Determination of aniline by adsorptive stripping voltammetry using an improved diazotization and coupling procedure application to the evaluation of the light degradation of D&C red no. 33 in the presence of ascorbic acid

A method for the determination of aniline was developed, based on the diazotization and coupling of the aromatic amine to form an azo compound capable of being determined by adsorptive stripping voltammetry. A fast derivatization procedure was developed using 1-naftol as the coupling agent. A detection limit of 0.8 mug/l was obtained for aniline, using an accumulation time of 2 min. The method was applied in the determination of the amount of aniline in the colouring matter D&C Red No. 33, after a liquid-liquid extraction with chloroform, before and after submitting the colouring matter to a process of degradation, using accelerated light conditions in the presence of ascorbic acid.     

Identification of alkyl carbazoles and alkyl benzocarbazoles in Brazilian petroleum derivatives

The present work describes (a) the identification and characterization of an impurity, 2,4,5,7-tetrabromo-6-hydroxy-9-(2,3,4,5-tetrachlorophenyl)-3H-xanthen-3-one (BCPX), in the color additives D&C Red Nos. 27 and 28 (phloxine B) and (b) the determination of the extent and level of BCPX contamination in certified lots of these colors. For these purposes, BCPX (a compound not previously reported in the literature) was synthetically prepared. Test portions from 42 certified lots of D&C Red Nos. 27, 28 and 27 lakes were analyzed for BCPX using an HPLC method that included gradient elution and UV-vis photodiode array detection. Those lots were submitted for certification by both domestic (six) and foreign (six) manufacturers during the past 4 years. Of the test portions analyzed, 32 (76.2%) contained BCPX in amounts ranging from 0.01 to 3.21%. The remaining 10 test portions (23.8%) contained no detectable BCPX or less than 0.008%, which is the limit of quantification for the present method. The analyses revealed substantial differences in the level of BCPX across different manufacturers. The wide range of BCPX levels found in the analyzed lots suggests that the presence of BCPX in D&C Red Nos. 27 and 28 may be avoided or significantly reduced during the manufacturing process.     

Ultra-performance liquid chromatographic determination of manufacturing intermediates and subsidiary colors in D&C Red No. 34 and its lakes

An ultra-performance liquid chromatography (UPLC) method was developed to determine the manufacturing intermediates and subsidiary colors in the monosulfo monoazo color additive D&C Red No. 34 and its lakes. This method is currently used for batch certification of the color additives by the U.S. Food and Drug Administration to ensure that each lot meets published specifications for coloring drugs and cosmetics. The new UPLC method has replaced an HPLC method for determining the intermediates and a TLC method for determining the subsidiary colors. The intermediates are 2-amino-1-naphthalenesulfonic acid (Tobias acid) and 3-hydroxy-2-naphthalenecarboxylic acid (3-hydroxy-2-naphthoic acid). Subsidiary colors are positional isomers of the major dye component or related compounds containing lower numbers of substituent groups. The analytes are identified by comparison of their UPLC retention times and UV or visible absorption spectra with those of standards. Validation studies showed that peak area calibrations for the analytes were generally linear (R > 0.999), and recoveries were 98-103%. The LODs were 0.002-0.02%, and the RSDs at the specification levels were 0.7-2.2%. Survey analyses of 12 samples of certified D&C Red No. 34 straight colors and lakes from six domestic and foreign manufacturers yielded results for the intermediates by UPLC and HPLC that were consistent within experimental error. The UPLC analyses yielded results for the subsidiary colors that were consistently lower than results previously obtained by TLC, which we attribute to limitations of the TLC method. The new UPLC method provides sharper peaks, better peak separation, and faster analysis times than the formerly used HPLC method and is more accurate, much faster, and much less labor-intensive than the formerly used TLC method.     

