Photopolymerization of methyl methacrylate and other vinyl monomers with the use of N-bromosuccinimide as photoinitiator

Polymerization of MMA was done in the presence of visible light (440 nm) with the use of N-bromosuccinimide (NBS) as the photoinitiator. The initiator exponent and intensity exponent were 0.5, and the monomer exponent was found to be unity. The polymerization was inhibited in the presence of hydroquinone. The average k_p²/k_t for this photopolymerization system was found to be 0.296 × 10^?2 and the activation energy of photopolymerization was 4.67 kcal/mole. Kinetic and other evidence indicate that the overall polymerization takes place by a radical mechanism. With NBS as the photoinitiator, the order of polymerizability at 40°C was MMA, EMA ? MA ? VA, and styrene could not be polymerized under similar conditions.     

Photopolymerization of methyl methacrylate and some other vinyl monomers with the use of a pyridine–bromine charge-transfer complex as photoinitiator

Polymerization of MMA was carried out under visible light (440 nm) with the use of pyridine–bromine (Py–Br₂) charge-transfer (CT) complex as the photoinitiator. Initiator exponent and intensity exponent were 0.5 and 0.43, respectively, and the monomer exponent was found to be dependent on the nature of the solvent or diluent used. The Polymerization was inhibited in the presence of hydroquinone, but oxygen had very little inhibitory effect. An average value of k_p²/k_t for this polymerization system was 1.19 × 10^?2, and the activation energy of photopolymerization was 4.95 kcal/mole. Kinetic data and other evidence indicate that the overall polymerization takes place by a radical mechanism. With Py–Br₂ complex as the photoinitiator, the order of polymerizability at 40°C was found to be MMA, EMA ? Sty, MA.     

Photopolymerization of methyl methacrylate by use of a quinoline–bromine charge-transfer complex as the photoinitiator

Polymerization of MMA was carried out in presence of visible light (440 nm), quinoline-bromine charge-transfer complex being used as the photoinitiator. The initiator exponent was observed to be 0.5 up to 0.014 M initiator concentration; when chloroform was used as the solvent, the monomer exponent was found to be unity. The polymerization was inhibited in presence of hydroquinone but little inhibitory effect was observed in the presence of air. An average value of k²_p/k_t for this photopolymerization system was found to be (1.08 ± 0.22) × 10^-2. Kinetic and other evidence indicates that the overall polymerization takes place by a radical mechanism.     

Polymerization of Methyl Methacrylate with Bis(Cyclopentadienyl)Titanium Dichloride in a Water-Methanol Mixture: Formation of Tetrahydrofuran-Insoluble Polymer

Abstract

Methyl methacrylate (MMA) was found to be effectively polymerized with bis(cyclopentadienyl)titanium dichloride (CP₂TiCl₂) in a water-methanol mixture (1:1, v/v). The polymerization proceeded heterogeneously because the resulting poly(MMA) was insoluble in the system. The rate (R _p) of the heterogenous polymerization was apparently expressed by R _p = k[Cp₂TiCl₂]²[MMA]^2˙5 (at 40°C). The resulting poly(MMA) was observed to consist of tetrahydrofuran (THF)-soluble and insoluble parts. In contrast with the usual radical poly(MMA), the THF-insoluble part was soluble in benzene, toluene, and chloroform but insoluble in polar solvents such as ethyl acetate, acetone, acetonitrile, dimethylformamide, and dimethylsulfoxide. The polymerization was found to be profoundly accelerated by irradiation with a fluorescent room lamp (15 W). The results of copolymerization of MMA and acrylonitrile indicated that the present polymerization proceeds through a radical mechanism.     

