A simple method for timing an XFEL source to high-power lasers

We propose a technique for timing an X-ray free-electron laser (XFEL) to a high-power conventional laser with femtosecond accuracy, yielding the relative jitter between pump and X-ray probe, and allowing sorting of experimental results over a certain time window. The same electron bunch is used to produce both an XFEL pulse and an ultrashort optical pulse by means of an optical radiator downstream of the X-ray undulator. Being produced by the same electron bunch, these pulses are perfectly synchronized. Cross-correlation techniques will allow to determine relative jitter between the optical pulse (and, thus, the XFEL pulse) and a pulse from an external pump-laser. Technical realization of the proposed timing scheme uses an optical-replica synthesizer setup to be installed after the final bunch-compression stage of the XFEL for electron bunch diagnostics purposes. A number of critical issues are quantitatively analyzed.     

X-ray pump optical probe cross-correlation study of GaAs

Ultrafast dynamics in atomic, molecular and condensed-matter systems are increasingly being studied using optical-pump, X-ray probe techniques where subpicosecond laser pulses excite the system and X-rays detect changes in absorption spectra and local atomic structure(1-3). New opportunities are appearing as a result of improved synchrotron capabilities and the advent of X-ray free-electron lasers(4,5). These source improvements also allow for the reverse measurement: X-ray pump followed by optical probe. We describe here how an X-ray pump beam transforms a thin GaAs specimen from a strong absorber into a nearly transparent window in less than 100 ps, for laser photon energies just above the bandgap. We find the opposite effect-X-ray induced optical opacity-for photon energies just below the bandgap. This raises interesting questions about the ultrafast many-body response of semiconductors to X-ray absorption, and provides a new approach for an X-ray/optical cross-correlator for synchrotron and X-ray free-electron laser applications.     

Attosecond‐precision ultrafast photonics

We review our recent progress toward attosecond‐precision ultrafast photonics based on ultra‐low timing jitter optical pulse trains from mode‐locked lasers. In femtosecond mode‐locked lasers, the concentration of a large number of photons in an extremely short pulse duration enables the scaling of timing jitter into the attosecond regime. To characterize such jitter levels, we developed new attosecond‐resolution measurement techniques and show that standard fiber lasers can achieve sub‐fs high‐frequency jitter. By leveraging the ultra‐low jitter of free‐running mode‐locked lasers, we pursued high‐precision optical‐optical and optical‐microwave synchronization techniques. Optical signals spanning 1.5 octaves were synthesized by attosecond‐precision timing and phase synchronization of two independent mode‐locked lasers. High‐stability microwave signals were also synthesized from mode‐locked lasers with drift‐free sub‐10‐fs precision. We further demonstrated the attosecond‐precision distribution of optical pulse trains to remote locations via timing‐stabilized fiber links. Finally, the application of optical pulse trains for high‐resolution sampling and analog‐to‐digital conversion is discussed.     

Elimination of pump-induced frequency jitter on fiber-laser frequency combs

Optical frequency combs generated by femtosecond fiber lasers typically exhibit significant frequency noise that causes broad optical linewidths, particularly in the comb wings and in the carrier-envelope offset frequency (f(ceo)) signal. We show these broad linewidths are mainly a result of white amplitude noise on the pump diode laser that leads to a breathing-like motion of the comb about a central fixed frequency. By a combination of passive noise reduction and active feedback using phase-lead compensation, this noise source is eliminated, thereby reducing the f(ceo) linewidth from 250 kHz to <1 Hz. The in-loop carrier-envelope offset phase jitter, integrated to 100 kHz, is 1.3 rad.     

飞秒时间分辨实验中相关函数和时间零点的确定

结合飞秒激光在研究分子激发态弛豫动力学中的应用,介绍了几种飞秒时间分辨实验中确定泵浦激光脉冲与探测激光脉冲的相关函数和时间零点的方法.对于波长在可见波段的泵浦和探测激光脉冲,我们可以利用非线性光学的技术手段,探测泵浦光与探测光的和频光的强度随二者间的时间延迟的变化来确定相关函数和时间零点;对于波长在紫外甚至更短的波段的泵浦和探测激光脉冲,由于单脉冲能量比较低,目前还很难利用技术手段来测定泵浦激光与探测激光的相关函数及时间零点,可以利用某些原子气体(如Xe)或某些具有短寿命态的分子作平行实验进行间接测量.     

