Structural, photophysical, and catalytic properties of Au(I) complexes with 4-substituted pyridines

Ionic gold(I) complexes with general formula of [Au(Py)2][AuCl2] and [Au(Py)2][PF6] (Py = 4-substituted pyridines) have been synthesized. Structures of five Au(I) complexes and a Ag(I) complex were determined by single crystal X-ray diffraction. Evidence for cationic aggregation of [Au(py)2][PF6] complexes in solution was obtained by conductivity measurements and by the isosbestic point observed from variable temperature UV-visible absorption spectra. All compounds were luminous in the solid state. Calculations employing density functional theory were performed to shed light on the nature of the electronic transitions. While the [Au(4-dmapy)2][AuCl2] (4-dmapy = 4-dimethylaminopyridine) and [Au(4-pic)2][AuCl2] (4-pic = 4-picoline) emissions were found to be mainly ligand in nature, their [PF6](-) counterparts involved a Au...Au-interaction imbedded in the highest occupied molecular orbital. [Au(4-dmapy)2][AuCl2] was found to be an efficient catalyst for Suzuki cross-coupling of aryl bromide and phenylboronic acid.     

Stable gold(III) complexes with thiosemicarbazone derivatives

Novel thiosemicarbazonato complexes of gold(III) have been prepared from reactions of [Au(damp-C1,N)Cl2(damp- = 2-(N,N-dimethylaminomethyl)phenyl) or [NBu4][AuCl4] with 2-pyridineformamide thiosemicarbazones (HL). The thiosemicarbazones deprotonate and coordinate as mononegative, tridentate NNS ligands to gold to give [Au(Hdamp-C1)(L)]Cl2 or [AuCl(L)]Cl complexes. The organometallic damp- ligand is protonated during the reactions and the Au-N bond is cleaved. The [AuCl(L)]+ cations represent the first gold(III) complexes with thiourea derivatives which are not stabilised by an additional organometallic ligand. Reactions of [NBu4][AuX4](X = Cl, Br) with diphenylthiocarbazone (dithizone) result in reduction of the metal and the formation of gold(I) complexes of the composition [AuX(SCN4-3,4-Ph2)] where SCN4-3,4-Ph2 is 3,4-diphenyltetrazole thione which is formed from cyclisation of dithizone.     

Liquid crystals of silver complexes derived from simple 1-alkylimidazoles

A homologous series of silver complexes of 1-alkylimidazoles (R-im, R = CnH(2n+1), where n= 10, 12, 14, 16 and 18) was synthesized. All the CnH(2n+1)-im ligands are non-mesomorphic. Upon complexation, all the [Ag(CnH(2n+1)-im)2]-[NO3], except for n = 10, exhibit liquid crystalline properties. The crystal structure of [Ag(C12H25-im)2][NO3] shows that the silver center is two-coordinate and adopts a U-shaped conformation with bilayer packing. The non-mesomorphic [Ag(C16H33-bim)2][NO3](bim = benzimidazole) has a three-coordinate silver ion and has a chair conformation with monolayer stacking. Non-mesomorphic [Ag(C16H33-bim)2][BF4] has a linear geometry around the silver ion and also has a chair conformation. The mesophase for the Ag-(CnH(2n+1)-im) complexes has been identified as the smectic A (SmA) phase. [Ag(C16H33-im)2]+ with four different anions, NO3-, BF4-, PF6- and CF3SO3- were compared. Of the four Ag-im complexes, only that with the CF3SO3- anion does not show liquid-crystal behavior.     

Synthesis and spectroscopic DNA binding studies of homoleptic and heteroleptic ruthenium(II) complexes with imidazo[4,5-f] [1,10]phenanthroline or its derivatives

Two series of new complexes, [Ru(phen)2L]2+ and [RuL3]2+, where phen = 1,10-phenanthroline, and L denotes imidazo[4,5-f][1,10]phenanthroline (IP) or 2-(4-R-phenyl)imidazo[4,5-f][1,10]phenanthroline(PIP, R = H; HOP, R = –OH; MOP, R = –OMe; DMNP, R = NMe2; CLP, R = Cl; NOP, R = NO2), were synthesized and characterized. Their binding to calf thymus DNA was investigated using electronic absorption and emission spectroscopy. [Ru(IP)3]2+ and each [Ru(phen)2 L]2+ showed dramatic absorption hypochromism and bathochromicity, as well as steady-state emission intensity and excited-state lifetime enhancements {except nonluminescent [Ru(phen)2NOP]2+} associated with the presence of DNA, inferring that they bind to DNA by intercalation. These phenomena were not observed for [RuL3]2+ type complexes (except L = IP), indicating that they bind to DNA at most through electrostatic interactions.     