Copper Catalyzed ATRP of Methyl Methacrylate Using Aliphatic α-Bromo Ketone Initiator

The atom transfer radical polymerization (ATRP) of MMA was examined using 3-bromo-3-methyl-butanone-2 (MBB) as an initiator in the presence of CuBr as catalyst and 2,6-bis[1-(2,6-diisopropylphenylimino)ethyl]pyridine (BPIEP) as a tridentate N-donor ligand. The effect of various other N-donor ligands including a bisoxazoline ligand, namely, 2,6-bis(4,4-dimethyl-2-oxazolin-2-yl) pyridine (dmPYBOX) was studied in ATRP and reverse ATRP of MMA. The ATRP of MMA in toluene at 90 °C using MBB as initiator was relatively slow in the case of bidentate and faster in the case of tridentate N-donor ligands. The apparent rate constant, k_app, with MBB as initiator and BPIEP as ligand in toluene (50%, v/v) at 90 °C was found to be 7.15 × 10⁻⁵ s⁻¹. In addition, reverse ATRP of MMA in diphenylether at 70 °C using BPIEP/CuBr₂ as catalyst system was very effective in reducing the reaction time from several hours to 24 h for polymerization of MMA.     

Photopolymerization of methyl methacrylate with the use of iodine as the photoinitiator

Kinetics of photopolymerization of MMA at 40°C with the use of iodine as the photoinitiator was studied. At low range of iodine concentration (< 0.0004M), the rate of polymerization was proportional to square root of iodine concentration and the monomer exponent was 2.5, while at a higher range of iodine concentration, (0.0005–0.002M) the initiator exponent and monomer exponent were zero and 3.6–3.8 (i.e., close to 4), respectively. The chain-transfer constant of iodine at 40°C was found to be 6.0. Polymerization was found to be largely inhibited in the presence of relatively high concentrations of iodine (> 0.005M) and also in presence of hydroquinone. Kinetic and other data indicate a radical mechanism of polymerization involving complexation of monomer molecules with iodine prior to radical generation, and termination is believed to take place bimolecularly at low iodine concentrations and unimolecularly, involving reaction with iodine, at high iodine concentrations (initiator termination).     

Effect of triphenyl phosphite on the radical polymerization of styrene and methyl methacrylate

The effects of triphenyl phosphite (TPP) on the radical polymerization of styrene (St) and methyl methacrylate (MMA) initiated with α,α,-azobisisobutyronitrile (AIBN) was investigated at 50°C. The rate of polymerization of St and MMA at a constant concentration of TPP was found to be proportional to the monomer concentration and the square root of the initiator concentration. The rate of polymerization and the degree of polymerization of both St and MMA increased with increasing TPP concentration. The accelerating effect was shown to be due to the decrease of the termination rate constant k_t with an increase in the viscosity of the polymerization systems. The chain transfer constant C_tr of TPP in St and MMA systems was determined from the degree of polymerization system. The C_tr of TPP was almost zero in the St system and 6.5 × 10^?5 in the MMA system.     

Polymerization of Methyl Methacrylate in the Presence of Imidazole Derivatives. Kinetics and Polymer Structure

The kinetics of the polymerization of methyl methacrylate (MMA) in the presence of imidazole (Im), 2-methylimidazole (2MIm), or benz-imidazole (BIm) in tetrahydrofuran (THF) at 15–40°C was investigated by dilatometry. The rate of polymerization, R_p , was expressed by R_p = k[Im] [MMA]², where k = 3.0 × 10^?6 L²/(mol² s) in THF at 30°C. The overall activation energy, E_a , was 6.9 kcal/mol for the Im system and 7.3 kcal/mol for the 2MIm system. The relation between logR_p and 1 T was not linear for the BIm system. The polymers obtained were soluble in acetone, chloroform, benzene, and THF. The melting points of the polymers were in the range of 258–280°C. The ¹H-NMR spectra indicated that the polymers were made up of about 58–72% of syndiotactic structure. The polymerization mechanism is discussed on the basis of these results.     

