13C nuclear magnetic resonance spectra of polyacrylates and their model compounds

¹³C nuclear magnetic resonance spectra (¹³C-NMR) of poly(methyl acrylates) and poly(isopropyl acrylates) of various tacticities were measured at 25.1 MHz and analyzed. ¹³C-NMR spectra of model compounds for poly(methyl acrylate), poly(acrylic acid), and poly(sodium acrylate) were also determined. The spectra of the polymers were generally complicated owing to the splittings corresponding to triad, tetrad, or pentad placements, and the assignment for each peak was difficult. Groups of peaks were analyzed by triad or tetrad placements by assuming Bernoullian or first-order Markovian statistics.     

Poly(alkyl α-chloroacrylates). V. Preparation and properties of methyl,ethyl, and isopropyl polymers of varied tacticity

Polymers of different tacticities, from highly isotactic to highly syndiotactic, were prepared from methyl, ethyl, and isopropyl α-chloroacrylates. These polymers were characterized for tacticity by infrared spectroscopy and 100 and 300 MHz nuclear magnetic resonance (NMR) and for thermal properties by differential scanning calorimetry (DSC). After corrections were made for molecular weight effects, the observed glass temperature-tacticity results were analyzed, and it was determined that the maximum differences in glass temperatures of the purely isotactic compared to the purely syndiotactic polymers should be 92°C for the methyl ester, 86°C for the ethyl ester, and 68°C for the isopropyl ester polymers. The highly isotactic polymers of all three esters were crystalline. Possible polymerization reaction mechanisms are discussed on the basis of the triad and tetrad tacticity values observed and the calculated propagation statistics.     

Poly(alkyl α-bromoacrylate)s. III. Tacticity analysis from 19 mHz 13C-NMR spectroscopy

Polymer tacticity was determined by 19 mHz ¹³C-NMR spectroscopy for isotactic, atactic, and syndiotactic samples of six poly(alkyl α-bromoacrylate)s. Included in this series were the methyl, ethyl, n-propyl, i-propyl, n-butyl, and n-pentyl esters. Complete assignments for the 10 pentad peaks of the carbonyl carbon resonance were achieved for all but the i-propyl ester while a complete analysis of tetrad tacticity from the backbone methylene carbon resonance was possible for all but the methyl ester. The tetrad values calculated from the experimentally determined pentad contents were found to agree with the experimental tetrad values. As a result of insufficient peak separation of the quaternary carbon resonance, complete pentad assignments were possible in only a few instances. The polymerization reaction mechanisms were discussed in terms of the propagation statistics calculated from the experimentally determined tetrads and pentads. Both the atactic and syndiotactic polymers that were synthesized by free radical techniques displayed Bernoullian or random statistics while the stereochemical statistics of the isotactic polymers synthesized by a modified Grignard complex were more consistent with nonrandom or first-order Markovian statistics.     

Stereoregularity of poly(α-methylvinyl alkyl ether)s determined by 1H- and 13C-NMR spectroscopy

α-Methylvinyl methyl ether, ethyl ether, and isobutyl ether were polymerized under various polymerization conditions and the structure of the polymers was determined by ¹H- and ¹³C-NMR spectroscopy. α-Methyl and β-methylene carbon spectra of poly(α-methylvinyl isobutyl ether) showed splitting and were analyzed by triad and tetrad sequences. β-Methylene carbon spectra of poly(α-methylvinyl ethyl ether) also showed splitting. When Eu(fod)₃ was added, α-methyl and methoxy proton spectra in benzene of poly(α-methylvinyl methyl ether) showed splitting assigned to triad tacticities. All the polymers obtained in polar solvents exhibited an increase in syndiotacticity. The polymerization mechanism is discussed.     