Isolation, characterization and determination of trace organic impurities in FD&C red no. 40

The unsulfonated aromatic amine 4-nitro-p-cresidine (2-methoxy-5-methyl-4-nitrobenzenamine) was identified as an impurity in the regulated color additive FD&C Red. No. 40. The compound was isolated from the water-soluble color by extraction with chloroform, followed by transfer of the free amines to acid solution and subsequent separation by reversed-phase high-performance liquid chromatography. The 4-nitro-p-cresidine was collected and then identified by gas chromatography-mass spectrometry. The levels of 4-nitro-p-cresidine as well as p-cresidine and aniline were determined in commercial batches of FD&C Red. No. 40.     

Identification of 2-bromo-3,4,5,6-tetrachloroaniline and its quantification in the color additives D&C Red Nos. 27 and 28 (phloxine B) using solid-phase microextraction and gas chromatography-mass spectrometry

The present work describes (a) the identification and characterization of a contaminant, 2-bromo-3,4,5,6-tetrachloroaniline (2BTCA), in the color additives D&C Red Nos. 27 and 28 (phloxine B) and (b) the determination of the extent and level of 2BTCA contamination in certified lots of these colors. For these purposes, 2BTCA (a compound not previously reported in the literature) and its positional isomer 4-bromo-2,3,5,6-tetrachloroaniline (4BTCA) were synthetically prepared. 4BTCA was used as the internal standard for the quantification of 2BTCA in the colors. Test portions from 35 certified lots of D&C Red Nos. 27 and 28 were analyzed for 2BTCA using a solid-phase microextraction-GC-MS method. Those lots were submitted for certification by both domestic (seven) and foreign (four) manufacturers during the past 4 years. Of the test portions analyzed, 22 (62.9%) contained 2BTCA in amounts ranging from 0.15 to 435.7 ppm with an average value of approximately 131.7 ppm. The remaining 13 (37.1%) test portions contained no detectable 2BTCA or less than 0.01 ppm, which is the limit of quantification of the present method. The analyses revealed substantial differences in the level of 2BTCA across lots from the same manufacturer as well as among different manufacturers. The wide range of 2BTCA levels found in the analyzed lots suggests that the presence of 2BTCA in D&C Red Nos. 27 and 28 may be avoided or significantly reduced during the manufacturing process. A direct correlation was observed between the presence of 2BTCA and that of 3,4,5,6-tetrachlorophthalic acid in analyzed batches of D&C Red Nos. 27 and 28. A chemical pathway that could explain the presence of 2BTCA in these color additives, and ways to avoid its formation, are also proposed.     

高效液相色谱法同时测定化妆品中的9种水溶性着色剂

建立了用高效液相色谱-二极管阵列检测器(HPLC-DAD)同时检测化妆品中9种水溶性着色剂（溶剂绿7、食品黄3、食品红17、酸性黄1、酸性红33、食品红4、食品红1、橙黄I、酸性橙7）的检测方法。不同种类的化妆品采用不同的样品前处理方法提取后,用Diamonsil C18色谱柱分离,以乙腈-磷酸二氢钾缓冲溶液(pH 6)为流动相进行梯度洗脱,检测波长为240 nm,15 min内可对9种目标物同时进行检测,且各化合物都达到基线分离。经测定,该方法的平均回收率(n = 9)为85.33%～100.2%,相对标准偏差(RSD)为3.68%～8.20%,检出限为0.01～0.1 mg/L。方法简单、快速,能有效地提取、分离和测定化妆品中9种水溶性着色剂。将该方法用于实际化妆品的检测,结果令人满意。     

液相色谱串联质谱法测定猪肉和猪肝中9种磺胺类药物的残留

建立了高效液相色谱-串联质谱法(HPLC/MS/MS)同时测定猪肉及猪肝中9种磺胺类药物残留的检测方法.样品经10％的Na2SO4溶液和乙腈-氯仿(10:1)提取,乙腈饱和正己烷去脂,使用乙二胺-N-丙基硅烷(PSA)和十八烷基键合相硅胶(ODS C18-N)两种基质分散净化剂净化,采用LC-MS/MS多反应监测(MRM)正离子模式测定,内标法定量.9种磺胺检出限为0.1 ～0.8 μg/kg,在5,10,20μg/kg 3个浓度添加水平,回收率为74.1％ ～ 115.8％,相对标准偏差均小于6.2％(n=6).     

