Dielectric and piezoelectric properties of Li-substituted lead-free (Bi0.5Na0.5)TiO3–(Bi0.5K0.5)TiO3–BaTiO3 ceramics

Lead-free 0.79(Bi_0.5Na_0.5)TiO₃–0.14[Bi_0.5(K_0.5−xLi_x)]TiO₃–0.07BaTiO₃ (BNBK79 + xLi, x = 0.0, 0.1, 0.2, 0.25, 0.3, and 0.4) ceramics were prepared by conventional solid state reaction process. The crystalline structures and surface morphologies are investigated by X-ray diffraction method and scanning electron microscopy. Dielectric and piezoelectric properties were measured. With increasing of lithium substitution, the Curie temperatures of BNBK79 + xLi ceramics increase, but the maximum value of the dielectric constant decreases. And a relatively large remnant polarization of 17.6 μC/cm² and 157 pC/N of d₃₃ has been obtained when x = 0.3.     

Ionic conductance of composite electrolytes based on network polymer with ceramic powder

Effects of ceramic fillers (α-Al₂O₃, γ-Al₂O₃ and BaTiO₃) have been investigated on the ionic conductance of polymeric complexes consisting of poly(ethylene oxide)-modified poly(methacrylate) (PEO-PMA) and lithium bis(trifluoromethylsulfonyl)imide, Li(CF₃SO₂)₂N, and ceramic powder. The addition of ceramic powder increased the ionic conductivity over an ambient temperature range. Conductivity of 4.9 × 10^− 5 S cm^− 1 at 333 K (60 °C) was obtained for the composite containing 15 wt.% α-Al₂O₃ prepared by photo-polymerization. The optimum content of Al₂O₃ was different among the methods of polymerization. The highest conductivity was obtained for the composite containing 5 wt.% of α-, or γ-Al₂O₃ prepared by thermal polymerization. The addition of the ceramic filler scarcely influenced the thermal properties of the polymer matrix. XRD and NMR experiments showed that the ionic mobility could be enhanced in the composites by addition of α-Al₂O₃. The addition of small amounts of ferroelectric BaTiO₃ also increased the ionic conductivity of the polymeric complex, but its extent was smaller than the case of the Al₂O₃ addition.     

Enhancement microwave dielectric properties of La(Mg0.5Sn0.5)O3 ceramics by substituting La3+ with Sm3+

The microwave dielectric properties of La_1?xSm_x(Mg_0.5Sn_0.5)O₃ ceramics were examined with a view to their exploitation for mobile communication. The La_1?xSm_x(Mg_0.5Sn_0.5)O₃ ceramics were prepared by the conventional solid-state method with various sintering temperatures. The X-ray diffraction patterns of the La_0.97Sm_0.03(Mg_0.5Sn_0.5)O₃ ceramics revealed no significant variation of phase with sintering temperatures. Apparent density of 6.59 g/cm³, dielectric constant (ε_r) of 19.9, quality factor (Q×f) of 70,200 GHz, and temperature coefficient of resonant frequency (τ_f) of ?77 ppm/°C were obtained for La_0.97Sm_0.03(Mg_0.5Sn_0.5)O₃ ceramics that were sintered at 1500 °C for 4 h. The dielectric constant, and τ_f of La_0.97Sm_0.03(Mg_0.5Sn_0.5)O₃ ceramics were almost independent with the sintering temperature as the sintering temperature varied from 1450 to 1600 °C.     

