Synthesis and characterisation of yttrium complexes supported by the beta-diketiminate ligand {ArNC(CH3)CHC(CH3)NAr}- (Ar = 2,6-Pr(i)2C6H3)

Reaction of YI(3)(THF)(3.5) with one equivalent of the potassium beta-diketiminate (BDI) complex [HC{C(CH(3))NAr}(2)K] (Ar = 2,6-Pr(i)(2)C(6)H(3)) affords the monomeric, mono-substituted yttrium BDI complex [HC{C(CH(3))NAr}(2)YI(2)(THF)] in good yield. Reaction of with DME affords [HC{C(CH(3))NAr}(2)YI(2)(DME)] in quantitative yield, which is monomeric also. Reaction of the primary terphenyl phosphane Ar*PH(2) (Ar* = 2,6-(2,4,6-Pr(i)(3)C(6)H(2))(2)C(6)H(3)) with potassium hydride, and recrystallisation from hexane, affords the potassium primary terphenyl phosphanide complex [{Ar*P(H)K(THF)}(2)] in high yield. Compound is dimeric in the solid state, constructed around a centrosymmetric K(2)P(2) four-membered ring, the coordination sphere of potassium is supplemented with an eta(6) K[dot dot dot]C(aryl) interaction. The reaction of with one molar equivalent of in THF affords the THF ring-opened compound [HC{C(CH(3))NAr}(2)Y{O(CH(2))(4)P(H)Ar*}(I)(THF)]. Compound is formed as a mixture of endo(OR) and exo(OR) isomers (: = approximately 2 : 1) which may be separated by fractional crystallisation from hexane-toluene to give pure . Attempted alkylation of with two equivalents of KCH(2)Si(CH(3))(3) affords the potassium yttriate complex [Y{micro-eta(5):eta(1)-ArNC(CH(3))[double bond, length as m-dash]CHC([double bond, length as m-dash]CH(2))NAr}(2)K(DME)(2)] in moderate yield; contains two dianionic dianilide ligands, which are derived from C-H activation of a backbone methyl group, each bonded eta(5) to yttrium in the solid state. The reaction of with one equivalent of KC(8) affords [{HC(C[CH(3)]NAr)(2)YI(micro-OCH(3))}(2)], derived from C-O bond activation of DME, as the only isolable product in very low yield. Compounds , , , , , and have been characterised by single crystal X-ray diffraction, NMR spectroscopy and CHN microanalyses.     

Organoiron compounds derived from the indium 'carbene analogues', [In(N(Ar)C(Me))2CH] (Ar = dipp = 2,6-iPr2C6H3; = Mes = 2,4,6-Me3C6H2)

Oxidative insertion of the In(I) 'carbene analogues', [In{N(Dipp)C(Me))2CH] (Ar = Dipp = 2,6-iPr2C6H3; Ar = Mes = 2,4,6-Me3C6H2) into the Fe-I bond of [CpFe(CO)2I] occurred cleanly and under mild conditions to yield the In(III) compounds [CH((CH3)2CN-2,6-iPr2C6H3)2In(I)FeCp(CO)2] and [CH( (CH3)2CN-2,4,6-Me3C6H3)2In(I)FeCp(CO)2], which have been fully characterised in solution and the solid state. Attempts to abstract the iodide anion from [CH( (CH3)2CN-2,6-iPr2C6H3)2In(I)FeCp(CO)2] to form cationic species containing a coordinated indium diyl were unsuccessful and resulted in a complex mixture of products from which two ionic species were isolated. Neither cation was found to contain indium by X-ray crystallographic analysis. These observations were indicative of ill-defined decomposition pathways as have been noted by previous workers. A further attempt to form a cationic iron species containing a coordinated [In(N(Dipp)C(Me) )2CH] fragment resulted in oxidation of the iron centre from Fe(II) to Fe(III), with deposition of indium metal, and the isolation of a cationic Fe(III) beta-diketiminate complex.     