Analysis of lamotrigine and lamotrigine 2-N-glucuronide in guinea pig blood and urine by reserved-phase ion-pairing liquid chromatography.

Lamotrigine is an investigational anticonsulvant drug undergoing clinical trials. A simultaneous assay was developed to quantitate lamotrigine and its major metabolite, lamotrigine 2-N-glucuronide, from guinea pig whole blood. The extraction procedure and reversed-phase high-performance liquid chromatographic (HPLC) assay employed sodium dodecylsulfate (SDS) as an ion-pairing reagent to selectively separate lamotrigine and lamotrigine 2-N-glucuronide from endogenous blood components, other anti-convulsant drugs, and their metabolites. The mobile phase was composed of acetonitrile-50 mM phosphoric acid (pH 2.2) containing 10 mM SDS (33:67, v/v), and components were detected at 277 nm. The total coefficients of variance (C.V.) for the blood assay were less than or equal to 9.4% for lamotrigine (0.25-20.0 micrograms/ml) and less than or equal to 13.4% for the glucuronide metabolite (0.25-10.0 micrograms/ml). Separate assays for lamotrigine and its glucuronide in urine were developed. In order to quantitate low levels of lamotrigine in guinea pig urine, lamotrigine was extracted with tert.-butyl methyl ether-ethyl acetate (1:1). The total C.V. for lamotrigine quantitation in urine was less than or equal to 7.5% (0.10-10.0 micrograms/ml). For the determination of lamotrigine 2-N-glucuronide, urine was diluted with an SDS-phosphoric acid buffer (1:4) and injected directly onto the HPLC system, total C.V. less than or equal to 4.2% (0.5-50 micrograms/ml).     

Direct method for determination of Sudan I in FD&C Yellow No. 6 and D&C Orange No. 4 by reversed-phase liquid chromatography

A reversed-phase liquid chromatographic method was developed to determine parts-per-million and higher levels of Sudan 1, 1-(phenylazo)-2-naphthalenol, in the disulfo monoazo color additive FD&C Yellow No. 6 and in a related monosulfo monoazo color additive, D&C Orange No. 4. Sudan I, the corresponding unsulfonated monoazo dye, is a known impurity in these color additives. The color additives are dissolved in water and methanol, and the filtered solutions are directly chromatographed, without extraction or concentration, by using gradient elution at 0.25 mL/min. Calibrations from peak areas at 485 nm were linear. At a 99% confidence level, the limits of determination were 0.008 microg Sudan I/mL (0.4 ppm) in FD&C Yellow No. 6 and 0.011 microg Sudan I/mL (0.00011%) in D&C Orange No. 4. The confidence intervals were 0.202 +/- 0.002 microg Sudan I/mL (10.1 +/- 0.1 ppm) near the specification level for Sudan I in FD&C Yellow No. 6 and 20.0 +/- 0.2 microg Sudan I/mL (0.200 +/- 0.002%) near the highest concentration of Sudan I found in D&C Orange No. 4. A survey was conducted to determine Sudan I in 28 samples of FD&C Yellow No. 6 from 17 international manufacturers over 3 years, and in a pharmacology-tested sample. These samples were found to contain undetected levels (16 samples), 0.5-9.7 ppm Sudan I (0.01-0.194 microg Sudan I/mL in analyzed solutions; 11 samples including the pharmacology sample), and > or =10 ppm Sudan I (> or = 0.2 microg Sudan I/mL; 2 samples). Analyses of 21 samples of D&C Orange No. 4 from 8 international manufacturers over 4 years found Sudan I at undetected levels (8 samples), 0.0005 to < 0.005% Sudan I (0.05 to < 0.5 microg Sudan I/mL in analyzed solutions; 3 samples, including a pharmacology batch), 0.005 to <0.05% Sudan I (0.5 to <5 microg Sudan I/mL; 9 samples), and 0.18% Sudan I (18 microg Sudan I/mL; 1 sample).     

