Novelties of solid-liquid phase transfer catalysed synthesis of p-toluenesulfonyl fluoride from p-toluenesulfonyl chloride

Organic sulfonyl fluorides are of interest owing to their insecticidal, germicidal and enzyme inhibitory properties. In the current work, synthesis of p-toluenesufonyl fluoride was accomplished by reacting p-toluenesulfonyl chloride with solid potassium fluoride using PEG-400 as a catalyst under solid-liquid phase transfer catalysis (S-L PTC) at 30 °C. p-Toluenesulfonyl fluoride is used as peroxygen bleach activator. It also finds use in the treatment of Alzheimer's disease. The mechanism is based on homogeneous solubilization of solid. PEG forms a complex with metal cation which associates with the nucleophile and it participates in SN₂ type reactions. The reaction is intrinsically kinetically controlled. A complete theoretical analysis is done to determine both the rate constant and equilibrium constant from the same set of data. The activation energy and Gibbs free energy are also calculated.     

Suzuki-Miyaura monocouplings of p-dibromobiphenyl and substituted p-dibromo(penta-p-phenylenes)

The mono/bis ratio for the Suzuki-Miyaura cross coupling of p-dibromobiphenyl and p-dibromo(penta-p-phenylenes) with arylboronic acids and esters has been studied. The coupling reaction is demonstrated to be highly selective for monoarylation when the substrate is a p-dibromooligoarene, while selective biarylation is obtained for p-diiodoterphenyl. The mono/bis coupling-ratio for these compounds was highly sensitive to the nature of the halogen involved, however steric hindrance or electronic characteristics of the boronic derivative did not affect the selectivity of the reaction. The reaction yields observed were higher at room temperature and when arylboronic pinacol esters were used. These reactions also offer a useful method for the preparation of asymmetrically substituted terphenyls and hexa-p-phenylenes, giving good yields.     

Experimental studies on the ring opening polymerization of p-dioxanone using an Al(OPr)3-monosaccharide initiator system

The ring opening polymerization (ROP) of p-dioxanone using a protected monosaccharide (1,2;3,4-di-O-isopropylidene-α-d-galactopyranose)/Al(OⁱPr)₃ initiator system to yield polydioxanone with a protected monosaccharide end-group is described. The products were synthesized at 60-100 °C and characterized by ¹H and ¹³C NMR, and MALDI-TOF mass spectrometry. Besides the desired polydioxanone functionalised with a monosaccharide end-group, also polydioxanone with an OⁱPr end-group was formed (20-30%). Systematic studies showed that the polymer yield is a function of the reaction temperature and the reaction time, with higher temperatures (100 °C) leading to lower yields. The average chain length of the polymers is between 7 and 58 repeating units and may be tuned by the monomer to monosaccharide ratio (at constant Al(OⁱPr)₃ intake). A statistical model has been developed that successfully describes the experimentally observed relation between the average chain length of the functionalized polymer and reaction parameters.     

Uptake of weathered p,p′-DDE by plant species effective at accumulating soil elements

Ten plant species previously shown to accumulate inorganic elements effectively from natural solids were grown under field conditions in p,p′-dichlorodiphenyldichloroethane (p,p′-DDE) contaminated soil. The plant species, which included rye, mustard, canola, vetch, pigeonpea, clover, peanut, and 3 cultivars of white lupin, represented both monocots and dicots, as well as two major families within the dicots: the Brassicaceae and the Fabaceae. The plants varied widely in their ability to phytoextract and translocate weathered p,p′-DDE. The percentage of contaminant phytoextracted ranged from 0.06% (white lupin) to 0.22% (clover, vetch), and the translocation factors (TF; contaminant concentration ratio of stems to roots) ranged from 0.04 (clover, white lupin) to 0.37 (canola). An inverse relationship exists between the amount of contaminant in the roots as measured by the root BCF (bioconcentration factor; dry weight contaminant concentration ratio of root to soil) and the TF. Duplicate mounds of each species were periodically amended with nitrogen (N), phosphorus (P), nitrogen and phosphorus together (N/P); a minus phosphorus treatment involved the addition of AlSO₄ to the soil prior to planting. The effect of nutrient regime on plant biomass, p,p′-DDE uptake and translocation, and inorganic element content varied greatly among the 10 plant species. For some species (rye, vetch, pigeonpea, clover, white lupin), reductions or non-significant changes in p,p′-DDE uptake were observed under the nutrient treatments and were not correlated with plant biomass effects. For mustard, canola, and peanut, the percentage of p,p′-DDE phytoextracted in the various treatments was more than doubled and was directly correlated with a two-fold increase in total plant biomass. Although it is generally assumed that fertilizer amendments will enhance the phytoremediation of organic and inorganic pollutants, the data here suggest that such effects are highly species specific and in some cases may actually decrease remediation potential.     