Laser‐induced decomposition of 2,2‐dimethoxy‐2‐phenylacetophenone and benzoin in methyl methacrylate homopolymerization studied via matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Pulsed laser polymerization (PLP) experiments were performed on the bulk polymerization of methyl methacrylate (MMA) at ?34 °C. The aim of this study was to investigate the polymer end groups formed during the photoinitiation process of MMA monomer using 2,2‐dimethoxy‐2‐phenylacetophenone (DMPA) and benzoin as initiators via matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectrometry. Analysis of the MALDI‐TOF spectra indicated that the two radical fragments generated upon pulsed laser irradiation show markedly different reactivity toward MMA: whereas the benzoyl fragment—common to both DMPA and benzoin—clearly participates in the initiation process, the acetal and benzyl alcohol fragments cannot be identified as end groups in the polymer. The complexity of the MALDI‐TOF spectrum strongly increased with increasing laser intensity, this effect being more pronounced in the case of benzoin. This indicates that a cleaner initiation process is at work when DMPA is used as the photoinitiator. In addition, the MALDI‐TOF spectra were analyzed to extract the propagation‐rate coefficient, k_p, of MMA at ?34 °C. The obtained value of k_p = 43.8 L mol^?1 s^?1 agrees well with corresponding numbers obtained via size exclusion chromatography (k_p = 40.5 L mol^?1 s^?1). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 675–681, 2002; DOI 10.1002/pola.10150     

Polymerization of methyl methacrylate using isatoic anhydride–bromine donor–acceptor complex as the photoinitiator

Isatoic anhydride (IA) alone did not initiate photopolymerization of methyl metacrylate (MMA) at 40°C when exposed to visible light for about 180 min. But IA, when used in combination with bromine (Br₂) as the initiator, initiated the photopolymerization of MMA readily under the same conditions. This behavior was explained by the formation of a donor-acceptor type of complex between IA and Br₂ in the presence of MMA. The polymerization was found to proceed via a free radical mechanism and the radical generation process was considered to follow an initial complexation reaction between the initiator components and monomer. The complex initiator showed nonideal kinetics for the present system (initiator exponent < 0.5) and was analyzed. The monomer exponents varied from 0.83 to 1.15 normally depending on the nature of solvent used. Initiator-dependent chain termination was significant as well as the bimolecular mode of chain termination. © 1993 John Wiley & Sons, Inc.     

Methyl methacrylate as solvent for the thermal decomposition of the cyclic molecule pinacolone diperoxide: Toward the polymerization process

The decomposition rate constant (k_d) of pinacolone diperoxide (PDP, 3,6‐diterbutyl‐3,6‐dimethyl‐1,2,4,5‐tetraoxacyclohexane) in methyl methacrylate (MMA) is determined by the kinetic study of its thermal decomposition at temperatures from 110 °C to 140 °C. The calculated k_d values for PDP are higher than the corresponding values previously determined and reported for diethyl ketone triperoxide (DEKTP, 3,3,6,6,9,9‐hexaethyl‐1,2,4,5,7,8‐hexaoxacyclononane), for example, at 140 °C the k_d for PDP is 75.4 × 10^?5 s^?1, while for DEKTP, it is 50.6 × 10^?5 s^?1. The difference in the k_d between 130 °C and 140 °C indicates that the decomposition mechanism, sequential and/or concerted, is a function of temperature. The conformations of both initiators justify the higher k_d for PDP in MMA than DEKTP, where one single conformer is found for PDP, whereas 212 conformers are found for DEKTP. Bulk polymerization of MMA using PDP as the initiator reveals also the presence of an induction period, such as in DEKTP case. This work provides mechanistic insights into the interactions among the bifunctional cyclic peroxide PDP and the MMA monomer and their influence on the polymerization kinetics. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 997–1007     

Photopolymerization of methyl methacrylate with the use of iodine monobromide as photoinitiator

Iodine monobromide easily induces photopolymerization of methyl methacrylate (MMA) at 40°C under visible light. Initiator exponent and monomer exponent values were found to be 0.5 and 2, respectively, at low initiator concentrations, while the corresponding values at high initiator concentration conditions were zero and 3. The chain transfer constant of IBr at 40°C was found to be 13.0. Kinetic and other data indicate a radical polymerization mechanism involving complexation of monomer molecules with iodine monobromide prior to radical generation, and termination is believed to take place biomolecularly at low IBr concentrations and unimolecularly, involving reaction with the initiator, at high IBr concentrations (initiator termination).     

