Hybrid Conjugated Organic Oligomers Consisting of Oligodiacetylene and Thiophene Units: Synthesis and Optical Properties

Novel and highly soluble hybrid conjugated organic oligomers consisting of oligodiacetylene and thiophene units have been synthesized in high purity through iterative and divergent approaches based on a sequence of Sonogashira reactions. The series of thiophene‐containing oligodiacetylenes (ThODAs) and homocoupled ThODAs (HThODAs) show—both in solution and in the solid state—a strong optical absorption, which is progressively red shifted with increasing chain length. The linear correlation of the absorption maximum (λ^A_max) with the inverse of conjugation length (CL=number of double and triple bonds) shows that the effective conjugation length of this system is extended up to at least CL=20. Furthermore, absorption measurements of dropcast thin films display not only a bathochromic shift of the absorption maxima but also a higher wavelength absorption, which is attributed to increased π–π interactions. The wavelength of the maximum fluorescence emission (λ^E_max) also increases with CL, and emission is maximal for oligomers with CL=7–12 (fluorescence quantum yield Φ_F=～0.2). Both longer and shorter oligomers display marginal emission. The calculated Stokes shifts of these planar materials are relatively large (0.4 eV) for all oligomers, and likely due to excitation to the S₂ state, thus suggesting that the presence of enyne moieties dominates the ordering of the lowest excited states. The fluorescence lifetimes (τ_F) are short (τ_F,_max=?1 ns) and closely follow the tendency obtained for the fluorescence quantum yield. The anisotropy lifetimes show a near‐linear increase with CL, in line with highly rigid oligomers.     

Electronic and optical properties of ladder-type heteraborins

Ladder-type pi-conjugated molecules bearing heteraborin (azaborine or thiaborin) units were synthesized, and X-ray crystallographic analysis of pentacene-type molecules showed that these molecules have rigid and planar structures. UV-visible spectroscopy and theoretical calculations revealed the enhancement of electronic interaction between heteraborin units, the decrease in HOMO-LUMO energy gaps, and the strong effect of the bridging main-group elements (nitrogen or sulfur) on the electronic states. The ladder-type molecules emitted strong fluorescence both in solution and in the solid state, and the emission-band shapes were different from each other, indicating the existence of intermolecular interactions in the solid state. Complex formation of the ladder molecules with fluoride ion was monitored by UV-visible spectroscopy, which revealed that the Lewis acidity of these molecules can be controlled by the elongation of pi systems and the change of the bridging main-group elements.     

Synthesis and optical properties of new inorganic phosphate matrices

We have developed the chemical conditions to prepare highly concentrated mixtures of different metallic chlorides (Sn, Al, Cr) and phosphoric acid. We let them dry at room temperature for bulk materials, but for films the temperature of drying can reach 400°C. The structure of bulk compounds have been examined through elastic neutron diffraction experiments correlated with X ray diffraction at large angle. These compounds are amorphous and we observed, using the differential scanning calorimetry at low temperature, that T _g values can be determined at more than 100 K below room temperature. This material could be considered as a liquid glass at room temperature. Several other metallic elements are under progress to determine if this behavior is depending on the nature of the element.Bulk materials have been codoped with a dye (oxazine) and trivalent erbium ion. By UV excitation of the dye we observed the absorption spectrum Er³⁺ in the emission band of oxazine, that is an evidence of the energy transfer effect.Films made by spin coating technique have been doped with Dispersed Red 1 (DR 1). We studied the effect of organic additives (hydrosolubles polymers like PVP) on the kinetics of photoisomerisation of DR 1.Films are also used as waveguide. Several modes have been observed and their refractive index values determined.     

