Syntheses and reactions of functional polymers. XLII. Preparation and use of polymers having N-hydroxy-succinimide unit in the chain

Styrene-maleic anhydride alternating copolymer was converted to N-hydroxymaleimide-styrene copolymer by reaction with hydroxylamine in pyridine at room temperature. The conversion was more than 90%. From this copolymer, N-acetoxy- or N-benzoyloxymaleimide-styrene copolymers were derived by action of acetic anhydride or benzoyl chloride in dimethylformamide at room temperature. Acylation of several primary amines was carried out effectively by use of these N-acyloxyimide-styrene copolymers. The reaction of the acetylated copolymer with diethylamine at room temperature afforded N-hydroxyimide copolymer.     

Synthesis of polyamides from active N,N′-diacylbis-2-benzothiazolones and diamines under mild conditions

The aminolysis of N-benzoyl-2-benzothiazolone was studied in model systems and was found to give excellent yields of N-substituted benzamides at room temperature. Solution polycondensation of new bisamides, N,N′-adipoylbis-2-benzothiazolone and N,N′-isophthaloylbis-2-benzothiazolone, proceeded fairly slowly with both aromatic and aliphatic diamines at room temperature to yield polyamides having inherent viscosities up to 1.5. Hexamethylphosphoramide was the best polycondensation medium among some polar aprotic solvents for the formation of high molecular weight polyamides. The high reactivity of the N-acyl-2-benzothiazolones was discussed in relation to excellent leaving nature and intramolecular general base catalysis of the benzothiazolone moiety.     

Synthesis of polyacylsulfonamide-amides by ring-opening polyaddition of N,N′-arylenedisulfonylbissuccinimides with diamines

Ring-opening polyaddition of N,N′-arylenedisulfonylbissuccinimides with both aliphatic and aromatic diamines in N-methyl-2-pyrrolidone at room temperature afforded polyacylsulfonamide-amides having inherent viscosities in the range of 0.2–0.4 in excellent yields. The polymers revealed acidic nature and were readily soluble in both polar aprotic solvents and basic media. They melted at a temperature below 200°C and began to decompose at around 250°C in nitrogen.     

Capillary electrophoresis separation of heterocyclic nitrosoamino acid-conformers at sub-ambient temperatures

The separation of a selected group of naturally occurring, heterocyclic nitrosoamino acids was achieved by capillary zone electrophoresis and the resolution of the syn and anti conformers improved as the temperature was lowered to 5 °C. The double peaks observed for each nitrosoamino acid are probably caused by the slow kinetics of conformational isomerism. The experimental setup consisted of a P/ACE 5510 electrophoresis system, a 57 cm polyacrylamidecoated capillary, and a 10 mM phosphate buffer, pH 7.2, containing 2 mM of 3-(N-N-dimethylmyristylammonio)propanesulfonate (DMMAPS) and 0.1% Tween 20. Our study shows that (a) the lower the temperature, the greater the resolution and the longer the migration times; and (b) different nitrosoamino acid conformers were resolved at different temperatures because of differences in the rate of isomerization. For example, the conformers of N-nitrosothiazolidine-4-carboxylic acid were partially resolved at 30 °C while those of N-nitrosoproline were well resolved at the same temperature.     

Synthesis of poly(methyl methacrylate) via ARGET ATRP and study of the effect of solvents and temperatures on its polymerization kinetics

This investigation reports the synthesis of poly(methyl methacrylate) via activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and studies the effect of solvents and temperature on its polymerization kinetics. ARGET ATRP of methyl methacrylate (MMA) was carried out in different solvents and at different temperatures using CuBr₂ as catalyst in combination with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a ligand. Methyl 2‐chloro propionate was used as ATRP initiator and ascorbic acid was used as a reducing agent in the ARGET ATRP of MMA. The conversion was measured gravimetrically. The semilogarithmic plot of monomer conversion versus time was found to be linear, indicating that the polymerization follows first‐order kinetics. The linear polymerization kinetic plot also indicates the controlled nature of the polymerization. N,N‐Dimethylformamide (DMF), tetrahydrofuran (THF), toluene, and methyl ethyl ketone were used as solvents to study the effect on the polymerization kinetics. The effect of temperature on the kinetics of the polymerization was also studied at various temperatures. It has been observed that polymerization followed first‐order kinetics in every case. The rate of polymerization was found to be highest (k_app = 6.94 × 10⁻³ min⁻¹) at a fixed temperature when DMF was used as solvent. Activation energies for ARGET ATRP of MMA were also calculated using the Arrhenius equation.     

