A diamagnetic dititanium(III) paddlewheel complex with no direct metal-metal bond

Reaction of Ti[N(But)Ar]3 (Ar = 3,5-C6H3Me2 or Ar' = C6H5) with CO2 at -40 degrees C produces diamagmetic Ti(III) paddlewheel complexes with long Ti-Ti separations (>3.4 Angstrom), thus excluding direct Ti-Ti bonding. 1H NMR spectroscopy shows that the compounds are diamagnetic in solution in the temperature range of -65 to +70 degrees C. In the solid state, the diamagnetism was found to persist between 2 and 300 K. Calculations at the density functional theory level suggest that the diamagnetism results from antiferromagnetic coupling by superexchange through the ligand pi system.     

One-dimensionally extended paddlewheel dirhodium complexes from metal-metal bonds with diplatinum complexes

We have succeeded in obtaining unique one-dimensional (1D) chain complexes (1, 2, and 3) comprised of two types of metal species: rhodium and platinum. These compounds are constructed from a dinuclear rhodium complex (i.e., [Rh(2)]) and a pivalamidate-bridged platinum complex (i.e., [Pt(2)]), forming an attractive quasi-1D infinite chain, expressed as -{[Rh(2)]-[Pt(2)]-[Pt(2)]}(n)-. Interestingly, the bridging ligands of [Rh(2)] can be varied with trifluoroacetate, acetate, and acetamidate groups, indicating the possibility of electronic structure modulation in the 1D chain.     

Benzylic oxidation catalyzed by dirhodium(II,III) caprolactamate

[reaction: see text] Dirhodium caprolactamate [Rh2(cap)4] is an effective catalyst for benzylic oxidation with tert-butyl hydroperoxide (TBHP) under mild conditions. Sodium bicarbonate is the optimal base additive for substrate conversion. Benzylic carbonyl compounds are readily obtained, and a formal synthesis of palmarumycin CP2 using this methodology is described.     

Efficient aziridination of olefins catalyzed by mixed-valent dirhodium(II,III) caprolactamate

[reaction: see text] A mild, efficient, and selective aziridination of olefins catalyzed by dirhodium(II) caprolactamate [Rh(2)(cap)(4).2CH(3)CN] is described. Use of p-toluenesulfonamide (TsNH(2)), N-bromosuccinimide (NBS), and potassium carbonate readily affords aziridines in isolated yields of up to 95% under extremely mild conditions with as little as 0.01 mol % Rh(2)(cap)(4). Aziridine formation occurs through Rh(2)(5+)-catalyzed aminobromination and subsequent base-induced ring closure. An X-ray crystal structure of a Rh(2)(5+) halide complex, formed from the reaction between Rh(2)(cap)(4) and N-chlorosuccinimide, has been obtained.     

A hardwon dirhodium paddlewheel with guanidinate type (hpp) bridging ligands

We report a dirhodium paddlewheel compound which has an Rh2(5+) core enveloped by four guanidinate ligands and an axially coordinated bromine atom; Rh2(hpp)4Br crystallizes as a 1-D chain with a Rh-Rh distance of 2.430(3) è and a Rh-Rh bond order of 1.5 (hpp = the anion of 1,3,4,6,7,8-hexahydro-2H-pyrimido[1,2a]pyrimidine).     

A weak,short metal-metal bond in a chromium(II) amidinate complex

Treatment of chromium(II) chloride with 2 equiv of Li[tBuNC(CH3)NtBu], Li[iPrNC(CH3)NiPr], or Li[tBuNC(CH3)NEt] (prepared from the corresponding carbodiimides and methyllithium) afforded Cr[tBuNC(CH3)NtBu]2 (1, 50%), Cr[iPrNC(CH3)NiPr]2 (2, 54%), and [Cr(tBuNC(CH3)NEt)2]2 (3, 58%) as deep blue, purple, and amber or metallic green crystals, respectively. Cr[tBuNC(CH3)NtBu]2 and Cr[iPrNC(CH3)NiPr]2 possess monomeric structures in the solid state with tetrahedral and square planar geometries about the chromium centers, respectively. [Cr(tBuNC(CH3)NEt)2]2 exists as a dimer in the solid state, with two mu2-amidinate ligands, two eta2-amidinate ligands, and a chromium-chromium bond length of 1.9601(12) A. [Cr(tBuNC(CH3)NEt)2]2 is diamagnetic in the solid state, as determined by magnetic susceptibility measurement and CP/MAS 13C NMR spectroscopy. However, [Cr(tBuNC(CH3)NEt)2]2 dissociates into paramagnetic monomers in solution, as determined by observation of extremely broad peaks in the 1H NMR spectra in cyclohexane-d12 and benzene-d6, a solution magnetic moment measurement, and by solution molecular weight measurements in benzene. The combined results suggest that the chromium-chromium bond strength in [Cr(tBuNC(CH3)NEt)2]2 is weak and cannot exceed the difference in solvation energies between the dimer and two monomers, plus any increase in metal-nitrogen bond strengths in the monomers.     