Femtosecond X-rays from relativistic electrons: new tools for probing structural dynamics

Femtosecond X-ray science is a new frontier in ultrafast research in which time-resolved measurement techniques are applied with X-ray pulses to investigate structural dynamics at the atomic scale on the fundamental time scale of an atomic vibrational period (∼100 fs). This new research area depends critically on the development of suitable femtosecond X-ray sources with the appropriate flux (ph/(s·0.1% BW)), brightness (ph/(s·mm²·mrad²·0.1% BW)), and tunability for demanding optical/X-ray pump probe experiments. In this paper we review recently demonstrated techniques for generating femtosecond X-rays via interaction between femtosecond laser pulses and relativistic electron beams. We give an overview of a novel femtosecond X-ray source that is proposed based on a linear accelerator combined with X-ray pulse compression.     

A compact warm ring for industrial applications

The ultrafast, high brightness X-ray free electron laser (XFEL) sources of the future have the potential to revolutionize the study of time-dependent phenomena in the natural sciences. These linear accelerator (linac) sources will generate femtosecond (fs) X-ray pulses with peak flux comparable to conventional lasers, and far exceeding all other X-ray sources. The Stanford Linear Accelerator Center (SLAC) has pioneered the development of linac science and technology for decades, and since 2000 SLAC and the Stanford Synchrotron Radiation Laboratory (SSRL) have focused on the development of linac based ultrafast electron and X-ray sources.     

High-repetition-rate femtosecond optical parametric chirped-pulse amplifier in the mid-infrared

We discuss a dual-stage optical parametric chirped-pulse amplifier generating sub-100-fs pulses in the mid-infrared at a repetition rate of 100 kHz. The system is based on a 1064 nm pump laser and a 3–4 μm difference frequency generation seed source derived from the output of a femtosecond fiber laser amplifier. Both lasers are commercially available, are diode-pumped, compact, and allow for turn-key operation. Here, we focus our discussion on the design and dimensioning of the optical parametric chirped-pulse amplifier. In particular, we review the available gain materials for mid-infrared generation and analyze the impact of different stretching scenarios. Timing jitter plays an important role in short-pulse parametric amplifier systems and is therefore studied in detail. The geometry of the amplifier stages is optimized through a full 3-dimensional simulation with the aim of maximizing gain bandwidth and output power. The optimized system yields output pulse energies exceeding 1 μJ and an overall gain larger than 50 dB. The high repetition rate of the pump laser results in an unprecedented average power from a femtosecond parametric system at mid-infrared wavelengths. First experimental results confirm the design and the predictions of our theoretical model.     

Microfocus Cu K(alpha) source for femtosecond x-ray science

We demonstrate a subpicosecond 1 kHz femtosecond x-ray source with a well-accessible quasi-point size (10 microm diameter) providing Cu K(alpha) emission with a maximum flux of 6.8 x 10(10) photons/s for continuous operation of 10 h. A new geometry that essentially facilitates the adjustment and diminishes the temporal jitter between the x-ray probe and the laser pump pulse is implemented for time-resolved diffraction experiments.     

掺镱飞秒激光晶体研究进展

飞秒激光在军事、医学、通讯、加工等领域有着重要应用,已经成为新世纪激光技术领域的研究热点。得益于激光二极管(LD)的快速发展,以LD作为泵浦源成为新型全固态飞秒激光器的发展趋势。Yb^3+离子掺杂的激光晶体材料因其独特的能级结构、宽带吸收与发射等优势,逐渐成为LD直接泵浦并实现1.0μm飞秒激光输出的重要增益介质。详细总结了当前掺Yb^3+飞秒激光晶体的研究进展,分析了目前存在的主要问题,给出了未来飞秒激光晶体发展的两个建议方向:高效率小功率飞秒激光和大功率高能量飞秒激光。以Yb^3+:Sr3Y2(BO3)4晶体为例,详细研究了其晶体生长、光谱、连续与飞秒激光性能,并实现了中心波长在1060 nm处脉宽为116 fs,平均输出功率为1.08 W,光光转换效率为33.1%的高效率飞秒激光输出,表明Yb^3+:Sr3Y2(BO3)4及其同体系晶体是一类优异的高效率飞秒激光材料。     

Theory of carrier gain dynamics in InGaAs/AlGaAs strained-layer single-quantum-well diode lasers