Vibration and X-ray photoelectron spectroscopies of FeCl3-doped poly(p-diethynylbenzene)

The doping mechanism of poly(p-diethynylbenzene), chemically doped with FeCl₃, was investigated. Absorption, infrared, far infrared, Raman, X-ray photoelectron spectroscopies were used to determine the nature of the dopant in doped polymer. The experimental results suggest that the charge transfer reaction between the polymer chain and the dopant results in the formation of FeCl₄⁻ species, the π electron charge delocalization along the polymeric chain and the reduction of π-π^* transition energy.     

Preparation and reactivity of p-cymene complexes of ruthenium and osmium incorporating 1,3-triazenide ligands

p-Cymene complexes MCl₂(η⁶-p-cymene)L [M = Ru, Os; L = P(OEt)₃, PPh(OEt)₂, (CH₃)₃CNC] were prepared by allowing [MCl(μ-Cl)(η⁶-p-cymene)]₂ to react with phosphites or tert-butyl isocyanide. Treatment of MCl₂(η⁶-p-cymene)L complexes with 1,3-ArNNN(H)Ar triazene and an excess of NEt₃ gave the cationic triazenide derivatives [M(η²-1,3-ArNNNAr)(η⁶-p-cymene)L]BPh₄ (Ar = Ph, p-tolyl). Neutral triazenide complexes MCl(η²-1,3-ArNNNAr)(η⁶-p-cymene) (M = Ru, Os) were also prepared by allowing [MCl(μ-Cl)(η⁶-p-cymene)]₂ to react with 1,3-diaryltriazene in the presence of triethylamine. p-Cymene complexes MCl₂(η⁶-p-cymene)L reacted with equimolar amounts of 1,3-ArNNN(H)Ar triazene to give both triazenide complexes [M(η²-1,3-ArNNNAr)(η⁶-p-cymene)L]BPh₄ and amine derivatives [MCl(ArNH₂)(η⁶-p-cymene)L]BPh₄. A reaction path for the formation of the amine complex is also reported. The complexes were characterised by spectroscopy and X-ray crystallography of RuCl₂(η⁶-p-cymene)[PPh(OEt)₂] and [Ru(η²-1,3-p-tolyl-NNN-p-tolyl)(η⁶-p-cymene){CNC(CH₃)₃}]BPh₄. Selected triazenide complexes were studied as catalysts in the hydrogenation of 2-cyclohexen-1-one and cinnamaldehyde.     

Synthesis, characterization, and OLED application of oligo(p-phenylene ethynylene)s with polyhedral oligomeric silsesquioxanes (POSS) as pendant groups

Two new classes of mono- and oligo(p-phenylene ethynylene)s grafted with polyhedral oligomeric silsesquioxanes (POSS) were synthesized via ‘click’ chemistry and palladium-catalyzed Sonogashira cross-coupling. These materials with cubic silsesquioxanes are very robust with excellent thermal stability in air (T_5%loss>330 °C) and exhibited T_g>80 °C. All the compounds showed high photoluminescence with a range of blue emission and quantum yield up to 80% in the solution. Extended π conjugation molecules of oligo-pPEs POSS maintain relatively high PL quantum efficiencies in the solid state, compared to mono-pPEs POSS. A preliminary report is made of some of the materials as multilayer OLED components with active dopants PVK and PBD.     

Fluorination of poly(p-phenylene) using TbF4 as fluorinating agent

The fluorination using TbF₄ as fluorinating agent was successfully performed on poly(p-phenylene). The method allows the fluorine content of the polymer to be controlled and the formation of structural defects, such as dangling bonds, to be significantly decreased by comparison with the direct fluorination using pure F₂ gas. The aromatic character of the phenyl ring is partly maintained through the fluorination contrary to the direct fluorination (using pure F₂ gas), for which a quasi-perfluorination and a partial decomposition of the polymer occur. Complementary analytical techniques have been used, such as ¹⁹F and ¹³C solid state NMR, FT-IR and EPR to compare the samples as a function of the reaction conditions.     

