Kinetic studies of the interaction of fatty acids with phosphatidylcholine vesicles (liposomes)

The kinetics of addition of fatty acids (as alkaline solutions of the fatty acid anions) to pre-existing unilamellar phospholipid vesicles (mean diameter 100 nm) has been studied. The phospholipid DMPC (1,2-dimyristoyl-sn-glycero-3-phosphocholine) has been mainly used, together with three fatty acids, oleic acid (cis-9-octadecenoic acid), linoleic acid (cis,cis-9,12-octadecadienoic acid) and capric acid (decanoic acid). Experiments were performed above as well as below the main phase transition temperature (Tm) of DMPC vesicles. The pH chosen to study the fatty acid vesicle interaction (after fatty acid and vesicle mixing) was 8.5 in the case of oleic acid and linoleic acid and 7.4 for capric acid. In the absence of any pre-existing phospholipid vesicles, the addition of alkaline solutions of the fatty acid anions to corresponding buffer solutions of pH 8.5 or 7.4 leads to a partial protonation of the fatty acid anions again resulting in the formation of fatty acid vesicles. This process is rather slow, taking place over a period of hours/days, and the vesicles formed are very polydisperse and include a range of vesicle sizes/shapes. However, in the presence of pre-existing phospholipid vesicles the added fatty acids equilibrate readily within a few minutes and the size of the vesicles that form are then closely related to the size of the originally present phospholipid vesicles; the vesicles formed being generally somewhat larger than the pre-existing vesicles. In the case of the phospholipid DMPC, the mixed fatty acid/phospholipid vesicle system is often formed rather rapidly (particularly above Tm), so that stopped-flow methods have been applied to follow the kinetics of the process. It is proposed that most of the fatty acid molecules are initially rapidly incorporated into the bilayers of the pre-exisiting phospholipid vesicles as monomers, rather than that the added fatty acids form separate fatty acid vesicles. The mean vesicle sizes formed in the systems investigated have been analysed by using dynamic light scattering measurements. The behaviour of the DMPC system was found to be slightly different from the POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) system studied before, but the results are consistent with a model that involves growth and subsequent fission of the mixed vesicles. The study provides further support of the "matrix effect" in this type of system [S. Lonchin, P.L. Luisi, P. Walde, B.H. Robinson, J. Phys. Chem. B 103 (1999) 10910-10916]. The pre-existing DMPC vesicles act as a kind of seed to control the behavior of the system in the presence of added fatty acid anions.     

Stable vesicles composed of monocarboxylic or dicarboxylic fatty acids and trimethylammonium amphiphiles

The self-assembly of cationic and anionic amphiphile mixtures into vesicles in aqueous media was studied using two different systems: (i) decanoic acid and trimethyldecylammonium bromide and (ii) hexadecanedioic acid (a simple bola-amphiphile) and trimethyldecylammonium bromide. The resulting vesicles with varying amphiphile ratios were characterized using parameters such as the critical vesicle concentration, pH sensitivity, and encapsulation efficiency. We also produced and observed giant vesicles from these mixtures using the electroformation method and confocal microscopy. The mixed catanionic vesicles were shown to be more stable than those formed by pure fatty acids. Those containing bola-amphiphile even showed the encapsulation of a small hydrophilic solute (8-hydroxypyrene-1,3,6-trisulfonic-acid), suggesting a denser packing of the amphiphiles. Compression and kinetics analysis of monolayers composed of these amphiphiles mixtures at the air/water interface suggests that the stabilization of the structures can be attributed to two main interactions between headgroups, predominantly the formation of hydrogen bonds between protonated and deprotonated acids and the additional electrostatic interactions between ammonium and acid headgroups.     