Development of perovskite and phase transition in lead cobalt niobate modified lead zirconate titanate system

Ferroelectric lead zirconate titanate–lead cobalt niobate ceramics with the formula (1 − x)Pb(Zr_1/2Ti_1/2)O₃–xPb(Co_1/3Nb_2/3)O₃ where x = 0.0–0.5 were fabricated using a high temperature solid-state reaction method. The formation process, the structure and homogeneity of the obtained powders have been investigated by X-ray diffraction method as well as the simultaneous thermal analysis of both differential thermal analysis (DTA) and thermogravimetry analysis (TGA). It was observed that for the binary system (1 − x)Pb(Zr_1/2Ti_1/2)O₃–xPb(Co_1/3Nb_2/3)O₃, the change in the calcination temperature is approximately linear with respect to the PCoN content in the range x = 0.0–0.5. In addition, X-ray diffraction indicated a phase transformation from a tetragonal to a pseudo-cubic phase when the fraction of PCoN was increased. The dielectric permittivity is remarkably increased by increasing PCoN concentration. The maximum value of remnant polarization P_r (25.3 μC/cm²) was obtained for the 0.5PZT–0.5PCoN ceramic.     

Electrical conductivity and thermal expansion of the oxy-cuspidine Gd4Al2O9 substituted with Ca and Sr

The series of Gd_4 ? xM_xAl₂O_9 ? x/2 (M = Ca, Sr) with x = 0, 0.01, 0.05, 0.10 and 0.25 was prepared by the citrate complexation method. Both Gd_4 ? xCa_xAl₂O_9 ? x/2 and Gd_4 ? xSr_xAl₂O_9 ? x/2 show the monoclinic cuspidine structure with space group of P2₁/c up to 0.05–0.1 and 0.01–0.05 mol for Ca and Sr, respectively. Beyond the substitution limit of Gd₄Al₂O₉, GdAlO₃ and SrGd₂Al₂O₇ appear as additional phases. The highest electrical conductivity obtained at 900 °C yielded σ = 1.49 × 10^? 4 S/cm for Gd_3.95Ca_0.05Al₂O_8.98. In comparison, the conductivity of pure Gd₄Al₂O₉ was σ = 1.73 × 10^? 5 S/cm. The conductivities determined are in a similar range as those of other cuspidine materials investigated previously. The thermal expansion coefficient of Gd₄Al₂O₉ at 1000 °C was 7.4 × 10^? 6 K^? 1. The phase transition between 1100 and 1200 °C reported earlier changes with increasing substitution of Ca and Sr.     

Electromagnetic wave absorption properties of ε-Fe3N/Y2O3 nanocomposites derived from Y2Fe17 intermetallic compound

The electromagnetic wave absorption properties of ε-Fe₃N/Y₂O₃ nanocomposites were characterized in a frequency range of 0.05–20.05 GHz. The imaginary part of relative permeability μ_r″ exhibited “twin peak” dispersion and μ_r″ value retained high over a 0.5–10 GHz range. The real part (ε_r′) and imaginary part (ε_r″) of relative permittivity almost kept a low constant in a region of 0.5–10 GHz, respectively. As a result, the resin composites with 51 vol% ε-Fe₃N/Y₂O₃ powders exhibited excellent electromagnetic wave absorption properties (RL<−20 dB) in a frequency range of 0.6–4.4 GHz, with a thickness of 3.3–19.3 mm. A minimum reflection loss of −55 dB was observed at 1.8 GHz with an absorber thickness of 7.05 mm.     

Al-26 diffusion measurement in 2/1-mullite by means of Secondary Ion Mass Spectrometry

Aluminium is an important constituent of advanced structural and functional ceramics, as well as of geological materials in the upper mantle. Aluminium has only one single stable isotope and radioisotopes which are difficult to apply routinely in radiotracer diffusion experiments. Therefore, it is a methodological challenge to measure aluminium diffusivities. Our novel approach consists in using the long-life radioactive isotope ²⁶Al as a pseudo-stable isotope whose depth distribution can be analysed with Secondary Ion Mass Spectrometry after a diffusion experiment. For our demonstration we chose mullite (Al_4+2xSi_2−2xO_10−x, 0.2< x < 0.5) which is an important candidate for advanced structural and functional ceramics with some outstanding properties: low thermal expansion, low thermal conductivity, and excellent creep resistance. The method is universally applicable to the huge family of aluminium containing oxides.     