13C nuclear magnetic resonance studies on the stereochemical configurations of 2,4-dimethoxypentane and poly(alkyl vinyl ethers)

¹³C nuclear magnetic resonance (CMR) spectra were obtained for 2,4-dimethoxypentane, which is a model compound of poly(methyl vinyl ether), and the effects of the solvent and temperature on the chemical shifts were investigated. CMR spectra of poly-(alkyl vinyl ethers) were also determined and analyzed. The diad tacticities were obtained from β-methylene carbon resonances of poly(methyl vinyl ether), poly(ethyl vinyl ether), and poly(isobutyl vinyl ether), but not from those of poly(isopropyl vinyl ether) and poly(tert-butyl vinyl ether). The methoxyl carbon resonance of poly(methyl vinyl ether) and the ethoxyl methylene carbon resonance of poly(ethyl vinyl ether) showed splittings corresponding to pentad and triad sequences, respectively. The α-methine and quaternary carbon resonances of poly(tert-butyl vinyl ether) showed splittings corresponding to pentad and triad sequences, respectively.     

Stereoregularity of radically polymerized poly(alkyl acrylates) and poly(trimethylsilyl acrylates) and the preparation of syndiotactic poly(methyl acrylate)

Nuclear magnetic resonance (NMR) spectroscopy was used to determine the stereoregularity of radically polymerized poly(ethyl acrylates), poly(trimethylsilyl acrylates), and poly(isopropyl acrylate-α,β-d₂). The ethyl acrylate polymers consisted of a random configuration having about 50% of isotactic diads, and their stereoregularities were independent of the polymerization temperature (40 to ?78°C). Poly(trimethylsilyl acrylates) and poly(isopropyl acrylate-α,β-d₂) prepared at low temperatures had a syndiotactic configuration. Syndiotactic poly(methyl acrylate) was derived from syndiotactic poly(trimethylsilyl acrylate). For poly(methyl acrylate), an approximate estimation of the stereoregularity by infrared spectroscopy was proposed.     

Determination of absolute rate constants for free radical polymerization of ethyl α-fluoroacrylate and characterization of the polymer

The absolute rate constants for propagation (k_p) and for termination (k_t) of ethyl α-fluoroacrylate (EFA) were determined by means of the rotating sector method; k_p = 1120 and k_t = 4.8 × 10⁸ L/mol.s at 30°C. The monomer reactivity ratios for the copolymerizations with various monomers were obtained. By combining the k_p values for EFA from the present study and those for common monomers with the monomer reactivity ratios, the absolute values of the rate constants for cross-propagations were also evaluated. Reactivities of EFA and poly(EFA) radical, being compared with those of methyl acrylate and its polymer radical, were found to be little affected by the α-fluoro substitution. Poly(EFA) prepared with the radical initiator was characterized by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Although the glass transition temperature obtained by DSC for poly(EFA) resembled that of poly(ethyl α-chloroacrylate), its TGA thermogram showed fast chain de polymerization to EFA that was distinct from complicated degradation of poly(ethyl α-chloroacrylate).     

Post-lactonization of vinyl polymers containing pendent ester and hydroxymethyl groups

Copolymers of methyl methacrylate with methyl and ethyl α-hydroxymethylacrylate and with α-hydroxymethylstyrene have been prepared with free-radical initiators at temperatures below 80°C. At higher reaction temperatures or under extrusion conditions, alcohol was eliminated and the free hydroxyl content was greatly decreased. All evidence indicates the formation of six-membered lactone groups in this post-polymerization reaction: direct evidence for their formation is lacking, however, since neither infrared nor nuclear magnetic resonance spectra could be used to detect lactonization in this system. The loss of activity from ¹⁴C ester-labeled methyl methacrylate copolymer on heating could be correlated with the extent of lactonization. The degree of lactonization is relatively less with copolymers containing higher amounts of hydroxymethyl groups. The resulting polymers exhibit higher heat distortion temperatures and decreased impact resistance when compared to poly(methyl methacrylate). Attempts were made to incorporate similar lactone structures by cyclocopolymerization with methyl methacrylate of α-methacryloxymethylstyrene or ethyl α-methacryloxymethylacrylate, but only crosslinked polymers or polymers with pendent unsaturation were found.     

