Photopolymerization of methyl methacrylate and other vinyl monomers with the use of N-bromosuccinimide as photoinitiator

Polymerization of MMA was done in the presence of visible light (440 nm) with the use of N-bromosuccinimide (NBS) as the photoinitiator. The initiator exponent and intensity exponent were 0.5, and the monomer exponent was found to be unity. The polymerization was inhibited in the presence of hydroquinone. The average k_p²/k_t for this photopolymerization system was found to be 0.296 × 10^?2 and the activation energy of photopolymerization was 4.67 kcal/mole. Kinetic and other evidence indicate that the overall polymerization takes place by a radical mechanism. With NBS as the photoinitiator, the order of polymerizability at 40°C was MMA, EMA ? MA ? VA, and styrene could not be polymerized under similar conditions.     

Photopolymerization of methyl methacrylate with the use of tetrahydrofuran–bromine charge-transfer complex as the photoinitiator

The polymerization of MMA was kinetically studied in the presence of visible light (using a 125-W high-pressure mercury vapor lamp with fluorescent coating, without a filter), a THF—bromine charge-transfer complex being used as the photoinitiator. The initiator exponent was 0.5 in bulk polymerization. The monomer exponent varied from about 1.2 to about 2.5, depending on the nature of the solvent used; the initiator exponent also varied in diluted systems, depending on the nature and proportion of the solvent, the variation being from a value of 0.5 in bulk system to zero or almost zero at about 25% (v/v) solvent concentration. Other kinetic parameters, viz., k_p²/k_t and the activation energy for polymerization, were determined and are reported. Kinetic and other evidence indicates that the photopolymerization takes place by a radical mechanism and termination is bimolecular in nature in bulk systems; in dilute systems, termination by initiator complex assumes predominance, particularly at high solvent concentrations (≥25% v/v).     

Photopolymerization of methyl methacrylate and some other vinyl monomers with the use of a pyridine–bromine charge-transfer complex as photoinitiator

Polymerization of MMA was carried out under visible light (440 nm) with the use of pyridine–bromine (Py–Br₂) charge-transfer (CT) complex as the photoinitiator. Initiator exponent and intensity exponent were 0.5 and 0.43, respectively, and the monomer exponent was found to be dependent on the nature of the solvent or diluent used. The Polymerization was inhibited in the presence of hydroquinone, but oxygen had very little inhibitory effect. An average value of k_p²/k_t for this polymerization system was 1.19 × 10^?2, and the activation energy of photopolymerization was 4.95 kcal/mole. Kinetic data and other evidence indicate that the overall polymerization takes place by a radical mechanism. With Py–Br₂ complex as the photoinitiator, the order of polymerizability at 40°C was found to be MMA, EMA ? Sty, MA.     

Effect of pyridine on the kinetics of polymerization of styrene initiated by benzoyl peroxide and azobisisobutyronitrile at 60°C

Kinetics of solution polymerization of styrene was studied using pyridine as solvent and BZ₂O₂ and azobisisobutyronitrile (AIBN) as initiators at 60°C. Normal kinetic features (R_p ∝ [AIBN]^0.5 · [styrene]^1.0) were observed for the AIBN-initiated polymerization, with pyridine playing the role of an inert diluent; but in the BZ₂O₂-initiated polymerization, the monomer exponent was found to vary from a low value of 0.45 at a relatively low initiator concentration (1 × 10^?2 mole/liter) to a value higher than the usual value of unity (1.18) at a much higher concentration of the initiator (16 × 10^?2 mole/liter). The initiator exponent value was found to be 0.5 (usual) up to 20% v/v dilution with pyridine, but it showed a tendency to decrease with increase in pyridine content beyond 20% v/v. The k/k_t value for each initiator system, however, was found to remain constant over the whole concentration range of pyridine. The unusual kinetic features were explained on the basis of predominance of one or the other of two competitive reactions in BZ₂O₂-initiated system: (a) higher rate of decomposition of BZ₂O₂ in pyridine and (b) primary radical depletion by reaction with pyridine, depending upon the concentration of BZ₂O₂ and pyridine.     