Synthesis of oligo(p-phenylene vinylene)-porphyrin-oligo(p-phenylene vinylene) triads as antenna molecules for energy transfer

The oligo(p-phenylene vinylene)-porphyrin-oligo(p-phenylene vinylene) (P-OPVn, n=2, 4, where n is the number of phenyl rings) and the complex with Zn²⁺ based on P-OPVn were synthesized for investigating their photophysical properties via UV-vis, voltammetry, steady-state and time-resolved fluorescence spectra. In these molecules two OPV moieties as energy donors were linked to porphyrin center by virtue of Wittig reaction. The detailed studies of photophysical properties indicate that OPV group can act as an antenna unit for effective intramolecular energy transfer.     

Porosity development in chars from thermal decomposition of poly(p-phenylene terephthalamide)

The main objective of this work was to investigate the development of porosity in solid residues from the thermal decomposition of the polymer, poly(p-phenylene terephthalamide) (PPTA). PPTA chars were prepared at different temperatures and characterized by X-ray diffraction and physical adsorption of CO₂ at 0 °C. The carbonization temperatures were selected on the basis of thermogravimetric analysis results. The effect of introducing an isothermal treatment at 500 °C on the characteristics of the resulting chars was also studied. It was found that this pre-treatment lowers the decomposition temperature of PPTA and yields a somewhat less ordered material than in the case of pyrolysis under a constant heating rate. The micropore volume increases with increasing heat treatment temperature for both series of samples. The mean micropore size decreases for the two series of chars until the 700-800 °C interval; above these temperatures, this evolution is reversed. The micropore volume of the samples submitted to the isothermal treatment is higher than when PPTA is treated under a constant heating rate. Likewise, the pore size distribution is more heterogeneous when the intermediate isothermal treatment at 500 °C is introduced during PPTA pyrolysis. Some differences between porosity development in chars from PPTA and other high thermal stability polymers were explained on the basis of different mechanistic features in polymer pyrolysis.     

Preparation of p-nitrocalix[n]arene methyl ethers via ipso-nitration and crystal structure of tetramethoxytetra-p-nitrocalix[4]arene

Nitration of p-tert-butylcalix[n]arene methyl ethers under a variety of reaction conditions has been examined. It has been determined that amongst different nitration procedures adopted (AlCl₃/KNO₃, HNO₃/CH₃COOH, HNO₃/(CH₃CO)₂O, cerium(IV) ammonium nitrate/CH₃COOH), ipso-nitration with CH₃COOH/HNO₃ gives best yields of p-nitrocalixarenes and work up conditions. ipso-Nitration of tetramethoxytetra-p-tert-butylcalix[4]arene gives tetramethoxytetra-p-nitrocalix[4]arene as triclinic crystals with space group with a=9.102(3) Å, b=11.623(3) Å, c=18.368(3) Å and α=77.99(2)°, β=81.10(2)°, γ=73.37(2)°. Its conformation is partial cone and it forms an exocylic 1:1 complex with DMF.     

pTSA-catalyzed condensation of xylenols and aldehydes under solvent-free conditions: One-pot synthesis of 9H-xanthene or bisphenol derivatives

A simple and efficient procedure for the synthesis of 9H-xanthene or bisphenol derivatives has been developed by one-pot condensation of xylenols with aromatic aldehydes in the presence of p-toluenesulfonic acid (pTSA) as a catalyst under solvent-free conditions at 100 °C. It is noteworthy that the condensation reaction of 3,5-xylenol with aldehydes produces 9H-xanthene derivatives, while the reaction with other xylenols leads to the corresponding bisphenol derivatives. Different types of aromatic aldehydes are used in the reaction and in every case the products were obtained in good to excellent yields. The structures of these compounds were established on the basis of IR, ¹H NMR, ¹³C NMR and CHN data.     

A new approach to prepare high molecular weight poly(p-dioxanone) by chain-extending from dihydroxyl terminated propolymers

As poly(p-dioxanone) (PPDO) with a high molecular weight (viscosity-average molecular weight (M_ν) > 100,000 g/mol) is not easy to be obtained in a short time, a new approach has been developed to produce high molecular weight poly(p-dioxanone) (HPPDO-T) by chain-extending reaction of hydroxyl-terminated PPDO (HPPDO) prepolymers using toluene-2,4-diisocyanate (TDI) as chain extender. Here HPPDO prepolymers were synthesized via ring-opening polymerization of p-dioxanone (PDO) monomer initiated by 1,4-butanediol (BD) with Stannous octoate (SnOct₂) as catalyst. The resulting polymers, having a highest M_ν of 250,000 g/mol, were characterized by ¹H NMR, TG, DSC and WXRD. HPPDO prepolymers can react with TDI more effectively than the PPDO prepolymers initiated by mono-functional initiators, and the molecular weights of resulting chain-extended products increase several decade times in an hour comparing to the prepolymers. The chain extended products HPPDO-T have better thermal stability, and higher glass transition temperatures and lower crystallization rates than PPDO homopolymer.     