The role of chain scission in fracture of amorphous polymers

We have investigated the role of chain scission in glassy polymers by monitoring the molecular weight changes induced by microtoming thin slices of monodisperse polystyrenes. The changes in number-average molecular weight allow determination of N_f, the number of bond scissions per unit area. It is found that N_f is independent of initial molecular weight and has the value 6.50 × 10¹³ scissions/cm² at room temperature; N_f decreases with increasing temperature, suggesting that chain pullout increases with temperature. The work required to create unit surface area in polystyrene is several orders of magnitude greater than the energy required to break N_f bonds, indicating that plastic deformation plays a major role in deformation and fracture of glassy polymers.     

An Efficient One-Pot Synthesis of N-Methoxy-N-methylamides from Carboxylic Acids

Abstract

Several N-methoxy-N-methylamides were prepared by the reaction of the corresponding carboxylic acids with N,O-dimethylhydroxylamine hydrochloride at room temperature using trichloromethyl chloroformate in the presence of triethylamine in excellent yields.     

Uncatalyzed polymerization of bistriazolinediones with electron-rich aromatic compounds via electrophilic aromatic substitution

The reaction of 4-substituted-1,2,4-triazoline-3,5-diones(4R-TD's), i.e., MeTD(4-methyl substituted) and PhTD(4-Phenyl substituted) with electron rich aromatic compounds were investigated. N,N-Dimethylaniline undergoes reaction instantaneously with MeTD and PhTD. Electrophilic aromatic substitution occurred at room temperature at the para position without use of any catalyst. N,N,N′,N′-tetramethyl-m-phenylenediamine (TMPDA) undergoes reaction with 2 mol of PhTD and MeTD which lead to the formation of 2:1 adducts in high yields. These compounds were fully characterized by IR, ¹³C-NMR, ¹H-NMR and elemental analysis and were used as model compounds. The reaction of bistriazolinediones with TMPDA was performed in dimethylformamid at room temperature. The reactions are exothermic, fast, and gave novel polymer structures via electrophilic aromatic substitution. Some physical properties and structural characterization of these new polymers have been studied, and will be reported.     

Novel Soluble Polyimide Containing 4-tert-Butyltoluene Moiety: Synthesis and Characterization

Based on the synthesis of a rigid aromatic diamine, α,α‐bis(4‐aminophenyl)‐4‐(t‐butyl)toluene ( 1 ), a novel polyimide (PI) 3 was prepared from this diamine monomer and 4,4′‐oxydiphthalic dianhydride via a one‐step high‐temperature polycondensation. FT‐IR, ¹H NMR and elemental analysis were used to investigate the chemical structures of 1 and 3 . The results confirmed that they agreed with the proposed structures for both 1 and 3 completely. The obtained PI 3 showed excellent solubility in most common solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide, N,N‐dimethylformamide, chloroform, dichloromethane and tetrahydrofuran. The resulting strong and flexible film exhibited high thermal stability with the glass transition temperature at 317°C and the temperature at 10% weight loss beyond 519°C in both air and nitrogen atmospheres. Moreover, the film also showed high optical transparency, low dielectric constant (3.13 at 1 MHz), low water absorption (0.40%) and hydrophobic character.     

Synthesis,characterization, and drug release behaviors of a novel thermo‐sensitive poly(N‐acryloylglycinates)

In this study, a novel thermo‐sensitive poly(N‐acryloylglycinates) was prepared in order to get a potential drug release carrier. The corresponding monomers and the polymers were characterized with Fourier‐transform infrared (FTIR) and ¹H NMR. The thermo‐sensitivity of the poly(N‐acryloylglycinates) was evaluated by measuring their lower critical solution temperatures (LCST) in water, inorganic salt solution, and different pH solutions. The results indicated that poly(N‐acryloylglycine methyl ester) (NAGME) and poly(N‐acryloylglycine ethyl ester) (NAGEE) exhibit a reversible thermo‐sensibility in their aqueous solutions at 61.5 and 12.5°C, respectively. However, no thermo‐sensitive behavior of poly(N‐acryloylglycine propyl ester) (NAGPE) was found due to its over hydrophobicity. The swelling studies on hydrogels were carried out at different temperatures, in different pH, and inorganic salt solutions. The hydrogels showed a remarkable phase transition at about 35°C with changing temperature. The release rate of caffeine from the thermo‐sensitive hydrogel was apparently decreased as the crosslinker content increased and temperature decreased. Seventy five percent caffeine from the polymeric hydrogel with 5% NMBA (N, N‐methylenebis(acrylamide)) was released at room temperature within 240 min, whereas 95.4% caffeine diffused into the medium at 37°C. Copyright © 2009 John Wiley & Sons, Ltd.     