Studies on polymerization of vinyl acetate using ylide as an initiator and degradative transfer agent

Polymerization of vinyl acetate initiated by β-picolinium p-chlorophenacylide was carried out at 30, 35, and 40°C, using conventional dilatometric technique. The initiator and the monomer exponent values were 0.80 ± 0.15 and unity, respectively. The polymerization was inhibited in the presence of hydroquinone, but was favored by nonpolar solvent and polymerization temperature. The energy of activation was 90.3 KJ mol^?1. An average value of k/k_t for the present system was found to be 0.37 × 10^?2. The results are explained in terms of a radical mode of polymerization with degradative initiator transfer; the principal mode of termination, however, was bimolecular.     

Studies on polymerization of vinyl acetate using ylide as an initiator and degradative transfer agent

The polymerization of vinyl acetate initiated by β-picolinium-p-chlorophenacylide was carried out at 30, 35, and 40°C, using the conventional dilatometric technique. The initiator and the monomer exponent values were 0.80 ± 0.15 and unity, respectively. The polymerization was inhibited in the presence of hydroquinone, but was favored by nonpolar solvent and polymerization temperature. The energy of activation was 90.3 kJ mol^?1. An average value of k/k_t for the present system was found to be 0.37 × 10^?2 L mol^?1 s^?1. The results are explained in terms of radical mode of polymerization with degradative initiator transfer; the principal mode of termination, however, was biomolecular.     

Kinetics and Mechanism of Polymerization of Methyl Methacrylate using Selenonium Ylide as a Novel Initiator

Polymerization of Methyl methacrylate (MMA) was carried out in dioxan at 60 ± 1°C for 90 min in dilatometer under nitrogenous atmosphere using diphenylselenonium 2,3,4,5-tetraphenylcyclopentadienylide (selenonium ylide) as a novel initiator. The exponent values for initiator and monomer were computed as 0.32 and 1.59, respectively. The overall activation energy and k_p ²/k_t were found 42.1 k J mol^?1 and 0.819 l mol^?1s^?1, respectively. The free radical mode of polymerization was confirmed by ESR spectroscopy. The FT-IR, ¹H-NMR and ¹³C-NMR spectroscopic techniques were used for its characterization.     

Studies on the polymerization of methyl methacrylate activated by azobisisobutyramidine

Kinetic studies on methyl methacrylate polymerization were carried out with watersoluble 2,2′-azobisisobutyramidine (ABA). The rate of polymerization was proportional to the square root of the initiator concentration in the solvents chloroform, methanol, and dimethyl sulfoxide (DMSO), which confirms the bimolecular nature of the termination reaction. The monomer exponent was unity in chloroform but in methanol and DMSO the rate of polymerization passed through a maximum when plotted against the monmer concentration. This behavior in methanol has been attributed to be due to the enhanced rate of production of radical with increasing proportion of methanol. The rate of decomposition of the ABA has been observed to be faster in methanol than in chloroform. The situation becomes more complicated with DMSO, which was found to reduce the value of δ = (2k_t)^1/2/k_p in methyl methacrylate polymerization. The rate of polymerization was observed to be highly dependent on the nature of the solvent, the rate increasing with increased electrophilicity of the solvent. The dependence of R_p on the solvent has been explained in the light of the stabilization of the transition state due to increased solvation of the basic amidine group of the initiator with the increased electrophilicity of the solvent.     

Photopolymerization of methyl methacrylate using a morpholine–sulfur dioxide charge-transfer complex as the photoinitiator

Photopolymerization of the vinyl monomer (M) of methyl methacrylate (MMA) was kinetically studied by using near-UV/visible light at 40°C and employing a morpholine (MOR)–sulfur dioxide (SO₂) charge-transfer (C-T) complex as the photoinitiator. The rate of polymerization (R_P) was found to be dependent on the morpholine: sulfur dioxide mole ratio; the 1 : 2 (MOR–SO₂) complex acted as the latent initiator complex C which underwent further complexation with the monomer molecules to give the actual initiating complex I. Using the 1 : 2 (MOR–SO₂) C-T complex as the latent initiator, the observed kinetics may be expressed as R_P [MOR–SO₂]^0.27[M]^1.10. Benzoquinone behaved as a strong inhibitor. Polymers obtained tested positive for the incorporation of a sulphonate-type end group. Polymerization followed a radical mechanism. Kinetic nonideality as revealed by a low initiator exponent and monomer exponent of greater than unity was explained on the basis of a prominent primary radical termination effect. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1973–1979, 1998     

