A novel reaction of 2-(arylamino)-1-(methylthio)-1-tosylethenes with hydrogen iodide leading to quinoline derivatives

The reaction of 2-(arylamino)-1-(methylthio)-1-tosylethenes (4) with hydrogen iodide in refluxing toluene gave 3-tosyl-2-(tosylmethyl)quinoline derivatives (6) in good yields. In this reaction, hydrogen iodide dose not only reductively removes the methylthio group of 4 to form an intermediary 1-(arylamino)-2-tosylethene (5), but also serves as a protic catalyst for the subsequent dimeric cyclization of 5 to lead to the quinoline derivatives (6).     

Trimethyl borate/magnesium halide complex-induced one-pot homologation reactions of isoquinoline with dialkyl-TMP-zincate

Novel one-pot homologation reactions of isoquinoline with lithium dialkyl-TMP-zincate⋅2MgBrCl/trimethyl borate are described. 1-Alkylisoquinolines (2, 3A, 4A, 5A, 6, and 7) and 1-alkyl-3,4-dihydroisoquinolines (3B, 4B, and 5B) are easily prepared under the presented reaction conditions. The role of the B(OMe)₃/MgBrCl complex is examined in these homologation reactions. The specific reaction mechanisms, including 1,2-migration of the alkyl ligands from 1-isoquinolylzincates, are proposed. The migratory aptitudes of ligands of 1-isoquinolylzincates are also discussed.     

The reaction of 4-amino-2-oxazolines with isocyanates and isothiocyanates. Synthesis and X-ray structures of polysubstituted 2-imidazolidinones, 1,3-oxazolidines and 1,3-thiazolidines

Reactions of 4-alkylamino-2-phenyl-2-oxazolines 1 with isocyanates and isothiocyanates provide unprecedented efficient and regioselective heterocycle-heterocycle transformations. Compounds 1 reacted rapidly with tosyl isocyanate yielding directly 3-alkyl-4-benzamido-1-tosyl-2-imidazolidinones 4 in almost quantitative yields. The corresponding ureido intermediates 2 were not isolable species. However, the reactions with non-sulfonylated isocyanates or isothiocyanates were slower, leading to the expected ureido and thioureido derivatives 5, which were easily and efficiently transformed to either polysubstituted 2-imino-1,3-oxazolidine or 2-imino-1,3-thiazolidine hydrochlorides 7, respectively, by treatment with hydrochloric acid. The possible reasons for this disparity in chemical behaviour are discussed. X-ray crystallographic structures for 4-benzamido-3-methyl-1-tosyl-2-imidazolidinone 4b, 4-[1-isopropyl-3-(4-nitrophenyl)ureido]-2-phenyl-2-oxazoline 5e, (Z)-3-benzyl-4-benzamido-2-phenylimino-1,3-oxazolidine hydrochloride 7a and (Z)-3-benzyl-4-benzamido-2-phenylimino-1,3-thiazolidine hydrochloride 7b have been determined.     

New succinamic acids, -γ-lactones, and -succinimides from (3-perfluoroalkyl-2-iodoalkyl)succinic acid anhydrides and amines : Highly surface active amphiphiles