Synthesis and optical properties of polyimides

Polyimides are important industrial materials because of their excellent properties. They are extensively used in the electronics industry and have great potential in the field of optical communications. In this article, we discuss the effect of the polyimide structure and the processing conditions on the optical properties. Both commercially available fluorinated polyimides and polyimides synthesized in our laboratory were used in this study. The relationship between the extent of fluorination and the refractive index was studied, and it was found that fluorination reduced the refractive index as expected. Studies conducted on the structure–property relationship revealed that with the use of more rigid monomers for the polyimides, the polyimides could be modified to show a large birefringence. The extent of birefringence depended on the composition of the polymer. In addition, the processing conditions directly controlled the residual stress in the polymer films. The residual stress was an important factor in inducing light scattering, which resulted in higher optical loss. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4832–4838, 2000     

Solubilization of single-walled carbon nanotubes by using polycyclic aromatic ammonium amphiphiles in water--strategy for the design of high-performance solubilizers

We describe the design of polycyclic aromatic compounds with high performance that dissolve single-walled carbon nanotubes (SWNTs). Synthetic amphiphiles trimethyl-(2-oxo-2-phenylethyl)-ammonium bromide (1) and trimethyl-(2-naphthalen-2-yl-2-oxo-ethyl)-ammonium bromide (2) carrying a phenyl or a naphtyl moiety were not able to dissolve/disperse SWNTs in water. By contrast, trimethyl-(2-oxo-2-phenanthren-9-yl-ethyl)-ammonium bromide (3) solubilized SWNTs, although the solubilization ability was lower than that of trimethyl-(2-oxo-2-pyrene-1-yl-ethyl)-ammonium bromide (4) (solubilization behavior observed by using 4 was described briefly in reference 4a). Transmission electron microscopy (TEM), as well as visible/near-IR, fluorescence, and near-IR photoluminescence spectroscopies were employed to reveal the solubilization properties of 4 in water, and to compare these results with those obtained by using sodium dodecyl sulfate (SDS) and hexadecyltrimethylammonium bromide (HTAB) as solubilizers. Compound 4 solubilized both the as-produced SWNTs (raw-SWNTs) and purified SWNTs under mild experimental conditions, and the solubilization ability was better than that of SDS and HTAB. Near-IR photoluminescence measurements revealed that the chiral indices of the SWNTs dissolved in an aqueous solution of 4 were quite different from those obtained by using micelles of SDS and HTAB; for a SWNTs/4 solution, the intensity of the (7,6), (9,5), and (12,1) indices were strong and the chirality distribution was narrower than those of the micellar solutions. This indicates that the aqueous solution of 4 has a tendency to dissolve semiconducting SWNTs with diameters in the range of 0.89-1.0 nm, which are larger than those SWNTs (0.76-0.97 nm) dissolved in the aqueous micelles of SDS and HTAB.     

Synthesis of novel rod-shaped and star-shaped fluorescent phosphane oxides--nonlinear optical properties and photophysical properties

The design of a new class of fluorophores is presented. Some push-pull chromophores (D-pi-A) containing polyphenylethynyl units and a phosphane oxide moiety were efficiently prepared from common intermediates. Straightforward syntheses gave novel one-armed, rod-shaped and three-armed, star-shaped fluorophores. The optical properties of the resulting star-shaped derivatives were evaluated, showed high fluorescence quantum yields, and their excitation induces very efficient charge redistribution. Moreover, thanks to their push-pull character, the molecules exhibited significant second-order NLO properties with good transparency, up to 67x10(-30) esu at 1907 nm, with an absorption lambdamax at 369 nm. The effect of the donor group and of the number of phenylethynyl arms have been studied in this work.     

Superstructure-dependent optical and electrical properties of an unusual face-to-face, pi-stacked, one-dimensional assembly of dehydrobenzo[12]annulene in the crystalline state

To develop a novel pi-conjugated molecule-based supramolecular assembly, we designed and synthesized trisdehydrotribenzo[12]annulene ([12]DBA) derivative 2 with three carboxyl groups at the periphery. Recrystallization of 2 from DMSO gave a crystal of the solvate 23 DMSO. Crystallographic analysis revealed, to our surprise, that a face-to-face pi-stacked one-dimensional (1D) assembly of 2 was achieved and that the DMSO molecule played a significant role as a "structure-dominant element" in the crystal. This is the first example of [12]DBA to stack completely orthogonal to the columnar axis. To reveal its superstructure-dependent optical and electrical properties, 2 and its parent molecule 1, which crystallizes in a herringbone fashion, were subjected to fluorescence spectroscopic analysis and charge-carrier mobility measurements in crystalline states. The 1D stacked structure of 2 provides a red-shifted, broadened, weakened fluorescence profile (lambda(max) = 545 nm, phi(F) = 0.01), compared to 1 (lambda(max) = 491 nm, phi(F) = 0.12), due to strong interactions between the p orbitals of the stacked molecules. The charge-carrier mobility of the single crystal of 23 DMSO, as well as 1, was determined by flash photolysis time-resolved microwave conductivity (FP-TRMC) measurements. The single crystal of 23 DMSO revealed significantly-anisotropic charge mobility (sigma(mu) = 1.5x10(-1) cm(2) V(-1) s(-1)) along the columnar axis (crystallographic c axis). This value is 12 times larger than that along the orthogonal axis (the a axis).     