Kinetic and ESR studies on radical polymerization of methyl methacrylate in the presence of fullerene

The effect of fullerene (C₆₀) on the radical polymerization of methyl methacrylate (MMA) in benzene was studied kinetically and by means of ESR, where dimethyl 2,2′-azobis(isobutyrate) (MAIB) was used as initiator. The polymerization rate (R_p) and the molecular weight of resulting poly(MMA) decreased with increasing C₆₀ concentration ((0–2.11) × 10⁻⁴ mol/L). The molecular weight of polymer tended to increase with time at higher C₆₀ concentrations. R_p at 50°C in the presence of C₆₀ (7.0 × 10⁻⁵ mol/L) was expressed by R_p = k[MAIB]^0.5[MMA]^1.25. The overall activation energy of polymerization at 7.0 × 10⁻⁵ mol/L of C₆₀ concentration was calculated to be 23.2 kcal/mol. Persistent fullerene radicals were observed by ESR in the polymerization system. The concentration of fullerene radicals was found to increase linearly with time and then be saturated. The rate of fullerene radical formation increased with MAIB concentration. Thermal polymerization of styrene (St) in the presence of resulting poly(MMA) seemed to yield a starlike copolymer carrying poly(MMA) and poly(St) arms. The results (r₁ = 0.53, r₂ = 0.56) of copolymerization of MMA and St with MAIB at 60°C in the presence of C₆₀ (7.15 × 10⁻⁵ mol/L) were similar to those (r₁ = 0.46, r₂ = 0.52) in the absence of C₆₀. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2905–2912, 1998     

Radical polymerization and copolymerization of methyl α-(2-carbomethoxyethyl)acrylate,a dimer of methyl acrylate,as a polymerizable α-substituted acrylate

Polymerization and copolymerization of methyl α-(2-carbomethoxyethyl)acrylate (MMEA), which is known as a dimer of methyl acrylate, were studied in relation to steric hindrance-assisted polymerization. The propagating polymer radical from MMEA was detected as a five-line spectrum and quantified by ESR spectroscopy during the bulk polymerization at 40–80°C. The absolute rate constants of propagation and termination (κ_p and κ_t) for MMEA at 60°C (κ_p = 19 L/mol s and κ_t = 5.1 × 10⁵ L/mol s) were evaluated using the concentration of the propagating radical at the steady state. The balance of the propagation and termination rates allows polymer formation from MMEA. The polymerization rate of MMEA at 60°C was less than that of MMA by a factor of about 4 at a constant monomer concentration. Although no influence of ceiling temperature was observed at a temperature ranging from 40 to 70°C, addition-fragmentation in competition with propagation reduced the molecular weight of the polymer. The content of the unsaturated end group was estimated to be 0.1% at 60°C to the total amount of the monomer units consisting of the main chain. MMEA exhibited reactivities almost similar to those of MMA toward polymer radicals. It is concluded that MMEA is one of the polymerizable acrylates bearing a substituted alkyl group as an α-substituent. Characterization of poly(MMEA) was also carried out. © 1996 John Wiley & Sons, Inc.     

Photopolymerization of methyl methacrylate with the use of morpholine-chlorine charge transfer complex as the photoinitiator

Polymerization of methyl methacrylate (MMA) was kinetically studied under photo condition using near UV visible light at 40°C and employing morpholine (MOR)–chlorine (Cl₂) charge transfer (C-T) complex as the photoinitiator. The rate of polymerization (R_p) was dependent on morpholine/chlorine mole ratio; the 1 : 2 (MOR–Cl₂) C-T complex acted as the latent initiator complex, C, which underwent further complexation with the monomer molecules to give the actual initiator complex, I. Using 1 : 2 (MOR-Cl₂) C-T complex as the latent initiator, the initiator exponent evaluated for bulk photopolymerization of MMA was 0.071 and monomer exponent determined from studies of photopolymerization in benzene diluted system was 1.10. Benzoquinone behaved as a strong inhibitor and the polymers tested positive for the incorporation of chlorine atom end groups. Polymerization followed a radical mechanism. Kinetic nonideality as revealed by low (≪0.5) initiator exponent and a monomer exponent of greater than unity were explained in terms of primary radical termination effect. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1681–1687, 1997     