The (3-perfluoroalkyl-2-iodoalkyl)succinic anhydrides (4 and 5) react with primary (RNH₂) and secondary amines (RYNH) to yield (3-F-alkyl-2-iodoalkyl)succinamic acids. A second mole of RYNH gives the conjugate bases, 7a and 7b, as two position isomers. Only the C-1 isomer 7a can cyclize to a γ-lactone, while the carboxylate ion intramolecularly displaces iodide ion from CHI as RYNH₂⁺I⁻. Simultaneously, the nucleophilic carboxylate at C-4 in the unreacted isomer 7b attacks the CONHYR group at C-1 to displace the amine and revert to the anhydride 4. Then Step (1) is repeated until all of 7a and 7b are consumed. Though a weak base, COO⁻ is an effective nucleophile in the coiled conformation of 7a or 7b. In the next step, the CH₂(CO)NHR group of the γ-lactone, with an N-attack at the carbonyl rearranges to an N-alkyl (3-F-alkyl-2-hydroxypropyl)succinimide. As above, the lactone opens its ring under stereoelectronic control (with proper alignment of lone pairs on the two O atoms) and forms a new succinimide ring. These reactions occur, successively, in an aprotic, low polarity solvent under mild conditions. Elimination of HI from 4 or 5, or the iodopropylsuccinamic acid, does not occur. Diamines, e.g. (CH₃)₂N(CH₂)₃NH₂ (23) or (CH₃)₂N(CH₂)₃NH(CH₃) (27), reacting with 1 mol of 4 or 5, yield the zwitterionic salt., which inter alia, cyclizes smoothly to the γ-lactone HI salt. The lactone.HI salt from 23, as above, rearranges to the N-(dimethylammonium)propyl (3-F-alkyl-2-hydroxypropyl)succinimide iodide, while the lactone salt 33HI from diamine 27, like that from diethylamine, does not rearrange. Diamine 23, reacting with the t-butyl half ester, R_FCH₂CHICH₂CH(CO₂H)CH₂CO₂C(CH₃)₃, displaces t-butyl alcohol to yield the zwitterionic salt and γ-lactone HI salt, but not the succinimide. Radical addition of R_FI to N-butyl prop-2-enylsuccinimide (100 °C; no solvent) provides the desired adduct in high yield. By contrast, N-(3-dimethylamino)propyl (3-F-alkyl-2-iodopropyl)succinimide (25), loses HI intramolecularly to the basic (CH₃)₂N group; the concentration of 25 is 10 times greater than amines in reactions above. The R_F-surfactants (nonionic, zwitterionic, anionic, and cationic salts) of this work have an oriented F-alkyl segmented tail and a fairly complex polar head; and as a group, they lower the surface tension (γ_a) of water to 15-17 mN m⁻¹ at 1.5-1.7 mM concentration.     

The new dispirobino and dispiroansa spermine derivatives of cyclotriphosphazenes

In this study, the crystal structures of the dispiroansa spermine derivatives of cyclotriphosphazene are characterised for the first time. The reaction of spiro-, gem-disubstituted cyclotriphosphazene derivatives, N₃P₃Cl₄R₂ [R = NHPh, (HN(CH₂)₃NH)_0.5, (OCH₂C(CH₃)₂CH₂O)_0.5], (1–3), with spermine (4), in aprotic solvents such as CH₂Cl₂ results in a series of dispirobino spermine derivatives of cyclotriphosphazene (5a, 6a, 7), namely spermine bridged compounds. Whereas, in protic solvents such as CHCl₃ give, dispiroansa derivatives (8–10) namely tetracyclic cyclotriphosphazene. The new series of dispirobino and dispiroansa spermine derivatives of cyclotriphosphazene (5a, 6a, 7–10) have been characterised by elemental analysis, mass spectrometry, X-ray (for 5a, 8, 10) and ¹H, ³¹P NMR spectroscopies.     

Naphthyridines. Part 3: First example of the polyfunctionally substituted 1,2,4-triazolo[1,5-g][1,6]naphthyridines ring system

Treatment of 1,2,4-triazoles (1) with diethylmalonate in bromobenzene gave 1,2,4-triazolo-[1,5-a]pyridines 2. Chlorination of 2 using POCl₃/DMF (Vilsmeier reagent) led to the isolation of 7-chloro-6-formyl-1,2,4-triazolo[1,5-a]pyridine derivative 4, which reacted with the stabilized ylid 5 to afford 6-ethoxycarbonylvinyl-1,2,4-triazolo[1,5-a]-pyridines 6. Azidation of 6 yielded the corresponding azido compound 7, (Scheme 2). Reduction of 7 with Na₂S₂O₄ gave the corresponding 7-amino compound 8, which cyclized in boiling DMF to give the novel 1,2,4-triazolo[1,5-g][1,6]naphthyridines 9. On the other hand, reacting 7 with one equivalent of PPh₃ (aza-Wittig reaction) in CH₂Cl₂ gave 7-imino-phosphorane derivative 10, and subsequent cyclization in boiling DMF afforded the new 1,2,4-triazolo[1,5-g][1,6]naphthyridine derivative 11 (Scheme 3). However, treatment of 10 with phenyl isothiocyanate in 1,2-dichlorobenzene at reflux temperature gave the new 1,2,4-triazolo[1,5-g][1,6]naphthyridine derivative 14 (Scheme 4). Refluxing 6 with excess of a primary amines 15a,b in absolute. EtOH yielded the corresponding 7-alkyl-amino-1,2,4-triazolo[1,5-a]pyridines 16a,b. These obtained amines 16a,b underwent intramolecular heterocyclization in boiling DMF to give the novel 9-alkyl-1,2,4-triazolo[1,5-g][1,6]-naphthyridines 17a,b, in excellent yields (Scheme 5).     