Au2trien: a dinuclear gold(III) complex with unprecedented structura features

The X-ray structure of a dinuclear gold(III) complex, Au2trien, shows the presence of two square planar gold(III) centers bridged by a nitrogen donor, in a very unusual fashion.     

Mechanism and control of rare tautomer trapping at a metal-metal bond: adenine binding to dirhodium antitumor agents

The cause of mutations in the genome by the occurrence of nuclebases in their rare tautomeric forms was first proposed by Watson and Crick in 1953. Since this pioneering proposal, tremendous experimental and theoretical research efforts have aimed to elucidate the conditions under which nucleobase tautomerizations can occur. Previous work raised the interesting question as to whether adenine binding to the anticancer drug cisplatin can induce tautomerization of the nucleobase, but the results indicated such an event to be unlikely under physiological conditions. In this work, we have studied the reaction of three adenine (Ade) tautomers with metal-metal bonded dirhodium antitumor agents using high-level computations. The calculations reveal that the thermodynamically most stable compound in the reaction of Ade with dirhodium tetraformate in aqueous solution is a species in which a rare N6-imino tautomer spans the metal-metal bond via sites N7 and N6. However, comprehensive transition state predictions suggest that the multiple-step mechanisms leading to this bridging species are kinetically highly challenging. A number of strategies to chemically modify the metal-metal unit are considered, aiming to derive a rational plan for trapping the rare N6-imino tautomer, which is incapable of Watson-Crick pairing with canonical thymine.     

Synthesis and characterization of a dinuclear (Hedta)Ru(III) complex

A ruthenium(III) complex containing ethylenediaminetetraacetate (edta), [{Ru(Hedta)}₂(Pyz)]?·?8H₂O (1) (Pyz?=?pyrazine), has been synthesized by the reaction between K[Ru(Hedta)Cl]?·?1.5H₂O and pyrazine. The structure of the complex was determined by single X-ray diffraction. Complex 1 crystallizes in the triclinic space group P 1 with a?=?7.293(9)?Å, b?=?10.575(14)?Å, c?=?12.742(16)?Å, α?=?104.044(19)°, β?=?91.893(19)°, γ?=?93.35(2)°, Z?=?1. The product was also characterized by IR, UV-Vis, EPR spectrum and magnetic techniques.     

Comparing a mononuclear Zn(II) complex with hydrogen bond donors with a dinuclear Zn(II) complex for catalysing phosphate ester cleavage

Introducing ligand based hydrogen bond donors to increase the activity of a mononuclear Zn(II) complex for catalysing phosphate ester cleavage can be a more effective strategy than making the dinuclear analogue.     

Self-assembled monolayer of a peroxo-bridged dinuclear cobalt(III) complex on Au(111)

Densely packed Self-Assembled Monolayers (SAMs) of a peroxide-bridged dicobalt complex, [Co2(O2)(bpbp)(O2CCH2CH2S)]2+, 3, (bpbp- = 2,6-bis((N,N-bis-(2-picolyl)amino)-methyl)-4-tert-butylphenolato) have been prepared on atomically planar Au(111) surfaces. Surface voltammetric and interfacial capacitance data, along with electrochemical scanning tunnelling microscopy (in situ STM) imaging, support the formation of a densely packed adlayer of 3 attached via a gold-thiolate bond. In solution, the disulfide linked precursor for 3 reversibly binds dioxygen with high affinity. Electrochemical measurements show that the redox potential of the O22-/O2*- couple of the monolayer of 3 is cathodically shifted by nearly 500 mV compared to the precursor in solution. This is attributed to the close proximity of the O2 binding site to the gold surface. Since the redox potential of the O22-/O2*- couple reflects tentatively the binding affinity of O2 to the deoxygenated CoII2 binding site, the potential of the O22-/O2*- couple of the SAM of 3 suggests a much higher affinity towards O2 compared to the solution precursor.     