Gold complexes with potentially tri- and tetradentate phosphinothiolate ligands

Reactions of [Au(PPh3)Cl], (Bu4N)[AuCl4] and the organometallic gold complex [Au(damp-C1,N)Cl2] (damp- = 2-(N,N-dimethylaminomethyl)phenyl) with the potentially tri- and tetradentate proligands PhP(C6H3-SH-2-R-3)2 (H2L1a, R = SiMe3; H2L1b, R = H) and P(C6H4-SH-2)3 (H3L2) result in the formation of mono- or dinuclear gold complexes depending on the precursor used. Monomeric complexes of the type [AuL1Cl] are formed upon the reaction with [Au(damp-C1,N)Cl2], but small amounts of dinuclear [AuL1]2 complexes with gold in two different oxidation states, +1 and +3, have been isolated as side-products. The dinuclear compounds are obtained in better yields from [AuCl4]-. A dinuclear complex having two Au(III) centers can be isolated from the reaction of [Au(PPh3)Cl] with H3L2, whereas from the reaction with H2L1b the mononuclear [Au(Ph3P)HL1b] is obtained, which contains a three-coordinate gold atom. Comparatively short gold-gold distances have been found in the dinuclear complexes (2.978(2) and 3.434(1) A). They are indicative of weak gold-gold interactions, which is unusual for gold(III).     

pH-Dependent spectroscopic and luminescent properties, and metal-ion recognition studies of Re(I) complexes containing 2-(2'-pyridyl)benzimidazole and 2-(2'-pyridyl)benzimidazolate

A series of Re(I) complexes, [Re(CO)(3)Cl(HPB)] (1), [Re(CO)(3)(PB)H(2)O] (2), [Re(CO)(3)(NO(3))(PB-AuPPh(3))] (3), and [Re(CO)(3)(NO(3))(PB)Au(dppm-H)Au](2) (4) [HPB = 2-(2'-pyridyl)benzimidazole; dppm = 2,2'-bis(diphenylphosphinomethane)], have been synthesized and characterized by X-ray diffraction. Complex 1, which exhibits interesting pH-dependent spectroscopic and luminescent properties, was prepared by reacting Re(CO)(5)Cl with an equimolar amount of 2-(2'-pyridyl)benzimidazole. The imidazole unit in complex 1 can be deprotonated to form the imidazolate unit to give complex 2. Addition of 1 equiv of AuPPh(3)(NO(3)) to complex 2 led to the formation of a heteronuclear complex 3. Addition of a half an equivalent of dppm(Au(NO(3)))(2) to complex 2 yielded 4. In both 3 and 4, the imidazolate unit acts as a multinuclear bridging ligand. Complex 4 is a rare and remarkable example of a Re(2)Au(4) aggregate in combination with μ(3)-bridging 2-(2'-pyridyl)benzimidazolate. Finally, complex 2 has been used to examine the Hg(2+)-recognition event among group 12 metal ions. Its reversibility and selectivity toward Hg(2+) are also examined.     

Structural diversity in the coordination of amidines and guanidines to monovalent metal halides

