Approach to method development and validation in capillary electrophoresis for enantiomeric purity testing of active basic pharmaceutical ingredients

A chiral capillary electrophoresis system allowing the determination of the enantiomeric purity of an investigational new drug was developed using a generic method development approach for basic analytes. The method was optimized in terms of type and concentration of both cyclodextrin (CD) and electrolyte, buffer pH, temperature, voltage, and rinsing procedure. Optimal chiral separation of the analyte was obtained using an electrolyte with 2.5% carboxymethyl-beta-CD in 25 mM NaH2PO4 (pH 4.0). Interchanging the inlet and outlet vials after each run improved the method's precision. To assure the method's suitability for the control of enantiomeric impurities in pharmaceutical quality control, its specificity, linearity, precision, accuracy, and robustness were validated according to the requirements of the International Conference on Harmonization. The usefulness of our generic method development approach for the validation of robustness was demonstrated.     

Chiral separation of synthetic vicinal diol compounds by capillary zone electrophoresis with borate buffer and beta-cyclodextrin as buffer additive.

The investigation on capillary electrophoretic enantioseparation of six synthetic compounds containing vicinal diol groups has been undertaken to acquire the optimum conditions using native beta-cyclodextrin (beta-CD) as chiral selector and borate as a background electrolyte. The separation was carried out in an uncoated capillary (58.5 cm x 75 microm i.d., effective length 48.5 cm) and the effects of several important factors were investigated in detail. The results showed that beta-CD as a chiral selector exhibited good enantioselectivity and that the enantioseparation was greatly influenced by the structure of the diols, the borate concentration and the buffer pH. The optimum performance was obtained for the chiral vicinal diols under the conditions of 200 mM borate buffer of pH 9.8 containing 1.7% beta-CD at an applied voltage of 15 kV and a capillary temperature of 20 degrees C. Under the conditions, four diols were baseline separated with fast analysis time and the good theoretical plate numbers (above 10 x 10(4)) and favorable migration-time reproducibilities (RSDs below 3.0%) were obtained. The separation results were satisfactory.     

Electrophoretic separation of multiple chiral center analyte with a three cyclodextrins mixture

A capillary electrokinetic chromatography method (CEKC) was developed for complete stereoisomeric separation of a neutral, hydrophobic, multiple chiral center dihydropyridone analogue, a drug candidate proposed in type 2 diabetes treatment. A background electrolyte comprising three cyclodextrins was found to successfully separate the eight isomers. First an anionic cyclodextrin, the SBE-β-CD, was selected to allow the chiral separation of our neutral compound and partial resolutions of the eight isomers were obtained. Then, the effects of different parameters such as the nature and concentration of the other cyclodextrins added and pH of the buffer were examined. Finally, a triple CD-system consisted of 15 mM SBE-β-CD plus 15 mM γ-CD and 40 mM HP-γ-CD in a 50 mM borate background electrolyte at pH 10, was found to successfully separate the eight isomers. Last, the selectivity and limits of detection and quantification were evaluated for this optimized method.     

Synthesis and application of dehydroabietylisothiocyante as a new chiral derivatizing agent for the enantiomeric separation of chiral compounds by capillary electrophoretic

A new chiral derivatizing reagent, dehydroabietylisothiocyante (DHAIC), was synthesized and used for the enantiomeric separation of chiral compounds in capillary electrophoresis (CE). The synthetic route to obtain DHAIC is described. The separation conditions for the chiral separation of several chiral compounds, such as protein amino acids and chiral drug DOPA were optimized. Best results for the chiral separation of DHAIC derivatized amino acids and DOPA were obtained in a running buffer consisted of 50 mM borate (pH 9.5), 5 mM sodium dodecyl sulphate (SDS) and 20% acetonitrile for amino acids and 60 mM Na₂HPO₄ (pH 8.0), 17 mM SDS and 25% acetonitrile for DOPA. Under the conditions studied, chiral separation of five amino acids including Ser, Val, Ala, Thr, Cys and a chiral drug DOPA as their diastereomeric DHAIC derivatives has been achieved by micellar electrokinetic chromatography (MEKC).     

