Fluorinated phosphorus compounds: Part 7. The reactions of bis(fluoroalkyl) phosphorochloridates with nitrogen nucleophiles

Forty bis(fluoroalkyl) phosphoramidates (R_FO)₂P(O)R were prepared in 10-91% yield by treating phosphorochloridates (R_FO)₂P(O)Cl where R_F was HCF₂CH₂, HCF₂CF₂CH₂, HCF₂CF₂CF₂CF₂CH₂, CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂, (CF₃)₂CH, (FCH₂)₂CH and (CH₃)₂CF₃C with nucleophiles HR, where R was NH₂, NHMe, NMe₂, NHEt and NEt₂ in diethyl ether at 0-5 °C. The bulky chloridate [(CH₃)₂CF₃CO]₂P(O)Cl reacted with ammonia, methylamine, dimethylamine and ethylamine, but not with diethylamine—even on heating in the presence of 4-dimethylaminopyridine—due to steric hindrance at phosphorus. Fluorinated phosphoramidates have lower basicity and nucleophilicity than their unfluorinated counterparts: (EtO)₂P(O)NH₂ is more easily hydrolysed by HCl than (CF₃CH₂O)₂P(O)NH₂ and whereas, (EtO)₂P(O)NH₂ is known to react with oxalyl chloride and thionyl chloride to give (EtO)₂P(O)NCO and (EtO)₂P(O)NSO respectively, (CF₃CH₂O)₂P(O)NH₂ reacted only with oxalyl chloride to give (CF₃CH₂O)₂P(O)NCO in 10% yield. Two other new fluorinated species, (CF₃CH₂O)₂P(O)NHOMe and (CF₃CH₂O)₂P(O)N₃, were prepared by nucleophilic substitution of bis(trifluoroethyl) phosphorochloridate with methoxyamine and azide ion.     

Fluorinated phosphorus compounds: Part 6. The synthesis of bis(fluoroalkyl) phosphites and bis(fluoroalkyl) phosphorohalidates

Reaction of phosphorus trichloride with tert-butanol and fluoroalcohols gave bis(fluoroalkyl) phosphites (R_FO)₂P(O)H in 42-89% yield, where R_F=HCF₂CH₂, H(CF₂)₂CH₂, H(CF₂)₄CH₂, CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂, (CF₃)₂CH, (FCH₂)₂CH, CF₃(CH₃)₂C, (CF₃)₂CH₃C, CF₃CH₂CH₂, C₄F₉CH₂CH₂ and C₆F₁₃CH₂CH₂. Treatment of these with chlorine in dichloromethane gave the bis(fluoroalkyl) phosphorochloridates (R_FO)₂P(O)Cl in 49-96% yield. The chloridate (CF₃CH₂O)₂P(O)Cl was isolated in much lower yield from the interaction of thionyl chloride with bis(trifluoroethyl) phosphite. Heating the latter in dichloromethane with potassium fluoride and a catalytic amount of trifluoroacetic acid gave the corresponding fluoridate (CF₃CH₂O)₂P(O)F in 84% yield. Treatment of bis(trifluoroethyl) phosphite with bromine or iodine gave the bromidate (CF₃CH₂O)₂P(O)Br and iodidate (CF₃CH₂O)₂P(O)I in 51 and 46% yield, respectively. The iodidate is the first dialkyl phosphoroiodidate to have been isolated and characterised properly—its discovery lags behind the first isolation of a dialkyl phosphorochloridate by over 130 years. The fluoroalkyl phosphoryl compounds are generally more stable than known unfluorinated counterparts.     

Fluorinated phosphorus compounds: Part 10. Bis(fluoroalkyl) S-alkyl phosphorothiolates and tris(fluoroalkyl) phosphorothionates

Treatment of bis(fluoroalkyl) phosphites (R_FCH₂O)₂P(O)H, where R_F was CF₃ or C₂F₅ with sulfur in pyridine at 80 °C gave salts of structure [(R_FCH₂O)₂P(O)SH]NC₅H₅ in 90 and 88% yield, respectively. The salts reacted with alkyl iodides in acetonitrile at 50 °C to furnish bis(fluoroalkyl) S-alkyl phosphorothiolates (R_FCH₂O)₂P(O)SR, where R was Me, Et, n- and i-Pr (when R_F = CF₃) and Me (when R_F = C₂F₅). Yields ranged from 21 to 57%. Bis(trifluoroethyl) S-methyl phosphorothiolate (CF₃CH₂O)₂P(O)SMe underwent fluorination by silver(I) fluoride in acetonitrile at room temperature to yield the phosphorofluoridate (CF₃CH₂O)₂P(O)F in 75% yield. Tris(fluoroalkyl) phosphorothionates (R_FCH₂O)₃P = S, where R_F was CF₃, C₂F₅ and C₃F₇, were prepared in 30-34% yield by heating the tris(fluoroalkyl) phosphites (R_FCH₂O)₃P and sulfur to 200 °C in a sealed tube for 8 h.     