A series of structurally characterised, monovalent metal-halide complexes incorporating neutral amidine and guanidine ligands is reported. N,N'-diphenylbenzamidine reacted with copper(I) chloride to afford the bis-ligand complex [CuCl(PhC[NPh][NHPh])2]2 (1), that exists as a chlorine bridged dimer in the solid state, with a non-symmetrical distribution of NH...Cl interactions within the 'Cu2Cl2' metallacycle. In contrast, only one equivalent of the guanidine, Me2NC[NiPr][NHiPr] (2), is coordinated in the copper(I) iodide complex [CuI(Me2NC[NiPr][NHiPr])]2 (3), which was also isolated as the dimer with bridging halide atoms. The molecular structure of the bicyclic guanidine, 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2-alpha]pyrimidine (hppH), is reported, revealing a hydrogen bridged dimer with extensive delocalisation throughout the ligand framework. Coordination of hppH to lithium chloride afforded the dimeric bis-ligand complex [LiCl(hppH)2]2 (4) in which each hppH molecule interacts with a different chlorine atom of the central 'Li2Cl2' core of the molecule via NH...Cl hydrogen bonding. In contrast the 2:1 ligand to metal complex is formed with silver(I) chloride to afford AgCl(hppH)2 (5), a unique example of a monomeric, three-coordinate silver chloride supported by nitrogen-based ligands. The series of mixed ligand complexes [CuX(hppH)(PPh3)]n (6, X = Cl, n= 1; 7, X = Br, n= 2; 8 X = I, n= 2) have also been synthesised and structurally characterised, allowing comparisons of the relative coordinating behaviour of hppH and PPh3 as neutral donors at copper(I) centres to be made.     

Primary amino-functionalized N-heterocyclic carbene ligands as support for Au(I)···Au(I) interactions: structural, electrochemical, spectroscopic and computational studies of the dinuclear [Au2(NH2(CH2)2imMe)2][NO3]2

The N-heterocyclic carbene (NHC) precursor, 1-(2-aminoethyl)-3-methylimidazolium nitrate, [NH(2)(CH(2))(2)imMe)]NO(3) ([3][NO(3)]) reacted with Ag(2)CO(3) in dimethyl sulfoxide readily yielding a Ag(I)-(NHC-NH(2)) complex presenting limited stability in solution. The in situ carbene transfer reaction of the latter with [Au(tht)Cl] afforded the first example of a dinuclear gold(I) complex [Au(2)(NH(2)(CH(2))(2)imMe)(2)][NO(3)](2) ([5][NO(3)](2)) bearing a primary amino-functionalized NHC ligand. The complex has been characterized by NMR, mass spectrometry, X-ray crystallography and cyclic voltammetry; the electrochemical behaviour and photophysical properties of [5][NO(3)](2) have been also investigated and the experimental data have been compared with density functional theory (DFT) and Time Dependent (TDDFT) calculations. Single-crystal structural studies showed that the Au(I)-carbene compound contains dinuclear (AuL)(2) cations in which pairs of gold(I) centres are linked by a pair of bridging ligands, with a Au···Au aurophilic contact of 3.2332(17) ? that is maintained in solution as documented by the DFT calculations. Complex [5][NO(3)](2) is photoluminescent in solution at room temperature and the high energy emission peak at 410 nm is remarkably shifted with respect to the absorption band centered at 260 nm.     

Structure and dynamics of tetrakis(thiophosphinato)resorcinarene complexes of silver(I), gold(I), and palladium(II)

The coordination chemistry of the tetrakis(thiophosphinato)resorcinarene sulfur-donor ligands [(C6H2CH{CH2CH2Ph})4{OC(O)R}4{OP(=S)Ph2}4] (L), where R = OCH2Ph, 4-C6H4CH3, C6H11, C4H3S, or OCH2CCH, is reported. Both silver(I) and gold(I) form cationic complexes of the type [LM2]2+, in which the ligand acts as a bis(chelate) in forming complexes with linear S-M-S (M = Ag or Au) stereochemistry. Gold(I) also forms the unusual complex [L(AuCl)2][LAu2]2+, which forms a supramolecular polymer through intermolecular aurophilic attractions. Palladium(II) forms the complex [LPd2Cl2(mu-Cl)2], in which the dipalladium(II) unit extends the natural bowl structure of the resorcinarene. The solid-state and solution conformations of the complexes, as determined by X-ray structure determination and NMR spectroscopy, respectively, are similar, but several complexes were found to exhibit dynamic behavior in solution, involving either conformational mobility of the resorcinarene unit or intermolecular ligand exchange.     