Enatiomeric analysis of simendan by CE with beta-CD as chiral selector compared with CMPA-HPLC

The chiral separation of simendan enantiomers using capillary electrophoresis was studied with beta-cyclodextrin (beta-CD) as chiral selector. The influences of the concentration and pH of borate buffer solution, beta-CD concentration and methanol content in the background electrolyte were investigated. These factors were compared with those in an HPLC with beta-CD as chiral mobile phase additive (CMPA-HPLC). The quantification properties of the developed CE method were examined. A baseline separation of simendan enantiomers was achieved in the background electrolyte of 20 mmol/L borate buffer (pH 11.0) containing 12 mmol/L beta-CD-methanol (50:50 in volume ratio). The CE method is comparable with CMPA-HPLC in chiral resolution, although the optimal pH in CE (11.0) is much higher than that (6.0) in CMPA-HPLC. This chiral CE method is applicable to the quantitative ananlysis and enantiomeric excess value determination of L-simendan.     

Separation of naturally occurring triterpenoidal saponins by capillary zone electrophoresis.

A high-performance capillary electrophoresis (HPCE) was successfully applied to the separation and quantitation of naturally occurring oleanene triterpenoidal saponins. The HPCE adapted to the separation of two pairs of disteriomeric saponins (1-2) or (3-4), obtained from Trifolium alexandrinum seeds, was based on capillary zone electrophoresis (CZE) in borate buffer with UV detection at 195 nm. An usual technique for isolation and group separation of saponins was developed as an appropriate purification step prior to determination of individual saponins by CZE. The separation parameters such as borate concentration, pH and applied voltage were varied in order to find the best compromise that complied with demands for high separation, short duration and sufficiently high detector response. The optimum running conditions were found to be 60 mM borate buffer, pH 10 and 12 kV. Under the alkaline borate electrolyte, no resolution was achieved for the saponins (1 and 3) or (2 and 4) in a single mixture, except when 20 mM beta-cyclodextrin was added to the running electrolyte. With the combined techniques of group separation, purification and CZE, a rapid and efficient method for the determination of naturally occurring diasteriomeric saponins is now available.     

Separation and Migration Behavior of Benzophenones in Capillary Zone Electrophoresis

The migration behavior and separation of eight benzophenones selected were investigated by capillary zone electrophoresis in the range of pH 7.5–11.5. The effect of buffer pH, the types of buffer electrolyte, and the concentration of phosphate‐borate buffer on the separation and selectivity of benzophenones selected were examined. Better separability can be obtained with phosphate‐borate buffer than with phosphate buffer or borate buffer at around pH 9.2. Baseline separation of eight benzophenones could be simultaneously and successfully achieved with an appropriate choice of buffer pH and the concentration of phosphate‐borate buffer in capillary zone electrophoresis. The migration order of benzophenones selected could be explained on the basis of the degree of ionization and molecular mass.     

Method development and validation for the separation and determination of omeprazole enantiomers in pharmaceutical preparations by capillary electrophoresis

A new capillary zone electrophoresis (CZE) method for the separation of omeprazole enantiomers has been developed. Methyl-β-cyclodextrin (methyl-β-CD) was chosen as the chiral selector, and several parameters, such as cyclodextrin structure and concentration, buffer concentration, pH, and capillary temperature were investigated in order to optimize separation and run times. Analysis times, shorter than 8 min were found using a background electrolyte solution consisting of 40 mM phosphate buffer adjusted to pH 2.2, 30 mM β-cyclodextrin and 5 mM sodium disulphide, hydrodynamic injection, and 15 kV separation voltage. Detection limits were evaluated on the basis of baseline noise and were established 0.31 mg/l for the omeprazole enantiomers. The proposed method was applied to five pharmaceutical preparations with recoveries between 84 and 104% of the labeled contents.     