Performance comparison of three types of high-speed counter-current chromatographs for the separation of components of hydrophilic and hydrophobic color additives

The performance of three types of high-speed counter-current chromatography (HSCCC) instruments was assessed for their use in separating components in hydrophilic and hydrophobic dye mixtures. The HSCCC instruments compared were: (i) a J-type coil planet centrifuge (CPC) system with a conventional multilayer-coil column, (ii) a J-type CPC system with a spiral-tube assembly-coil column, and (iii) a cross-axis CPC system with a multilayer-coil column. The hydrophilic dye mixture consisted of a sample of FD&C Blue No. 2 that contained mainly two isomeric components, 5,5'- and 5,7'-disulfonated indigo, in the ratio of ～7:1. The hydrophobic dye mixture consisted of a sample of D&C Red No. 17 (mainly Sudan III) and Sudan II in the ratio of ～4:1. The two-phase solvent systems used for these separations were 1-butanol/1.3M HCl and hexane/acetonitrile. Each of the three instruments was used in two experiments for the hydrophilic dye mixture and two for the hydrophobic dye mixture, for a total of 12 experiments. In one set of experiments, the lower phase was used as the mobile phase, and in the second set of experiments, the upper phase was used as the mobile phase. The results suggest that: (a) use of a J-type instrument with either a multilayer-coil column or a spiral-tube assembly column, applying the lower phase as the mobile phase, is preferable for separating the hydrophilic components of FD&C Blue No. 2; and (b) use of a J-type instrument with multilayer-coil column, while applying either the upper phase or the lower phase as the mobile phase, is preferable for separating the hydrophobic dye mixture of D&C Red No. 17 and Sudan II.     

Separation and quantitation of components in FD&C Red No. 3 using capillary electrophoresis

The use of capillary electrophoresis as a technique to separate and quantitate components of FD&C Red No. 3 (erythrosine, color index No. 45430) is described. The fluorescein isomers, 2',4',5'-triiodofluorescein (2,4,5-I3F) and 2',4',7'-triiodofluorescein (2,4,7-I3F), the most abundant by-products formed during the preparation of the dye, were selected for quantitation studies. The separation of other lower halogenated impurities was also demonstrated. Electrophoretic mobility of the compounds was achieved in a 50 mM borate, 25 mM sodium dodecyl sulfate buffer at pH 9.3. The limits of quantitation were found to be 0.15% (w/w) (2,4,5-I3F) and 0.14% (w/w) (2,4,7-I3F) (relative to the mass of FD&C Red No. 3). The method is linear from 0.08 to 20.0% (w/w) for 2,4,5-I3F and between 0.06 and 17.0% (w/w) for 2,4,7-13F. In addition, relative standard deviations of 2.03 and 5.11% were determined from precision studies in the repeat analysis of FD&C Red No. 3 for 2,4,5-I3F and 2,4,7-I3F, respectively. Overall, the CE method produced data in excellent agreement with the reference HPLC method, used considerably less solvent and sample, generated less waste and was found to be considerably more cost efficient.     

Rapid quantification of hexachlorobenzene in the color additives D&C Red Nos. 27 and 28 (phloxine B) using solid-phase microextraction and gas chromatography-mass spectrometry

The present paper describes the development of a method for the quantification of hexachlorobenzene (HCB) in the color additives D&C Red Nos. 27 and 28 (phloxine B) using solid-phase microextraction followed by gas chromatography-mass spectrometry (GC-MS) analysis. The method is simple and fast (1 h for each analysis), generates little solvent waste, and does not involve a solid matrix, thus permitting a more efficient extraction than does a previously developed Soxhlet extraction-GC-MS method. Test portions from 30 batches of US-certified color additives D&C Red Nos. 27 and 28 were analyzed for HCB using the new method. Those batches represent domestic (five) and foreign (one) manufacturers that requested certification for the colors during the past four years. All the samples contained HCB, ranging from 0.2 ppm to 244.3 ppm. The analyses revealed significant differences in the levels of HCB across batches from the same manufacturer as well as among different manufacturers. The range of HCB levels found in the analyzed batches (0.2-244.3 ppm) suggest that the contamination with HCB may be decreased by avoiding use of starting material (tetrachlorophthalic anhydride) heavily contaminated with HCB.     