Synthesis, characterization, and reactivity of [Ru(bpy)(CH3CN)3(NO2)]PF6, a synthon for [Ru(bpy)(L3)NO2] complexes

We report a high yield, two-step synthesis of fac-[Ru(bpy)(CH3CN)3NO2]PF6 from the known complex [(p-cym)Ru(bpy)Cl]PF6 (p-cym = eta(6)-p-cymene). [(p-cym)Ru(bpy)NO2]PF6 is prepared by reacting [(p-cymene)Ru(bpy)Cl]PF6 with AgNO3/KNO2 or AgNO2. The 15NO2 analogue is prepared using K15NO2. Displacement of p-cymene from [(p-cym)Ru(bpy)NO2]PF6 by acetonitrile gives [Ru(bpy)(CH3CN)3NO2]PF6. The new complexes [(p-cym)Ru(bpy)NO2]PF6 and fac-[Ru(bpy)(CH3CN)3NO2]PF6 have been fully characterized by 1H and 15N NMR, IR, elemental analysis, and single-crystal structure determination. Reaction of [Ru(bpy)(CH3CN)3NO2]PF6 with the appropriate ligands gives the new complexes [Ru(bpy)(Tp)NO2] (Tp = HB(pz)3-, pz = 1-pyrazolyl), [Ru(bpy)(Tpm)NO2]PF6 (Tpm = HC(pz)3), and the previously prepared [Ru(bpy)(trpy)NO2]PF6 (trpy = 2,2',6',2' '-terpyridine). Reaction of the nitro complexes with HPF6 gives the new nitrosyl complexes [Ru(bpy)TpNO][PF6]2 and [Ru(bpy)(Tpm)NO][PF6]3. All complexes were prepared with 15N-labeled nitro or nitrosyl groups. The nitro and nitrosyl complexes were characterized by 1H and 15N NMR and IR spectroscopy, elemental analysis, cyclic voltammetry, and single-crystal structure determination for [Ru(bpy)TpNO][PF6]2. For the nitro complexes, a linear correlation is observed between the nitro 15N NMR chemical shift and 1/nu(asym), where nu(asym) is the asymmetric stretching frequency of the nitro group.     

Coinage metal complexes of a boron-substituted soft scorpionate ligand

An improved synthesis of lithium phenyltris(methimazolyl)borate, Li[PhTm(Me)], (methimazole = 1-methylimidazole-2-thione) is described, and the structure of the methanol-solvated [Li(OHMe)4][PhTm(Me)] has been determined. The syntheses and characterization of complexes [M(PhTm(Me))(PR3)] (M = Cu, Ag, Au; R = Et, Ph;) are reported, and the complexes [Cu(PhTm(Me))(PPh3)], [Ag(PhTm(Me))(PEt3)] and [Au(PhTm(Me))(PEt3)] are crystallographically characterized, showing a progression from pseudo-tetrahedral geometry (copper, S3P coordination) to trigonal planar geometry (silver, S2P coordination) to linear geometry (gold, SP coordination). In addition, the copper(I) and silver(I) triphenylphosphine complexes of the adventitiously formed phenylhydrobis(methimazolyl)borate ligand, [M(PhBm(Me))(PPh3)], have been crystallographically characterized, showing both species to have a trigonal planar primary coordination sphere, with a secondary M...H-B interaction. Finally, reaction of copper(II) chloride with Li[PhTm(Me)] results in formation of a compound analyzing as [Cu(II)(PhTm(Me))Cl], although its extreme insolubility and marked instability have precluded its complete characterization. Attempts to prepare this by ultra-slow diffusion of the reactants through solvent blanks has led to isolation of a mixed-valence copper(I/II) methimazolate cluster, [Cu(I)10Cu(II)2(mt)12Cl2] and a copper(I) dimeric complex [Cu2(PhTm(Me))2], indicating that copper(II) ions oxidatively decompose the phenyltris(methimazolyl)borate anion.     

Electronic structure of nitric oxide adducts of bis(diaryl-1,2-dithiolene)iron compounds: four-membered electron-transfer series [Fe(NO)(L)2]z (z = 1+, 0, 1-, 2-)