Separation of reboxetine enantiomers by means of capillary electrophoresis

The novel antidepressant reboxetine, a selective norepinephrine reuptake inhibitor, is increasingly used in the treatment of different forms of major depression. Reboxetine is a chiral compound, and is marketed as a racemic mixture of (R,R)- and (S,S)-reboxetine; however, the pharmacokinetic and toxicological profiles of the two enantiomers are rather different. For this reason, a simple capillary electrophoretic method for the separation of reboxetine enantiomers has been developed. Sulfobutyl ether-beta-cyclodextrin was chosen as the chiral selector, and several parameters, such as cyclodextrin and buffer concentration, buffer pH and capillary temperature were investigated in order to obtain good separation and acceptable run times. Using an uncoated, fused-silica capillary (internal diameter 50 microm, total length 48.5 cm, effective length 40.0 cm) and a background electrolyte consisting of a pH 3.0, 100 mM phosphate buffer containing 1.25 mM cyclodextrin, reboxetine enantiomers were baseline separated (resolution > 4) with a voltage of 20 kV in less than 16 min. Since pure enantiomers of reboxetine were not available, they were obtained from the racemic powder by means of direct-phase, high-performance liquid chromatography and their identity confirmed by circular dichroism spectra.     

The unified equation for the evaluation of degenerated first-order reactions in dynamic electrophoresis

An analytical solution for the unified equation for degenerated (pseudo-) first-order reactions, e.g., enantiomerization processes, in dynamic CE is presented, and validated with a dataset of 31 250 elution profiles covering typical experimental parameters. The unified equation was applied to determine the enantiomerization barrier of the hypnotic glutarimide derivative thalidomide (Contergan(R)) by dynamic capillary electrokinetic chromatography (DEKC). The enantiomer separation of thalidomide was performed in an aqueous 50 mM sodium borate buffer at pH 9.3 in the presence of the chiral mobile phase additive carboxymethyl-beta-CD. Interconversion profiles featuring pronounced plateau formation were observed. Activation parameters DeltaH( not equal) and DeltaS( not equal) were obtained from temperature-dependent measurements between 20.0 and 37.5 degrees C in 2.5K steps. From the activation parameters the enantiomerization barrier of thalidomide at 37 degrees C under basic conditions were calculated to be DeltaG( not equal) = 93.2 kJ/mol. Comparison of the kinetic data with results obtained at pH 8.0 reveals the catalytic influence of the base on the enantiomerization barrier.     

Separation of 3'-azido-2',3'-dideoxythymidine pronucleotide diastereoisomers in biological samples by CZE with cyclodextrin addition

The possibility of using capillary electrophoresis as an alternative technique to HPLC for the separation of pronucleotide diastereoisomers of AZT was investigated. In the pH range 6.2-7.2 where the analytes are stable, a chiral additive, carboxymethyl-beta-CD, was found appropriate to enable the separation of the uncharged diastereoisomers. An experimental design strategy was used to study the influence of several parameters (CD and phosphate buffer concentration, methanol content of the electrolyte, injected volume, capillary length, electric field and separation temperature) on the separation and find suitable analytical conditions for monitoring the prodrugs in cell extracts. The diastereoisomers of the three tBuSATE phenylphosphotriester derivatives of AZT studied could be fully resolved within short analysis time (less than 10 min). Method validation results showed satisfactory results for linearity, accuracy and repeatability.     

Cyclodextrin-mediated micellar electrokinetic chromatography and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for the enantiomer separation of racemorphan in human urine.

Micellar electrokinetic chromatography (MEKC) was successfully and conveniently applied to the chiral separation with the addition of cyclodextrins (CDs) as chiral selector to the running buffer. Chiral separation depended on the type of CD; in particular, beta-CD was effective for the chiral separation of racemorphan. We investigated the optimal conditions of type and concentration of CD as chiral selector for the routine enantiomeric separation of racemorphan with good reproducibility. The effects of other parameters such as buffer pH and detection wavelength were also investigated to obtain the optimum conditions for the enantiomeric separation of racemorphan. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was used for confirmation of racemorphan. The optimal conditions for enantiomeric separation of the racemorphan were as follows: 50 mM borate buffer at pH 9.4 with 50 mM SDS, 10 mM beta-CD and 20% 1-propanol, 57 cm x 50 microns fused-silica capillary column, and UV detection at 192 nm. Based on the developed method, racemorphan in human urine was also separated and determined using solid-phase extraction and MEKC.     