Kinetic study on the radical polymerization of 2‐methacryloyloxyethyl phosphorylcholine

Polymerization of 2‐methacryloyloxyethyl phosphorylcholine (MPC) was kinetically investigated in ethanol using dimethyl 2,2′‐azobisisobutyrate (MAIB) as initiator. The overall activation energy of the homogeneous polymerization was calculated to be 71 kJ/mol. The polymerization rate (R_p) was expressed by R_p = k[MAIB]^0.54±0.05 [MPC]^1.8±0.1. The higher dependence of R_p on the monomer concentration comes from acceleration of propagation due to monomer aggregation and also from retardation of termination due to viscosity effect of the MPC monomer. Rate constants of propagation (k_p) and termination (k_t) of MPC were estimated by means of ESR to be k_p = 180 L/mol · s and k_t = 2.8 × 10⁴ L/mol · s at 60 °C, respectively. Because of much slower termination, R_p of MPC in ethanol was found at 60 °C to be 8 times that of methyl methacrylate (MMA) in benzene, though the different solvents were used for MPC and MMA. Polymerization of MPC with MAIB in ethanol was accelerated by the presence of water and retarded by the presence of benzene or acetonitrile. Poly(MPC) showed a peculiar solubility behavior; although poly(MPC) was highly soluble in ethanol and in water, it was insoluble in aqueous ethanol of water content of 7.4–39.8 vol %. The radical copolymerization of MPC (M₁) and styrene (St) (M₂) in ethanol at 50 °C gave the following copolymerization parameters similar to those of the copolymerization of MMA and St; r₁ = 0.39, r₂ = 0.46, Q₁ = 0.76, and e₁ = +0.51. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 509–515, 2000     

Vinyl polymerization with a binary system of p‐chlorobenzenediazonium salt and sodium tetraphenylborate

A combined system of sodium tetraphenylborate (STPB) and p‐chlorobenzenediazonium tetrafluoroborate (CDF) serves as an effective initiator at low temperatures for acrylate monomers such as methyl methacrylate (MMA), ethyl acrylate, and di‐2‐ethylhexyl itaconate. The polymerization of MMA with the STPB/CDF system has been kinetically investigated in acetone. The polymerization shows a low overall activation energy of 60.3 kJ/mol. The polymerization rate (R_p) at 40 °C is given by R_p = k[STPB/CDF]^0.5[MMA]^1.6, when the molar ratio of STPB to CDF is kept constant at unity, suggesting that STPB and CDF form a complex with a large stability constant and play an important role in initiation and that MMA participates in the initiation process. From the results of a spin trapping study, p‐chlorophenyl and phenyl radicals are presumed to be generated in the polymerization system. A plausible initiation mechanism is proposed on the basis of kinetic and electron spin resonance results. A large solvent effect on the polymerization can be observed. The largest R_p value in dimethyl sulfoxide is 11 times the smallest value in N,N‐dimethylformamide. The copolymerization of MMA and styrene with the STPB/CDF system gives results somewhat different from those of conventional radical copolymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4206–4213, 2001     