Sequence-controlled oligomers fold into nanosolenoids and impart unusual optical properties

Controlled syntheses give unique block oligomers with alternating flexible ethylene glycol and rigid perylenetetracarboxylic diimide (PDI) units. The number of rigid units vary from n=1 to 10. PDI units were stitched together by using efficient phosphoramidite chemistry. The resulting oligomers undergo folding in most solvents, including chloroform. In their ground state, these folded oligomers were characterized by using Fourier transform ion cyclotron resonance mass spectrometry (FTICR‐MS), NMR spectroscopy, and electronic absorption spectroscopy. FTICR‐MS revealed the exact masses of these sequence‐controlled oligomers, which confirmed the chemical composition and validated the synthetic strategy. The NMR neighboring ring‐current effect (NRE) indicates the formation of cofacial π stacks; the stacked aromatic rings have nearly coaxial alignment akin to a nanosoleniod. Nanosolenoidal shielding in π stacks causes all aromatic protons to shift upfield, whereas NOE in a cyclic hetero‐chromophoric dimer supports a rotated, cofacial π‐stacking orientation separated by about 3.5 Å. Electron–phonon coupling is much stronger than excitonic coupling in these self‐folded PDI oligomers; thus, Franck–Condon factors dictate the observed spectral features in visible spectra. The absorbance spectrum exhibits weak hypochromism due to π stacking with increasing stacking units n. Finally, ab initio calculations support the experimental observations, indicating 3.5 Å cofacial spacing in which one molecule is rotated 30° from the eclipsed orientation and higher oligomers can adopt, without a compensating energy penalty, either the right/left‐handed helices or the 1,3‐eclipsed structures. Both theory and experiments validate the nano‐π‐solenoids and their novel photophysical properties.     

Synthesis and nonlinear optical properties of a novel indium phthalocyanine highly branched polymer

Due to the well‐known optical limiting properties of indium (III) phthalocyanines (In [III] Pcs) and aiming at extending their conjugation system, a highly branched indium phthalocyanine polymer was prepared. Flash chromatography was used for obtaining a pure polymer of polydispersity index near to the unity. The structure of the prepared polymer was determined using different spectroscopic techniques. Optical limiting and open aperture Z‐scan measurements were carried out according standard procedures. Compared with many other phthalocyanines, the prepared indium‐phthalocyanine polymer shows a high optical limiting performance that is indicated by a relatively low limiting threshold of 430 mJ cm^?2 and a large nonlinear absorption coefficient (α₂ = 3.4 × 10^?8 cmW^?1). Copyright © 2015 John Wiley & Sons, Ltd.     

芳香羧酸钕配合物的合成及其光谱性质研究

本文以1,10-phenanthroline为第二配体,Nd2O3与芳香羧直接反应合成了四种芳香羧酸钕配合物:NdF3phen(F:呋喃-2-甲酸、phen:1,10-phenanthroline)、NdT3phen(T:噻吩-2-甲酸)、NdB3phen(B:苯甲酸)、NdN3phen(N:1-萘甲酸).产物用FTI...     

Synthesis and Characterization of 6,13‐Diamino‐Substituted Pentacenes

A series of 6,13‐diamino‐substituted pentacenes 1 a – d has been prepared and characterized as a new class of pentacene derivatives with strong donor ability and enhanced solubility in common organic solvents. The spectroelectrochemical and DFT studies revealed that the two‐electron oxidation process was accompanied by the substantial structural change into a butterfly‐like conformation of the pentacene moiety. More importantly, the extent of deformation from the planar pentacene moiety in the dications of 6,13‐diaminopentacene is tunable by varying the N‐substituents.     