Novel solvent effects in the photopolymerization of methyl methacrylate by use of quinoline–bromine charge-transfer complex as photoinitiator

Photopolymerization of MMA was carried out at 40°C in diluted systems by use of quinolinebromine (Q–Br₂) charge-transfer complex as the initiator and chloroform, carbon tetrachloride, chlorobenzene, dioxane, THF, acetone, benzene, toluene, quinoline, and pyridine as solvents. The results showed variable monomer exponents ranging from 1 to 3. For chloroform, carbon tetrachloride, and chlorobenzene, the monomer exponent observed was unity; for other solvents used, the value of the same exponent was much higher (between 2 and 3). Initiation of polymerization is considered to take place through radicals generated in the polymerization systems by the photodecomposition of (Q–Br₂)–monomer complex (C) formed instantaneously in situ on addition of the Q–Br₂ complex in monomer. The kinetic feature of high monomer exponent is considered to be due to higher order of stabilization of the initiating complex (C) in presence of the respective solvents. In the presence of the retarding solvents, very low or zero initiator exponents were also observed, depending on the nature and concentration of the solvents used. The deviation from the square-root dependence of rate on initiator concentration becomes higher at high solvent and initiator concentrations in general. This novel deviation is explained on the basis of initiator termination, probably via degradative chain transfer involving the solvent-modified initiating complexes and the propagating radicals.     

Copper Catalyzed ATRP of Methyl Methacrylate Using Aliphatic α-Bromo Ketone Initiator

The atom transfer radical polymerization (ATRP) of MMA was examined using 3-bromo-3-methyl-butanone-2 (MBB) as an initiator in the presence of CuBr as catalyst and 2,6-bis[1-(2,6-diisopropylphenylimino)ethyl]pyridine (BPIEP) as a tridentate N-donor ligand. The effect of various other N-donor ligands including a bisoxazoline ligand, namely, 2,6-bis(4,4-dimethyl-2-oxazolin-2-yl) pyridine (dmPYBOX) was studied in ATRP and reverse ATRP of MMA. The ATRP of MMA in toluene at 90 °C using MBB as initiator was relatively slow in the case of bidentate and faster in the case of tridentate N-donor ligands. The apparent rate constant, k_app, with MBB as initiator and BPIEP as ligand in toluene (50%, v/v) at 90 °C was found to be 7.15 × 10⁻⁵ s⁻¹. In addition, reverse ATRP of MMA in diphenylether at 70 °C using BPIEP/CuBr₂ as catalyst system was very effective in reducing the reaction time from several hours to 24 h for polymerization of MMA.     

Photopolymerization of methyl methacrylate and some other vinyl monomers with the use of chlorine as photoinitiator

Low concentrations (0.001–0.03M) of chlorine easily induce photopolymerization of MMA at 40°C. Kinetic data indicate that polymerization follows a radical mechanism involving complexation of monomer by the initiator and initiation takes place through radical generation during photodecomposition of the initiator-monomer complex. Termination appears to take place bimolecularly. The k_p²/k_t value for MMA polymerization at 40°C was found to be 0.83 × 10^?2. Rates of chlorine-initiated photopolymerization were found to decrease in the order MMA, EMA ? VA, Sty > MA.     

Polymerization initiated by ylide: Polymerization of ethyl methacrylate with the use of 4-picolinium p-chloro phenacylide as initiator

The ylide 4-picolinium, p-chloro phenacylide-initiated thermal polymerization of ethyl methacrylate (EMA) was studied. 4-Picolinium p-chloro phenacylide induces the thermal polymerization of ethyl methacrylate at 65°C. The rate of polymerization (R_p) rose as the initiator concentration increased from 2 × 10^?3 to 4 × 10^?3 M and the initiating exponent was computed as 1.9. The R_p decreased as the concentration of ylide increased from 6 × 10^?2 to 1M. The greater initiator concentration also affected the molecular weight inversely. The polymerization was carried out at different temperatures and the overall activation energy was computed as 4.08 Kcal/mol. Polymerization was inhibited in the presence of hydroquinone as a radical scavenger. Kinetic studies and other data show that the overall polymerization takes place in a radical mechanism. The various kinetic parameters, such as the rate and average degree of polymerization, molecular weight, and energy of activation of the present system, were evaluated.     