Anionic polymerization. VI. Effect of polar modifiers on alkylsodium and alkylpotassium polymerization of butadiene

It was found that N,N,N′,N′-tetramethylethylene diamine and hexamethyl phosphorus triamide minimize chain transfer reactions in the polymerization of 1,3-butadiene in hydrocarbon solvent with alkylsodium or alkylpotassium initiators. The polymers obtained with alkylsodium initiators had a high molecular weight and high vinyl content at 90–95% conversion. The molecular weight of the polybutadiene made by alkylsodium and alkylpotassium initiators was dependent on the polymerization temperatures and modifier ratios, but the vinyl contents were independent of the modifier ratios. Vinyl contents of alkylpotassium-initiated polymers showed a slight dependency on polymerization temperature; the vinyl contents of alkylsodium-initiated polymers were independent of temperature. Addition of lithium tert-butoxide and potassium tert-amylate to these initiators in the presence of the modifiers affected the molecular weight but not the microstructure.     

One Facile Preparation of N‐Aroyl‐N′‐arylsulfonylhydrazines by Oxidation of Aromatic Aldehyde N‐Arylsulfonylhydrazones with bis(Trifluoroacetoxy)iodobenzene

N‐aroyl‐N′‐arylsulfonylhydrazines can be obtained by oxidation of aromatic aldehyde N‐arylsulfonylhydrazones with bis(trifluoroacetoxy)iodobenzene in acetone at room temperature in mild to good yields.     

1H NMR study of cis-trans isomerization in two analogs of the thiol form of thiamine

Proton magnetic resonance (¹H NMR) was used to study cis-trans isomerization in N-methyl-N-(1-methylthio-2-propenyl)formamide and N-benzyl-N-(1-methylthio-2-propenyl)formamide, two analogs of the thiol form of thiamine. Benzene dilution studies and shift reagent studies were used to make resonance assignments, which indicate that the predominant isomer for each analog has the C? C bond trans to the carbonyl oxygen. Shift reagent studies, using Pr(fod)₃ in CCl₄ or CDCl₃, suggest that the reagent may be bonding to both the nitrogen and oxygen atoms of the substrate. For some of the systems studied, varying ρ at constant temperature had the same spectral effect as varying temperature at constant ρ.     

Ambient‐temperature copper‐catalyzed atom transfer radical polymerization of methacrylates in ethylene glycol solvents

The use of ethylene glycol solvents in the room‐temperature atom transfer radical polymerization (ATRP) of various hydrophobic and hydrophilic methacrylates is demonstrated. Unlike many of the very polar solvents described in the literature for room‐temperature ATRP, these solvents have good solvency for a wide range of polymers and monomers and are cheap and relatively nontoxic. Ethylene glycols with one hydroxyl and one methoxy group, such as tri(ethylene glycol) monomethyl ether (TEGMME), provide optimal results. The polymerization of methyl methacrylate in TEGMME with CuBr/N,N,N′N′,N″‐pentamethyldiethylenetriamine as the catalyst requires the addition of CuCl₂ at the beginning of the reaction to produce well‐controlled polymerizations. This leads to polymers with predictable molecular weights and relatively narrow polydispersities. Polymerization in solvents that are fully methoxy‐capped terminate prematurely because of catalyst precipitation. The electrochemical behavior of copper complexes in selected solvents is examined to determine why these solvents provide good rates at room temperature. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1588–1598, 2005     

Alkylations of N4‐(4‐Pyridyl)‐3,5‐di(2‐pyridyl)‐1,2,4‐triazole: First Observation of Room‐Temperature Rearrangement of an N4‐Substituted Triazole to the N1 Analogue

Attempts to use alkylation to introduce a positive charge at the nitrogen atom of the 4‐pyridyl ring in the bis(bidentate) triazole ligand N⁴‐(4‐pyridyl)‐3,5‐di(2‐pyridyl)‐1,2,4‐triazole ( pydpt ) were made to ascertain what effect a strongly electron‐withdrawing group would have on the magnetic properties of any subsequent iron(II) complexes. Alkylation of pydpt under relatively mild conditions led in some cases to unexpected rearrangement products. Specifically, when benzyl bromide is used as the alkylating agent, and the reaction is carried out in refluxing acetonitrile, the N⁴ substituent moves to the N¹ position. However, when the same reaction is performed in dichloromethane at room temperature, the rearrangement does not occur and the desired product containing an alkylated N⁴ substituent is obtained. Heating a pure sample of N⁴‐Bzpydpt?Br to reflux in MeCN resulted in clean conversion to N1Bzpydpt.Br . This is consistent with N4‐Bzpydpt.Br being the kinetic product whereas N1Bzpydpt.Br is the thermodynamic product. When methyl iodide is used as the alkylating agent, the N⁴ to N¹ rearrangement occurs even at room temperature, and at reflux pydpt is doubly alkylated. The observation of the lowest reported temperatures for an N⁴ to N¹ rearrangement is due to this particular rearrangement involving nucleophilic aromatic substitution: a possible mechanism for this transformation is suggested.     