Thermal Degradation Behavior of Vinyl Ketone Polymers and Copolymers with Styrene

Thermal degradation behavior of six alkyl vinyl ketone (RVK) polymers and copolymers with styrene was investigated by means of infrared spectrometry (IR), thermogravimetry (TG), derivative TG (DTG), and differential scanning calorimetry (DSC). The observed TG curves of the RVK polymers changed with both structure of their substituents and initiators used, and the temperature of the beginning of weight loss for the radical polymers increased in the order: poly(methyl isopro-penyl ketone) < poly(methyl vinyl ketone) < poly(ethyl vinyl ketone) < poly(isopropyl vinyl ketone) < poly(tert-butyl vinyl ketone). From the infrared spectral determination of thermally degraded polymers, the formation of a cyclized structure was observed. It was also found from the results of thermal degradation of the RVK copolymers with styrene at 210° C that the formation of such a cyclized unit tended to increase in the order: tert-butyl vinyl ketone < isopropyl vinyl ketone < ethyl vinyl ketone < methyl vinyl ketone.     

Stereoregularity of poly(methyl α-chloroacrylate)

Triad and tetrad tacticities of poly(methyl α-chloroacrylate) and poly(methyl α-chloroacrylate-β-d₁) were determined by nuclear magnetic resonance (NMR) spectroscopy. Methyl α-chloroacrylate-β-d₁ and its polymer were first synthesized. Isotactic poly(methyl α-chloroacrylate) was prepared with ethylmagnesium chloride-benzal-acetophenone in combination as catalyst. The syndiotacticity of radically polymerized polymers increased with decreasing polymerization temperature. For radical polymerization, enthalpy and entropy differences between isotactic and syndiotactic additions were calculated to give ΔH ? ΔH = 850 cal/mole and ΔS ? ΔS = 0.93 eu. The stereoregularity of the polymer prepared with phenylmagnesium bromide catalyst was analyzed in fairly good agreement with first-order Markov statistics, while polymerization with fluorenyllithium seems predominantly to proceed by a mechanism similar to free-radical mechanism. Stereoregularity-controlling power for individual substituents is briefly discussed.     

Stereoregularity of poly(isopropyl acrylate) and its racemization during hydrolysis

The diad tacticity of poly(isopropyl acrylate) was measured from the β-proton absorptions of poly(isopropyl acrylate-α,β-d₂) obtained with a 100 MHz NMR spectrometer, and temperature dependence of the tacticity of the polymers obtained by radical polymerization was determined. Enthalpy and entropy differences between isotactic and syndiotactic addition for poly(isopropyl acrylate) were calculated to give the following values: Δ(ΔS) = 0.7 eu; Δ(ΔH) = 0.51 kcal/mole. In the hydrolysis of poly(isopropyl acrylate-α,β-d₂), it was found that the rate of hydrolysis of poly(isopropyl acrylate) was dependent on the molecular weight rather than on the tacticity. As for the rate of racemization during hydrolysis, the rate for syndiotactic polymer was much faster than that for the isotactic polymer. The exchange reaction of deuterium at α-position with hydrogen occurred in all the polymers during hydrolysis reaction.     

Stereoregularity of poly(alkyl α-chloroacrylates) and mechanism of isotactic polymerization

The catalytic activity of the complexes prepared by the reaction of Grignard reagents with ketones, esters, and an epoxide as polymerization catalysts of methyl and ethyl α-chloroacrylates was investigated. The modifiers which gave isotactic polymers were α,β-unsaturated ketones such as benzalacetophenone, benzalacetone, dibenzalacetone, mesityl oxide, and methyl vinyl ketone, and α,β-unsaturated esters such as ethyl cinnamate, ethyl crotonate, and methyl acrylate. Catalysts with butyl ethyl ketone, propiophenone, and propylene oxide as modifiers produced atactic polymers but no isotactic polymers. It was revealed that the complex catalysts having a structure ? C?C? O? MgX (X is halogen) gave isotactic polymers. The mechanism of isotactic polymerization was discussed. In addition, for radical polymerization of ethyl α-chloroacrylate, enthalpy and entropy differences between isotactic and syndiotactic additions were calculated to give ΔH_i^* ? ΔH_s^* = 910 cal/mole and ΔS_i^* ? ΔS_s^* = 0.82 eu.     