Syntheses and structures of the arylaluminum chalcogenides (ArAlE)2 (Ar = 2-(NEt2CH2)-6-MeC6H3, E = Se; Ar = 2,6-(NEt2CH2)2C6H3, E = Se, Te)

Two intramolecular stabilized arylaluminum dihydrides, (2-(NEt2CH2)-6-MeC6H3)AlH2 (1) and (2,6-(NEt2CH2)2C6H3)AlH2 (2), were prepared by reducing the corresponding dichlorides with an excess of LiAlH4 in diethyl ether. Reactions of 1 and 2 with elemental selenium afforded the dimeric arylaluminum selenides [(2-(NEt2CH2)-6-MeC6H3)AlSe]2 (3) and [(2,6-(NEt2CH2)2C6H3)AlSe]2 (4). Reaction of 2 with metallic tellurium gave the dimeric arylaluminum telluride [(2,6-(NEt2CH2)2C6H3)AlTe]2 (5). The possible reaction pathway is discussed, and molecular structures determined by single-crystal X-ray analyses are presented for 3 and 5.     

Thermally Stable Heterobinuclear Bivalent Group 14 Metal Complexes Ar2M−Sn[1,8-(NR)2C10H6] (M=Ge,Sn; Ar=2,6-(Me2N)2C6H3; R=CH2tBu)

The first thermally robust Ge ^II −Sn ^II compound 1 and the structurally characterized Sn^II-Sn^II analogue 2 , which maintain their structural integrity in solution, were obtained by treating MAr₂ (M=Ge, Sn; Ar=2,6-(Me₂N)₂C₆H₃) with Sn[1,8-(NR₂)₂C₁₀H₆] (R=CH₂tBu). On the basis of structural and spectroscopic data, the M−Sn bond is regarded as the interaction of a MAr₂ donor with an Sn[1,8-(NR₂)₂C₁₀H₆] acceptor.     

Hydrogenation of C=C and C=N Bonds of the Amide-Imine Ligand in the Metal Coordination Sphere in the Reaction of Yttrium Bis(alkyl) Complex [2,6-iso-Pr2C6H3NC(=CH2)C(Me)=NC6H3-iso-Pr2-2,6]Y(CH2SiMe3)2(THF) with Molecular Hydrogen

Russian Journal of Coordination Chemistry - On treatment of the yttrium bis(alkyl) complex [ArNC(=CH2)C(Me)=NAr]Y(CH2SiMe3)2(THF) (I, Ar = C6H3-iso-Pr2-2.6) containing an amide-imine ligand, with...     

Neodymium monochloride and monoallyl complexes {2-[Ph2P(O)]C6H4NC(But)N(2,6-Me2C6H3)}2NdR (R = Cl,CH2CH=CH2) with the tridentate amidinate ligand in the catalysis of ring-opening polymerization of cyclic esters

Russian Chemical Bulletin - The reaction of tridentate amidine 2-[Ph2P(O)]C6H4NHC(But)=N(2,6-Me2C6H3) (1) containing the side-chain donor group Ph2P=O with NdCl[N(SiMe3)2]2 (2) in a molar ratio...     

Yttrium complexes incorporating the chelating diamides [ArN(CH2)xNAr]2- (Ar = C6H3-2,6-iPr2, x= 2, 3) and their unusual reaction with phenylsilane

Novel yttrium chelating diamide complexes [(Y[ArN(CH(2))(x)NAr](Z)(THF)(n))(y)] (Z = I, CH(SiMe(3))(2), CH(2)Ph, H, N(SiMe(3))(2), OC(6)H(3)-2,6-(t)Bu(2)-4-Me; x = 2, 3; n = 1 or 2; y = 1 or 2) were made via salt metathesis of the potassium diamides (x = 3 (3), x = 2 (4)) and yttrium triiodide in THF (5,10), followed by salt metathesis with the appropriate potassium salt (6-9, 11-13, 15) and further reaction with molecular hydrogen (14). 6 and 11(Z = CH(SiMe(3))(2), x = 2, 3) underwent unprecedented exchange of yttrium for silicon on reaction with phenylsilane to yield (Si[ArN(CH(2))(x)NAr]PhH) (x = 2 (16), 3) and (Si[CH(SiMe(3))(2)]PhH(2)).     