Effects of Zr/Ti ratio on dielectric and ferroelectric properties of 0.8Pb(ZrxTi1−x)O3–0.2Pb(Co1/3Nb2/3)O3 ceramics

The influences of Zr/Ti ratio on electrical properties of the 0.8Pb(Zr_xTi_1−x)O₃–0.2Pb(Co_1/3Nb_2/3)O₃ ceramics prepared by a mixed-oxide method (with x = 0.46, 0.48, 0.50, 0.52, and 0.54) have been investigated in order to identify the morphotropic phase boundary composition in this system. With XRD analysis, the crystal structure of dense specimens appeared to change gradually from tetragonal to rhombohedral with increasing Zr content. The dielectric properties measurements showed a maximum dielectric constant at x = 0.50, while the transition temperature decreased with increasing Zr content in the system. Moreover, all ceramics showed diffused phase transition behaviors with a minimum diffusivity at x = 0.50. In addition, the Polarization–Electric field (P–E) hysteresis loops of the ceramic systems also changed significantly with the Zr content. Interestingly, the loop squareness parameter reached maximum around x = 0.50. Other ferroelectric hysteresis parameters showed noticeable change at x = 0.50. These results clearly showed the significance of Zr/Ti ratio in controlling the electrical properties of the PZT–PCN ceramic systems.     

Structural and electrochemical properties of LiNi0.5Mn0.5 − xAlxO2 (x = 0, 0.02, 0.05, 0.08, and 0.1) cathode materials for lithium-ion batteries

Layered LiNi_0.5Mn_0.5 ? xAl_xO₂ (x = 0, 0.02, 0.05, 0.08, and 0.1) series cathode materials for lithium-ion batteries were synthesized by a combination technique of co-precipitation and solid-state reaction, and the structural, morphological, and electrochemical properties were examined by XRD, FT-IR, XPS, SEM, CV, EIS, and charge–discharge tests. It is proven that the aliovalent substitution of Al for Mn promoted the formation of LiNi_0.5Mn_0.5 ? xAl_xO₂ structures and induced an increase in the average oxidation number of Ni, thereby leading to the shrinkage of the lattice volume. Among the LiNi_0.5Mn_0.5 ? xAl_xO₂ materials, the material with x = 0.05 shows the best cyclability and rate ability, with discharge capacities of 219, 169, 155, and 129 mAh g^? 1 at 10, 100, 200, and 400 mA g^? 1 current density respectively. Cycled under 40 mA g^? 1 in 2.8–4.6 V, LiNi_{0. 5}Mn_0.45Al_0.05O₂ shows the highest discharge capacity of about 199 mAh g^? 1 for the first cycle, and 179 mAh g^? 1 after 40 cycles, with a capacity retention of 90%. EIS analyses of the electrode materials at pristine state and state after first charge to 4.6 V indicate that the observed higher current rate capability of LiNi_{0. 5}Mn_0.45Al_0.05O₂ can be understood due to the better charge transfer kinetics.     

Synthesis and electrical transport properties of Lu2+xTi2−xO7−x/2 oxide-ion conductors

The Lu_2+xTi_2−xO_7−x/2 (x = 0; 0.052; 0.096; 0.286; 0.44; 0.63; 33.3–49 mol% Lu₂O₃) nanoceramics with partly disordered pyrochlore-type structure are prepared by sintering freeze-dried powders obtained by a co-precipitation technique with 1600 °C annealing. Similar to pyrochlore-like compositions in the zirconate system, some of the new titanates are good oxide-ion conductors in air. The new solid-state electrolytes have oxide-ion conductivity in the interval of 1.0 × 10^− 3 – 2.5 × 10^− 3 S/cm at 740 °C in air. This value of conductivity is comparable with that of ZrO₂/Y₂O₃ ceramics. The conductivity of Lu_2+xTi_2−xO_7−x/2 depends on the chemical composition. The highest ionic conductivity is exhibited by nearly stoichiometric Lu_2+xTi_2−xO_7−x/2 (x = 0.096; 35.5 mol% Lu₂O₃) material containing ∼ 4.8 at.% Lu_Ti anti-site defects.     