Crystal packing in a solvent-free or chloroform-solvated dinuclear platinum(III) organometallic complex

The synthesis and crystal structure determination of the dinuclear organometallic platinum(III) complex [Pt(2-phenylpyridine)(2-mercaptothiazoline)(Cl)]₂ and its solvate [Pt(2-phenylpyridine)(2-mercaptothiazoline)(Cl)]₂·3CHCl₃ have been performed. Both crystals present a layered structure in which the molecules of the complex are held together by weak intermolecular interactions. In the solvated crystal, the chloroform molecules are arranged in extended 2D planar layers between the molecular layers.     

Rapid C-H bond activation by a monocopper(III)-hydroxide complex

One-electron oxidation of the tetragonal Cu(II) complex [Bu(4)N][LCuOH] at -80 °C generated the reactive intermediate LCuOH, which was shown to be a Cu(III) complex on the basis of spectroscopy and theory (L = N,N'-bis(2,6-diisopropylphenyl)-2,6-pyridinedicarboxamide). The complex LCuOH reacts with dihydroanthracene to yield anthracene and the Cu(II) complex LCu(OH(2)). Kinetic studies showed that the reaction occurs via H-atom abstraction via a second-order rate law at high rates (cf. k = 1.1(1) M(-1) s(-1) at -80 °C, ΔH(?) = 5.4(2) kcal mol(-1), ΔS(?) = -30(2) eu) and with very large kinetic isotope effects (cf. k(H)/k(D) = 44 at -70 °C). The findings suggest that a Cu(III)-OH moiety is a viable reactant in oxidation catalysis.     

Facile allylic C-H bond activation on the bridging disulfide ligand in the Ru(III) dinuclear complex having a conjugated RuSSRu core

Treatment of [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)(mu-S(2))](CF(3)SO(3))(4) (1), which is prepared by the reaction of [[RuCl(P(OCH(3))(3))(2)](2)(mu-S(2))(mu-Cl)(2)] (2) with 4 equiv of AgCF(3)SO(3), with terminal alkenes such as 1-pentene, allyl ethyl ether, allyl phenyl ether, 1,4-hexadiene, and 3-methyl-1-butene, resulted in the formation of complexes carrying a C(3)S(2) five-membered ring, [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(2)CH(2)CR(1)R(2)S]](CF(3)SO(3))(4) (3, R(1) = CH(2)CH(3), R(2) = H, 40%; 4, R(1) = OCH(2)CH(3), R(2) = H, 60%; 5, R(1) = OC(6)H(5), R(2) = H, 73%; 6, R(1) = CH=CHCH(3), R(2) = H, 48%; 7, R(1) = R(2) = CH(3), 40%). Reaction of 1 with methylenecycloalkanes was found to give several different types of products, depending on the ring size of the substrates. A trace of [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-SCH(CH(2)CH(2))CH(CH(3))S]](CF(3)SO(3))(4) (9) having a C(2)S(2) four-membered ring to bridge the two Ru atoms was obtained by the reaction of 1 with methylenecyclobutane, whereas the reaction with methylenecyclohexane gave [[Ru(P(OCH(3))(3))(2)(CH(3)CN)(3)](2)[mu-S(CH(2)(C=CHCH(2)CH(2)CH(2)CH(2))S)](CF(3)SO(3))(3) (10) in 69% yield via C-S bond formation and elimination of a proton. Throughout these reactions with alkenes giving a variety of products, the activation of the allylic C-H bond is always the essential and initial key step.     