Radical polymerization of various alkyl methacrylates in liquid crystalline solvents

The polymerization of methacrylates of methyl, ethyl, butyl, hexyl, octyl, dodecyl, and octadecyl alcohols was studied with 2,2′-azobisisobutyronitrile in the smectic, nematic, cholesteric, and isotropic liquid phases at 50–75°C. N-(4-Methoxyphenylmethylene)phenylamine, N-(4-ethoxyphenyl-methylene)-4-butylphenylamine, cholesteryl octadecanoate, and benzene were used as the solvents. The viscosities of the polymers were enhanced in the mesomorphic solvents. The polymer was converted to the corresponding poly(methyl methacrylate) through hydrolysis and esterification. Tacticities of the resultant poly(methyl methacrylates) were determined by nuclear magnetic resonance spectroscopy. The isotacticities of the polymers obtained in the smectic and the nematic phases were basically the same and appeared to be larger than those of the polymers in the cholesteric and isotropic liquid states. The polymerization of the methacrylates of butyl and longer-chain alcohols deviated from Bernoullian statistics and gave polymers more isotactic than those of methyl and ethyl methacrylates.     

Determination of the Microstructure of Some Methyl Methacrylate-Butadiene Copolymers by 220 MHz Proton Magnetic Resonance Spectroscopy

Abstract

Proton magnetic resonance (PMR) spectroscopy at 220 MHz has been used to gain information about the relative proportions of various methyl methacrylate centered triads and pentads in some methyl methacrylate (MMA)-butadiene (BU) copolymers prepared with a free-radical catalyst. The PMR peaks used are the MMA α-methyl peaks recorded using CDCL₃ as solvent, and the MMA α methyl peaks recorded using C₅D₅N as solvent. Measured triad and pentad fractions are in good agreement with those calculated from the reactivity ratios r₁ = 0.17 and r₂ = 0.60, where MMA = Monomer 1. Surprisingly, the α-methyl peaks provide information also about the ratio of cis-1,4- to trans-1, 4-butadiene units in the copolymer. Proportions of 1,2-butadiene units are obtained from the relative areas of peaks due to vinyl and vinylene protons.     

Graft polymers from poly(vinyl chloride) and chlorinated rubber

Graft polymers from poly(vinyl chloride) (PVC) and chlorinated rubber (CIR) with side chains of poly(methyl methacrylate) (PMMA), poly(methyl acrylate) (PMA), or poly(ethyl methacrylate) (PEMA) were synthesized. For this purpose, a vinyl monomer was polymerized in the presence of small quantities of PVC or CIR with benzoyl peroxide as catalyst. The graft polymers were separated from both homopolymers by precipitation with methanol from methyl ethyl ketone solutions of the reaction products and the grafting efficiency was calculated. The graft polymers were characterized by infrared spectra, elemental analysis, NMR, and osmometric or light-scattering determinations. From the results it is concluded that the PVC or CIR molecules contain side chains of PMMA, PMA, or PEMA. The graft polymers showed higher molecular weights, and the values of second virial coefficient for these polymers were much different from those of the starting polymers.     

Synthesis and radiation degradation of vinyl polymers with fluorine: Search for improved lithographic resists

Homopolymers of methyl α-fluoroacrylate (MFA), trifluoroethyl methacrylate (TFEM), and hexafluoroisopropyl methacrylate (HFIM) were prepared, as were their methyl methacrylate (MMA) copolymers. Copolymers of vinylidene fluoride (VDF) and chlorotrifluoroethylene (CTFE) with MMA were also prepared. The radiation susceptibilities of these polymers were measured by the ⁶⁰Co γ-irradiation method, in which molecular weights were measured by membrane osmometry and gel permeation chromatography (GPC). All the copolymers degraded by predominant chain scission except poly(methyl α-fluoroacrylate), (PMFA), which crosslinks even at low doses (ca. 1 Mrad). The G_s - G_x and G_s values of the chain scissioning polymers and copolymers are higher than those of poly(methyl methacrylate) PMMA reference. The high susceptibility of PMFA homopolymer to crosslinking is in contrast to that of poly(methyl α-chloroacrylate), as we reported earlier. This effect is interpreted as resulting from extensive hydrogen fluoride and polyenlyl radical formation, which leads to facile crosslinking. However, incorporation of the MFA monomer unit causes the (22/78) MFA/MMA copolymer to degrade with a larger value of G_s that PMMA. Apparently a second-order process leads to crosslinking in PMFA and this is retarded in the copolymer. In the hehomopolymers of HFIM and TFEM and in the HFIM-MMA and TFEM-MMA copolymers the HFIM and TFEM components facilitate degradation with negligible crosslinking. The increased degradation susceptibility of VDF and CTFE copolymers with MMA over that of PMMA is attributed to processes at the VDF or CTFE components present in smaller concentrations (3-5 mole %) than the threshold levels (25-50% necessary for significant crosslinking).     