Fluorinated phosphorus compounds: Part 11. The reactions of some fluorinated amines with dialkyl and bis(fluoroalkyl) phosphorochloridates

Dimethyl phosphorochloridate reacted with R_FCH₂NH₂ in ether in the presence of Et₃N to afford (MeO)₂P(O)NHCH₂R_F, where R_F = CF₃ and C₂F₅, in 39 and 47% yield, respectively. Similar reactions with di-n-propyl and diisopropyl phosphorochloridates could be effected only with H₂NCH₂CF₃ when 4-dimethylaminopyridine catalyst was added and (n-PrO)₂P(O)NHCH₂CF₃ and (i-PrO)₂P(O)NHCH₂CF₃ were isolated in 49 and 25% yield, respectively. Treatment of POCl₃ with one molar equivalent each of H₂NCH₂CF₃ and Et₃N permitted the synthesis of Cl₂P(O)NHCH₂CF₃ in 43% yield. Bis(fluoroalkyl) phosphorochloridates (R_FO)₂P(O)Cl, where R_F = C₂F₅CH₂, C₃F₇CH₂ and (CF₃)₂CH, reacted with 2,2,2-trifluoroethylamine and 2,2,3,3,3-pentafluoropropylamine to furnish phosphoramidates (R_FO)₂P(O)NHCH₂R, where R = CF₃ or C₂F₅, in yields of 32-67%.     

Fluorinated phosphorus compounds: Part 8. The reactions of bis(fluoroalkyl) phosphorochloridates with sulfur nucleophiles

The reactivity of bis(fluoroalkyl) phosphorochloridates to nucleophiles is summarised. Previous data and the results described here indicate that reactivities decrease in the order: amines>alcohols>thiols. The synthesis of CF₃CH₂OP(O)(SEt)₂ in 30% yield was accomplished by treating CF₃CH₂OP(O)Cl₂ with two molar equivalents of EtSH and Et₃N in ether. The chloridates (CF₃CH₂O)₂P(O)Cl and (C₂F₅CH₂O)₂P(O)Cl did not react with MeSH in ether at −78 °C or when heated with Pb(SMe)₂ in benzene. Ethanethiol and propanethiol reacted with fluorinated chloridates in the presence of triethylamine to give thiolates (R_FO)₂P(O)SR in 13-41% yield where R_F was CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂ or (CF₃)₂CH and R was Et or n-Pr. Similarly, reaction of phosphorobromidates (R_FCH₂O)₂P(O)Br, made by brominating the corresponding bis(fluoroalkyl) H-phosphonates, with benzenethiol gave derivatives (R_FCH₂O)₂P(O)SPh in 43 and 46% yield where R_F was CF₃ and C₂F₅, respectively. Treatment of the chloridothiolate Cl(EtO)P(O)SMe, prepared in two steps from triethyl phosphite, with fluoroalcohols and triethylamine in ether gave species R_FO(EtO)P(O)SMe in 62-74% yield where R_F was CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂ or (CF₃)₂CH. The reactions of bis(trifluoroethyl) phosphorochloridate with 2-mercaptoethanol, 3-mercaptopropanol and ethane-1,2-dithiol gave several unexpected products whose structures were tentatively assigned.     