Anomalous diffusion of fatty acid vesicles driven by adhesion gradients

The motion of fatty acid vesicles driven by adhesion gradients of a liquid substrate (Langmuir monolayer) has been investigated. Trajectories of the vesicle motion reveal not only heterogeneity among vesicles in different regions of the monolayer but also heterogeneity within single-vesicle trajectories. Trajectories often exhibit complex behaviors such as circular and oscillating ones. Some vesicles exhibit intermittent dynamics that results in jump diffusion trajectories. In many vesicles their mean square displacements and effective diffusion coefficients exhibit a wide range of behaviors: (i) simple Brownian, (ii) subdiffusive, (iii) superdiffusive, and (iv) their combined motions. Even in the resting regime that the vesicle does not move substantially it exhibits active fluctuations due to spatio-temporal variations of the adhesion gradients of the monolayer. The results are compared with those in motor protein-driven transport of micrometer-sized particles bound to the cytoskeletal network and polymerization motor transport in the cell previously reported.     

Model cell membranes: Techniques to form complex biomimetic supported lipid bilayers via vesicle fusion

Vesicle fusion has long provided an easy and reliable method to form supported lipid bilayers (SLBs) from simple, zwitterionic vesicles on siliceous substrates. However, for complex compositions, such as vesicles with high cholesterol content and multiple lipid types, the energy barrier for the vesicle-to-bilayer transition is increased or the required vesicle–vesicle and vesicle–substrate interactions are insufficient for vesicle fusion. Thus, for vesicle compositions that more accurately mimic native membranes, vesicle fusion often fails to form SLBs. In this paper, we review three approaches to overcome these barriers to form complex, biomimetic SLBs via vesicle fusion: (i) optimization of experimental conditions (e.g., temperature, buffer ionic strength, osmotic stress, cation valency, and buffer pH), (ii) α-helical (AH) peptide-induced vesicle fusion, and (iii) bilayer edge-induced vesicle fusion. AH peptide-induced vesicle fusion can form complex SLBs on multiple substrate types without the use of additional equipment. Bilayer edge-induced vesicle fusion uses microfluidics to form SLBs from vesicles with complex composition, including vesicles derived from native cell membranes. Collectively, this review introduces vesicle fusion techniques that can be generalized for many biomimetic vesicle compositions and many substrate types, and thus will aid efforts to reliably create complex SLB platforms on a range of substrates.     

油酸囊泡尺度多分散性及二元醇对其pH窗口的影响

以油酸(OA)为模型脂肪酸, 依据目测激光丁达尔现象在pH滴定曲线上划分相区, 确定OA囊泡化pH窗口为8.2~10.1. 利用光学显微镜、 激光共聚焦显微镜和冷冻刻蚀-透射电子显微镜共同表征了OA囊泡的形貌及粒径, 发现体系中微米和亚微米级的多层囊泡以及纳米级的单层囊泡共存, 呈现尺度多分散性. 用不同链长的短链二元醇辅助OA形成囊泡, 结果表明, 短链二元醇有助于脂肪酸囊泡(FAV)的pH窗口拓宽, 拓宽的方向取决于表面氢键作用方式或疏水插入方式. 在酸性条件下二元醇与FAV相互作用后, 在囊泡表面残留的自由羟基越多, 越有助于拓宽其酸性pH窗口.     

Division and fusion, extension, adhesion, and retraction of vesicles created through Langmuir monolayer collapse: cell-like behavior

The motion of vesicles created through Langmuir monolayer collapse has been investigated. The vesicles grow only in a narrow molecular area range, and they exhibit remarkable, various biological cell-like behaviors such as division (cell division in cell biology, cytokinesis) and self-propulsion (motility). The vesicle division includes some dynamic modes: (i) an expulsion of a single satellite vesicle from an initial vesicle, (ii) a hierarchical and a sequential expulsion of a satellite vesicle, and (iii) a successive expulsion of two satellite vesicles from an initial vesicle. Two neighboring vesicles often show alternate fusion and division between them. Strong shape fluctuations dominate through vesicle division. The vesicles created exhibit distinct motions depending on the molecular area. At a large molecular area where most initial vesicles are created, they show a continuous, random motion on a few tens of micrometers length scale with a strong shape fluctuation and a constant velocity fluctuation profile. At a small molecular area they cease to move and shape fluctuations also become suppressed. At an intermediate molecular area there coexist vesicles with different dynamic modes: some vesicles show random motion similar to that at a large molecular area, but in a less fluctuating manner, while others exhibit a directional motion with an intermittent velocity jump. The directional motion is characterized by three distinct steps, i.e., extension, adhesion, and retraction. The characteristic motion is discussed from the viewpoint of haptotaxis, or the motion driven by adhesion gradients on the monolayer created by the local transfer of charged surfactant molecules between the vesicle and the monolayer, which the vesicle adheres to.     