Four members of the electron-transfer series [Fe(NO)(S(2)C(2)R(2))2]z (z = 1+, 0, 1-, 2-) have been isolated as solid materials (R = p-tolyl): [1a](BF4), [1a]0, [Co(Cp)2][1a], and [Co(Cp)2]2[1a]. In addition, complexes [2a]0 (R = 4,4-diphenyl), [3a]0 (R = p-methoxyphenyl), [Et(4)N][4a] (R = phenyl), and [PPh(4)][5a] (R = -CN) have been synthesized and the members of each of their electron-transfer series electrochemically generated in CH(2)Cl(2) solution. All species have been characterized electro- and magnetochemically. Their electronic, M?ssbauer, and electron paramagnetic resonance spectra as well as their infrared spectra have been recorded in order to elucidate the electronic structure of each member of the electron-transfer series. It is shown that the monocationic, neutral, and monoanionic species possess an {FeNO}6 (S = 0) moiety where the redox chemistry is sulfur ligand-based, (L)2-(L*)1-: [Fe(NO)(L*)2]+ (S = 0), [Fe(NO)(L*)(L)]0 <--> [Fe(NO)(L)(L*)]0 (S = 1/2), [Fe(NO)(L)2]- (S = 0). Further one-electron reduction generates a dianion with an {FeNO}7 (S = 1/2) unit and two fully reduced, diamagnetic dianions L2-: [Fe(NO)(L)2]2- (S = 1/2).     

Triazenide-bridged rhodium-palladium complexes: [I2Rh(mu-p-MeC6H4NNNC6H4Me-p)2Pd(eta(3)-C3H5)]-, a stable paramagnetic [RhPd]4+ species with a localised Rh(II) centre

Deprotonation of mixtures of the triazene complexes [RhCl(CO)2(p-MeC6H4NNNHC6H4Me-p)] and [PdCl(eta(3)-C3H5)(p-MeC6H4NNNHC6H4Me-p)] or [PdCl2(PPh3)(p-MeC6H4NNNHC6H4Me-p)] with NEt3 gives the structurally characterised heterobinuclear triazenide-bridged species [(OC)2Rh(mu-p-MeC6H4NNNC6H4Me-p)2PdLL'] {LL' = eta(3)-C3H5 1 or Cl(PPh3) 2} which, in the presence of Me3NO, react with [NBu(n)4]I, [NBu(n)4]Br, [PPN]Cl or [NBu(n)4]NCS to give [(OC)XRh(mu-p-MeC6H4NNNC6H4Me-p)2PdCl(PPh3)]- (X = I 3-, Br 4-, Cl 5- or NCS 6-) and [NBu(n)4][(OC)XRh(mu-p-MeC6H4NNNC6H4Me-p)2Pd(eta(3)-C3H5)], (X = I 7- or Br 8-). The allyl complexes 7- and 8- undergo one-electron oxidation to the corresponding unstable neutral complexes 7 and 8 but, in the presence of the appropriate halide, oxidative substitution results in the stable paramagnetic complexes [NBu(n)4][X2Rh(mu-p-MeC6H4NNNC6H4Me-p)2Pd(eta(3)-C3H5)], (X = I 9- or Br 10-). X-Ray structural (9-), DFT and EPR spectroscopic studies are consistent with the unpaired electron of 9- and 10- localised primarily on the Rh(II) centre of the [RhPd]4+ core, which is susceptible to oxygen coordination at low temperature to give Rh(III)-bound superoxide.     

Tetrachloro- and tetrabromoarsonium(V) cations: raman and 75As, 19F NMR spectroscopic characterization and X-ray crystal structures of [AsCl4][As(OTeF5)6] and [AsBr4][AsF(OTeF5)5]

The salts [AsX4][As(OTeF5)6] and [AsBr4][AsF(OTeF5)5] (X = Cl, Br) have been prepared by oxidation of AsX3 with XOTeF5 in the presence of the OTeF5 acceptors As(OTeF5)5 and AsF(OTeF5)4. The mixed salts [AsCl4][Sb(OTeF5)6-nCl(n-2)] and [AsCl4][Sb(OTeF5)6-nCl(n)] (n > or = 2) have also been prepared. The AsBr4+ cation has been fully structurally characterized for the first time in SO2ClF solution by 75As NMR spectroscopy and in the solid state by a single-crystal X-ray diffraction study of [AsBr4][AsF(OTeFs)5]: P1, a = 9.778(4) A, b = 17.731(7) A, c = 18.870(8) A, alpha = 103.53(4)degrees, beta = 103.53(4) degrees, gamma = 105.10(4) degrees, V = 2915(2) A3, Z = 4, and R1 = 0.0368 at -183 degrees C. The crystal structure determination and solution 75As NMR study of the related [AsCl4][As(OTeF5)6] salt have also been carried out: [AsCl4][As(OTeF5)6], R3, a = 9.8741(14) A, c = 55.301(11) A, V= 4669(1) A3, Z = 6, and R1 = 0.0438 at -123 degrees C; and R3, a = 19.688(3) A, c = 55.264(11) A, V= 18552(5) A3, Z = 24, and R1 = 0.1341 at -183 degrees C. The crystal structure of the As(OTeF5)6- salt reveals weaker interactions between the anion and cation than in the previously known AsF6- salt. The AsF(OTeF5)5- anion is reported for the first time and is also weakly coordinating with respect to the AsBr4+ cation. Both cations are undistorted tetrahedra with bond lengths of 2.041(5)-2.056(3) A for AsCl4+ and 2.225(2)-2.236(2) A for AsBr4+. The Raman spectra are consistent with undistorted AsX4+ tetrahedra and have been assigned under Td point symmetry. The 35Cl/37Cl isotope shifts have been observed and assigned for AsCl4+, and the geometrical parameters and vibrational frequencies of all known and presently unknown PnX4+ (Pn = P, As, Sb, Bi; X = F, Cl, Br, I) cations have been calculated using density functional theory methods.     

