研究表明,[C8mim][PF6]在铸膜液中含量越高,对于相分离的延时效应越大,体系更易发生延时分相.     

Deviations from ideality in mixtures of two ionic liquids containing a common ion

Excess molar volumes of six binary mixtures composed of two ionic liquids of the 1-methyl-3-alkyl-imidazolium bis(trifluoromethylsulfonyl)amide family -- ([C(m)()mim] + [C(n)()mim])[NTf(2)] with n and m ranging from 2 to 10 -- were measured for several compositions at 298 and 333 K. Similarly, three other binary systems containing [C(4)mim](+) (1-methyl-3-butylimidazolium) as a common cation have been studied: [C(4)mim]([NTf(2)] + [PF(6)]), [C(4)mim]([NTf(2)] + [BF(4)]) and [C(4)mim]([BF(4)] + [PF(6)]). Thus, the mixing process of two distinct ions of equal sign embedded in a constant field network of a given counterion was analyzed. All systems exhibit small, positive V(E) values of the order of a few tenths of cm(3) mol(-1), which are essentially temperature and pressure independent. The results show additive trends, for instance, the V(E) values become larger as the difference between the alkyl chain lengths of the two cations increases. The Flory theory of mixtures provides a useful, semiquantitative correlation between the excess volumes and excess enthalpies in these systems, allowing for comparison with analogous results obtained within the linear primary alcohols.     

Ideal gas solubilities and solubility selectivities in a binary mixture of room-temperature ionic liquids

This study focuses on the solubility behaviors of CO2, CH4, and N2 gases in binary mixtures of imidazolium-based room-temperature ionic liquids (RTILs) using 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2mim][Tf2N]) and 1-ethyl-3-methylimidazolium tetrafluoroborate ([C2mim][BF4]) at 40 degrees C and low pressures (approximately 1 atm). The mixtures tested were 0, 25, 50, 75, 90, 95, and 100 mol % [C2mim][BF4] in [C2mim][Tf2N]. Results show that regular solution theory (RST) can be used to describe the gas solubility and selectivity behaviors in RTIL mixtures using an average mixture solubility parameter or an average measured mixture molar volume. Interestingly, the solubility selectivity, defined as the ratio of gas mole fractions in the RTIL mixture, of CO2 with N2 or CH4 in pure [C2mim][BF4] can be enhanced by adding 5 mol % [C2mim][Tf2N].     

Nanocomposite ion gels based on silica nanoparticles and an ionic liquid: ionic transport, viscoelastic properties, and microstructure

The dispersion of silica nanoparticles made an ionic liquid, 1-ethyl-3-methyl imidazolium bis(trifluoromethanesulfonyl)amide ([C(2)mim][NTf(2)]), gelled even by the addition of 2-3 wt %, due to the formation of interconnected particulate silica networks in [C(2)mim][NTf(2)]. The ionic transport and viscoelastic properties of these nanocomposite ion gels were investigated in relation to the microstructure. Despite their solid-like behavior, the nanocomposite ion gels exhibited a high ionic conductivity of approximately 10(-2) S cm(-1) at 30 degrees C, which is comparable to that of neat [C(2)mim][NTf(2)]. Intriguing viscoelastic responses, such as shear-thinning and shear-induced sol-gel transitions, were found in all of the nanocomposite ion gels. By adjusting the silica concentration, the elastic modulus ( G') could be precisely controlled in a range of more than 3 orders of magnitude and reached approximately 10(6) Pa without a considerable decrease in the ionic conductivity; the characteristic viscoelastic response was also maintained. For the aggregation mechanism in [C 2 mim][NTf(2)], the reaction-limited cluster aggregation (RLCA) model was proposed by rheology and light scattering measurements.     

室温离子液体对氨基苯磺酸的萃取性能

系统研究了[C₄mim][PF₆], [C₆mim][PF₆], [C₆mim][BF₄]和[C₈mim][BF₄]室温离子液体对间氨基苯磺酸、对氨基苯磺酸稀水溶液的萃取平衡. 实验结果表明: 萃取温度和相体积比的变化对分配比影响不大; 水相pH值对萃取平衡有较大的影响, 氨基苯磺酸在离子液体/水体系中的分配比在pH＝4.2时达到最大值; 水相中CaCl₂或Na₂SO₄的存在能较大幅度地提高氨基苯磺酸的分配比; 离子液体的阴离子的性质对分配比有显著的影响, 阴离子为[BF₄]^－的离子液体对氨基苯磺酸的萃取能力大于阴离子为[PF₆]^－的离子液体; 咪唑环上烷基链的长度也对萃取效果有一定的影响. 在所研究的离子液体中, [C₆mim][BF₄]和[C₈mim][BF₄]对氨基苯磺酸有较好的萃取性能, 且萃取相中的氨基苯磺酸可回收利用, 离子液体也可循环使用.     

