Preparation and bactericide activity of gallic acid stabilized gold nanoparticles

In this work, gold nanoparticles with three different sizes (13.7, 39.4, and 76.7 nm) were prepared using a simple aqueous method with gallic acid as the reducing and stabilizing agent, the different sizes were obtained varying some experimental parameters as the pH of the reaction and the amount of the gallic acid. The prepared nanoparticles were characterized using X-ray diffraction, transmission electron microscopy, dynamic light scattering, and UV–Vis spectroscopy. Samples were identified as elemental gold and present spherical morphology, a narrow size distribution and good stabilization according to TEM and DLS results. The antibacterial activity of this gallic acid stabilized gold nanoparticles against S. mutans (the etiologic agent of dental caries) was assessed using a microdilution method obtaining a minimum inhibitory concentration of 12.31, 12.31, and 49.25 μg/mL for 13.7, 39.4, and 76.7 nm gold nanoparticles, respectively. The antibacterial assay showed that gold nanoparticles prepared in this work present a bactericide activity by a synergistic action with gallic acid. The MIC found for this nanoparticles are much lower than those reported for mixtures of gold nanoparticles and antibiotics.     

Green synthesis of gold and silver nanoparticles using gallic acid: catalytic activity and conversion yield toward the 4-nitrophenol reduction reaction

In the present report, gallic acid was used as both a reducing and stabilizing agent to synthesize gold and silver nanoparticles. The synthesized gold and silver nanoparticles exhibited characteristic surface plasmon resonance bands at 536 and 392 nm, respectively. Nanoparticles that were approximately spherical in shape were observed in high-resolution transmission electron microscopy and atomic force microscopy images. The hydrodynamic radius was determined to be 54.4 nm for gold nanoparticles and 33.7 nm for silver nanoparticles in aqueous medium. X-ray diffraction analyses confirmed that the synthesized nanoparticles possessed a face-centered cubic structure. FT-IR spectra demonstrated that the carboxylic acid functional groups of gallic acid contributed to the electrostatic binding onto the surface of the nanoparticles. Zeta potential values of ?41.98 mV for the gold nanoparticles and ?53.47 mV for the silver nanoparticles indicated that the synthesized nanoparticles possess excellent stability. On-the-shelf stability for 4 weeks also confirmed that the synthesized nanoparticles were quite stable without significant changes in their UV–visible spectra. The synthesized nanoparticles exhibited catalytic activity toward the reduction reaction of 4-nitrophenol to 4-aminophenol in the presence of sodium borohydride. The rate constant of the silver nanoparticles was higher than that of the gold nanoparticles in the catalytic reaction. Furthermore, the conversion yield (%) of 4-nitrophenol to 4-aminophenol was determined using reversed-phase high-performance liquid chromatography with UV detection at 254 nm. The silver nanoparticles exhibited an excellent conversion yield (96.7–99.9 %), suggesting that the synthesized silver nanoparticles are highly efficient catalysts for the 4-nitrophenol reduction reaction.     

Ultrasonic-assisted spark plasma discharge for gold nanoparticles synthesis

We examine the ultrasonic-assisted spark discharge in gold nanoparticles production. A 1 kHz pulsed power supply is used to generate spark discharge plasma. The appropriate range of peak power (pulse peak current) for nanoparticles production was determined by the Dynamic Light Scattering (DLS) method. Colloidal gold nanoparticles were synthesized in 100 mL deionized water and pure ethanol as liquid dielectrics. Scanning Electron Microscopy (SEM) micrographs show that the nanoparticles diameter in the deionized water is larger than in pure ethanol. Transmission Electron Microscopy (TEM) micrographs of the gold nanoparticles also confirm the SEM results with more accuracy. The present study revealed that the ultrasonic wave increases the shape uniformity of the nanoparticles and decreases their size.     

Increasing the stability of DNA-functionalized gold nanoparticles using mercaptoalkanes

In this work, the stability of DNA functionalized gold nanoparticles was examined in relation to their size, temperature, as well as the presence of mono- and bivalent ions. Furthermore, we report on the stabilizing effect of an additional post-functionalization with mercaptoalkanes, optionally bearing triethylene glycol (TEG) units. Although such so-called backfilling molecules are commonly used for planar gold surfaces, they have rarely been reported in combination with DNA-functionalized nanoparticles. Our results show that, conform the DLVO theory, smaller citrate-capped gold nanoparticles were more stable towards higher concentrations of salt. Citrate nanoparticles of 30 nm in size were only stable in sodium chloride concentrations up to ~0.05 M and up to 45 °C. The stability of these uncoated nanoparticles was even lower when bivalent salts were used (i.e. <2 × 10⁻⁴ M). Immobilization of DNA on these nanoparticles, on the other hand, improved the stability in salt solutions with at least one order of magnitude. The additional use of backfilling molecules stabilized the gold nanoparticles even further, without negatively affecting the DNA hybridization efficiency. DNA functionalization also had a positive impact on the thermal stability of the nanoparticles. Unfortunately, this beneficial effect was not observed after a subsequent backfilling step.