Calculations of the femtosecond gain dynamics in InGaAs/AlGaAs strained-layer single-quantum-well diode lasers are presented and compared to experiments which use a novel multiple-wavelength pump probe technique. We develop a detailed theoretical model for the gain dynamics in a quantum well laser diode structure to aid in the interpretation of gain dynamics induced by both interband absorption and stimulated emission of photons. In the model, transient gain and differential transmission are computed in a multiband effective mass model including biaxial strain, valence subband mixing, and scattering both within and between subbands. The transient photogeneration of electron-hole pairs by the pump pulse and subsequent relaxation of carriers by both polar optical phonon scattering and carrier-carrier scattering are calculated within a Boltzmann equation framework. A relaxation approximation for the carrier-carrier scattering is made making the coupled Boltzmann equations an effective one dimensional model which are then solved using an adaptive Runge-Kutta technique rather than a more computationally intensive Monte Carlo approach.     

飞秒时间分辨实验中泵浦-探测交叉相关函数的测量和时间零点的确定

飞秒激光技术的出现使得实时探测与跟踪激发态超快弛豫动力学过程成为可能,并能够给出激发态动力学过程清晰的物理图像。而在飞秒时间分辨实验中,泵浦-探测相关函数和时间零点直接影响实验结果的可靠性和准确性。本文结合飞秒激光在分子激发态超快动力学过程中的应用进展,介绍了根据实验条件和要求,在具体实验过程中泵浦-探测相关函数测量和时间零点确定的几种方法。实验中选择可见光作为泵浦光和探测光时,可以通过测定随泵浦-探测时间延迟变化的泵浦激光与探测激光的和频/差频光强来确定泵浦探测交叉相关函数和时间零点;而选择中心波长在紫外甚至真空紫外的激光脉冲作为泵浦光或探测光时,泵浦-探测交叉相关函数通常采用校正的方法测量。     

富勒烯有机-无机杂化材料的非共珍三阶非线性光学特性

采用中心波长800 nm、脉宽30 fs的超短激光脉冲,通过飞秒光开关技术(Optical Kerr Shutter,OKS)对富勒烯有机-无机杂化材料的飞秒超快非线性特性进行了实验研究.获得270 fs的开关时间,所得的富勒烯有机-无机杂化材料的三阶非线性系数X~(3)约为4.5×10~(-4) esu,比C_(60)分子的三阶非线性系数X~(3)高一个数量级.通过实验测定的光克尔信号强度与激发光和探测光偏振方向夹角的依赖关系表明:30 fs的超短激光脉冲激发富勒烯有机-无机杂化材料的克尔信号主要是源于光诱导双折射效应,而非用200 fs的超短激光脉冲时来自瞬态栅的自衍射效应.     

富勒烯有机-无机杂化材料的非共珍三阶非线性光学特性

采用中心波长800 nm、脉宽30 fs的超短激光脉冲,通过飞秒光开关技术（Optical Kerr Shutter,OKS）对富勒烯有机-无机杂化材料的飞秒超快非线性特性进行了实验研究.获得270 fs的开关时间,所得的富勒烯有机-无机杂化材料的三阶非线性系数χ(3)约为4.5×10－14 esu,比C60分子的三阶非线性系数χ(3)高一个数量级.通过实验测定的光克尔信号强度与激发光和探测光偏振方向夹角的依赖关系表明：30 fs的超短激光脉冲激发富勒烯有机-无机杂化材料的克尔信号主要是源于光诱导双折射效应,而非用200 fs的超短激光脉冲时来自瞬态栅的自衍射效应.     

CS_2飞秒超快非线性特性的实验研究

采用中心波长800 nm、脉宽30 fs的超短激光脉冲,通过飞秒光开关技术对CS_2的飞秒超快非线性特性进行了实验研究.在探测光强与抽运光强比为1∶10时,得到了较理想的光克尔时间分辨曲线.通过实验测定的光克尔信号强度与激发光和探测光偏振方向夹角的依赖关系表明:30 fs的超短激光脉冲激发CS_2的克尔信号主要是源于光诱导双折射效应,而非用200 fs的超短激光脉冲时来自瞬态栅的自衍射效应.     