Spectrophotometric study of interaction of iodine with 4'-aminobenzo-15-crown-5 in chloroform, dichloromethane and 1,2-dichloroethane solutions

The formation of charge transfer complex between 4'-aminobenzo-15-crown-5 (AB15C5) and iodine is investigated spectrophotometrically in chloroform, dichloromethane (DCM) and 1,2-dichloroethane (DCE) solutions at 25 degrees C. The continuous variation method clearly revealed the formation of 1:1 charge transfer complex in solution. The observed time dependence of the charge transfer band and subsequent formation of I 3- in solution were related to the slow transformation of the initially formed 1:1 AB15C5.I2 outer complex to an inner electron donor-acceptor (EDA) complex, followed by fast reaction of the inner complex with iodine to form a triiodide ion. The pseudo-first-order rate constants for the transformation process were evaluated from the absorbance-time data and found to vary in the order of 1,2-DCE>DCM>CHCl3. The values of the formation constant, KDA, for each complex are evaluated from Benesi-Hilebrand equation. Stability of the resulting complex in three solvents was also found to vary in the order of 1,2-DCE>DCM>CHCl3.     

A clean and rapid liquid chromatographic technique for sulfamethazine monitoring in pork tissues without using organic solvents

A rapid method for the isolation and high-performance liquid chromatographic (HPLC) determination of sulfamethazine (SMZ) in pork tissues (kidney, liver, and muscle) without using organic solvents is developed. The isolation is performed by homogenization with an acid solution using an ultrasonic-homogenizer, followed by centrifugation. The HPLC analyses are performed using a reversed-phase C(4) column (150- x 4.6-mm i.d.), a mobile phase of 0.02 mol/L citric acid solution, and a photodiode array detector. The resulting HPLC chromatograms are free from interferences for determination and identification. The proposed technique is shown to be linear (r > 0.99) over the concentration range 0.1-2.0 microg/g for all pork tissues. Average recoveries of SMZ (spiked 0.1-2.0 microg/g) range from 87.6% to 90.2%, with inter- and intra-assay variabilities of less than 4%. The total time required for the analysis of one sample and limit of quantitation is less than 20 min and 0.09 microg/g, respectively.     

High-performance liquid chromatographic determination of zinc pyrithione in antidandruff preparations based on copper chelate formation

A simple and rapid method for the determination of zinc pyrithione (ZPT) in antidandruff preparations by high-performance liquid chromatography (HPLC) has been developed. ZPT in samples was converted into a stable copper(II) complex by mixing with cupric sulphate solution followed by extraction with chloroform. HPLC was carried out on a Nucleosil 5 C18 column (15 cm X 4.6 mm I.D.) using methanol-water (3:2) as the mobile phase with UV detection at 320 nm. The calibration graph was linear from 0.1-0.5 micrograms for ZPT. The recoveries from four shampoos were 98.0-100.6% with high accuracy.     

Thermal and volumetric properties of chloroform+benzene mixtures and the ideal associated solution model of complex formation

In the ideal associated solution model, activity coefficients of all species (labelled A, B, and AB here) at equilibrium are taken to be unity at all compositions and temperatures. We have applied this model to an analysis of thermodynamic properties (vapor pressures, excess enthalpies, partial molar enthalpies of solution, excess heat capacities, and excess volumes) of the chloroform+benzene system in terms of K, H, C _p , and V for the equilibrium represented by A+B=AB. It is demonstrated that there is reasonably good consistency between this simple model and all of the thermodynamic data, which shows that the model is realistic enough to be useful in assessing the properties of the not-very-stable AB complex in the chloroform+benzene system. New thermal (partial molar enthalpies of solution and excess heat capacities) and volumetric properties of the chloroform+benzene system have been measured, with results presented here.     