Synthesis and electronic properties of monodisperse oligophenothiazines

Starting from N-hexylphenothiazine, a versatile construction kit of brominated and borylated phenothiazines can be easily prepared by a sequence of bromination, bromo-lithium exchange/borylation, and Suzuki coupling. Subsequent Suzuki arylation of the building blocks gives soluble, monodisperse, and structurally well defined oligophenothiazines in good yields. The molecular weights at the peak maximum (Mp), obtained by GPC (gel permeation chromatography), and the actual molecular weights of the oligomer series, obtained by mass spectrometry, show excellent correlation. A QM/MM conformational analysis for the complete series reveals that the obvious butterfly-shaped phenothiazine structure multiplies and significantly reduces the hydrodynamic volume of the oligomers. The electronic properties (absorption and emission spectroscopy and cyclic voltammetry) give reasonable correlations with the chain length. With regard to the emission maxima, the effective conjugation length is already reached with the hexamer. Oligophenothiazines are highly fluorescent, with high fluorescence quantum yields, and are simultaneously highly electroactive, with low oxidation potentials.     

Synthesis and photophysical properties of annulated dinuclear and trinuclear phthalocyanines

Metal-free mononuclear, dinuclear and trinuclear phthalocyanines were prepared by a mixed cyclotetramerisation of a 1,2,4,5-tetracyanobenzene derivative and 4,5-bis(2,6-dimethylphenoxy)phthalonitrile. For the first time, a pi-electron-conjugated trinuclear phthalocyanine was synthesised with phthalocyanine units connected by common annulated benzene rings. The Q band of the trinuclear compound in solution occurs at lambda = 944 nm whereas those of the dinuclear and mononuclear compounds are at lambda = 853/830 and 701/664 nm, respectively. Fluorescence quantum yields, fluorescence lifetimes and singlet-oxygen quantum yields of the compounds were determined.     

Effect of Axial Ligands on Easy-Axis Anisotropy and Field-Induced Slow Magnetic Relaxation in Heptacoordinated FeII Complexes

A rational approach to modulating easy-axis magnetic anisotropy by varying the axial donor ligand in heptacoordinated Fe^II complexes has been explored. In this series of complexes with formulae of [Fe(H₄L)(NCS)₂] ⋅ 3 DMF ⋅ 0.5 H₂O ( 1 ), [Fe(H₄L)(NCSe)₂] ⋅ 3 DMF ⋅ 0.5 H₂O ( 2 ), and [Fe(H₄L)(NCNCN)₂] ⋅ DMF ⋅ H₂O ( 3 ) [H₄L=2,2′-{pyridine-2,6-diylbis(ethan-1-yl-1-ylidene)}bis(N-phenylhydrazinecarboxamide)], the axial positions are successively occupied by different nitrogen-based π-donor ligands. Detailed dc and ac magnetic susceptibility measurements reveal the existence of easy-axis magnetic anisotropy for all of the complexes, with 1 [U_eff=21 K, τ₀=1.72×10⁻⁶ s] and 2 [U_eff=25 K, τ₀=2.25×10⁻⁶ s] showing field-induced slow magnetic relaxation behavior. However, both experimental studies and theoretical calculations indicate the magnitude of the D value of complex 3 to be larger than those of complexes 1 and 2 due to the axial bond angle being smaller than that for an ideal geometry. Detailed analysis of the field and temperature dependences of relaxation time for 1 and 2 has revealed that multiple relaxation processes (quantum tunneling of magnetization, direct, and Raman) are involved in slow magnetic relaxation for both of these complexes. Magnetic dilution experiments support the role of intermolecular short contacts.     