ICP-AES determination of trace elements after preconcentrated with p-dimethylaminobenzaldehyde-modified nanometer SiO2 from sample solution

A new method that utilizes p-dimethylaminobenzaldehyde-modified nanometer SiO₂ (SiO₂-p-DMABD) as a solid phase extractant has been developed for simultaneous preconcentration of trace Cr(III), Cu(II), Fe(III) and Pb(II) prior to the measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The preconcentration conditions of analytes were investigated, including the pH value, the shaking time, the mass of sorbent, the sample flow rate and volume, the elution condition and the interfering ions. The adsorption capacity of nanometer SiO₂-p-DMABD was found to be (mg g^− 1) Cr(III): 6.2, Cu(II): 18.6, Fe(III): 4.7 and Pb(II): 6.0 at pH 4. The adsorbed metals were quantitatively eluted with 4 mL of 1.0 mol L^− 1 HCl. According to the definition of IUPAC, the detection limits (3σ) of this method for Cr(III), Cu(II), Fe(III) and Pb(II) were 0.79, 1.27, 0.40 and 1.79 ng mL^− 1, respectively. The proposed method achieved satisfied results when it was applied to the determination of trace Cr(III), Cu(II), Fe(III) and Pb(II) in biological and water samples.     

Inorganic-organic hybrids of the p,p′-diphenylmethylenediphosphinate ligand with bivalent metals: a new 2D-layered phenylphosphinate zinc(II) complex

By reaction of Zn(CH₃COO)₂ with p,p′-diphenylmethylenediphosphinic acid in water a new inorganic-organic polymeric hybrid of formula [Zn(CH₂(P(Ph)O₂)₂)] has been synthesized and completely characterized. The X-ray analysis established that the structure consists of 2D-layered polymeric array, the 2D-sheets being built up through strong covalent linkages between the zinc metal and the oxygen donors of the phenylphosphinate ligand. The 2D-layers, which are featuring a mesh-net fashion, present voids of various dimensionality, up to 24-membered rings. The organic parts of the hybrid ligand, namely the phenyl rings, are shielding the inorganic skeleton of the layers, preventing the propagation of the polymer in the third dimension. No water molecules are present in the lattice, both of coordination and crystallization. Crystal data are: monoclinic, P2₁/c, a=11.840(2), b=9.646(9), c=12.516(5) Å, β=95.03(2), V=1423.9(15) Å³, Z=4. The solid material has been characterized by ³¹P MAS NMR spectroscopy and thermogravimetric analysis.     

A facile approach to preparation of long-chain-branched poly(p-dioxanone)

Long-chain-branched poly(p-dioxanone)s (LCB-PPDOs) with different branch densities were prepared via the chain-extending reaction of hydroxyl group terminated linear bi-functional PPDO (2a-PPDO) and star-like tri-functional PPDO (3a-PPDO) prepolymers, which were synthesized by the ring-opening polymerization of p-dioxanone (PDO) using 1,4-butanediol (BD) and trimethylolpropane (TMP) as multi-functional initiators, respectively. The undesirable gelation was successfully depressed by adjusting the chain length and feed ratio of prepolymers. The average molecular weight between branch points (M_b) and the average number of branch per 100,000 g/mol (B_n) of LCB-PPDOs were calculated from the ¹H NMR spectra. The average number of branch ranged from 0 to 6.72 branch points per 100,000 g/mol, and the number-average molecular weights between branch points ranged from 6900 to 20,500 g/mol. The results of differential scanning calorimetry (DSC) showed that the crystallization behavior of LCB-PPDOs was changed evidently with the branch density. Small-amplitude dynamic oscillatory rheometer was used to investigate the rheological properties of the melts of LCB-PPDO including zero-shear viscosity, storage modulus, relaxation times and loss angle, which largely depended on the branch density and length of LCB-PPDOs. Therefore, the rheological behaviors of PPDO can be well-controlled via synthesizing LCB-PPDOs with the desired architectures.     