Investigating the properties of supported vesicular layers on titanium dioxide by quartz crystal microbalance with dissipation measurements

Adsorption of phospholipid vesicles on titanium dioxide was studied by a combination of quartz crystal microbalance with dissipation (QCM-D) and atomic force microscopy techniques. Vesicle size, concentration in solution, and bilayer composition were systematically varied. A strong dependence of the QCM-D response (magnitude of the frequency and dissipation factor shifts) on the vesicle concentration in solution was observed. QCM-D data were compared with a linear viscoelastic model based on the Voight element to determine layer thickness, density, elastic modulus, and viscosity. Based on the results of this comparison, it is proposed that (i) layer thickness and density, as sensed by QCM-D, saturate much earlier (in time) than the actual surface coverage of the vesicles (number of vesicles per unit area); (ii) changes in surface coverage that occur after the density and thickness, as sensed by QCM-D, have saturated, are interpreted by the model as changes in the layer's viscoelastic properties. This is caused by the replacement of the viscous media (water) between the vesicles by viscoelastic media of similar density (vesicles); (iii) viscoelastic properties of layers formed at different vesicle concentrations differ significantly, while the vesicle surface coverage in those layers does not. Based on the comparison between the atomic force microscopy images and QCM-D data acquired at various vesicle concentrations it is proposed that QCM-D response is not directly related to the surface coverage of the vesicles.     

Condensation properties of vesicles formed from an amphiphilic N-phosphorylamino acid

Stable unilamellar vesicles were formed in water under appropriate pH from dispersions of N-(O,O-di-n-hexadecyl)phosphorylalanine, an amphiphilic N-phosphorylamino acid. We found that condensation occurred in the vesicle solution after incubated at 40 degrees C, which may contribute to the stability of the vesicular system. Dipeptide derivative in the vesicle solution was identified by electrospray ionization mass spectrometry (ESI-MS), which suggests the peptide formation without any coupling reagents. Hydrogen bond and electrostatic interactions play important roles in the process of vesicle formation, while the suitable orientation and packing of the amphiphilic molecules at the vesicle/water interface together with certain conformational freedom in the vesicular bilayer are considered to be most favorable for the condensation in ordered systems as vesicles.     

Fatty alcohols or fatty acids as niosomal hybrid carrier: effect on vesicle size, encapsulation efficiency and in vitro dye release

Niosomal hybrid mixtures are prepared with bilayer stabilizer cholesterol from non-ionic surfactants span 20 (HLB value 8.6), span 60 (HLB 4.7) and span 85 (HLB 1.8) in presence of dicetyl phosphate (DCP) where fatty acids or fatty alcohols (C14, C16 and C18) are used as carrier. Hybrid mixtures upon hydration with aqueous phosphate buffer (pH 7.4) spontaneously produce vesicular phase which can encapsulate 5(6)-carboxyfluorescein (CF). Effect of fatty alcohols and fatty acids on the vesicle size has been studied by dynamic light scattering (DLS), freeze-fracture scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Release rates of CF from vesicular suspensions are found to be dependent on carriers as well as surfactants used. Fatty acid coated hybrids form large multilamellar vesicles (LMV) (size range 10-15 microm) where as fatty alcohol coated hybrid systems form small multilamellar vesicles (SMV) with an average diameter of 400 nm, in all cases vesicles are polydisperse (PI approximately 0.9) in nature.     