Preparation, characterization, and structural systematics of diphosphane and diarsane complexes of gallium(III) halides

The diphosphane o-C6H4(PMe2)2 reacts with GaX3 (X = Cl, Br, or I) in a 1:1 molar ratio in dry toluene to give trans-[GaX2{o-C6H4(PMe2)2}2][GaX4], the cations of which contain the first examples of six-coordinate gallium in a phosphane complex. The use of a 1:2 ligand/GaCl3 ratio produced [GaCl2{o-C6H4(PMe2)2}][GaCl4], containing a pseudotetrahedral cation, and similar pseudotetrahedral [GaX2{o-C6H4(PPh2)2}][GaX4] complexes are the only products isolated with the bulkier o-C6H4(PPh2)2. On the other hand, Et2P(CH2)2PEt2, which has a flexible aliphatic backbone, formed [(X3Ga)2{mu-Et2P(CH2)2PEt2}], in which the ligand bridges two pseudotetrahedral gallium centers. The diarsane, o-C6H4(AsMe2)2, formed [GaX2{o-C6H4(AsMe2)2}][GaX4], also containing pseudotetrahedral cations, and in marked contrast to the diphosphane analogue, no six-coordinate complexes form; a very rare example where these two much studied ligands behave differently towards a common metal acceptor. The complexes [(I3Ga)2{mu-Ph2As(CH2)2AsPh2}] and [GaX3(AsMe3)] are also described. The X-ray structures of trans-[GaX2{o-C6H4(PMe2)2}2][GaX4] (X = Cl, Br or I), [GaCl2{o-C6H4(PPh2)2}][GaCl4], [GaX2{o-C6H4(AsMe2)2}][GaX4] (X = Cl or I), [(I3Ga)2{mu-Ph2As(CH2)2AsPh2}], and [GaX3(AsMe3)] (X = Cl, Br or I) are reported, and the structural trends are discussed. The solution behavior of the complexes has been explored using a combination of 31P{1H} and 71Ga NMR spectroscopy.     

Gold(I) and silver(I) complexes containing a tripodal tetraphosphine ligand: influence of the halogen and stoichiometry on the properties. The X-ray crystal structure of two gold(I) dimeric aggregates

Complexes of the type [Au2(micro-PP3)2]X2 [X=Cl (), Br (), I ()], [Ag2(micro-PP3)2](NO3)2 (), Ag(PP3)Cl (), M3(micro-PP3)X3 [M=Au, X=Cl (), Br (), I (); M=Ag, X=NO3 ()] and Au4(micro-PP3)X4 [X=Cl (), Br (), I ()] have been prepared by interaction between gold(I) or silver(I) salts and the ligand tris[2-(diphenylphosphino)ethyl]phosphine (PP3) in the appropriate molar ratio. Microanalysis, mass spectrometry, IR and NMR spectroscopies and conductivity measurements were used for characterization. and are ionic dinuclear species containing four-coordinate gold(i) and four/three coordinate silver(i), respectively. Solutions of behave as mixtures of complexes in a 2:1 [Au2(micro-PP3)X2; X=Cl(), Br(), I()] and 4:1 () metal to ligand ratio. and react with free PP(3) in solution to generate the ionic compounds and , respectively. Complexes and , with four linear PAuX fragments per molecule, were shown by X-ray diffraction to consist of dimeric aggregates via close intermolecular gold(I)gold(I) contacts of 3.270 A () and 3.184 A (). The resultant octanuclear systems have an inversion center with two symmetry-related gold(I) atoms being totally out of the aurophilic area and represent a new form of aggregation compared to that found in other halo complexes of gold(I) containing polyphosphines. The luminescence properties of the ligand and complexes, in the solid state, have been studied. Most of the gold systems display intense luminescent emission at room and low temperature. The influence of the halogen on the aurophilic contacts of compounds with a 4:1 metal to ligand ratio results in different photophysical properties, while and are luminescent complex is nonemissive. The luminescence increases with increasing the phosphine/metal ratio affording for complexes , without aurophilic contacts, the stronger emissions. Silver complexes and are nonemissive at room temperature and show weaker emissions than gold(I) species at 77 K.     