高脂肪食品中合成着色剂的检测

建立了高脂肪食品中合成着色剂的高效液相色谱检测方法。在碱性溶液中用正己烷萃取食品中的脂肪,分层后移除脂肪层,从剩余溶液中提取的柠檬黄、苋菜红、靛蓝、胭脂红、日落黄、诱惑红、亮蓝七种水溶性合成着色剂经高效液相色谱分离后,用二极管阵列检测器(DAD)检测,与标准溶液的保留时间、吸收光谱的特征及峰面积比较进行定性、定量;在优化的萃取pH值与色谱分析条件下,平均回收率在92.8%~102.1%之间,检出限为0.1 mg/kg。该法前处理简单,回收率高,操作简便,测定结果令人满意。     

High-performance liquid chromatographic determination of uranium using solvent extraction and bis(salicylaldehyde) tetramethylethylenediimine as complexing reagent

The reagent bis(salicylaldehyde)tetramethylethylenediimine has been used for the determination of dioxouranium(VI), based on complexation in aqueous solution at pH 6, followed by extraction in chloroform and HPLC determination on a Hypersil ODS (3 μm) column. The complex was eluted with the ternary mixture methanol-acetonitrile-water (40:30:30, v/v/v), with UV detection at 260 nm. Oxovanadium(IV), iron(III), copper(II), cobalt(II), nickel(II) and palladium(II) were completely separated and did not interfere in the determination of uranium. The linear calibration range and detection limits have been obtained. The method has been applied to the determination of uranium together with copper, iron and nickel in mineral ore samples.     

Dimerization and double proton transfer-induced tautomerism of 4(3H)-pyrimidinone in solution studied by IR spectroscopy and quantum chemical calculations

The tautomerism and dimerization of 4(3H)-pyrimidinone (4(3H)Pyr) in carbon tetrachloride (CCl4) and chloroform (CHCl3) solutions were investigated using IR spectroscopy and quantum chemical calculations. The observed IR spectra in the NH and OH stretching regions clearly revealed the predominance of the keto tautomer in both solvent systems. The enol form only exists in a very small proportion in the CCl4 solution. The tautomeric constant for the two monomers KT[OH/NH] = 0.012 and DeltaE = 2.62 kcal/mol were estimated at 25 degrees C. This result was supported by the self-consistent reaction field/polarizable continuum (SCRF/PCM) calculation at the MP4(full, SDQ)/aug-cc-pVDZ level, which predicted DeltaE = 3.06 kcal/mol in CCl4. In the C=O stretching region, two bands were observed, suggesting the coexistence of two keto structures at equilibrium. The calculated IR spectra indicated that the bands at 1711 and 1675 cm(-1) arise from the keto monomer and keto-keto (KK) ring dimer, respectively. At elevated temperature, the populations of both the keto and enol monomers increased for the CCl4 solution. The present study revealed that the keto <--> enol tautomerization does not occur in the isolated monomer molecule. The double proton transfer (DPT) reaction in the KK ring dimer presumably plays a substantial role in the population increase of the enol monomer. To our knowledge, this may be the first observation of the tautomerization in a model base pair via the temperature-induced ground-state DPT reaction under a nonpolar liquid environment reported so far. This tautomerism can serve as a mimic circumstance for the spontaneous mutations induced by proton transfer in the DNA base pairs.     

Determination of unsulfonated aromatic amines in FD&C Yellow No. 6 by the diazotization and coupling procedure followed by reversed-phase high-performance liquid chromatography

Data are presented for the determination of parts-per-billion (10(9)) levels of aniline, benzidine, 4-aminobiphenyl (4-ABP) and 4-aminoazobenzene in the regulated color additive FD&C Yellow No. 6. The determination involves chloroform extraction of the amines from the color additive, followed by diazotization and coupling with the disodium salt of 3-hydroxy-2,7-naphthalenedisulfonic acid (R-salt). The coupling products are then analyzed by reversed-phase high-performance liquid chromatography. An interference discovered during the determination of 4-ABP required the use of 4,5-dihydro-5-oxo-1-(4-sulfophenyl)-1H-pyrazole-3-carboxylic acid (pyrazolone-T) as an alternative coupling agent. The identity of each coupling product is confirmed by obtaining a UV-visible spectrum of the eluting solute. The liquid chromatograph is calibrated in the presence of the color additive by using the external standard method.