Reactivity of 1-boraadamantanes towards bis(trialkylstannyl)ethynes. First examples of 3-boratricyclo[5.3.1.1]dodecanes, and the molecular structure of a tetraalkyldiboroxane

1-Boraadamantane (1) and 2-ethyl-1-boraadamantane (1(2-Et)) react with bis(trialkylstannyl)ethynes (3), R₃Sn-CC-SnR₃ with R=Me (a), Et (b), in a 1:1 molar ratio by 1,1-organoboration under very mild conditions to give the 4-methylene-3-borahomoadamantane derivatives 4a,b and 7a,b, respectively, which are dynamic at room temperature with respect to deorganoboration. The compounds 4a,b react further with 3a,b by 1,1-organoboration to the tricyclic butadiene derivatives 5a,b. Attempts to crystallise 4a afforded the product of hydrolysis, the diboroxane 6a which was characterised by X-ray structural analysis. All products were characterised in solution by ¹H-, ¹¹B-, ¹³C- and ¹¹⁹Sn-NMR spectroscopy.     

An efficient microwave assisted synthesis of novel class of Rhodanine derivatives as potential HIV-1 and JSP-1 inhibitors

(Z)-5-(2-(1H-Indol-3-yl)-2-oxoethylidene)-3-phenyl-2-thioxothiazolidin-4-one (7a-q) derivatives have been synthesized by the condensation reaction of 3-phenyl-2-thioxothiazolidin-4-ones (3a-h) with suitably substituted 2-(1H-indol-3-yl)-2-oxoacetaldehyde (6a-d) under microwave condition. The thioxothiazolidine-4-ones were prepared from the corresponding aromatic amines (1a-e) and di-(carboxymethyl)-trithiocarbonyl (2). The aldehydes (6a-h) were synthesized from the corresponding acid chlorides (5a-d) using HSnBu₃.     

Fluorescent aminoarylcyclotetraphosphazenes

In the present work, octachlorocyclotetraphosphazatetraene (1), N₄P₄Cl₈, is reacted with aniline (2), 1-napthylamine (4) and 2-aminoanthracene (6) to give octakis(arylamino)cyclotetraphosphazenes (3, 5 and 7). These cyclotetraphosphazene compounds (3, 5 and 7) have been fully characterized by elemental analysis, mass (MS), FT-IR, ¹H and ³¹P NMR spectroscopies. The molecular and crystal structures of 5 have been characterized by X-ray crystallography. The structure of 5 is monoclinic with the space group P21/c. The octakis(1-napthylamino)-(5) and octakis(2-aminoanthracene)-(7) cyclotetraphosphazene compounds have been synthesised for the first time in this study. The fluorescence properties of 3, 5 and 7 have been investigated in tetrahydrofuran (THF) and have been shown to have highly fluorescence behavior. This work also presents the quenching of arylamino substituted cyclotetraphosphazene derivatives (3, 5 and 7) by p-benzoquinone (BQ) or hydroquinone (HQ).     

Application of the Gould-Jacobs reaction to 4-amino-2,1,3-benzoselenadiazole

An effective method for the synthesis of 4-amino-2,1,3-benzoselenadiazole (4) has been described. Reduction of readily available 4-nitrobenzothiadiazole 6 with SnCl₂·2H₂O afforded 1,2,3-triaminobenzene dihydrochloride 2. The latter upon treatment with aqueous SeO₂ solution provided desired amine 4. Nucleophilic vinylic substitution of activated enol ethers 7 with amine 4 led to (benzoselenadiazol-4-ylamino)methylene derivatives 8. Thermal cyclization of derivatives 8a-c, e, f under Gould-Jacobs reaction conditions gave angularly annelated 7-(non)substituted selenadiazolo[3,4-h]quinolones 9. Acid hydrolysis of etyl ester 9c afforded corresponding acid 10. All prepared selenadiazoloquinolones were tested for antimicrobial activity.     