Synthesis and Structure of Tetra(para-tolyl)antimony Dicyanodiiodoaurate [p-Tol4Sb][Au(CN)2I2] and Alkyltriphenylphosphonium Dicyanodiiodoaurates [Ph3PAlk][Au(CN)2I2], Alk = Me,CH2CN

Russian Journal of Coordination Chemistry - Red-colored crystalline gold complexes [p-Tol4Sb][Au(CN)2I2] (I), [Ph3PMe][Au(CN)2I2] (II), and [Ph3PCH2CN][Au(CN)2I2] (III) were synthesized by the...     

Aurophilicity-coordination interplay in the design of cyano-bridged nickel(II)-Gold(I) bimetallic assemblies: structural and computational studies of the gold(I)-gold(I) interactions

Two polymorphic cyano-bridged Au(I)-Ni(II) bimetallic complexes of formulas [Ni(en)2Au(CN)2][Au(CN)2] (1) and [Ni(en)2[Au(CN)2]2] (2) have been prepared from the 1:2 reaction between [Au(CN)2]- and either [Ni(en)2Cl2]Cl or [Ni(en)3]Cl2.2H2O, respectively. The structure of 1 consists of polymeric cationic chains of alternating [Au(CN)2]- and [Ni(en)2]2+ units running along the a axis and [Au(CN)2]- anions lying between the chains. The noncoordinated dicyanoaurate anions are aligned perpendicular to the ac plane and involved in aurophilic interactions with the bridging dicyanoaurate groups, ultimately leading to a 2D bimetallic grid. The structure of 2 consists of trinuclear molecules made of two [Au(CN)2]- anions linked to [Ni(en)2]2+ unit in trans configuration. Trinuclear units are joined by aurophilic interactions to form 1D zigzag chains. The magnetic properties of these compounds are strongly dominated by the local anisotropy of the octahedral Ni(II) ions, thus indicating that the magnetic exchange interaction mediated by dicyanoaurate bridging groups, if it exists, is very weak. To get insight into the electronic properties of the inter- and intramolecular interactions of the [Au(CN)2]- building blocks, the structures of different aggregates of dicyanogold units were optimized and then analyzed by making use of atoms-in-molecules (AIM) theory. Moreover, bond indices were calculated by methods based upon nonlinear population analysis.     

Ring-opening polymerization of coordination complexes: silver(I) complexes with bis(amidopyridine) ligands derived from thiophene

The thiophene-based bis(N-methylamido-pyridine) ligand SC4H2-2,5-{C(=O)N(Me)-4-C5H4N}2 reacts with silver(I) salts AgX to give 1 : 1 complexes, which are characterized in the solid state as the macrocyclic complexes [Ag(2){SC4H2-2,5-(CONMe-4-C5H4N)2}2][X]2, which have the cis conformation of the C(=O)N(Me) group, when X = CF3CO2, NO3, or CF3SO3 but as the polymeric complex [Ag(n){SC4H2-2,5-(CONMe-4-C5H4N)2}n][X]n, with the unusual trans conformation of the C(=O)N(Me) group, when X = PF6. The bis(amido-pyridine) ligand SC4H2-2,5-{C(=O)NHCH2-3-C5H4N}2 reacts with silver(I) trifluoroacetate to give the polymeric complex [Ag(n){SC4H2-2,5-(CONHCH2-3-C5H4N)2}n][X]n, X = CF3CO2. The macrocyclic complexes contain transannular argentophilic secondary bonds. The polymers self assemble into sheet structures through interchain C=O...Ag and S...Ag bonds in [Ag(n){SC4H2-2,5-(CONMe-4-C5H4N)2}n][PF6]n and through Ag...Ag, C=O...Ag and Ag...O(trifluoroacetate)...HN secondary bonds in [Ag(n){SC4H2-2,5-(CONHCH2-3-C5H4N)2}n][CF3CO2]n.     