Polymerization of α-methyleneindane: A cyclic analog of α-methylstyrene

α-Methyleniedane (MI), a cyclic analog of α-methylstyrene which does not undergo radical homopolymerization under standard conditions, was synthesized and subjected to radical, cationic, and anionic polymerizations. MI undergoes radical polymerization with α,α′-azobis(isobutyronitrile) in contrast to α-methylstyrene, owing to its reduced steric hindrance, though the polymerization is slow even in bulk. Cationic and anionic polymerization of MI with BF₃OEt₂ and n-butyllithium, respectively, proceed rapidly. The thermal degradation behavior of the polymer depends on the polymerization conditions. The anionic and radical polymers are heteortactic-rich. Reactivity ratios in bulk radical copolymerization on MI (M₂) with methacrylate (MMA, M₁) were determined at 60°C (r₁ = 0.129 and r₂ = 1.07). In order to clarify the copolymerization mechanism, radical copolymerization of MI with MMA was investigated in bulk at temperatures ranging from 50 to 80°C. The Mayo–Lewis equation has been found to be inadequate to describe the result due to depolymerization of MI sequences above 70°C.     

A novel tridentate nitrogen donor as ligand in copper catalyzed ATRP of methyl methacrylate

A tridentate ligand, BPIEP: 2,6‐bis[1‐(2,6‐diisopropyl phenylimino) ethyl] pyridine, having central pyridine unit and two peripheral imine coordination sites was effectively employed in controlled/“living” radical polymerization of MMA at 90°C in toluene as solvent, Cu^IBr as catalyst, and ethyl‐2‐bromoisobutyrate (EBiB) as initiator resulting in well‐defined polymers with polydispersities M_w/M_n ≤ 1.23. The rate of polymerization follows first‐order kinetics, k_app = 3.4 × 10^?5 s^?1, indicating the presence of low radical concentration ([P*] ≤ 10^?8) throughout the reaction. The polymerization rate attains a maximum at a ligand‐to‐metal ratio of 2:1 in toluene at 90°C. The solvent concentration (v/v, with respect to monomer) has a significant effect on the polymerization kinetics. The polymerization is faster in polar solvents like, diphenylether, and anisole, as compared to toluene. Increasing the monomer concentration in toluene resulted in a better control of polymerization. The molecular weights (M_n,SEC) increased linearly with conversion and were found to be higher than predicted molecular (M_n,Cal). However, the polydispersity remained narrow, i.e., ≤1.23. The initiator efficiency at lower monomer concentration approaches a value of 0.7 in 110 min as compared to 0.5 in 330 min at higher monomer concentration. The aging of the copper salt complexed with BPIEP had a beneficial effect and resulted in polymers with narrow polydispersitities and higher conversion. PMMA obtained at room temperature in toluene (33%, v/v) gave PDI of 1.22 (M_n = 8500) in 48 h whereas, at 50°C the PDI is 1.18 (M_n = 10,300), which is achieved in 23 h. The plot of lnk_app versus 1/T gave an apparent activation energy of polymerization as (ΔE^≠_app) 58.29 KJ/mol and enthalpy of equilibrium (ΔH⁰_eq) to 28.8 KJ/mol. Reverse ATRP of MMA was successfully performed using AIBN in bulk as well as solution. The controlled nature of the polymerization reaction was established through kinetic studies and chain extension experiments. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4996–5008, 2005     

Photopolymerization of methyl methacrylate with the use of tetrahydrofuran–bromine charge-transfer complex as the photoinitiator

The polymerization of MMA was kinetically studied in the presence of visible light (using a 125-W high-pressure mercury vapor lamp with fluorescent coating, without a filter), a THF—bromine charge-transfer complex being used as the photoinitiator. The initiator exponent was 0.5 in bulk polymerization. The monomer exponent varied from about 1.2 to about 2.5, depending on the nature of the solvent used; the initiator exponent also varied in diluted systems, depending on the nature and proportion of the solvent, the variation being from a value of 0.5 in bulk system to zero or almost zero at about 25% (v/v) solvent concentration. Other kinetic parameters, viz., k_p²/k_t and the activation energy for polymerization, were determined and are reported. Kinetic and other evidence indicates that the photopolymerization takes place by a radical mechanism and termination is bimolecular in nature in bulk systems; in dilute systems, termination by initiator complex assumes predominance, particularly at high solvent concentrations (≥25% v/v).