Efficient and selective synthesis of quinoline derivatives

The bromination reaction of 1,2,3,4-tetrahydroquinoline (7) was investigated by NBS and molecular bromine. One-pot synthesis is described for synthetically valuable 4,6,8-tribromoquinoline (3) and 6,8-dibromo-1,2,3,4-tetrahydroquinoline (6) on bromination of 1,2,3,4-tetrahydroquinoline (7) in efficient yields (75 and 90%, respectively). 6-Bromo- (4) and 6,8-dibromo-1,2,3,4-tetrahydroquinolines (6) were converted to 6-bromo- (1) and 6,8-dibromo quinolines (2), respectively, by aromatization with DDQ in 83 and 77% yields, respectively. Several novel trisubstituted quinoline derivatives were efficiently prepared via lithium-halogen exchange reactions of tribromide 3. Treatment of 4,6,8-tribromoquinoline with BuLi followed by quenching with electrophiles [Si(CH₃)₃Cl, S₂(CH₃)₂, I₂] regioselectively proceeded at C-4 and C-8 sites and afforded corresponding 4,8-disubstituted-6-bromoquinolines. Similarly, lithiation of tribromide 3 followed by addition of water to the intermediate produced 6-bromoquinoline in 65% yield. Copper-induced nucleophilic substitution of tribromide 3 with NaOMe afforded 4,6,8-trimethoxyquinoline (17) in 60% yield.     

Study on the reactions of ethyl 4,4,4-trifluoro-3-oxobutanoate with arylidenemalononitriles

In the presence of a catalytic amount of NEt₃, ethyl 4,4,4-trifluoro-3-oxobutanoate 1 reacted readily with arylidenemalononitriles 2 in ethanol at room temperature. It gave two products 2-trifluoromethyl-3,4-dihydro-2H-pyran derivatives 3 and 2-(trifluoromethyl)piperidine derivatives 4, the ratio of 3 and 4 was depended on the substrates 2 and reaction solvents. Reflux of the ethanol solution of 4 with a catalytic amount of NEt₃ afforded 2-trifluoromethyl-1,4,5,6-tetrahydropyridine derivatives 5 in moderate to good yields. The structures of new compounds 3, 4 and 5 were determined by spectral methods, microanalysis and X-ray diffraction analysis. A possible reaction mechanism for the formation of 3, 4 and 5 was presented.     

Electrochemical fluorination of several esters derived from oxolane-2-yl-carboxylic acid, oxolane-2-yl-methanol and oxane-2-yl-methanol

Electrochemical fluorination (ECF) of the ester derivatives of oxolane-2-yl-carboxylic acid (1), oxolane-2-yl-methanol (2) and oxane-2-yl-methanol (3) were investigated. Perfluoro(oxolane-2-yl-carbonylfluoride) (4) was obtained from derivatives of 1 and 2, and perfluoro(oxane-2-yl-carbonylfluoride) (5) was obtained from derivatives of 3 as the desired compounds, respectively. From the ECF of acetates of 2 and 3, perfluorospiroethers having a dioxolane ring were also obtained as the cyclization product in low yield together with the desired perfluoroacid fluoride (4 and 5). The structure of these perfluorospiroethers was confirmed by analyzing the chlorinated products, which were obtained by the reaction with AlCl₃.     

Regioselective synthesis of 1- and 4-substituted 7-oxopyrazolo[1,5-a]pyrimidine-3-carboxamides

The synthesis of 7-substituted pyrazolo[1,5-a]pyrimidine-3-carboxamides was studied. First, methyl 7-hydroxypyrazolo[1,5-a]pyrimidine-3-carboxylate (5) was prepared in three steps from methyl 5-amino-1H-pyrazole-4-carboxylate (3). Treatment of 5 with POCl₃ gave the highly reactive 7-chloro derivative 10, which was reacted with amines, benzyl alcohol, and phenylboronic acid in the presence of Pd-catalyst to give the corresponding 7-substituted derivatives 11. Hydrolysis of the esters 5 and 11 followed by amidation gave the corresponding carboxamides 16a–h and 15. Regioselectivity of N-alkylation of 7-hydroxypyrazolo[1,5-a]pyrimidine-3-carboxylic acid derivatives 5 and 16 was tunable by the carboxy function. Alkylation of the secondary amides 16a–f furnished the 1-alkyl derivatives 17a–f, whereas the ester 5 and the tertiary amides 16g,h gave the 4-alkyl derivatives 14a–d and 16m,n, selectively.     