Kinetics of breakdown of vesicles from didodecyldimethylammonium bromide induced by single chain surfactants and by osmotic stress in aqueous solution

Didodecyldimethylammonium bromide (DDAB) forms vesicles spontaneously by simple solubilization of the solid into water at a concentration of ≈2.5 mM. Vesicles can be observed by the increase in turbidity of the aqueous solution of DDAB and by the increase in absorbance (at λ_max=490 nm) of a lipophilic dye (Sudan III) solubilized into the vesicular bilayer. This vesicle system has been perturbed by addition of single-chain surfactants in order to study the transition from a vesicle-stable region to a mixed-micelle region. Vesicle breakdown involves the initial incorporation of a single-chain surfactant into the vesicular bilayer, followed by subsequent disintegration of the vesicle. The progress of reaction has been observed by monitoring turbidity changes using a stopped-flow spectrophotometer. The rate of breakdown of vesicles depends on the concentration and hydrophobic properties of the added single-chain surfactant. In addition, hypertonic and hypotonic osmotic stresses have been investigated.     

Bioinspired vesicle restraint and mobilization using a biopolymer scaffold

Biology employs vesicles to package molecules (e.g., neurotransmitters) for their targeted delivery in response to specific spatiotemporal stimuli. Biology is also capable of employing localized stimuli to exert an additional control on vesicle trafficking; intact vesicles can be restrained (or mobilized) by association with (or release from) a cytoskeletal scaffold. We mimic these capabilities by tethering vesicles to a biopolymer scaffold that can undergo (i) stimuli-responsive network formation (for vesicle restraint) and (ii) enzyme-catalyzed network cleavage (for vesicle mobilization). Specifically, we use the aminopolysaccharide chitosan as our scaffold and graft a small number of hydrophobic moieties onto its backbone. These grafted hydrophobes can insert into the bilayer to tether vesicles to the scaffold. Under acidic conditions, the vesicles are not restrained by the hydrophobically modified chitosan (hm-chitosan) because this scaffold is soluble. Increasing the pH to neutral or basic conditions allows chitosan to form interpolymer associations that yield a strong, insoluble restraining network. Enzymatic hydrolysis of this scaffold by chitosanase cleaves the network and mobilizes intact vesicles. Potentially, this approach will provide a controllable means to store and liberate vesicle-based reagents/therapeutics for microfluidic/medical applications.     

Association of octyl-modified poly(acrylic acid) onto unilamellar vesicles of lipids and kinetics of vesicle disruption

Water-soluble polymers containing a few hydrophobic anchors are known to bind onto lipid vesicles and are used as stabilizers of liposome-based formulas. In contrast, polymers with high hydrophobicity destabilize the lipid bilayers. With macromolecules of intermediate hydrophobic/hydrophilic balance, a gradual sweep of the stabilization-destabilization capacity can be achieved and is considered as promising triggered systems for drug release, although the mechanism of permeabilization and membrane breakage using polymers is essentially conjectural to date. As a model system, we used short octyl-modified poly(acrylic acid)s (MW 8000 g/mol) sensitive to pH, temperature, and ionic strength in conjunction with small unilamellar vesicles mainly comprised of DPPC or egg-PC. Kinetics of vesicle fragmentation was followed using static and dynamic light scattering. Polymer adsorption was studied by nonradiative energy transfer between pyrene-labeled lipids and a naphthalene-modified polymer. The permeability of the vesicles was characterized by calcein leakage experiments. The key findings were (i) the lack of coupling between the density of bound polymer and the rate of disruption and (ii) the qualitative difference depending on whether the polymer contains or not isopropyl side groups. Point i relates to the increase of the rate of polymer adsorption with increasing bulk polymer concentration, while the breakage is essentially unaffected. Point ii relates to the stabilization of large membrane fragments (Stokes radius ca. 40 nm) in the presence of a polymer with no isopropyl side groups, while micelle-like assemblies (Stokes radius 8 nm) containing the lipids are obtained with an isopropyl-containing polymer of similar hydrophobicity. Both polymers display similar efficiency at disrupting small vesicles. The mechanism of polymer-induced disruption appears to differ markedly from the disruption steps now recognized for conventional (molecular) surfactant and is discussed on the basis of data obtained with different membrane fluidity, polymer structure, concentration, and hydrophilicity.     