     

Pulsed-laser generation of gold nanoparticles with on-line surface plasmon resonance detection

Size of nanoparticles is an important parameter for their applications. The real-time monitoring is required for reliable and reproducible production of nanoparticles with controllable size. We present results of our research on development of the system for the online nanoparticle characterization during their production by a laser. The laser ablation chamber which allows measurements of surface plasmon resonance spectra during the nanoparticle generation process has been designed and fabricated. The online characterization system was tested by producing and modification of gold nanoparticles. Nanoparticles were generated by nanosecond-laser (wavelength 1064 nm) ablation of gold target in deionized water, and optimal conditions for the highest nanoparticle productivity were estimated. The mean diameter of nanoparticles was determined using their absorption spectra measured in the real-time during the ablation experiments and from the TEM images analysis, and it varied from 20 to 45 nm. The mismatch between nanoparticle diameters, estimated using these two methods, is due to the polydispersity of the generated nanoparticles. The further experiments of laser-induced modification of colloidal gold nanoparticles were carried out using second harmonic (wavelength 532 nm) of nanosecond Nd:YAG laser and alteration in nanoparticle size were acquired by the online measurement system.     

Physicochemical properties and toxicological assessment of modified CdS nanoparticles

The synthesis procedure represents a key aspect in designing the physical and chemical properties of gold nanoparticles. The current study proposes a simple approach for gold nanoparticles synthesis using non-thermal plasma. The novelty of the setup consists in producing an in-liquid plasma discharge in argon bubbles that are externally generated in the solution exposed to treatment. Because plasma is the source of active species which are directly involved in gold reduction, no additional reducing agent was necessary. Collagen protein was used as capping agent. A plasma treatment of 10 min is sufficient for obtaining stable colloidal solutions with UV-Vis absorption maximum at 530 nm. Transmission electron microscopy images revealed preponderant spherical nanoparticles with dimensions in the range of 6–20 nm. The method of synthesis distinguishes by its good reproducibility, facility, efficiency, and ability to generate stable colloidal nanoparticles after several minutes of plasma exposure.     

Molecular dynamics simulations on the melting of gold nanoparticles

Molecular dynamics is employed to study the melting of bulk gold and gold nanoparticles. PCFF, Sutton-Chen and COMPASS force fields are adopted to study the melting point of bulk gold and we find out that the Sutton-Chen force field is the most accurate model in predicting the melting point of bulk gold. Consequently, the Sutton-Chen force field is applied to study the melting points of spherical gold nanoparticles with different diameters. Variations of diffusion coefficient, potential energy and translational order parameter with temperature are analyzed. The simulated melting points of gold nanoparticles are between 615～1115 K, which are much lower than that of bulk gold (1336 K). As the diameter of gold nanoparticle drops, the melting point also descends. The melting mechanism is also analyzed for gold nanoparticles.     

Thiol-Capped Gold Nanoparticle Biosensors for Rapid and Sensitive Visual Colorimetric Detection of <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis>

In the last few years, gold nanoparticle biosensors have been developed for rapid, precise, easy and inexpensive with high specificity and sensitivity detection of human, plant and animal pathogens. Klebsiella pneumoniae serotype K2 is one of the common gram-negative pathogens with high prevalence. Therefore, it is essential to provide the effective and exclusive method to detect the bacteria. Klebsiella pneumoniae serotype K2 strain ATCC9997 genomic DNA was applied to establish the detection protocol either with thiol-capped oligonucleotide probes and gold nanoparticles or polymerase chain reaction based on K2A gene sequence. In the presence of the genomic DNA and oligonucleotide probes, a change in the color of gold nanoparticles and maximum changes in wavelength at 550-650 nm was achieved. In addition, the result showed specificity of 15?×?10⁵ CFU/mL and 9 pg/μL by gold nanoparticles probes. The lower limit of detection obtained by PCR method was 1 pg/μL. Moreover, results demonstrated a great specificity of the designed primers and probes for colorimetric detection assay and PCR. Colorimetric detection using gold nanoparticle probe with advantages such as the lower time required for detection and no need for expensive detection instrumentation compared to the biochemical and molecular methods could be introduced for rapid, accurate detection of the bacteria.     