Structural properties and antibacterial potency of new supramolecular organotin(IV) dithiocarboxylates

A series of new organotin(IV) derivatives; Me₃SnL (1), Bu₃SnL (2), Ph₃SnL (3), Me₂SnClL (4), Bu₂SnClL (5), Ph₂SnClL (6), Et₂SnClL (7) and Et₂SnL₂ (8) where L = N-(2,3-dimethylphenyl)piperazine-1-carbodithioate have been synthesized and characterized by various analytical techniques. Among these techniques, ¹H and ¹³C NMR were carried out to asses solution structures whereas the solid state structures were confirmed by FT-IR and X-ray single crystal analysis (3, 5 and 8). Crystal structure of complex (3) and (5) showed distorted trigonal bipyramidal geometry and square pyramidal geometry, respectively. The inclination of the structure 5 towards square-pyramidal may be due to the presence of the Sn-Cl?HN-piperazine hydrogen bonds between the adjacent molecules. A supramolecular structure is shown by compound (8), with central tin atom exists in a distorted octahedral geometry. The antibacterial results indicated the profound activity of the compounds against various strains of bacteria. In addition to this, the triorganotin(IV) derivatives were found more active than diorganotin(IV) compounds.     

Effect of chain length on the formation of intramolecular and intermolecular products: Reaction of diols with cyclotriphosphazene

The reactions of cyclotriphosphazene, N₃P₃Cl₆ (1), in a 1:1.2 stoichiometry with the sodium derivative of seven diols [ethane- (2a), 1,3-propane- (2b), 1,4-butane- (2c), 1,5-pentane- (2d), 1,6-hexane- (2e), 1,8-octane- (2f) and 1,10-decane- (2g) diol] in THF solution at room temperature have been used to investigate the effect of chain length on the formation of reaction products. Although no new products were found for the reaction of 1 with diols 2a-c compared to those in the literature using other bases and solution conditions, the reactions of 1 with the diols 2d-g gave six different types of products, whose structures have been characterized by elemental analysis, mass spectrometry, ¹H and ³¹P NMR spectroscopy; ansa compounds N₃P₃Cl₄[O(CH₂)_nO], (5d-5g); single-bridged compounds N₃P₃Cl₅[O(CH₂)_nO]N₃P₃Cl₅(6d-6f); double-bridged compounds N₃P₃Cl₄[O(CH₂)_nO]₂N₃P₃Cl₄ (7d-7g, syn and anti) and triple-bridged compounds, N₃P₃Cl₃[O(CH₂)_nO]₃N₃P₃Cl₃ (8d-f). Where suitable single crystals were obtained, X-ray crystallographic studies confirmed the structures of two ansa compounds (5d and 5f), one single-bridged compound (6e), and five double-bridged compounds (meso-anti for 7d, 7e, 7f and meso-syn for 7d and 7f). ³¹P NMR measurements of the reaction mixtures were used to quantify the formation of products for the reactions 1 with all the diols, 2a-g; it is found that, with increasing chain length of the diol, there is a decrease in the products formed by intramolecular reactions (spiro and ansa derivatives) and a concomitant increase in the amounts of products formed by intermolecular reactions (single-, double- and triple-bridged derivatives) of cyclophosphazene.     

New Alq3 derivatives with efficient photoluminescence and electroluminescence properties for organic light-emitting diodes

Two new ligands prepared under solvent free conditions and five aluminum complexes derived from 8-hydroxyquinoline have been synthesized and characterized. The majority of the new aluminum tris(8-hydroxyquinoline) derivatives have nitrogen functionalities at position-4 of the quinolate ligand. The photoluminescence emission wavelengths of the new Alq₃ derivatives are shifted according to the electronic properties of the substituents at position-4. Results from differential scanning calorimetry (DSC) investigations of the new Alq₃ derivatives indicate that the complexes 9 and 10 are non crystalline and have higher transition glass temperatures than the parent Alq₃. The EL measurements of OLED devices with complexes 7, 9, and 10 as emitters revealed that complexes 7, 9, and 10 are efficient emitters in organic light emitting diodes.     