First examples of stable polyfluorinated bis- and tris-(alkoxy)methyl cations

Stable polyfluorinated bis- and tris-(alkoxy)methyl cations were prepared by the reaction of the corresponding difluoroformals (R_fO)₂CF₂ (R_f = -CH₂CF₃, -CH(CF₃)₂, -CH₂CF₂Cl) with an excess of SbF₅. Although the cation (CF₃CH₂O)₂CF⁺ (1a) is stable at ambient temperature, the chlorinated analog (ClCF₂CH₂O)₂CF⁺ (3a) can be generated only at low temperature in SO₂ClF solvent and rapidly decomposes at ambient temperature. Although the salt [(CF₃)₂CHO]₂CF⁺Sb_nF_5n+1⁻ (2a) is slightly more stable than the salt of cation 3a, at ambient temperature it undergoes rapid disproportionation with formation of equal amounts of [(CF₃)₂CHO]₃C⁺Sb_nF_5n+1⁻ (2b) and CF₃OCH(CF₃)₂ (2c). Stable solid salt 2b (n = 2) was isolated and fully characterized by ¹H, ¹⁹F and ¹³C NMR spectroscopy and its structure was confirmed by single crystal X-ray diffraction.     

Bis(fluoroalkyl)acrylic and methacrylic phosphate monomers, their polymers and some of their properties

Ten fluoromonomers of structure (R_FO)₂P(O)OCH₂CH₂OC(O)CRCH₂ were made in 30-64% yield by treating the chloridates (R_FO)₂P(O)Cl with HOCH₂CH₂OC(O)CRCH₂ in chloroform in the presence of triethylamine [R_F=CF₃CH₂, C₂F₅CH₂, C₃F₇CH₂, C₄F₉CH₂, C₄F₉CH₂CH₂ or C₆F₁₃CH₂CH₂; R  H or Me]. The chloromonomer (CCl₃CH₂O)₂P(O)OCH₂CH₂OC(O)CHCH₂ was obtained analogously in 29% yield. Polymerisation of the acrylate monomers, but not the methacrylate monomers, could be effected using α-azoisobutyronitrile as a radical initiator. Acrylic polymers having CF₃CH₂O, CCl₃CH₂O and C₆F₁₃CH₂CH₂O side-chains were obtained as translucent rubbers. Specimens of cotton fabric were treated with solutions of the polymers, and average water and oil repellency ratings measured. Fabric coated with the polymer with the C₆F₁₃CH₂CH₂O side-chain afforded protection from penetration of the test liquids. Treated fabrics were subjected to the limiting oxygen index (LOI) test according to BS EN ISO 4589-2 (1999): this test determines the point at which a material just burns in a volumetric flow of oxygen and nitrogen. The treated fabrics were more fire-resistant (LOI 22-29%) than the untreated fabric (LOI 18%). Fabric coated with the CCl₃CH₂O-based polymer can be considered fire-retardant (LOI 29%). The fluoromonomers were tested for anti-acetylcholinesterase activity and were found to be poor enzyme inhibitors; they are predicted to possess low acute toxicity.     

The steric and electronic effects of aliphatic fluoroalkyl groups

Ab initio calculations were performed on 18 fluorinated and unfluorinated alcohols at the B3LYP and HF levels with the 6-311G^∗∗ basis set. Molar volumes of the alcohols were computed at each level and averaged to produce a scale of relative size. From this, various isosteric replacements of potential use in drug design were suggested: ethyl by FCH₂CH₂ or HCF₂CH₂, propyl by CF₃CH₂, isopropyl by CF₃(CH₃)CH or (FCH₂)₂CH, isobutyl or t-butyl by (CF₃)₂CH, and 3-methyl-2-butyl by CF₃(CH₃)₂C. Calculation of the charge on oxygen and the Wiberg index of the CO bond allowed an electronegativity scale to be constructed for the fluoroalkyl groups. Electronegativity decreased in the order: (CF₃)₃C>(CF₃)₂CH>C₂F₅CH₂>CF₃CH₂>CH₃(CF₃)₂C>HCF₂CH₂>CF₃(CH₃)CH>(FCH₂)₂CH>FCH₂CH₂>CF₃(CH₃)₂C. This ranking agreed with literature acid dissociation data for the alcohols studied.     