Core–shell-structured nanothermites synthesized by atomic layer deposition

Chitosan was conjugated with folic acid (FA) and the resulting chitosan derivatives with a FA-substitution degree of around 6 % was used to synthesize FA-conjugated chitosan–polylactide (FA–CH–PLA) copolymers to build a drug carrier with active targeting characteristics for the anticancer drug of paclitaxel (PTX). Selected FA–CH–PLAs with various polylactide percentages of about 40 wt% or lower were employed to fabricate nanoparticles using sodium tripolyphosphate as a crosslinker, and different types of nanoparticles were endued with similar average particle-sizes located in a range between 100 and 200 nm. Certain types of PTX-loaded FA–CH–PLA nanoparticles having encapsulation efficiency of around 90 % and initial load of about 12 % were able to release PTX in a controlled manner with significant regulation by polylactide content in FA–CH–PLAs. Targeting characteristic of achieved nanoparticles was confirmed using FA-receptor-expressed MCF-7 breast cancer cells. The uptake of PTX revealed that optimized FA–CH–PLA nanoparticles with an equivalent PTX-dose of around 1 μg/mL could have more than sixfold increasing abilities to facilitate intracellular paclitaxel accumulation in MCF-7 cells after 24 h treatment as compared to free PTX. At a relatively safe equivalent PTX-dose for normal MCF-10A mammary epithelial cells, the obtained results from Hoechst 33342 staining indicated that optimized PTX-loaded FA–CH–PLA nanoparticles had more than threefold increasing abilities to induce MCF-7 cell apoptosis in comparison to free PTX.     

Synthesis and characterization of uncoated and gold-coated magnetite nanoparticles

We report on the synthesis and characterization of uncoated and gold coated magnetite nanoparticles. Structural characterizations, carried out using X-ray diffraction, confirm the formation of magnetite phase with a mean size of ~7 and ~8 nm for the uncoated and gold covered magnetite nanoparticles, respectively. The value of the gold coated Fe₃O₄ nanoparticles is consistent with the mean physical size determined from transmission electron microscopy images. Mössbauer spectra at room temperature are consistent with the thermal relaxation of magnetic moments mediated by particle-particle interactions. The 77 K Mössbauer spectra are modeled with four sextets. Those sextets are assigned to the signal of iron ions occupying the tetrahedral and octahedral sites in the core and shell parts of the particle. The room-temperature saturation magnetization value determined for the uncoated Fe₃O₄ nanoparticles is roughly ~60 emu/g and suggests the occurrence of surface effects such as magnetic disorder or the partial surface oxidation. These surface effects are reduced in the gold-coated Fe₃O₄ nanoparticles. Zero-field–cooled and field-cooled curves of both samples show irreversibilities which are consistent with a superparamagnetic behavior of interacting nanoparticles.     

Sensitive and Selective Detection of Antibiotic D-Penicillamine Based on a Dual-Mode Probe of Fluorescent Carbon Dots and Gold Nanoparticles

This paper reported a dual-mode probe for D-penicillamine on the basis of pH-mediated gold nanoparticles aggregation and fluorescence resonance energy transfer (FRET) from carbon dots. D-penicillamine is a zwitterionic compound and has different forms depending on specific pH ranges. The thiol group of D-penicillamine has high affinity towards the surface of gold nanoparticles and can replace other surface ligands. When pH values were close to its isoelectrical point (pH(I)), the D-penicillamine capped gold nanoparticles aggregated through hydrogen bonding or electrostatic interactions, resulting in the releasing of carbon dots from gold nanoparticles. The dual-mode probe consisted of fluorescent carbon dots and gold nanoparticles, and the fluorescence of carbon dots was quenched by the attached gold nanoparticles due to the FRET. Then, the fluorescence can be recovered in presence of D-penicillamine due to the gold nanoparticles aggregation in specific pH range. Under the optimum conditions, the probe has linear response for D-penicillamine in the 0.25–1.5 μM concentration range with a detection limit of 0.085 μM. This method provides a potential application in sensitive detection of D-penicillamine.     