The Molybdenum(V) and Tungsten(VI) Oxoazides [MoO(N3)3], [MoO(N3)3⋅2 CH3CN], [(bipy)MoO(N3)3], [MoO(N3)5]2−, [WO(N3)4], and [WO(N3)4⋅CH3CN]

A series of novel molybdenum(V) and tungsten(VI) oxoazides was prepared starting from [MOF₄] (M=Mo, W) and Me₃SiN₃. While [WO(N₃)₄] was formed through fluoride–azide exchange in the reaction of Me₃SiN₃ with WOF₄ in SO₂ solution, the reaction with MoOF₄ resulted in a reduction of Mo^VI to Mo^V and formation of [MoO(N₃)₃]. Carried out in acetonitrile solution, these reactions resulted in the isolation of the corresponding adducts [MoO(N₃)₃?2 CH₃CN] and [WO(N₃)₄?CH₃CN]. Subsequent reactions of [MoO(N₃)₃] with 2,2′‐bipyridine and [PPh₄][N₃] resulted in the formation and isolation of [(bipy)MoO(N₃)₃] and [PPh₄]₂[MoO(N₃)₅], respectively. Most molybdenum(V) and tungsten(VI) oxoazides were fully characterized by their vibrational spectra, impact, friction and thermal sensitivity data and, in the case of [WO(N₃)₄?CH₃CN], [(bipy)MoO(N₃)₃], and [PPh₄]₂[MoO(N₃)₅], by their X‐ray crystal structures.     

A bis(trimethylstannyl)amido complex of titanium. The synthesis and structures of [TiCl2(OC6H3Ph2-2,6)2] and [TiCl{N(SnMe3)2}(OC6H3Ph2-2,6)2]

Reaction of TiCl₄ with 2,6-diphenylphenol in toluene gives [TiCl₂(OC₆H₃Ph₂-2,6₂], and this reacts with (Me₃Sn)₃N to give [TiCl{N(SnMe₃)}(OC₆H₃Ph₂-2,6)₂]. The crystals structures of both complexes have been determined.     

Syntheses and structural study of trinuclear iron acetates [Fe3O(CH3COO)6(H2O)3]Cl· 6H2O and [Fe3O(CH3COO)6(H2O)3] [FeCl4]· 2CH3COOH

The structure of two trinuclear iron acetates [Fe₃O(CH₃COO)₆(H₂O)₃]Cl· 6H₂O (I) and [Fe₃O(CH₃COO)₆(H_2O)₃][FeCl₄] · 2CH₃COOH (II) was determined by X-ray diffraction analysis. Crystals I and II are ionic and belong to the orthorhombic system with parameters a = 13.704(3), b = 23.332(5), c = 9.167(2) Å, R = 0.0355, space goup P2₁2₁2 for I and a = 10.145(4), b = 15.323(6), c = 22.999(8) Å, R = 0.0752, space group Pbc2₁ for II. The complex cation [Fe₃O(CH₃COO)₆(H₂O)₃]⁺ has a μ₃-O-bridged structure typical for trinuclear iron (III) compounds. As shown by Mössbauer spectroscopy, the iron(III) ions are in the high-spin state. In trinuclear cations, antiferromagnetic exchange interaction takes place between the Fe(III) ions with the exchange parameter J = -26.69 cm^?1 for II (Heisenberg-Dirac-Van Vleck model for D_3h, symmetry).     

Synthesis of homoleptic tris(organo-chelate)iridium(III) complexes by spontaneous ortho-metallation of electronrich olefin-derived N,N′-diarylcarbene ligands and the X-ray structures of fac-[Ir{CN(C6H4Me-p) (CH2)2NC6H3Me-p}3] and mer-Ir{CN(C6H4Me-p)(CH2)2NC6H3Me-p}2 {CN(C6H4Me-p)(CH2)2NC6H4Me-p}Cl (a product of HCl cleavage)

Treatment of [{Ir(COD)(μ-Cl)}₂] with excess of the electron-rich olefin [$\text{CN(Ar)(CH}{}_2\text{)}{}_2\text{N}$Ar]₂ (abbreviated as (L^Ar)₂, Ar = C₆H₄Me-p or C₆H₄OMe-p) affords the ortho-metallated tricycle [$\text{Ir(L}{}^{\mathrm{A}}\text{r}$)₃], which for Ar = C₆H₄Me-p (Ia) with HCL yields [$\text{Ir(L}{}^{\mathrm{A}}\text{r}$)₂(L^Ar)]Cl (IV); X-ray data show that in IV there is an unexpectedly close Ir?C(o-aryl) contact (2;52(1) Å) involving the “free” L^Ar which compares with an IrC(o-aryl) distance of 2.09(3) Å in Ia or 2.07(3) Å in the ortho-metallated L^Ar ligand of complex IV.