New types of asymmetrical bromonium salts [RF(RF′)Br]Y where RF and/or RF′ represent perfluorinated aryl, alkenyl, and alkynyl groups

A series of previously unknown asymmetrical fluorinated bis(aryl)bromonium, alkenyl(aryl)bromonium, and alkynyl(aryl)bromonium salts was prepared by reactions of C₆F₅BrF₂ or 4-CF₃C₆H₄BrF₂ with aryl group transfer reagents Ar′SiF₃ (Ar′ = C₆F₅, 4-FC₆H₄, C₆H₅) or perfluoroorganyl group transfer reagents R_F′BF₂ (R_F = C₆F₅, trans-CF₃CFCF, C₃F₇C≡C) preferentially in weakly coordinating solvents (CCl₃F, CCl₂FCClF₂, CH₂Cl₂, CF₃CH₂CHF₂ (PFP), CF₃CH₂CF₂CH₃ (PFB)). The presence of the base MeCN and the influence of the adducts R_F′BF₂·NCMe (R_F = C₆F₅, CF₃C≡C) on reactions aside to bromonium salt formation are discussed. Reactions of C₆F₅BrF₂ with Alk_F′BF₂ in PFP gave mainly C₆F₅Br and Alk_F′F (Alk_F′ = C₆F₁₃, C₆F₁₃CH₂CH₂), presumably, deriving from the unstable salts [C₆F₅(Alk_F′)Br]Y (Y = [Alk_F′BF₃]⁻). Prototypical reactivities of selected bromonium salts were investigated with the nucleophile I^-and the electrophile H⁺. [4-CF₃C₆H₄(C₆F₅)Br][BF₄] showed the conversion into 4-CF₃C₆H₄Br and C₆F₅I when reacted with [Bu₄N]I in MeCN. Perfluoroalkynylbromonium salts [C_nF_2n+1C≡C(R_F)Br][BF₄] slowly added HF when dissolved in aHF and formed [Z-C_nF_2n+1CFCH(R_F)Br][BF₄].     

New partially fluorinated epoxides by oxidation of olefins with sodium hypohalites under phase transfer catalysis

Partially fluorinated epoxides can be readily prepared by oxidation of the corresponding olefins by NaOCl (or NaOBr) under phase transfer catalysis (PTC) conditions. Oxidation of CH₂C(CF₃)₂ at 0-5 °C leads to the formation of 2,2-bis(trifluoromethyl)oxirane in 65-75% yield. (CF₃)₂CCHCH₂X (X=Cl or Br) were converted into the corresponding epoxides in 24-31% yield by the action of NaOCl and NaOBr, respectively. Baylis-Hillman adducts of fluorinated ketones and esters of acrylic acid CH₂C[C(OH)(CF₂X)Y][C(O)OR] [X=F or Cl, Y=CF₃, CF₂Cl or C(O)OCH₃ and R=CH₃ or C(CH₃)₃] were converted into α-hydroxyepoxides in 47-84% yield under action of NaOCl in the presence of PT catalyst. Oxidation of tert-butyl ester of α-trifluoromethylacrylic acid by NaOCl rapidly proceeds at ambient temperature with formation of epoxide in 75% yield. Oxidation of (C₂F₅)₂CCHC₃F₇ results in the high yield formation of trisubstituted epoxide.     

Synthesis,structure and reactivity of novel palladiumdichloride-2,2′-bipyridine with 4,4′-bis(fluorous-ponytail)

With the readily available fluorous alkanols R_fCH₂OH, a series of novel fluorous-ponytailed bpy ligands, 4,4′-bis(R_fCH₂OCH₂)-2,2′-bpy (1a–e), were prepared and treated with [PdCl₂(CH₃CN)₂] to result in the corresponding novel Pd complexes [PdCl₂(4,4′-bis(R_fCH₂OCH₂)-2,2′-bpy)] (2a–e) where R_f = n-C₃F₇ (a), HCF₂(CF₂)₃ (b), HCF₂(CF₂)₇ (c), n-C₈F₁₇ (d), n-C₁₀F₂₁ (e). The new ligands and Pd complexes were spectroscopically characterized by multi-nuclei NMR (¹H, ¹⁹F and ¹³C), FTIR and high resolution mass (FAB). The structure for the Pd complex 2b, the first with fluorinated ponytails on bpy and not on phosphine, was also established by a single crystal X-ray diffraction study. The TGA data of both ligands and Pd complexes indicated that the Pd-complexes were resistant to higher temperatures than the corresponding ligands. The Pd catalysts derived from 2a–c showed an almost quantitative conversion and could be reused for eight runs with Heck reactions, in that the products and unspent reactants were directly removed by distillation. With the highest fluorine content in the series, Pd complex 2e was successfully applied in the Heck reaction using the fluorous biphasic catalysis strategy.     