Highly efficient separation of isomeric epoxy fatty acids by micellar electrokinetic chromatography

A capillary electrophoresis (CE) method has been developed for simple and direct separation of cis- and trans-12,13-epoxy-9(Z)-octadecenoic acid and 9,10-epoxy-12(Z)-octadecenoic acid isomers. Separation was performed in micellar electrokinetic capillary chromatography (MEKC) using a buffer consisting of 25 mM borate (pH 9.20), 10 mM sodium dodecyl sulfate (SDS) and 10% v/v acetonitrile. The key variables, concentrations of SDS and organic modifier, were optimized by the application of a factorial experimental design. The use of a low micellar concentration, just above critical micelle concentration (CMC), in a background electrolyte containing an organic modifier not only made it possible to dissolve and separate highly hydrophobic fatty acid isomers, but also resulted in improved separation efficiency and selectivity. Separation efficiency up to 4 x 10(5) theoretical plates/m was achieved under an optimized condition. Also investigated were the influence of temperature on separation and the effect of organic modifier concentration on the dynamic exchange of the analytes between micelles and the bulk of the buffer solution. Direct UV was applied for detection of the fatty acids.     

Development of a capillary electrophoresis method for the enantioselective estimation of primaquine in pharmaceutical formulations

A capillary electrophoresis (CE) method has been developed that allows the separation and estimation of primaquine enantiomers using hydroxypropyl-gamma-cyclodextrin (HP-gamma -CD) as a chiral selector. The influence of chemical and instrumental parameters on the separation, such as type and concentration of CD, buffer concentration, buffer pH, applied voltage, capillary temperature, and injection time, were investigated. Good separation of the racemic mixture of primaquine was achieved using a fused-silica capillary (52.5 cm effective length x 50 microm id) and a background electrolyte composed of tris-phosphate buffer solution (50 mM, pH 2.5) containing 15 mM HP-gamma-CD as a chiral selector. The recommended applied voltage, capillary temperature, and injection time were 15 kV, 25 degrees C, and 6 s, respectively. Within-day and interday reproducibility of peak area and migration time gave relative standard deviation values ranging from 1.05-3.30%. Good recoveries (range of 96.8-104.9%) were obtained from the determination of placebos that were spiked with 0.25-1.00 mg/L primaquine. The proposed CE method was successfully applied to the assay of primaquine diphosphate in pharmaceutical formulations (tablets).     

Separation and migration behavior of structurally related phenothiazines in cyclodextrin-modified capillary zone electrophoresis

The influences of buffer pH and the concentration of beta-cyclodextrins (beta-CDs) on the separation and migration behavior of 13 structurally related phenothiazines in CD-modified capillary zone electrophoresis (CD-CZE) using a phosphate background electrolyte at low pH were investigated. We focused on the separation of these phenothiazines, including the enantiomers of chiral analytes, with the use of beta-CD and hydroxypropyl-beta-CD (HP-beta-CD) as electrolyte modifiers or chiral selectors at concentrations less than 8 mM. The results indicate that the interactions of phenothiazines with beta-CDs are very strong and that effective separations of 13 analytes can be achieved with addition of 0.3 mM beta-CD or 0.5 mM HP-beta-CD in a phosphate buffer at pH 3.0. Binding constants of phenothiazines to beta-CDs were evaluated for a better understanding of the interactions of phenothiazines with beta-CDs.     

The use of a highly sulfated cyclodextrin for the simultaneous chiral separation of amphetamine-type stimulants by capillary electrophoresis

We investigated the simultaneous chiral separation of nine amphetamine type stimulants (dl-norephedrine, dl-norpseudoephedrine, dl-ephedrine, dl-pseudoephedrine, dl-amphetamine, dl-methamphetamine, dl-methylenedioxyamphetamine (MDA), dl-methylenedioxymethamphetamine (MDMA), and dl-methylenedioxyethylamphetamine (MDEA)) by capillary electrophoresis using highly sulfated gamma-cyclodextrin (SU(XIII)-gamma-CD) as a chiral selector. Three different approaches using SU(XIII)-gamma-CD with 50 mM phosphate background electrolyte were designed; (I) high CD concentration (10 mM SU(XIII)-gamma-CD) at neutral pH (pH 7.0) in the normal polarity mode, (II) low CD concentration (1.0 mM) at low pH (pH 2.6) in the normal polarity mode and (III) high CD concentration at low pH (pH 2.6) in the reversed-polarity mode. In mode (II), the effects of adding three neutral CDs (beta-CD, dimethyl-beta-CD and hydroxypropyl-beta-CD) were also investigated. The best separation was obtained after optimizing mode (III) as follows: run buffer of 10 mM SU(XIII)-gamma-CD with 50 mM phosphate background electrolyte at pH 2.6, applied voltage of -12 kV and capillary temperature of 15 degrees C.     