Morphological, structural, and magnetic properties of Co nanoparticles in a silicon oxide matrix

We present a morphological, structural, and magnetic characterization of Co nanoparticles (mean diameter of 10.3 ± 1.8 nm) grown using a gas aggregation source and embedded in a silicon oxide matrix by sequential deposition of nanoparticles and silicon oxide. We show that the Co nanoparticles ??soft-land?? on the substrates and suffer a moderate oxidation in contact with the silicon oxide. Despite this moderate oxidation, it is found that, at room temperature, the magnetic volume of the resulting nanoparticles is below the superparamagnetic limit. The results presented in this article are compatible with the presence of an assembly of magnetically independent particles that also display a moderate exchange bias at low temperature.     

Local near field assisted ablation of fused silica

In this contribution we present recent experimental and theoretical results on local near-field assisted laser ablation. Along these lines, we have generated sub-diffraction sized nanostructures on fused silica substrates, exploiting the local near fields of highly ordered triangular gold nanoparticle arrays generated by nanosphere lithography. After preparation, the nanoparticle arrays were irradiated with a single 35 fs long laser pulse with a central wavelength of λ=790 nm. The pulse energy was set to E=3.9 μJ, resulting in a fluence well below the ablation threshold of the fused silica substrates. In addition, 3D electromagnetic simulations using a finite integration technique in time domain have been performed. The simulations demonstrate that indeed the local field in the vicinity of the tips of the triangular nanoparticles overcome the ablation threshold and easily explain the generated nanostructures. Most importantly, the simulations show, that higher order modes contribute to the ablation process. These modes cause ablation along the side edges of the nanoparticles. Finally, we demonstrate, that the optical properties of the triangular nanoparticles, which can be tuned by their morphology, are crucial parameters for the generation of the ablation structures.     

Hydrophobically modified chitosan/gold nanoparticles for DNA delivery

Present study dealt an application of modified chitosan gold nanoparticles (Nac-6-Au) for the immobilization of necked plasmid DNA. Gold nanoparticles stabilized with N-acylated chitosan were prepared by graft-onto approach. The stabilized gold nanoparticles were characterized by different physico-chemical techniques such as UV-vis, TEM, ELS and DLS. MTT assay was used for in vitro cytotoxicity of the nanoparticles into three different cell lines (NIH 3T3, CT-26 and MCF-7). The formulation of plasmid DNA with the nanoparticles corresponds to the complex forming capacity and in-vitro/in-vivo transfection efficiency was studied via gel electrophoresis and transfection methods, respectively. Results showed the modified chitosan gold nanoparticles were well-dispersed and spherical in shape with average size around 10～12 nm in triple distilled water at pH 7.4, and showed relatively no cytotoxicity at low concentration. Addition of plasmid DNA on the aqueous solution of the nanoparticles markedly reduced surface potential (50.0～66.6%) as well as resulted in a 13.33% increase in hydrodynamic diameters of the formulated nanoparticles. Transfection efficiency of Nac-6-Au/DNA was dependent on cell type, and higher β-galactosidase activity was observed on MCF-7 breast cancer cell. Typically, this activity was 5 times higher in 4.5 mg/ml nanoparticles concentration than that achieved by the nanoparticles of other concentrations (and/or control). However, this activity was lower in in-vitro and dramatically higher in in-vivo than that of commercially available transfection kit (Lipofectin®) and DNA. From these results, it can be expected to develop alternative new vectors for gene delivery.     

Interfacial properties of hybrid nanomaterials

A brief summary of our ongoing efforts to understand the surface properties of nanoparticles using fluorophores, namely pyrene alkanethiols, is presented. Excited state interactions were investigated by varying the length of the spacer group and the concentration of fluorophore. The flexible long alkyl chain tethering pyrene inAu-P2/Au-P3 allows free interaction between fluorophores resulting in excimer formation whereas the intermolecular interactions are limited in theAu-P 1 system due to the restriction imposed by the curvature of spherical gold nanoparticle. A gradual increase in the peak intensity ratio of III/I band of the normal fluorescence of pyrene was observed indicating that the surface of nanoparticle is more polar than the bulk solvent (toluene)     

Deposition of colloidal gold nanoparticles by fully pulsed-voltage-controlled electrohydrodynamic atomisation

Pulsed electrohydrodynamic atomisation (EHDA) of aqueous 10 nm gold colloid in a full voltage-controlled form was investigated. By using 4 µm and 20 μm nozzles, electrified fluid jet was emitted and Au nanoparticles in the jet were deposited onto a silicon substrate. Scanning electron microscopy (SEM) revealed that different morphology of the artifact was formed by using different voltages pulses. Particularly, island-liked artifact down to 10 μm can be produced regularly in the case of cone-jet mode by low voltage pulse. Our results demonstrate pulsed EHDA is a promising approach in creating micro-patterns of colloid-based nanomaterials.     