Oxidative addition of small molecules to a dinuclear Au(I) amidinate complex, Au2[(2,6-Me2Ph)2N2CH]2. Syntheses and characterization of Au(II) amidinate complexes including one which possesses Au(II)-oxygen bonds

The dinuclear Au(I) amidinate complex Au2(2,6-Me2Ph-form)2 (1) is isolated in quantitative yield by the reaction of (THT)AuCl and the potassium salt of 2,6-Me2Ph-form in a 1:1 stoichiometric ratio. Various reagents such as Cl2, Br2, I2, CH3I, and benzoyl peroxide add to the dinuclear Au(I)amidinate complex Au2(2,6-Me2Ph-form)2 to form oxidative-addition Au(II) metal-metal-bonded complexes 2, 3, 4, 5, and 6. The Au(II) amidinate complexes are stable as solids at room temperature. The structures of the dinuclear Au2(2,6-Me2Ph-form)2 and the Au(II) oxidative-addition products Au2(2,6-Me2Ph-form)2X2, X=Cl, Br, I, are reported. Crystalline products with an equal amount of oxidized and unoxidized complexes in the same unit cell, [Au2(2,6-Me2Ph-form)2X2][Au2(2,6-Me2Ph-form)2], X=Cl, 2m, or Br, 3m, are isolated and their structures are presented. The structure of [Au2(2,6-Me2Ph-form)2X2][Au2(2,6-Me2Ph-form)2], X=Cl has a Au(II)-Au(II) distance slightly longer, 0.05A, than that observed in the fully oxidized product Au2(2,6-Me2-form)2Cl2, 2. The gold-gold distance in the dinuclear complex decreases upon oxidative addition with halogens from 2.7 to 2.5 A, similar to observations made with the Au(I) dithiolates and ylides. The oxidative addition of benzoyl peroxide leads to the isolation of the first stable dinuclear Au(II) nitrogen complex possessing Au-O bonds, Au2(2,6-Me2Ph-form)2(PhCOO)2, 6, with the shortest Au-Au distance known for Au(II) amidinate complexes, 2.48 A. The structure consists of unidentate benzoate units linked through oxygen to the Au(II) centers. The replacement of the bromide in 3 by chloride, and the benzoate groups in 6 by chloride or bromide also occurs readily. The unit cell dimensions are, for 1, a=7.354(6) A, b=9.661(7) A, c=11.421(10) A, alpha=81.74(5) degrees, beta=71.23(5) degrees, and gamma=86.07(9) degrees (space group P, Z=1), for 2.1.5C6H12, a=11.012(2) A, b=18.464(4) A, c=19.467(4) A, alpha=90 degrees, beta=94.86(3) degrees, and gamma=90 degrees (space group P21/c, Z=4), for 2m.ClCH2CH2Cl, a=16.597(3) A, b=10.606(2) A, c=19.809(3) A, alpha=90 degrees, beta=94.155(6) degrees, and gamma=90 degrees (space group P21/n, Z=2), for 3m, a=16.967(3) A, b=10.783(2) A, c=20.060(4) A, alpha=90 degrees, beta=93.77(3) degrees, and gamma=90 degrees (space group P21/n, Z=2), for 4.THF, a=8.0611(12) A, b=10.956(16) A, c=11.352(17) A, alpha=84.815(2) degrees, beta=78.352(2) degrees, and gamma=88.577(2) degrees (space group P, Z=1), for 5, a=16.688 A, b=10.672(4) A, c=19.953(7) A, alpha=90.00 (6) degrees, beta=94.565(7) degrees, and gamma=90.00 degrees (space group P21/n, Z=4), for 6.0.5C7H8, a=11.160(3) A, b=12.112(3) A, c=12.364(3) A, alpha=115.168(4) degrees, beta=161.112(4) degrees, and gamma=106.253(5) degrees (space group P, Z=1).