Decoupling charge transport from the structural dynamics in room temperature ionic liquids

Light scattering and dielectric spectroscopy measurements were performed on the room temperature ionic liquid (RTIL) [C4mim][NTf2] in a broad temperature and frequency range. Ionic conductivity was used to estimate self-diffusion of ions, while light scattering was used to study structural relaxation. We demonstrate that the ionic diffusion decouples from the structural relaxation process as the temperature of the sample decreases toward T(g). The strength of the decoupling appears to be significantly lower than that expected for a supercooled liquid of similar fragility. The structural relaxation process in the RTIL follows well the high-temperature mode coupling theory (MCT) scenario. Using the MCT analysis we estimated the dynamic crossover temperature in [C4mim][NTf2] to be T(c) ~ 225 ± 5 K. However, our analysis reveals no sign of the dynamic crossover in the ionic diffusion process.     

Physicochemical properties, structure, and conformations of 1-Butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide [C4mim]NTf2 ionic liquid

Thermodynamic properties of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C4mim]NTf2) ionic liquid have been studied by adiabatic calorimetry in the temperature range of 5 to 370 K. This compound has been found to form crystal, liquid, and glass. The temperature and enthalpy of fusion for [C(4)mim]NTf(2) have been determined to be T(fus) = 270.22 +/- 0.02 K and Delta(fus)H = 23.78 +/- 0.04 kJ.mol(-1), respectively. The heat capacity of crystalline [C(4)mim]NTf(2) in the T range of 205 to 255 K may vary by a few percent, subject to the procedure of the crystal preparation. The glass transition temperature for [C(4)mim]NTf(2) has been found to be T(g) = 181.5 +/- 0.1 K. On the basis of the results of DFT quantum chemical calculations, the experimental vibrational spectra, and the available literature data, thermodynamic properties of [C(4)mim]NTf(2) in the ideal-gas state have been calculated by the statistical thermodynamic methods. The entropy values for the gaseous compound obtained from the experimental data and the calculations are in satisfactory agreement.     

A remarkable anion effect on palladium nanoparticle formation and stabilization in hydroxyl-functionalized ionic liquids

Pd nanoparticles (NPs) with a small size and narrow size distribution were prepared from the decomposition of Pd(OAc)(2) in a series of hydroxyl-functionalized ionic liquids (ILs) comprising the 1-(2'-hydroxylethyl)-3-methylimidazolium cation and various anions, viz. [C(2)OHmim][OTf] (2.4 ± 0.5 nm), [C(2)OHmim][TFA] (2.3 ± 0.4 nm), [C(2)OHmim][BF(4)] (3.3 ± 0.6 nm), [C(2)OHmim][PF(6)] (3.1 ± 0.7 nm) and [C(2)OHmim][Tf(2)N] (4.0 ± 0.6 nm). Compared with Pd NPs isolated from the non-functionalized IL, [C(4)mim][Tf(2)N] (6.2 ± 1.1 nm), it would appear that the hydroxyl group accelerates the formation of the NPs, and also helps to protect the NPs from oxidation once formed. Based on the amount of Pd(OAc)(2) that remains after NP synthesis (under the given conditions) the ease of formation of the Pd NPs in the [C(2)OHmim](+)-based ILs follows the trend [Tf(2)N](-), [PF(6)](-) > [BF(4)](-) > [OTf](-) > [TFA](-). Also, the ability of the [C(2)OHmim](+)-based ILs to prevent the Pd NPs from undergoing oxidation follows the trend [Tf(2)N](-) > [PF(6)](-) > [TFA](-) > [OTf](-) > [BF(4)](-). DFT calculations were employed to rationalize the interactions between Pd NPs and the [C(2)OHmim](+) cation and the various anions.     

Nicotine: on the potential role of ionic liquids for its processing and purification

Marked solubility differences of nicotine in the ionic liquids [C(2)mim][NTf(2)], [C(2)mim][EtOSO(3)], and [C(n)mim]Cl, 6 相似文献   

Colloidal stability of bare and polymer-grafted silica nanoparticles in ionic liquids

The colloidal stability of bare and poly(methyl methacrylate) (PMMA)-grafted silica nanoparticles was studied in 1-alkyl-3-methylimidazolium ([C(n)mim])-based ionic liquids (ILs) with different anionic structures. The theoretical estimation of the colloidal interaction between monodispersed bare silica particles by using the Derjaguin-Landau-Verwey-Overbeek theory indicates that bare silica particles cannot be stabilized and they rapidly form aggregates in all the ILs used in this study. The instability of bare silica particles was experimentally confirmed by dynamic light scattering measurement and in situ transmission electron microscopy observations by utilizing the negligible vapor pressure of ILs. This evidence suggests that electrostatic stabilization is inefficient in ILs because of the high ionic atmosphere and the resulting surface-charge screening. The PMMA-grafted silica particles exhibited long-term colloidal stability in [C(4)mim][PF(6)] and [C(n)mim][NTf(2)], which are compatible with the grafted PMMA. On the other hand, the PMMA-grafted particles could not be stabilized in [C 4mim][BF 4] due to the poor solubility of the grafted PMMA in the IL. Effective steric stabilization is important for obtaining stable colloidal particles in ILs.     