Parametric study of plasma active medium and gain saturation region in a Ne-like soft X-ray laser

Plasmas created by the interaction of high power optical laser with a target surface can be used as a source of soft X-ray lasers. Plasma and pump laser characteristics play significant role in achieving high gain coefficient for such plasma based on soft X-ray lasers. In the present work, the plasma active medium parameters for germanium element at a wavelength of 19.6 nm irradiated by a double-pulse pump laser have been studied using MED103 hydrodynamic code. For this purpose, first, the effects of laser intensity, pulse width and delay time of two pulses on the gain coefficient have been investigated and the optimum conditions for the maximum gain extent of Ne-like germanium soft X-ray laser are obtained. Then, in order to calculate the intensity of such high gain lasers in which Linford equation is invalid, we have adopted the general formula of amplified spontaneous emission intensity, which is valid in all range of intensities even at much higher intensities than saturation intensity. Finally, the soft X-ray laser intensities in the saturated areas for different plasma lengths have been calculated. The results show that the output of soft X-ray laser intensity with 294 cm⁻¹ gain coefficient can reach to about several times saturated intensity by applying a 1–2 mm plasma length as the active medium.     

高等植物外周捕光天线LHCⅡ中的超快光动力学过程

利用飞秒抽运探测技术及时间分辨荧光(TRPL)等光谱技术对高等植物LHCⅡ中的超快光动力学过程进行了研究。在其时间分辨荧光光谱中表现出了明显的各向异性特性。实验上观察了LHCⅡ中色素间的能量传递过程,由飞秒动力学发现,单体内Chlb到邻近的Chla之间的能量传递在200～300fs的时间尺度,Chla激子带间的能量弛豫发生在几百飞秒,不同单体Chla分子间能量分布过程在几个皮秒。而时间分辨荧光和飞秒动力学过程中上百皮秒的慢过程归属于不同聚集体间的能量平衡过程或分子构象变化。     

Two-color facility based on a broadly tunable infrared free-electron laser and a subpicosecond-synchronized 10-fs-Ti:sapphire laser

Subpicosecond synchronization between a mirror-dispersion-controlled 10-fs Ti:sapphire laser and the Free-Electron Laser for Infrared Experiments has been achieved. The measured intensity cross correlation between the two lasers is consistent with a jitter of only 400 fs rms. The wide and continuous tunability of the free-electron laser (FEL; 4.2-300mum) combined with ultrashort pulse duration of six optical cycles and high pulse energy of several tens of microjoules makes a series of two-color experiments possible in a previously inaccessible wavelength range. We demonstrate these capabilities by performing a two-color pump-probe experiment to study carrier cooling in GaAs. A FEL tuned from 8 to 17mum is used as the pump, and a synchronized Ti:sapphire laser pulse serves as the probe.     

Progress in the applicability of plasma X-ray lasers

Proposed as satellite-based weapons during the 1980s, X-ray lasing was for a long time only achieved with enormous amounts of pump energy in either nuclear explosions or at kilojoule-class laser installations. During the last few years a tremendous development was achieved, most visible in the realisation of the FEL lasers at DESY and SLAC. As important for a wider applicability is the enormous reduction in pump energy for laser pumped plasma X-ray lasers, which now brings such devices into the range of applications for diagnostics and spectroscopy even in smaller laboratories. Main developments were the transient excitation scheme and the optimized pumping concepts. This paper concentrates on developments at the GSI Helmholtzcenter at Darmstadt aiming towards reliable X-ray laser sources in the range from 50 to several 100 eV. The main driving forces for the laser development at GSI are the possible application for the spectroscopy of Li-like ions in the storage ring ESR and the future storage ring NESR at FAIR, and the interest in novel plasma diagnostics.     

Ultrafast all-solid-state laser technology

Passively mode-locked diode-pumped solid-state lasers can provide practical high-power laser sources with pico- and femtosecond pulse durations. We use semiconductors not only to optically pump but also to cw mode-lock or Q-switch a solid-state laser. A novel saturable absorber design, the Antiresonant Fabry-Perot Saturable Absorber (A-FPSA), allows of using semiconductor saturable-absorber materials even though they are generally not well-matched to the characteristics required for diode-pumped solid-state lasers, i.e., the semiconductors tend to have too much optical loss, a too low saturation intensity, and a too low damage threshold. This paper gives an overview of passively mode-locked ion-doped crystalline solid-state lasers. In particular, we present a quantitative discussion of A-FPSA mode locking, and compare A-FPSA mode locking with other passive mode locking techniques such as KLM (Kerr Lens Mode locking).