Field-assisted sustainable O− ion emission from fluorine-substituted 12CaO·7Al2O3 with improved thermal stability

We examined the electric field-assisted thermionic emission of atomic oxygen radical anion (O^?) in a vacuum from fluorine-substituted derivatives of 12CaO·7Al₂O₃ (C12A7) with a composition of (12 ? x)CaO·7Al₂O₃·xCaF₂ (0 ≤ x ≤ 0.8). Unsubstituted C12A7 easily decomposed into 5CaO?3Al₂O₃ (C5A3) and 3CaO?Al₂O₃ (C3A) above 830 °C during the emission experiment in a vacuum. The decomposition temperature range became narrower as the amount of F^? ion substitution increased, e.g. the sample with x = 0.4 kept a single phase after the emission experiment at 900 °C. The emitted anionic species from the x = 0.4 sample were dominated by O^? ions (～ 92%) together with a small amount of O₂^? ions (～ 4%) and F^? ions (～ 4%). The absence of an O₂ gas supply to the opposite side of the emission surface led to a nearly steady co-emission of O^? ions and electrons with a ratio of < 1/1. The O₂ gas supply markedly enhanced the O^? ion emission, and suppressed the electron emission. A sustainable and high-purity O^? ion emission with a current density of 11 nA cm^? 2 was achieved at 830 °C with the supply of 40 Pa O₂ gas. The similarity in these emission features to the unsubstituted C12A7, together with the improved thermal stability demonstrates that the F^? ion-substituted C12A7 is a promising material for higher intensity O^? ion emission at higher temperatures.     

Effect of Fe doping on the room temperature ferromagnetism in chemically synthesized (In1−xFex)2O3 (0 ⩽ x ⩽ 0.07) magnetic semiconductors

Observation of room temperature ferromagnetism in Fe doped In₂O₃ samples (In_1−xFe_x)₂O₃ (0 ⩽ x ⩽ 0.07) prepared by co-precipitation technique is reported. Lattice parameter obtained from powder X software shows distinct shrinkage of the lattice constant indicating an actual incorporation of Fe ions into the In₂O₃ lattice. X-ray diffraction data measurements show that the entire sample exhibits single phase polycrystalline behavior. SEM micrographs showed the prepared powder was in the range 25–36 nm. SEM EDS mapping showed the presence of Fe and In ions in the Fe doped In₂O₃ sample. The highest remanence magnetization moment (6.624 × 10⁻⁴ emu/g) is reached in the sample with x = 0.03.     

Effect of strontium addition on europium-doped ceria properties

Nanopowders of composition Ce_0.9(Eu_1 ? xSr_x)_0.1O_2 ? δ (x = 0, 0.1, 0.3, 0.5, and 0.7) were prepared by the Pechini method. The microstructure and properties of powders and sintered ceramics are discussed in this paper. X-ray diffraction (XRD) and Raman spectroscopy revealed that all powders calcined at 550 °C were single phase, with the cubic fluorite-type structure. The good sintering properties of the synthesized nanopowders allowed us to obtain dense ceramics (> 96% theoretical density). Dense ceramics with density higher than 96% of the theoretical value were obtained without the need of sintering aid. The morphology of the sintered ceramics was evidenced by scanning electron microscopy (SEM). The ionic conductivities of doped and co-doped ceria ceramics were investigated as a function of temperature by using AC impedance spectroscopy in the temperature range 250–800 °C. Impedance spectra indicate a significant diminution of grain boundary resistance after partial substitution of Eu with Sr in europia-doped ceria sample, especially in the low and intermediate-temperature range. The best conductivity was evidenced for the Ce_0.9Eu_0.09Sr_0.01O_2 ? δ composition.     