On the reactions of dimethylsulfoxide with acyl fluorides - pummerer rearrangements and formation of monofluoromethyl esters

In stoichiometry-dependent reactions, dimethylsulfoxide (DMSO) reacts with acyl fluorides, R_fC(O)F (R_f = F, CF₃), to yield CH₃SCH₂F and R_fC(O)OCH₂F, while CH₃SCH₂Cl and FC(O)OCH₂Cl are obtained with COClF. Oxalyl difluoride, C₂O₂F₂, reacts with DMSO to give CH₃SCH₂F and FCH₂OCH₂F.     

Bis(perfluoroorganyl)bromonium salts [(RF)2Br]Y (RF = aryl, alkenyl, and alkynyl)

Bromonium salts [(R_F)₂Br]Y with perfluorinated groups R_FC₆F₅, CF₃CFCF, C₂F₅CFCF, and CF₃C≡C were isolated from reactions of BrF₃ with R_FBF₂ in weakly coordinating solvents (wcs) like CF₃CH₂CHF₂ (PFP) or CF₃CH₂CF₂CH₃ (PFB) in 30-90% yields. C₆F₅BF₂ formed independent of the stoichiometry only [(C₆F₅)₂Br][BF₄]. 1:2 reactions of BrF₃ and silanes C₆F₅SiY₃ (Y = F, Me) ended with different products - C₆F₅BrF₂ or [(C₆F₅)₂Br][SiF₅] - as pure individuals, depending on Y and on the reaction temperature (Y = F). With C₆F₅SiF₃ at ≥−30 °C [(C₆F₅)₂Br][SiF₅] resulted in 92% yield whereas the reaction with less Lewis acidic C₆F₅SiMe₃ only led to C₆F₅BrF₂ (58%). The interaction of K[C₆F₅BF₃] with BrF₃ or [BrF₂][SbF₆] in anhydrous HF gave [(C₆F₅)₂Br][SbF₆]. Attempts to obtain a bis(perfluoroalkyl)bromonium salt by reactions of C₆F₁₃BF₂ with BrF₃ or of K[C₆F₁₃BF₃] with [BrF₂][SbF₆] failed. The 3:2 reactions of BrF₃ with (C₆F₅)₃B in CH₂Cl₂ gave [(C₆F₅)₂Br][(C₆F₅)_nBF_4−n] salts (n = 0-3). The mixture of anions could be converted to pure [BF₄]⁻ salts by treatment with BF₃·base.     

Synthesis,structure and spectroelectrochemical property of (2,2′-bipyridine)–metal (M = Pt,Pd) dichloride with 4,4′-bis(fluorous-ponytail) on bipyridine

The 4,4′-bis(R_fCH₂OCH₂)-2,2′-bpy ligands [R_f = n-C₃F₇ (1a), HCF₂(CF₂)₃ (1b)] were prepared and then treated with [MCl₂(CH₃CN)₂] (M = Pt or Pd) to result in the corresponding metal complexes, [MCl₂(4,4′-bis(R_fCH₂OCH₂)-2,2′-bpy)] (M = Pt 2a–b; Pd 3a–b). Both ligands and metal complexes were fully characterized by multi-nuclei NMR (¹H, ¹⁹F and ¹³C), FTIR, and mass (GC/MS or HR-FAB) methods. The X-ray structures of 2a–b and 3a–b were studied. With terminal CF₃, the structures of 2a and 3a exhibit disordered polyfluorinated regions in solid state. With terminal HCF₂, the structures of 2b and 3b show a π–π stacking of the bpy planes, five-membered C–H···O hydrogen bond and an unusual intramolecular blue-shifting C–H···F–C hydrogen bond system, whereas without terminal HCF₂, the structures of 2a and 3a show the similar π–π stacking, five-membered C–H···O hydrogen bond and typical orientation of polyfluorinated ponytails, but not the C–H···F–C hydrogen bond system. The CV and UV/Vis studies were also carried out.     