1,2,5-Thiadiazole 2-oxides: selective synthesis,structural characterization,and electrochemical properties

A new general procedure for the selective synthesis of 1,2,5-thiadiazole 2-oxides (including fused derivatives) 8a,b,c,g,h from the reaction of vic-glyoximes with S₂Cl₂ and pyridine in acetonitrile was elaborated together with general procedure for the synthesis of 1,2,5-thiadiazoles 7a–i, 10, 12, and 14 from the same starting materials and reagents. Molecular structures of 3,4-dimethyl-1,2,5-thiadiazole 2-oxide 8a and [1,2,5]thiadiazolo[3,4-b]quinoxaline 10 were confirmed by single-crystal X-ray diffraction. Electrochemical properties of 1,2,5-thiadiazole 2-oxides 8 were studied by cyclic voltammetry and different behavior was observed for monocyclic and benzo-fused derivatives. With compounds 8g and 17, previously unknown deoxygenation of 2,1,3-benzothiadiazole 1-oxides was discovered by electrochemical reduction, and resulted 2,1,3-benzothiadiazoles 7g and 19 were detected in the forms of their radical anions by EPR spectroscopy combined with DFT calculations.     

Preparation and characterization of rhenium (I) tricarbonyl dithiocarbamate compounds; Re(CO)3(S2CNMe2)(L)

The title compounds were prepared in good yield by treatment of Re(CO)₅Cl or [Re(CO)₃(H₂O)₃]Br with sodium dimethyldithiocarbamate hydrate (NaS₂CNMe₂·H₂O) and a neutral ligand yielding eight Re(CO)₃(S₂CNMe₂)(L) derivatives: L = NH₃1, pyridine (py) 2, imidazole (im) 3, pyrazole (pz) 4, triphenylphospine (PPh₃) 5, 1,3,5-triaza-7-phosphaadamantane (PTA) 6, t-butyl isocyanide (t-BuNC) 7, and cyclohexyl isocyanide (CyNC) 8. The resulting new complexes were characterized by ¹H and ¹³C NMR and infrared spectroscopy. Each was also structurally elucidated by X-ray crystallography. General structural features in all eight compounds were similar. The orientation of the three single-faced ligands, py, im and pz, demonstrates an interaction with the filled π orbital of the dithiocarbamate. Compounds were tested for stability under conditions that mimic physiological conditions; 1-4 quickly decomposed, 7 and 8 decomposed over 24 h while 5 and 6 were stable.     

Synthesis and properties of bis(heteroazulen-3-yl)methyl cations and bis(heteroazulen-3-yl)ketones

The synthesis and properties of a novel type of bis(heteroazulen-3-yl)methyl cations, bis(2-oxo-2H-cyclohepta[b]furan-3-yl)methyl cation salt and nitrogen analogues, (9a-c·PF₆⁻) and (9a-c·BF₄⁻), as well as bis(heteroazulen-3-yl)ketones (12a-d) are studied. The synthetic method was based on a TFA-catalyzed electrophilic aromatic substitution on the heteroazulenes (6a-d) with paraformaldehyde to afford the corresponding disubstituted methane derivatives 7a-d, followed by oxidative hydrogen abstraction with DDQ, and subsequent exchange of the counter-anion by using aq. HPF₆ or aq. HBF₄. In addition, the reaction of 7a-d with 2.2 equiv. amounts of DDQ afforded carbonyl compounds 12a-d. The delocalization of the positive charge of 9a-c was evaluated by the ¹H and ¹³C NMR spectral data. The thermodynamic stability of cations 9a-c was evaluated to be in the order 9a<9b<9c on the basis of their reduction potentials measured by cyclic voltammetry (CV) and pK_R+ values (2.6-10.3) obtained spectrophotometrically. The reduction waves of cations 9a-c were irreversible, suggesting the dimerization of the radical species generated by one-electron reduction. This was demonstrated by the reduction of 9a·BF₄⁻ with Zn powder to give dimerized product 14a. In addition, the quenching of 9a·BF₄⁻ with MeOH/NaHCO₃ gives ether derivative 15a, which is proposed for the precursor for synthesizing tris(heteroazulene)-substituted methyl cations bearing two different heteroazulene-units.