Ionic and electronic conductivities,stability and thermal expansion of La10 − x(Si,Al)6O26 ± δ solid electrolytes

Apatite-type La_10 − xSi_6 − yAl_yO_{27 − 3x/2 − y/2} (x = 0–0.33; y = 0.5–1.5) exhibit predominant oxygen ionic conductivity in a wide range of oxygen partial pressures. The conductivity of silicates containing 26.50–26.75 oxygen atoms per formula unit is comparable to that of gadolinia-doped ceria at 770–870 K. The average thermal expansion coefficients are (8.7–10.8) × 10^− 6 K^− 1 at 373–1273 K. At temperatures above 1100 K, silicon oxide volatilization from the surface layers of apatite ceramics and a moderate degradation of the ionic transport with time are observed under reducing conditions, thus limiting the operation temperature of Si-containing solid electrolytes.     

Novel clays: Solid-state synthesis,characterization and cation exchange selectivity

Several novel swelling mica-type clays have been synthesized by solid-state processes. Synthetic clays of ideal compositions such as Na₂Si₆Al₂Mg₆O₂₀F₄ · xH₂O (Na-2-mica), Na₃Si₅Al₃Mg₆O₂₀F₄ · xH₂O (Na-3-mica) and Na₄Si₄Al₄Mg₆O₂₀F₄ · xH₂O (Na-4-mica) have been prepared and characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and ²⁷Al and ²⁹Si solid-state magic angle spinning nuclear magnetic resonance (MASNMR) spectroscopy. Powder XRD showed that all syntheses yielded water swollen micas with c-axis spacing of ∼1.2 nm except in the case of Na-2-mica which also showed a small peak of anhydrous mica phase with a c-axis spacing of 0.96 nm. Solid-state ²⁷Al MASNMR spectroscopy revealed that almost all the Al is present in the tetrahedral environment of the different micas. Solid-state ²⁹Si MASNMR spectroscopy revealed different Si (Al) nearest neighbor environments depending upon the composition of the various micas. Selective cation exchange studies were performed on the various micas using 0.5 N NaCl solution containing 12.9 ppm Sr²⁺ or 8.12 ppm of La³⁺. The results showed, for the first time, that Na-3-mica has a high selectivity for the trivalent cation tested. The previously reported high selectivity of these synthetic micas for the divalent cations has been confirmed. These selective cation exchange studies are of relevance in cation separations from drinking and waste waters.     

Effect of Li-substitution on piezoelectric and ferroelectric properties of (Bi0.92Na0.92−xLix)0.5Ba0.06Sr0.02TiO3 lead-free ceramics

New lead-free ceramics (Bi_0.92Na_0.92−xLi_x)_0.5Ba_0.06Sr_0.02TiO₃ have been fabricated by a conventional ceramic technique and their electrical properties have been studied. X-ray diffraction studies reveal that Li⁺, Ba²⁺ and Sr²⁺ diffuse into the Bi_0.5Na_0.5TiO₃ lattices to form a new solid solution with a pure perovskite structure. The partial substitution of Li⁺ for Na⁺ increases the remanent polarization P_r of the ceramics. Because of the large P_r and low coercive field E_c, the ceramics with x = 0.075–0.125 exhibit excellent piezoelectric properties: d₃₃ = 189–235 pC/N, k_p = 33.6–36.3% and k_t = 51.6–54.3%. The ceramics exhibit relaxor behaviors after the substitution of Li⁺ for Na⁺. Our results also suggest that polar and non-polar phases may coexist in the ceramics at temperatures above the depolarization temperature T_d.     