Copper complexes with 1,10-phenanthrolines tethered to a cyclotriphosphazene platform

The synthesis of two ligands, L¹ and L², each containing two 2-oxy-1,10-phenanthroline moieties attached to the same phosphorus atom of a substituted cyclotriphosphazene ring via an oxy-bridge, but differing in substitution on the biphenyl capping groups, is described. The single-crystal X-ray structure of L¹ · 2CH₂Cl₂ shows an ordered structure in the lattice with channels, containing dichloromethane molecules, running parallel to the a-axis. The reactions of L¹ and L² with [Cu(MeCN)₄](PF₆) afford the dimetallic copper(I) derivatives, [(CuL¹)₂] (PF₆)₂ · CH₂Cl₂ and [(CuL²)₂](PF₆)₂. The single-crystal X-ray structure of the former complex shows that the L¹ ligands of the cation [(CuL¹)₂]²⁺ act as a bridges coordinating to the two copper(I) centres in a helical fashion. The copper atoms have distorted tetrahedral geometries with the interligand dihedral angle being 85°. With copper(II) chloride and copper(II) perchlorate, the monomeric copper(II) complexes, [CuL¹Cl]Cl · 2CH₂Cl₂, [CuL²Cl]Cl · CH₂Cl₂, [CuL¹(OMe)]PF₆ · 2H₂O, [CuL²(OMe)]PF₆ · 2H₂O, [CuL¹(OH₂)](ClO₄)₂ and [CuL²(OH₂)](ClO₄)₂ · H₂O are obtained. The single-crystal X-ray structure of [CuL¹Cl]Cl · 2CH₂Cl₂ shows the copper to be in a square-base pyramidal distorted trigonal-bipyramidal (SBPDTB) environment (τ = 0.57) with L¹ acting as a κ⁴N donor, coordinating via the four nitrogen atoms of the two tethered 1,10-phenanthrolines. In CH₃CN, this complex undergoes hydrolysis via the presence of adventitious water losing one oxyphenanthroline arm to form the centrosymmetric dimetallic species, [(CuL³Cl)₂] · 4CH₃CN · 3H₂O (L³ = [N₃P₃(biph)₂(ophen)O]⁻ where biph = 2,2′-dioxybiphenyl and O replaces an oxyphenanthroline and is attached to the phosphorus of the phosphazene ring). The two monomeric units, which are linked by bridging chlorine atoms, have a distorted square-based pyramidal geometry about the copper with the basal plane made by the ‘ON₂Cl’ ligand set. Spectroscopic (mass spectral, electronic and ESR) and magnetic moment data for the complexes are discussed.     

Novel perfluoroalkylated oligo(oxyethylene) methyl ethers with high hemocompatibility and excellent co-emulsifying properties for potential biomedical uses

Two series of novel perfluoroalkylated amphiphilic compounds were synthesized from monomethyl ethers of mono-, di- and tri-(oxyethylene) glycols. The first series CH₃(OCH₂CH₂)_nOCH₂CH(OH)CH₂-CF₂(CF₂CF₂)_nCF₃ (n = 1-3) bearing the hydroxy group at the spacer between hydrophilic and hydrophobic parts was prepared by the reactions of the monomethyl ethers with 2-(perfluoroalkylmethyl)oxiranes in 76-97% yields. The second series CH₃(OCH₂CH₂)_nOCH₂CH₂CH₂-CF₂(CF₂CF₂)_nCF₃ (n = 1-3) possessing the non-hydroxylated spacer was synthesized from allyl methyl ethers of oligo(oxyethylene) glycols using radical additions of perfluoroalkyl iodides and subsequent selective reductions of the C-I bond in the adducts in overall yields of 23-69%. Some of the novel amphiphilic compounds displayed very low hemolytic activity to erythrocytes and excellent co-emulsifying properties on testing on perfluorodecalin/Pluronic F-68 microemulsions. 1-O-(2-Hydroxy-4,4,5,5,6,6,7,7,8,8,9,9,9-tridecafluorononyl)-d-xylitol was prepared by a novelized synthesis and employed as a standard compound in the testing.     

Reactions of 2,2-bis(trifluoromethyl)oxirane with alcohols under phase transfer catalysis

It was demonstrated that the reaction of 2,2-bis(trifluoromethyl)oxirane (1) with variety of alcohols could be successfully carried out under phase transfer catalysis conditions using sodium or potassium hydroxide as a base. For example, reaction of CH₃OH, C₂H₅OCH₂CH₂OH, HOCH₂CH₂OH with one or two moles of 1 in the presence of the catalyst [(C₄H₉)₄N⁺HSO₄⁻] gives the corresponding tertiary alcohols R[OCH₂C(CF₃)₂OH]_n (n=1 or 2) in 43-53% yield, along with some O[CH₂C(CF₃)₂OH]₂. Benzyl alcohol and phenol under similar conditions are less active, producing in the reaction with 1 the corresponding adducts ArOCH₂C(CF₃)₂OH in 31-35% yield. Fluorinated alcohols, such as CF₃CH₂OH, ClCF₂CH₂OH, HCF₂CF₂CH₂OH have much higher reactivity towards 1 giving ring opening products in 82-97% yield. Even in the reaction of hindered hexafluoro-iso-propanol the corresponding adduct was isolated in 43% yield. Surprisingly, the reaction of iso-propanol and epoxide 1, results in the formation of O[CH₂C(CF₃)₂OH]₂ as a major product, isolated in 56% yield. Possible mechanism for the formation of the last product was proposed.     