Synthesis and optical properties of new polyurethane cationomers with anchored stilbene chromophores

An ionic diol bearing a one‐sided urethane‐stilbene group located on the ammonium quaternary structure was prepared and proposed as an intermediate for polyurethane ionomer synthesis. Polyurethane cationomers with stilbene ionic groups based on poly(tetramethylene oxide) diols, 4,4′‐diphenylmethane diisocyanate and the aforementioned ionic diol, were synthesized and characterized. Some aspects of the trans–cis photoisomerism and fluorescent emission of the stilbene chromophore in polyurethane cationomers were studied comparatively with the urethane‐stilbene diol. The stilbene polycations absorbed at λ_A = 316 nm and emitted violet‐blue light with an emission maxima at λ_F = 444 nm (dimethylformamide solution) and λ_F = 465 nm (film). These polymers are known for their elastomeric properties and are assumed to be of great interest for some future applications. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1918–1928, 2002     

Conformational effects of bay substituents on optical, electrochemical and dynamic properties of perylene bisimides: macrocyclic derivatives as effective probes

A series of diagonally and laterally bridged regioisomeric macrocycles based on 1,6,7,12-tetraaryloxy-substituted perylene bisimides (APBIs) have been synthesized and characterized. The different orientations of the aryloxy residues, that is, horizontal or perpendicular to the perylene core, in the regioisomeric macrocycles have been elucidated by NMR spectroscopy, and the dynamic properties of the laterally bridged regioisomers have been investigated by temperature-dependent NMR measurements. The influence of the different orientations of the aryloxy substituents on the electrochemical properties of APBIs is demonstrated by cyclic voltammetry, which reveals that a perpendicular orientation of the aryloxy residues relative to the perylene core leads to a substantial decrease of the LUMO energy level of the perylene bisimide electrophore. The optical properties of the regioisomeric macrocycles have been determined by UV/Vis and fluorescence spectroscopy. It has been shown that the diagonally bridged macrocycles exhibit optical properties that differ significantly from those of an open-chain reference compound, whereas the optical properties of the laterally bridged isomers resemble those of the reference system. This demonstrates that unrestricted aryloxy substituents prefer the lateral conformation in solution. Solvent-dependent fluorescent properties have been exemplified for one diagonally bridged derivative, suggesting a photoinduced electron transfer process as fluorescence quenching mechanism for APBIs. From these investigations, guidelines toward highly fluorescent APBI dyes in polar media could be derived.     

Synthesis and optical properties of fluorene‐based polymers incorporating organosilicon unit

The synthesis and optical properties of polymers bearing the repeating unit of terfluorene and various organosilicon groups were investigated. Polymers with high molecular weight and good solubility could be obtained by Suzuki coupling polymerization from silylene‐containing fluorene‐based dibromo monomers and 9,9‐dihexylfluorene‐2,7‐bis(trimethyleneborate). From UV spectra of polymers bearing acyclic silylene bridge, the organosilicon units not only interrupted a π‐conjugation but also contributed to an electronic communication between connected fluorenes. The emission maximum wavelengths (ca. 400 nm) blue‐shifted when compared with that of polyfluorene (418 nm) and the fluorescence quantum yields were considerably high (>0.82) in the CHCl₃ solution. On the other hand, rather broad emission was observed at 480 nm and the fluorescence quantum yield was quite low (0.004) in the solution‐state PL spectrum of tetraphenylsilole‐containing polymer. The polymer emitted visible green light in the spin‐coated film. The fluorescence peak intensity at 486 nm gradually decreased when the film was illuminated with the UV light of 359 nm in air. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4786–4794, 2007     

Chain orientation and anisotropies in optical and dielectric properties in thin films of stiff polyimides