Luminescence Enhancement from Silica-Coated Gold Nanoparticle Agglomerates Following Multi-photon Excitation

Multi-photon absorption induced luminescence (MAIL) from bare gold nanoparticles, silica-coated particles, as well as silica-coated agglomerated gold nanoparticles suspended in aqueous solution was studied by using time-resolved and steady-state luminescence spectroscopy. The nanoparticles were excited by femtosecond pulses of wavelengths ranging from 630 nm to 900 nm. The luminescence from the particles exhibits a broad spectrum in the UV and VIS region. The time-resolved measurements indicate a luminescence lifetime of a few ps, limited by the response of the experimental system. The studied dependence of the MAIL efficiency on the excitation wavelength showed that the luminescence from silica-coated agglomerates was enhanced over the whole range of excitation wavelengths, when compared to the luminescence from individual gold nanoparticles. The agglomerates show an almost excitation wavelength independent efficiency of the MAIL, while for individual nanoparticles a rapid decrease of the MAIL efficiency was observed with increasing excitation wavelength. The observed enhancement of the MAIL from the agglomerated nanostructures can be attributed to the presence of localized surface plasmon resonances in the spectral region corresponding to the excitation wavelengths. The high MAIL efficiency from the agglomerated nanoparticle structures in the near-infrared could be an advantage in the expanding field of luminescence-based-imaging, as well as in biosensor technology.     

Properties of pulsed laser deposited nanocomposite NiO:Au thin films for gas sensing applications

Nanocomposite thin films formed by gold nanoparticles embedded in a nickel oxide matrix have been synthesized by a new variation of the pulsed laser deposition technique. Two actively synchronized laser sources, a KrF excimer laser at 248 nm and an Nd:YAG laser at 355 nm, were used for the simultaneous ablation of nickel and gold targets in oxygen ambient. The structural, morphological, and electrical properties of the obtained nanocomposite films were investigated in relation to the fluence of the laser irradiating the gold target. The nanocomposite thin films were tested as electrochemical hydrogen sensors. It was found that the addition of the gold nanoparticles increased the sensor sensitivity significantly.     

Nitrogen-doped and gold-loaded TiO2 photocatalysts synthesized by sequential reactive pulsed laser deposition

Nitrogen-doped titanium oxide thin films covered by gold metal nanoparticles were grown on (001) SiO₂ quartz substrates by pulsed laser deposition. A KrF* excimer laser source (λ = 248 nm, τ _FWHM ≤ 25 ns, ν = 10 Hz) was used for the irradiation of TiO₂ and gold metal targets. The experiments were performed in controlled reactive oxygen or nitrogen atmosphere. The layers were grown for photocatalytic applications. Evaluation of photocatalytic activity was performed by photodegradation of methyl orange under near-UV light irradiation. Our results show that nitrogen doping and addition of gold nanoparticles have complementary effects, photoactivity being significantly improved as compared to that of pure titanium oxide.     

Numerical study of dumbbell-shaped gold nanoparticles using in plasmonic waveguides in near infra-red spectrums

In this paper, we investigated plasmonic waveguides in near infra-red spectrum using dumbbell-shaped gold nanoparticles. It is possible to shift localized surface plasmon resonance (LSPR) to the desired wavelength with proper geometrical properties. 3-D FDTD simulations are used to determine the set of geometrical parameters of nanoparticles to obtain LSPR at 1310 and 1550 nm. Employing different configuration of nanoparticles chains, we not only can design waveguides with better optical characteristics but also achieve the demultiplexing function in V-form arrays. The proposed nanoparticles show sharp resonance peak, 168 FWHM bandwidth for λ?=?1310, and 204 nm for λ?=?1550 nm. Linear chains of particles can transport the electromagnetic energy at λ?=?1310 nm, with transmission losses γ_L?=?3 dB/452 and γ_T?=?3 dB/446 nm and group velocities v_gL?=?0.336C₀ and v_gT?=?0.256C₀ for longitudinal and transverse polarizations, respectively, where C₀ is the speed of light in the vacuum. At λ?=?1550 nm, γ_L?=?3 dB/490, γ_T?=?3 dB/604, v_gL?=?0.382C₀ and v_gT?=?0.260C₀. Moreover, we attained 8.13 as minimum ratio of averaged electric field intensity and 36.8 as minimum ratio of averaged Poynting vector as a function of position between two ports in demultiplexing function.