Kinetics of polymerization of N-tert-butylacrylamide. Part II

The effect of ferric chloride on the kinetics of the radical polymerization of N-tert-butylacrylamide has been investigated in methanol solution at 25°C, with the use of 4,4′-dicyano-4,4′-azodipentanoic acid as initiator. A shrinkage factor of 0.193 mmole polymerized for 1 mm contraction in a capillary of 1 mm diameter has been obtained from density measurements. In the absence of ferric chloride, rates of polymerization were found to be proportional to the concentration of monomer and to the square root of the initiator concentration. With ferric chloride present, the rate of polymerization becomes directly proportional to the initiator concentration and inversely proportional to the concentration of ferric salt. From measurements of the rates of production of ferrous iron, the specific rate constant of the initiation reaction has been found to be (1.8 ± 0.4) × 10^?6sec^?1 at 25°C, compared with a value of 7.63 × 10^?8 sec^?1 calculated from the kinetic data obtained with no ferric salt present. The value of the ratio k_p/k₄. where k_p is the propagation coefficient and k₄ is the velocity coefficient for termination by ferric chloride, has been calculated to be 6.0 × 10^?4 at 25°C, which is considerably smaller than the value found for the ferric chloride-terminated polymerization of acrylamide in water. This markedly lower value of k_p/k₄ has been attributed principally to the steric effect of the tert-butyl group on the magnitude of k_p.     

Cationic polymerization with p-substituted benzyl p-hydroxyphenyl methyl sulfonium salts: Effect of substituents and mechanistic aspects of initiation reaction

Various p-substituted benzyl p-hydroxyphenyl methyl sulfonium salts ( 2 ) were synthesized and their initiator activities were evaluated in bulk polymerization of glycidyl phenyl ether (PGE). The order of the activity was found to be 2b (X = CH₃) > 2a (X = H) ≈ 2c (X = Cl) > 2d (X = NO₂), indicating that the introduction of an electron-donating group enhanced the activity. In Hammett's plots, the logarithm of the ratio of the polymerization rates (log k_x/k_H) was correlated with σ⁺_ρ better than with σ_p and a negative ρ⁺ value (-1.18) was obtained. Reaction of 2a with benzyl mercaptan mainly gave dibenzyl sulfide and p-hydroxyphenyl methyl sulfide. The obtained results seemed to demonstrate that the OH group of the aryl group yielded no proton as initiator for the polymerization, whereas the benzyl group caused the polymerization, which was initiated by the corresponding benzyl cation formed by C? S bond cleavage. © 1993 John Wiley & Sons, Inc.     

[Hydroxy(tosyloxy)iodo]benzene as Thermal initiator for the Radical Polymerization of Methyl Methacrylate

Abstract

The thermal polymerization of methyl methacrylate in a solution of N,N-dimethylacetamide has been studied using [hydroxy(tosyloxy)- iodo]benzene (HTIB) as the initiator. The rate of polymerization was a direct function of the monomer and initiator concentrations. The initiator and monomer exponent values expressing this dependence were found to be 1.0 and 0.8, respectively. The overall activation energy of polymerization was estimated to be 45 kJ·mol^?-1. The polymerization was inhibited in the presence of hydroquinone. The effect of various solvents on the polymerization rate was studied. The polymer prepared with HTIB (0.47 × 10^?3 mol·L^?-1) had a number-average molecular weight of 138,000 and a glass transition temperature of 106°C. The polymer showed good thermal stability as determined by thermogravimetric analysis.     