Preparation and photoluminescence of p-terphenyl derivatives containing cyano groups

Fifteen p-terphenyls containing alkoxylated backbones with and without cyano groups on the phenyl moieties have been designed and synthesized. The influences of the position and the number of cyano groups on the phenyl moieties as well as the skeleton to the absorption and emission spectra both, in solution and in solid state of these new p-terphenyls are discussed.     

Computational study of keto–enol equilibria of tropolone in gas and aqueous solution phase

Density functional theory calculations employing the B3LYP exchange-correlation functional, as well as Hartree–Fock computations, were performed on 2-hydroxy-2,4,6-cycloheptatrien-1-one (tropolone) and 3,5- and 3,6-cycloheptadiene-1,2-dione in gas and aqueous solution phases in order to determine the equilibrium constant for keto to enol interconversion of the isomers of C₇H₆O₂. Two standard basis sets were used throughout, namely 6-311++G^∗∗ and aug-cc-pVDZ. Solvent effects were modelled using two different self-consistent reaction field approaches – the Onsager dipole and the polarizable continuum models (PCM). In addition, the G3 method was used for calculations on species in the gas phase. Molecular geometries were fully optimized at each model chemistry, and it was found that the two keto isomers are always higher in energy than the enol form. From the results of B3LYP/6-311++G^∗∗ calculations of the difference in Gibbs free energy in the gas phase and using PCM, the relative pK values for the 2-hydroxy-2,4,6-cycloheptatrien-1-one ? 3,5- and 3,6-cycloheptadiene-1,2-dione system are 13.75 (g), 15.78 (g) and 13.05 (aq) and 13.45 (aq), respectively. That equilibrium is tilted almost exclusively in the direction of tropolone is due to resonance stabilization of the enol as a result of aromaticity, and is most easily understood on the basis of elementary Hückel theory.     

Synthesis, structural and larvicidal studies of some triorganotin 2-(p-chlorophenyl)-3-methylbutyrates

A series of triorganotin 2-(p-chlorophenyl)-3-methylbutyrates, (R₃SnO₂CCH(CH(CH₃)₂)C₆H₄Cl-4), where R = methyl, ethyl, n-propyl, n-butyl, phenyl and cyclo-hexyl, have been synthesized. Elemental analyses, Mössbauer, Infrared and NMR spectroscopies have been used to characterize their structures. Based on the spectroscopic results, all the complexes with the exception of the tricyclohexyl compound were found to be five-coordinated in the solid state while the tricyclohexyltin derivative was determined to be four-coordinated. Structural assignments based on spectroscopic data are supported by the crystallographic results of four of the triorganotin butyrates (trimethyl-, tri-n-propyl-, tri-n-butyl- and tricyclohexyltin 2-(p-chlorophenyl)-3-methylbutyrate). Multinuclear NMR spectroscopy studies indicated that all the complexes were tetrahedral in solution. Larvicidal activities of the complexes were evaluated against the 2nd instar stage of the Anopheles stephensi, Aedes aegypti and Culex pipiens quinquefasciatus mosquitoes. The toxicity data indicate that there does not appear to be any significant differences of the compounds towards the different mosquito species based on their averaged toxicity values. In addition, the toxicity of the triorganotin compounds towards the mosquito larvae was concluded to be dependent on both the compound and the species of mosquito larvae.     

A study on the reaction between N-substituted p-phenylenediamines and ozone: experimental results and theoretical aspects in relation to their antiozonant activity

The following p-phenylenediamines (PPD): N,N,N^′,N^′-tetramethyl-p-phenylenediamine (TMPPD), N,N^′-dimethylbutyl-p-phenylenediamine (6PPD), N,N^′-diaryl-p-phenylenediamine (DPPD), tris-(N-dimethylpentyl-p-phenylenediamine)-N^′,N^′,N^′-1,3,5-triazine (6PPDTZ), have been oxidized under the action of O₃ in diluted solutions. In all cases the radical cation or semiquinone radical was the first derivative formed by monoelectronic oxidation of the substrate. The radical cation has been studied by electronic spectroscopy and the electronic spectral changes of all mentioned PPD has been followed as function of the ozonation time. The results have been discussed in the frame of the antiozonant properties of these PPD which are used as antiozonant agents in diene rubber protection. It is shown that the antiozonant activity of each PPD considered correlates with the free enthalpy of formation of the respective radical cation. The lowest is the free energy of formation of a PPD radical cation and the highest is the antiozonant activity in a diene rubber compound.