Lower critical solution temperature behavior of linear polymers in ionic liquids and the corresponding volume phase transition of polymer gels

Poly(benzyl methacrylate) (PBzMA) and its copolymers exhibit lower critical solution temperature (LCST)-type phase separation in common hydrophobic ionic liquids (ILs) such as 1-ethyl-3-methylimidazolium bis(trifluoromethane sulfone)imide ([C(2)mim][NTf2]). The turbidity measurements for PBzMA/IL mixed systems reveal that the LCST-type phase separation temperatures change significantly with the changes in the chemical structures of polymers and ILs. Moreover, cross-linked PBzMA gels show reversible and discontinuous volume phase transition in [C(2)mim][NTf2] with the changes in temperature.     

Study on the Conductivities of Pure and Aqueous Bromide-Based Ionic Liquids at Different Temperatures

Electrical conductivities were measured for the pure ionic liquids [C₆mim][Br] (1-hexyl-3-methylimidazolium bromide) and [C₈mim][Br] (1-octyl-3-methylimidazolium bromide) at 0.1 MPa from 293.15 to 333.15 K. Conductivity measurements were also made for the binary water + [C₆mim][Br] and water + [C₈mim][Br] systems and their ternary water + [C₆mim][Br] + [C₈mim][Br] system at 0.1 MPa and 293.15, 298.15, and 303.15 K. The conductivity data of the pure ionic liquids were correlated by the VFT (Vogel-Tamman-Fulcher) equation, and the fitting parameters and mean absolute deviations were determined. New explanations are presented for the molality-dependent behavior of the conductivity of the binary water + [C₆mim][Br] and water + [C₈mim][Br] systems. The generalized Young’s rule and the semi-ideal solution theory for conductivity were used to predict the conductivities of the ternary water + [C₆mim][Br] + [C₈mim][Br] system from the conductivities of its corresponding binary water + [C₆mim][Br] and water + [C₈mim][Br] subsystems. The predictions are in good agreement with the measured values.     

Ionic liquids as a convenient new medium for the catalytic asymmetric dihydroxylation of olefins using a recoverable and reusable osmium/ligand

The use of room-temperature ionic liquids (RTILs) in the Sharpless catalytic asymmetric dihydroxylation (AD) as a cosolvent or replacement of the tert-butanol was studied in detail by screening 11 different RTILs. The AD reaction is faster in 1-n-butyl-3-methylimidazolium hexafluorophosphate [C(4)mim][PF(6)] as a cosolvent than in the conventional system of tert-butanol/H(2)O. For the range of six substrates tested, comparable or even higher yields and enantiomeric excess (ee) were found using [C(4)mim][PF(6)] or 1-n-octyl-3-methylimidazolium hexafluorophosphate [C(8)mim][PF(6)] compared to the conventional solvent system. Due to high affinity of the catalytic osmium/quiral ligand system to the ionic liquid, the use of ionic liquid/water (biphasic) or ionic liquid/water/tert-butanol (monophasic) solvent systems provides a recoverable, reusable, robust, efficient, and simple system for the AD reaction. Using 1-hexene and [C(4)mim][PF(6)] as RTIL it was possible to reuse the catalytic system for 9 cycles with only a 5% of yield reduction from the first cycle, allowing an overall yield of 87%, TON = 1566, and with similar ee. Additionally, for each cycle, after extraction of the reaction mixture with diethyl ether, the osmium content in the organic phase (containing the AD product) and in the aqueous phase was in the range of the detection limit (相似文献   

CO(2) as a separation switch for ionic liquid/organic mixtures

A novel technique to separate ionic liquids from organic compounds is introduced which uses carbon dioxide to induce the formation of an ionic liquid-rich phase and an organic-rich liquid phase in mixtures of methanol and 3-butyl-1-methyl-imidazolium hexafluorophosphate ([C4mim][PF6]). If the temperature is above the critical temperature of CO2 then the methanol-rich phase can become completely miscible with the CO2-rich phase, and this new phase is completely ionic liquid-free. Since CO2 is nonpolar, it is not equipped to solvate ions. As the CO2 dissolves in the methanol/[C4mim][PF6] mixture, the solvent power of the CO2-expanded liquid is significantly reduced, inducing the formation of the second liquid phase that is rich in ionic liquid. This presents a new way to recover products from ionic liquid mixtures and purify organic phases that have been contaminated with ionic liquid. Moreover, these results have important implications for reactions done in CO2/ionic liquid biphasic mixtures.