Resist polymers: Part IX—Thermolysis of chlorine-containing acrylate polymers

The thermal degradation of poly(chloroethyl methacrylate) (PCEMA), poly(trichloroethyl methacrylate) (PTCEMA), poly(methyl-α-chloroacrylate) (PMCA) and their copolymers with methyl methacrylate (MMA) has been investigated. Both ester decomposition and main chain scission occur for the chloroalkyl methacrylate polymers with the former playing the dominant role. In contradistinction, HCl elimination and aromatization prevail over other processes for PMCA. The thermolysis results are compared with radiolysis results.     

Polymer NSR spectroscopy. II. The high resolution spectra of methyl methacrylate polymers prepared with free radical and anionic initiators

Spectra of methyl methacrylate polymers in chlorofornm solution at 90° show three α-methyl proton peaks. Measurements of their areas in spectra of polymers prepared with free radical and anionic initiators indicate that these may be attributed to (1) iso- tactic sequences (ddd or lll), (2) syndiotactic sequences (ldl or dld), and (3) heterotactic sequences (ldd, dll, ddl, or lld). The conformation and stereochemical configuration of the chains may thus be examined with considerable discrimination; degrees of regularity. block sizes, etc. appear to be determinable. Free radical polymers of methyl methacrylate are found to be predominantly syndiotactic, whereas those produced with anionic initiators. such as n-butyllithium, are shown to be predominantly isotactic, in agreement with the findings of others. The backbone methylene resonance also shows striking changes with chain stereochemical configuration, such as to provide absolute, independent confirmation of the assigned structures.     

General properties of secondary relaxations in polymers as determined by the thermally stimulated current method

The method of thermally stimulated current (TSC) has been used to study the low-temperature dielectric β relaxations of several polymers including especially poly(vinyl chloride), poly(vinyl acetate), polyamide 6, 6,6,poly(t-butyl acrylate), poly(methyl methacrylate), poly(ethyl methacrylate), poly(phenyl methacrylate), and poly(t-butyl methacrylate). The distribution characteristics of the relaxation processes have been determined from the corresponding TSC peaks by a fractional polarization technique which consists of applying the electric field in several discrete steps during a slow cooling. Several common features have been found in all the polymers investigated: the β peaks are characterized by a distribution of relaxation times resulting from a distribution in activation energy and this distribution is quasisymmetrical and continuous. These facts are in agreement with the hypothesis of a relaxation involving local motions of small polar groups undergoing various interactions with the environment. Some discrepancy remains, however, between our calculated values of the mean activation energy and those obtained from the dielectric loss.     

Chlorine distribution and structure–property relationship of chlorinated polypropylene

High-resolution proton magnetic resonance (PMR) spectroscopy was used to determine the chlorine distribution of chlorinated polypropylenes in 1,1,2,2,-tetrachloroethane solution and suspension (5–25 wt % chlorine). The determination is based on measuring the relative amounts of methyl and methylene groups which are α, β, and γ to chlorinecontaining groups in chlorinated polypropylenes. The results obtained from the 100 MHz and 220 MHz PMR spectrometers were compared with the theoretical predictions provided by Frendsdorff and Ekiner, based on the statistics of substitution polymers. Furthermore, the PMR data were correlated with infrared and differential scanning calorimetry data to obtain the structural and crystalline properties. The comparison showed that the suspension-chlorinated polypropylenes show structure heterogeneity and thermal instability, whereas polymers chlorinated in solution with gaseous chlorine show a random chlorine distribution and thermal stability compared with the former.