Route to metallacrowns: the mechanism of formation of a dinuclear iron(III)-salicylhydroxamate complex

The equilibria and the kinetics of the binding of Iron(III) to salicylhydroxamic (SHA) and benzohydroxamic (BHA) acids have been investigated in aqueous solution (I = 1 M (HClO(4)/NaClO(4)), T = 298 K) using spectrophotometric and stopped-flow methods. Whereas Iron(III) forms a 1:1 complex (ML) with BHA, it forms both ML and M(2)L complexes with SHA. The presence of M(2)L in aqueous medium is corroborated by FTIR measurements. The reactive form of Iron(III) is the hydrolyzed species FeOH(2+), which binds to the O,O site in ML and to the O,O and O(P),N (P = phenolate) sites in M(2)L, inducing full deprotonation of the latter. The reaction pathway is discussed in terms of a multistep mechanistic scheme in which the metal-ligand interaction is coupled to hydrolysis and self-aggregation steps of Iron(III). The observation and characterization of M(2)L as a stable species is important because it contains the -Fe-O-N-Fe- sequence, which constitutes the repetitive motif of the SHA-based metallacrown ring and provides the rationale for 12-MC-4 metallacrowns. In the framework of this study, the kinetics of the Iron(III) dimerization and trimerization have also been investigated using the stopped-flow method to perform dilution jumps. The reaction scheme put forward involves two parallel steps (FeOH(2+) + FeOH(2+) and Fe(3+) + FeOH(2+)) that lead to formation of the Fe(2)(OH)(2)(4+) dimer and a slower step (FeOH(2+) + Fe(2)(OH)(2)(4+)) to form the trimer species. The kinetics of the last step have been investigated here for the first time, and the results deduced indicate that, of the two possible trimer structures reported in the literature, Fe(3)(OH)(3)(6+) and Fe(3)(OH)(4)(5+), the latter prevails by far.     

Single-molecule magnet behaviour in a tetrathiafulvalene-based electroactive antiferromagnetically coupled dinuclear dysprosium(III) complex

The reactions between the [Ln(tta)(3)]·2H(2)O precursors (tta(-)=2-thenoyltrifluoroacetonate anion) and the tetrathiafulvalene-3-pyridine-N-oxide ligands (L(1)) lead to dinuclear complexes of formula [{Ln(tta)(3)(L(1))}(2)]·xCH(2)Cl(2) (x=0.5 for Ln=Dy(III) (1) and x=0 for Ln=Gd(III) (2)). The crystal structure reveals that two {Ln(tta)(3)} moieties are bridged by two donors through the nitroxide groups. The Dy(III) centre adopts a distorted square antiprismatic oxygenated polyhedron structure. The antiferromagnetic nature of the exchange interaction between the two Dy(III) ions has been determined by two methods: 1) an empirical method using the [Dy(hfac)(3)(L(2))(2)] mononuclear complex as a model (3) (hfac(-)=1,1,1,5,5,5-hexafluoroacetylacetonate anion, L(2)=tetrathiafulvaleneamido-2-pyridine-N-oxide ligand), and 2) assuming an Ising model for the Dy(III) ion giving an exchange energy of -2.30 cm(-1), g=19.2 in the temperature range of 2-10 K. The antiferromagnetic interactions have been confirmed by a quantitative determination of J for the isotropic Gd(III) derivative (J=-0.031 cm(-1), g=2.003). Compound 1 displays a slow magnetisation relaxation without applied external magnetic fields. Alternating current susceptibility shows a thermally activated behaviour with pre-exponential factors of 5.48(4)×10(-7) s and an energy barrier of 87(1) K. The application of an external field of 1.6 kOe compensates the antiferromagnetic interactions and opens a new quantum tunnelling path.     

Co(II)-Co(II) paddlewheel complex with a redox-active ligand derived from TTF

A new trimethyltetrathiafulvalene (Me3TTF) derivative Me3TTF-CH=CH-py bearing a pyridyl was synthesized and coordinated to a cobalt(II) benzoate dimer, having paddlewheel core structure, leading to a complex formulated as Co2(PhCOO)4(Me3TTF-CH=CH-py)2. Single-crystal X-ray diffraction studies of the complex performed at 293 and 100 K evidenced the existence of a weak metal-metal interaction. Magnetic studies revealed an antiferromagnetic behavior, which is explained as the result of the direct exchange between metal centers.