Highly reproducible capillary zone electrophoresis of humic acids in cyclodextrin- or oligosaccharide-modified background electrolytes

Capillary zone electrophoresis has been used for the characterization and separation of humic acids. It was found that addition of saccharides like alpha-, beta-, gamma-cyclodextrins, maltose, hydroxyethylcellulose or dextran sulfate in the background electrolyte (50 mM Na2 B4 O7, pH 9.6) yields better separation patterns and highly reproducible electropherograms. Electropherograms with higher numbers of peaks and high reproducibility were obtained with alpha- and beta-cyclodextrins or with a mixture of alpha- + gamma-cyclodextrin-modified background electrolytes. Separation was carried out with the cathode at the detector end of the column. Adsorption of humic acids to the capillary wall was diminished using an epoxy-coated capillary tube.     

Method development and validation for the simultaneous determination of four coumarins in Saussurea superba by capillary zone electrophoresis

A capillary zone electrophoretic method has been developed for the determination of four coumarins--skimmin, scopolin, scopoletin, and umbelliferone-in Saussurea superba with UV detection at 254 nm. The capillary temperature was kept constant at 25 degrees C. Effects of buffer pH, electrolyte concentration, organic modifier, and applied voltage on migration behavior were studied systematically. The optimum conditions for separation were achieved by using 30 mM borate buffer at pH 9.02 containing 15% (v/v) methanol as the electrolyte and 25 kV as the applied voltage. For all analytes a good linear regression relationship (r > 0.999) was obtained between peak area and concentration over a relatively wide range. The method was validated for repeatability, precision, and accuracy. The validated method was successfully applied to the simultaneous determination of the four analytes in S. superba.     

Enantioseparation of cetirizine by sulfated-beta-cyclodextrin-mediated capillary electrophoresis

A sulfated beta-cyclodextrin (sulfated beta-CD)-mediated capillary electrophoresis method is described for the enantioseparation of cetirizine using achiral cefazolin as an internal standard. The enantioseparation of the drug was performed in a borate buffer (5 mM, pH 8.7) with 1% sulfated beta-CD (w/v) as chiral selector at 10 kV. Several parameters affecting the separation were studied, including the pH and the concentration of borate buffer and chiral selector. Under optimized conditions, a baseline separation of two enantiomers was achieved in less than 7 min. Using cefazolin as an internal standard (IS), the linear range of the method for the determination of levocetirizine was over 1.0 to 50.0 microg/mL; the detection limit (signal-to-noise ratio = 3) of levocetirizine was 0.5 microg/mL. The method allowed the enantioseparation of cetirizine in bulk samples and enantiomeric purity evaluation of levocetirizine (R-enantiomer) in pharmaceutical tablets (Xyzal), and it was also found to be suitable for enantioseparation in human plasma.     

Determination of histamine and histidine by capillary zone electrophoresis with pre-column naphthalene-2,3-dicarboxaldehyde derivatization and fluorescence detection

A rapid and sensitive method was developed for the simultaneous determination of histamine and histidine by capillary zone electrophoresis with lamp-induced fluorescence detection. A fluoregenic derivatization reagent, naphthalene-2,3-dicarboxaldehyde (NDA) was successfully applied to label the histamine and histidine respectively. The derivatization conditions and separation parameters including pH and concentration of electrolyte and sample injection were optimized in detail. The optimal derivatization reaction was performed with 1.0 mM NDA, 20 mM NaCN, and 20 mM borate buffer, pH 9.1 for 15 min. The separation of NDA-tagged histamine and histidine could be achieved in less than 200 s with 40 mM phosphate buffer (pH 5.8) as the running buffer. The detection limits for histamine and histidine were 5.5 x 10(-9) and 3.8 x 10(-9) M, respectively (S/N = 3). The relative standard derivations for migration time and peak height of derivatives were less than 1.5 and 5.0%, respectively. The method was successfully applied to the analysis of histamine and histidine in the P815 mastocytoma cells and the beer samples.