New mono- and binuclear Pd(II) complexes containing 1,2,4-triazole moieties

The reaction of AMTT (AMTT = 4-amino-3-methyl-1,2,4-triazol-5-thione, HL1) with palladium(II) chloride and triphenylphosphane as a co-ligand in acetonitrile afforded the mononuclear Pd^II-complex [(PPh₃)Pd(HL1)Cl]Cl·2CH₃CN (1). The complex [(PPh₃)Pd(HL1)I]Cl·1/2H₂O (2) was prepared via halogen exchange between 1 and sodium iodide in methanol/acetonitrile. The first binuclear palladium(II) complex containing singly deprotonated HL1, [(PPh₃)₂ClPd(L1)Pd(PPh₃)Cl]Cl·1/3H₂O·CH₃OH (3), was prepared by the reaction of HL1 with palladium(II) chloride and triphenylphosphane in the presence of sodium acetate in methanol.     

Synthesis of novel lipophilic and/or fluorophilic ethers of perfluoro-tert-butyl alcohol, perfluoropinacol and hexafluoroacetone hydrate via a Mitsunobu reaction: Typical cases of ideal product separation

Fluorophilic ethers having the structure RC(CF₃)₂O(CH₂)₃C_nF_2n + 1 are obtained in high yields, when F-tert-butyl alcohol (R = CF₃), F-acetone hydrate (R = O(CH₂)₃C_nF_2n + 1), F-pinacol (R = C(CF₃)₂O(CH₂)₃C_nF_2n + 1) are reacted with 3-perfluoroalkyl-1-propanols (C_nF_2n + 1(CH₂)₃OH, n = 4, 6, 8, 10) in a Mitsunobu reaction (Ph₃P/DIAD [i-PrO₂CN = NCO₂Pr-i]/ether). The parent lipophilic ethers with the structure of (CF₃)₃CO(CH₂)₃C_nH_2n + 1 were prepared analogously using the corresponding fatty alcohols and F-tert-butyl alcohol. To achieve ideal separations, products were transferred to orthogonal phases relative to the other reaction components using fluorous extraction, fluorous solid-organic liquid filtration, or steam-distillation. Selected physical properties including melting and boiling point, together with fluorous partition coefficients of these ethers were determined and the figures obtained were qualitatively analyzed using relevant thermodynamic theories. Some of these ethers are liquids with rather low freezing points and are miscible with fluorocarbon solvents.     

Novel generation ponytails in fluorous chemistry: Syntheses of primary, secondary, and tertiary (nonafluoro-tert-butyloxy)ethyl amines

(Nonafluoro-tert-butyloxy)ethyl tosylate 4 was prepared in 65% yield from nonafluoro-tert-butanol 1 using commercially available reagents. Further reaction of 4 with HNR¹R² (R¹ = R² = H, CH₃; R¹ = H, R² = CH₃, (CH₂)₃C₈F₁₇, CH₂CH₂OC(CF₃)₃) affords the appropriate (CF₃)₃COCH₂CH₂NR¹R² amines in 20-69% yields. Improved overall yields of [(CF₃)₃COCH₂CH₂]_3−nNR_n to 1 were obtained by the reaction of (CF₃)₃CONa 2 and (XCH₂CH₂)_3−nNR_n (X = Cl, n = 0, 1, 2, R = CH₃; X = CH₃SO₂O, n = 1, R = CH₃SO₂) nitrogen mustards and a similar reactive β-substituted ethyl amine. The title amines are mobile colorless liquids and volatile with steam. The bulky fluorous ponytail (CF₃)₃CO(CH₂)₂ displays high acidic stability and increases fluorous character almost as much as the classical straight-chain C₈F₁₇(CH₂)₃ ponytail.