Thin films of poly(p-phenylene biphenyltetracarboximide) (BPDA-PDA), prepared by thermal imidization of the precursor poly(amic acid) on substrates, have been investigated by optical waveguide, ultraviolet-visible (UV-VIS), infrared (IR), and dielectric spectroscopies. The polyimide films exhibit an extraordinarily large anisotropy in the refractive indices with the in-plane index n_∥ = 1.806 and the out-of-plane index n_⊥ = 1.589 at 1064 nm wavelength. No discernible effect of the film thickness on this optical anisotropy is found between films of ca. 2.1 and ca. 7.8 μm thickness. This large birefringence is attributed to the preferential orientation of the biphenyltetracarboximide moieties with their planes parallel to the film surface, coupled with the strong preference of BPDA-PDA chains to align along the film plane. The frequency dispersion of the in-plane refractive index n_∥ is consistent with the results calculated by the Lorentz–Lorenz equation from the UV-visible spectrum exhibiting several absorption bands in the 170–500 nm region. The contribution from the IR absorption in the range 7000–400 cm,^?1 computed by the Spitzer-Kleinmann dispersion relations from the measured spectra, adds ca. 0.046 to the in-plane refractive index n_∥. Tilt-angle–dependent polarized IR results indicate nearly the same increase for the out-of-plane index n_⊥. Application of the Maxwell relation then leads to the out-of-plane dielectric constant ε^⊥ ? 2.7 at 1.2 × 10¹³ Hz, as compared with the measured value of ca. 3.0 at 10⁶ Hz. Assuming this small difference to remain the same for the in-plane dielectric constants ε_∥, we obtain a very large anisotropy in the dielectric properties of these polyimide films with the estimated in-plane dielectric constant ε_∥ ? 3.4 at 1.2 × 10¹³ Hz, and ε_∥ ? 3.7 at 10⁶ Hz. © 1992 John Wiley & Sons, Inc.     

“Dial-In” Emission from a Unique Flexible Material with Polarization Tuneable Spectral Intensity

The development of organic photoluminescent materials, which show promising roles as catalysts, sensors, organic light-emitting diodes, logic gates, etc., is a major demand and challenge for the global scientific community. In this context, a photoclick polymerization method is adopted for the growth of a unique photoluminescent three-dimensional (3D) polymer film, E, as a model system that shows emission tunability over the range 350–650 nm against the excitation range 295–425 nm. The DFT analysis of energy calculations and π-stacking supports the spectroscopic observations for the material exhibiting a broad range of emission owing to newly formed chromophoric units within the film. Full polarization spectroscopic Mueller matrix studies were employed to extract and quantify the molecular orientational order of both the ground (excitation) and excited (emission) state anisotropies through a set of newly defined parameters, namely the fluorescence diattenuation and fluorescence polarizance. The information contained in the recorded fluorescence Mueller matrix of the organic polymer material provided a useful way to control the spectral intensity of emission by using pre- and post-selection of polarization states. The observation was based on the assumption that the longer lifetime of the excited dipolar orientation is attributed to the compactness of the film.     

Comparative study on the structural, optical, and electrochemical properties of bithiophene-fused benzo[c]phospholes

Three types of bithiophene-fused benzo[c]phospholes were successfully prepared by Ti(II)-mediated cyclization of the corresponding dialkynylated bithiophene derivatives as a key step. Each sigma(3)-phosphorus center of the benzo[c]phosphole subunits was readily transformed into sigma(4)-phosphorus center by Au coordination or oxygenation. In addition, the bithiophene subunit was functionalized at the alpha,alpha'-carbon atoms by Pd-catalyzed cross-coupling reactions with heteroarylmetals and by an S(N)Ar reaction with hexafluorobenzene. The experimentally observed results (NMR spectroscopy, X-ray analysis, UV/Vis absorption/fluorescence spectroscopy, and cyclic/differential-pulse voltammetry) have revealed that the structural, optical, and electrochemical properties of the bithiophene-fused benzo[c]phospholes vary considerably depending on the pi-conjugation modes at the bithiophene subunits and the substituents of the heterocyclopentadiene components. The appropriately ring-annulated sigma(3)-P derivatives and sigma(4)-P-AuCl complexes were found to emit fluorescence in the orange-red region, and the sigma(4)-P-oxo derivatives proved to undergo reversible one-electron reduction at -1.4 to -1.8 V (vs ferrocene/ferrocenium). These results indicate that the bithiophene-fused benzo[c]phospholes possess narrow HOMO-LUMO gaps and low-lying LUMOs, which was confirmed by density functional theory calculations of their model compounds. The time-of-flight measurement of an ITO/benzo[c]phosphole/Al device showed that the electron mobility in the P-oxo derivative is one-order higher than that in Alq(3) at low electric fields. The present study demonstrates that the arene-fused benzo[c]phosphole skeleton could be a highly promising platform for the construction of a new class of phosphole-based optoelectrochemical materials.