Thermoresponsive diblock copolymer micellar macro‐RAFT agent‐mediated dispersion RAFT polymerization and synthesis of temperature‐sensitive ABC triblock copolymer nanoparticles

The micellar macro‐RAFT agent‐mediated dispersion polymerization of styrene in the methanol/water mixture is performed and synthesis of temperature‐sensitive ABC triblock copolymer nanoparticles is investigated. The thermoresponsive diblock copolymer of poly(N,N‐dimethylacrylamide)‐block‐poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine] trithiocarbonate forms micelles in the polymerization solvent at the polymerization temperature and, therefore, the dispersion RAFT polymerization undergoes as similarly as seeded dispersion polymerization with accelerated polymerization rate. With the progress of the RAFT polymerization, the molecular weight of the synthesized triblock copolymer of poly(N,N‐dimethylacrylamide)‐block‐poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine]‐b‐polystyrene linearly increases with the monomer conversion, and the PDI values of the triblock copolymers are below 1.2. The dispersion RAFT polymerization affords the in situ synthesis of the triblock copolymer nanoparticles, and the mean diameter of the triblock copolymer nanoparticles increases with the polymerization degree of the polystyrene block. The triblock copolymer nanoparticles contain a central thermoresponsive poly [N‐(4‐vinylbenzyl)‐N,N‐diethylamine] block, and the soluble‐to‐insoluble ‐‐transition temperature is dependent on the methanol content in the methanol/water mixture. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2155–2165     

A study concerning the synthesis,basicity and hydrolysis of 4‐amino‐2‐(N,N‐diethylamino)quinazoline derivatives

A group of 2‐(N,N‐diethylamino)‐4‐aminoquinazoline derivatives have been synthesized in the reaction of N¹,N¹‐diethyl‐N²‐arylchlorocarboxyamidines with cyanamide in the presence of T1Cl₄ as a catalyst. Such quinazolines decompose into the corresponding quinazolones in dilute aqueous HC1 solutions at higher temperature. Hydrolysis rates of 2‐(N,N‐diethylamino)‐4‐aminoquinazoline and 2‐(N,N‐diethylamino)‐4‐(N,N‐dimethylamino)‐quinazoline have been determined to observe the influence of substituents at the 4‐amino group upon the hydrolysis. pK_a values have been also determined for these compounds and analyzed in conjunction with the Hammett σ constants.     

The rapid and efficient synthesis of disulfides from alkyl and acyl halides

Various symmetrical dialkyl and diacyl disulfides are prepared easily in high yields from the corresponding alkyl and acyl halides under mild and nonaqueous conditions using N,N′-dibutyl-N,N,N′,N′-tetramethyl-ethylenediammonium tetrahydroborate (BTMETB) or N,N′-dibenzyl-N,N,N′,N′-tetramethylethylenediammonium tetrahydroborate (BZTMETB) and elemental sulfur. The quaternary diammonium borohydrides were easily prepared by treatment of the corresponding quaternary diammonium chloride or bromide with alkaline solution of sodium borohydride at room temperature.     

Synthesis of 6-cyanopurines and the isolation and X-ray structure of novel 2H-pyrroles

(Z)-N¹-(2-Amino-1,2-dicyanovinyl)-N²-substituted-formainidines react with dimethylformamide diethyl acetal at room temperature to give 6-cyanopurines as the major product together with novel 5-amino-2-arylimino-3,4-di[(N,N-dimethylamino)methylideneamino]-2H-pyrroles, which have been fully characterised and a single crystal X-ray analysis has been carried out on the N-phenyl derivative.     

Acid‐Promoted Chemoselective Introduction of Amide Functionality onto Aromatic Compounds Mediated by an Isocyanate Cation Generated from Carbamate

Carbamates have been used as precursors of isocyanates, but heating in the presence of strong acids is required because cleavage of the C? O bond in carbamates is energy‐demanding even in acid media. Direct amidation of aromatic compounds by isocyanate cations generated at room temperature from carbamoyl salicylates in trifluoromethanesulfonic acid (TfOH) was examined. Carbamates with ortho‐salicylate as an ether group (carbamoyl salicylates) showed dramatically accelerated O? C bond dissociation in TfOH, which resulted in facile generation of the isocyanate cation. These chemoselective intermolecular aromatic amidation reactions proceeded even at room temperature and showed good compatibility with other electrophilic functionalities and high discrimination between N‐monosubstituted carbamate and N,N‐disubstituted carbamate. The reaction rates of secondary and tertiary amide formation were markedly different, and this difference was utilized to achieve successive (tandem) amidation reactions of molecules with an N‐monosubstituted carbamate and an N,N‐disubstituted carbamate with two kinds of aromatic compounds.