Aggregation phenomena on the ternary ionic-nonionic surfactant system: didodecyldimethylammonium bromide/octyl-beta-D-glucopyranoside/water. Mixed microaggregates, vesicles, and micelles

The formation of a variety of mixed colloidal aggregates has been investigated on a ternary ionic-nonionic system constituted by (i) a double-chain cationic surfactant with a 12-carbon atom hydrophobic tail, didodecyldimethylammonium bromide (di-C(12)DMAB), (ii) a nonionic single-chain surfactant, octyl-beta-D-glucopyranoside (OBG), and (iii) water. The study has been carried out by means of conductivity, zeta-potential, transmission electron microscopy (TEM), and cryogenic transmission electron microscopy (cryo-TEM) experiments on the highly diluted, very diluted, and moderately diluted regions. The formation of mixed microaggregates, prior to the appearance of mixed vesicles, has been undoubtly confirmed by conductivity, TEM, and zeta-potential results. The concentrations at which these mixed colloidal aggregates form, i.e., the mixed critical microaggregate concentration (CAC), the mixed critical vesicle concentration (CVC), and the mixed critical micelle concentration (CMC), have been determined from conductivity data, while the zeta-potential experiments allow for the characterization of the aggregate/solution interface. The shape and size of the microaggregates and vesicles have been evaluated from TEM and cryo-TEM micrographs, respectively. All of the experimental evidence has been also analyzed in terms of the theoretical packing parameter, P.     

pH-dependent chiral vesicles from enantiomeric sodium 2,3-bis(decyloxy) succinate in aqueous solution

Enantiomeric, twin-tailed, twin-chiral, sodium (2R,3R)-(+)-bis(decyloxy)succinate and sodium (2S,3S)-(-)-bis(decyloxy)succinate have been synthesized and characterized. Surface tension, conductivity, and steady-state fluorescence spectroscopic measurements confirmed the presence of two aggregation concentrations, namely, the critical micellar concentration (CMC) and the critical vesicle concentration (CVC). The compounds behaved as true surfactants, with a CMC of 0.05 mM, and formed vesicles spontaneously in aqueous solution at a CVC of 0.14 mM. The compounds formed myelin figures in contact experiments, suggesting the formation of bilayers in aqueous solution culminating into individual vesicles. The vesicles were of 500-800 nm size and formed egg shells, porous spheres, and multivesicular vesicles, confirmed from transmission electron microscopy and optical microscopic techniques. The vesicles were found to be pH sensitive, were stable in the pH range 6-8, and formed the insoluble diacid at acidic pH due to protonation of the carboxylate head groups.     

From decanoate micelles to decanoic acid/dodecylbenzenesulfonate vesicles

Different aspects of mixtures of decanoic acid and sodium decanoate were investigated in aqueous solution up to a total concentration of 300 mM. Depending on the ratio of ionized to nonionized decanoic acid, micelles or vesicles form above the critical concentrations of micelle (cmc) or the critical concentration for vesicle formation (cvc). The micelles and the vesicles are always present together with nonmicellized or nonvesiculized decanoate. The latter was determined for different total concentrations. On the basis of titration curves, by application of the Gibbs phase rule, and on the basis of differential scanning calorimetry measurements and an electron microscopy analysis, the pH region within which vesicles exist was identified (pH 6.8-7.8). At pH 7.0, the concentration of nonvesiculized decanoate is approximately 20 mM. Decanoic acid/decanoate vesicles can be sized down by the extrusion technique to form stable and mainly unilamellar vesicles with a mean diameter of less than 100 nm. By coaddition of an equimolar amount of sodium dodecylbenzenesulfonate (SDBS) to decanoic acid, vesicles also formed below pH 6.8. These mixed vesicles were investigated as potential templates for the peroxidase-catalyzed polymerization of aniline at pH 4.3. Furthermore, decanaote micelles (at pH 11.0) were applied as reaction modifiers for the simultaneous competitive alkaline hydrolysis of p-nitrophenylacetate and fluorescein diacetate. While the rate of hydrolysis of fluorescein diacetate is slowed considerably in the presence of the micelles in comparison with the micelle-free system, the rate of hydrolysis of p-nitrophenylacetate remains almost unaffected.     