Ferroelectric properties of Pb(Zr1/2Ti1/2)O3–Pb(Zn1/3Nb2/3)O3 ceramics under compressive stress

Effects of compressive stress on the ferroelectric properties of ceramics in PZT–PZN system were investigated. The ceramics with a formula (1−x)Pb(Zr_1/2Ti_1/2)O₃–xPb(Zn_1/3Nb_2/3)O₃ or (1−x)PZT–(x)PZN (x = 0.1–0.5) were prepared by a conventional mixed-oxide method. The ferroelectric properties under the compressive stress of the PZT–PZN ceramics were observed at the stress levels up to 170 MPa using a compressometer in conjunction with a modified Sawyer–Tower circuit. It was found that with increasing compressive stress the area of the ferroelectric hysteresis (P–E) loops, the saturation polarization (P_sat), the remnant polarization (P_r), and the coercive field (E_c) decreased. These results were interpreted through the non-180° ferroelastic domain switching processes.     

Polyphosphazene based composite polymer electrolytes

Composite salt-in-polymer electrolyte membranes were prepared from poly[(bis(2-methoxyethyl)amino)_1−x(n-propylamino)_x-phosphazene] (BMEAP) with dissolved LiCF₃SO₃ and dispersed Al₂O₃ nanoparticles (40 nm). Membranes with good mechanical stability were obtained. Low ionic conductivities were found in particle free membranes with maximum conductivities at 10 wt.% LiCF₃SO₃ ranging from 3.1 × 10^− 7 S/cm at 30 °C to 1.8 × 10^− 5 S/cm at 90 °C. For the composite membranes, addition of 2 wt.% Al₂O₃ nanoparticles leads to a steep increase of the conductivity by almost two orders of magnitude as compared to the homogeneous membranes. The highest room temperature conductivity for the investigated BMEAP–LiCF₃SO₃–Al₂O₃ composite systems was 10^− 5 S/cm.     

Dielectric properties of PIN–PT ceramics under compressive stress

Lead indium niobate, Pb(In_1/2Nb_1/2)O₃ or (PIN), is an interesting ferroelectric material, because it can be changed from a disordered state to ordered state by long-time thermal annealing. However, the temperature related to the maximum dielectric constant (T_max) of PIN in relaxor phase is low (at 1 kHz, T_max = 66 °C). In this study, to increasing T_max of PIN, lead titanate, PbTiO₃(PT) was thus added to PIN with compositions (1 − x)PIN–xPT (for x = 0.1–0.5). The influence of stress on the dielectric properties of (1 − x)PIN–xPT ceramics was then investigated. The dielectric properties were measured under various uniaxial compressive stress up to 400 MPa. The results showed that the superimposed compression load reduced the dielectric constant in 0.9PIN–0.1PT. For the other compositions, the dielectric constants first increased with the compressive stress, and then decreased when the stress was further increased up to 400 MPa. The dielectric loss tangent of all composition was found to decrease with increasing compressive stress.     

Oxygen non-stoichiometry and electrical conductivity of Pr2−xSrxNiO4±δ with x = 0–0.5

Oxygen non-stoichiometry and electrical conductivity of the Pr_2−xSr_xNiO_4±δ series with x = 0.0–0.5 were investigated in Ar/O₂ (pO₂ = 2.5 to 21 000 Pa) within a temperature range of 20–1000 °C. The equilibrium values of oxygen non-stoichiometry and electrical conductivity of these nickelates were determined as functions of temperature and oxygen partial pressure (pO₂). The nickelates with x = 0–0.5 appear to be p-type semiconductors in the investigated temperature and pO₂ ranges. The nickelates with x = 0.3–0.5 show very feebly marked pO₂ dependencies of the conductivity. Pr_1.7Sr_0.3NiO_4±δ shows the anomalies of the conductivity versus oxygen partial pressure which can be related to the orthorhombic–tetragonal crystal structure transformations. The conductivity of the Pr_2−xSr_xNiO_4±δ samples correlates with the average oxidation state of the nickel cations. The samples with x = 0.5 have the highest nickel oxidation state (≈ 2.5+), the highest [Ni³⁺]/[Ni²⁺] ratio close to 1 and show the highest conductivity (≈ 120 S/cm) in the whole pO₂ and temperature ranges investigated.