Determination of Kinetic Parameters of Ethyl Methacrylate Polymerization Initiated by the Redox Pair SO2-tert-Butyl Hydroperoxide

Abstract

In the bulk polymerization of ethyl methacrylate with the redox initiator pair sulfur dioxide-tert-butyl hydroperoxide (SO₂-TBHP), the kinetic parameters were determined by the dead-end polymerization technique using the dilatometric method. Polymerization was conducted with various initiator pair compositions in the temperature interval of 12–35°C. An activation energy of 14.1 kJ/mol for [SO₂]/[TBHP] = 0.44 was determined for this temperature range. The values of k ² _p/k _t obtained in this study were in the interval 1.34 × 10^?4 to 1.11 × 10^?3 L/mol·s. The f/k _d ratios for the redox pair at different temperatures and for different initiator ratios were also calculated. The f/k _d ratios of the initiator pair changed between 15.1 and 187.6 seconds. The wide variations in these kinetic parameters were explained on the basis of competitive reactions between the redox pair and their reaction products.     

Non-ideality in vinyl polymerization—IV. Kinetics of polymerization of vinyl acetate in benzene initiated by azo-bis isobutyronitrile (AIBN)

Vinyl acetate was polymerized in bulk and in benzene at 50°C using a wide range of concentrations of azobisisobutyronitrile. Values of f_k (the efficiency of initiator) and k_prt/k_ik_p (the characteristic constant of primary radical termination) were found to be 0.53 and 2.00 × 10⁴ respectively from data for bulk polymerization. In solution polymerization, the initiator exponent is a function of initiator concentration ranging from 0.35 at high concentration to- about 0.65 at low concentration. This result has been explained on the basis of degradative chain transfer to solvent and primary radical termination. The results have been treated according to mathematical formulations already developed; the characteristic constant of degradative chain transfer and the transfer constant of the solvent have been determined. The results have been compared with literature values and discrepancies explained.     

Kinetics of the Copolymerization of Methyl Vinyl Ketone and Acrylamide Initiated by the Adduct of Methyl Vinyl Ketone and Imidazole

N-(Butyl-3-one)imidazole acts as an initiating adduct which is formed in the anionic polymerization of methyl vinyl ketone (MVK) induced by imidazole (Im) and is directly formed from Im and the MVK monomer. The kinetics of the anionic homopolymerization of MVK and acrylamide (AAm) under argon in the presence of the adduct were investigated in tetrahydrofuran (THF). The rate of polymerization for the MVK system is expressed as R_p = k[Adduct] [MVK], where k = 3.1 × 10^?6 L/(mol·s)in THF at 30°C. The overall activation energy, E_a , was found to be 5.34 kcal/mol. The R_p for the AAm system is expressed as R_p = k[Adduct] [AAm], where k = 6.8 × 10^?6 L/(mol·s) in THF at 30°C, with E_a 7.78 kcal/mol. The mechanism of the polymerization induced by the initiator adduct is discussed on the basis of these results.     

Radical and cationic polymerizations of 3‐ethyl‐3‐methacryloyloxymethyloxetane

3‐Ethyl‐3‐methacryloyloxymethyloxetane (EMO) was easily polymerized by dimethyl 2,2′‐azobisisobutyrate (MAIB) as the radical initiator through the opening of the vinyl group. The initial polymerization rate (R_p) at 50 °C in benzene was given by R_p = k[MAIB]^0.55 [EMO]^1.2. The overall activation energy of the polymerization was estimated to be 87 kJ/mol. The number‐average molecular weight (M?_n) of the resulting poly(EMO)s was in the range of 1–3.3 × 10⁵. The polymerization system was found to involve electron spin resonance (ESR) observable propagating poly(EMO) radicals under practical polymerization conditions. ESR‐determined rate constants of propagation (k_p) and termination (k_t) at 60 °C are 120 and 2.41 × 10⁵ L/mol s, respectively—much lower than those of the usual methacrylate esters such as methyl methacrylate and glycidyl methacrylate. The radical copolymerization of EMO (M₁) with styrene (M₂) at 60 °C gave the following copolymerization parameters: r₁ = 0.53, r₂ = 0.43, Q₁ = 0.87, and e₁ = +0.42. EMO was also observed to be polymerized by BF₃OEt₂ as the cationic initiator through the opening of the oxetane ring. The M?_n of the resulting polymer was in the range of 650–3100. The cationic polymerization of radically formed poly(EMO) provided a crosslinked polymer showing distinguishably different thermal behaviors from those of the radical and cationic poly(EMO)s. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1269–1279, 2001