Investigations into the bending constant and edge energy of bilayers of salt-free catanionic vesicles

Using molecular dynamics simulation, we performed theoretical calculations on the curvature constant and edge energy of bilayers of salt-free, zero-charged, cationic and anionic (catanionic) surfactant vesicles composed of alkylammonium cations (C(m)(+)) and fatty acid anions (C(n)(-)). Both the minimum size and edge energy of vesicles were calculated to examine the relation between the length of the surfactant molecules and the mechanical properties of the catanionic bilayers. Our simulation results clearly demonstrate that, when the chain lengths of the cationic and anionic surfactants are equal, both the edge energy and the rigidity of the catanionic bilayers increase dramatically, changing from around 0.36 to 2.77 kBT·nm(-1) and around 0.86 to 6.51 kBT·nm(-1), respectively. For the smallest catanionic vesicles, the curvature is not uniform and the surfactant molecules adopt a multicurvature arrangement in the vesicle bilayers. We suspect that the multicurvature bending of bilayers of catanionic vesicles is a common phenomenon in rigid bilayer systems, which could aid understanding of ion transport through bilayer membranes.     

双月桂酸三乙醇胺酯水溶液的囊泡性质研究

研究了具有非离子和阳离子双重特性的表面活性剂──双（月桂酸）三乙醇胺酯在稀盐酸溶液中未成囊泡的性质．发现只有当溶液pH值小于4．2时，囊泡才能形成，而在溶液pH值2~3范围内，囊泡稳定性和“耐盐”能力最佳．这些特性被归之于此化合物酸性水解作用的结果．     

Evidence for vesicle formation from 1:1 nonionic surfactant span 60 and fatty alcohol mixtures in aqueous ethanol: potential delivery vehicle composition

A study of the self-organization of nonionic surfactant span 60 (sorbitan mono stearate) in presence of fatty alcohol (stearyl, cetyl and lauryl) is presented. When ethanolic solution of the surfactant–fatty alcohol (1:1) mixture is added in water spontaneous large unilamellar vesicles (LUV) are formed which may potentially be useful vehicles for drug delivery purposes. Vesicular suspension has been characterized by transmission electron microscopy, dynamic light scattering, confocal laser scanning microscopy, dye entrapment and release studies. Surface tension measurement indicates the suitability of fatty alcohols towards spontaneous vesicle formation from span 60.     

Effect of shear on vesicle and lamellar phases of DDAB/lecithin ternary systems

The influence of shear flow on bilayer structures (vesicle and planar lamellar phases, L(α)), formed in DDAB/lecithin ternary systems, is studied by means of conventional rheology, Rheo NMR, and optical microscopy. The vesicles in the diluted (Lam(1)) phase are polydisperse multilamellae which turn into smaller monodisperse vesicles under shear. The concentrated (Lam(2)) phase is formed by non-oriented lamellae that do not surprisingly exhibit any pronounced shear-induced alignment prior to the transition into giant multilamellar vesicles. The biphasic region (Lam(1)+Lam(2)) shows a mosaic texture with a powder pattern indicating the prevalence of lamellae that transform into onions under shear.     

Shrink-wrap vesicles

We describe a simple approach to the controlled removal of molecules from the membrane of large unilamellar vesicles made of fatty acids. Such vesicles shrink dramatically upon mixing with micelles composed of a mixture of fatty acid and a phospholipid (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)), as fatty acid molecules leave the vesicle membrane and accumulate within the mixed micelles. Vesicle shrinkage was confirmed by dynamic light scattering, fluorescence recovery after photobleaching of labeled vesicles, and fluorescence resonance energy transfer between lipid dyes incorporated into the vesicle membrane. Most of the encapsulated impermeable solute is retained during shrinkage, becoming concentrated by a factor of at least 50-fold in the final small vesicles. This unprecedented combination of vesicle shrinkage with retention of contents allows for the preparation of small vesicles containing high solute concentrations, and may find applications in liposomal drug delivery.