Optimization of silicon dioxide surface functionalization protocol for designing the receptor layer of a biosensor for detecting explosives

The development of the receptor layer of the biosensor for detecting explosive compounds is described. The covalent modification has been chosen for immobilizing E. coli nitroreductase on the gate oxide of the ion-sensitive field effect transistor (ISFET) that is comprised of silicon dioxide. The self-assembled monolayer technique has been used for immobilization. This method assumes the usage of different silanes and spacer molecules for activating the surface of SiO₂. Two different immobilization strategies have been compared, one using asymmetric spacers (3-maleimidobenzoic acid N-hydroxysuccinimide ester (MBS) and 4-(4-maleimidophenyl)butyric acid N-hydroxysuccinimide ester (SMPB)) and another using a symmetric glutaric dialdehyde linker both accompanied by appropriate silanes. For the first method, the dependence of functionalization efficiency on silane concentration has been studied. The sufficient density of enzyme molecules on the surface of SiO₂ has been achieved at a concentration of silane of 0.0015%. The type of asymmetric linker has no influence on immobilization efficiency. The method implying glutaric dialdehyde results in higher activity of the immobilized enzyme. For this method, the immobilization procedure has been optimized. The method has been adapted for immobilization of E. coli nitroreductase inside the channel of a microfluidic system on the surface of ISFET. For this purpose, (3-aminopropyl)triethoxysilane (APTES) has been changed to the corresponding silatrane, and the concentration of the enzyme has been increased to 30 μg/mL. The optimized procedure has been successfully used to develop a biosensor for detecting explosives.     

Forming Lipid Bilayer Membrane Arrays on Micropatterned Polyelectrolyte Film Surfaces

A novel method of forming lipid bilayer membrane arrays on micropatterned polyelectrolyte film surfaces is introduced. Polyelectrolyte films were fabricated by the layer‐by‐layer technique on a silicon oxide surface modified with a 3‐aminopropyltriethoxysilane (APTES) monolayer. The surface pK_a value of the APTES monolayer was determined by cyclic voltammetry to be approximately 5.61, on the basis of which a pH value of 2.0 was chosen for layer‐by‐layer assembly. Micropatterned polyelectrolyte films were obtained by deep‐UV (254 nm) photolysis though a mask. Absorbed fluorescent latex beads were used to visualize the patterned surfaces. Lipid bilayer arrays were fabricated on the micropatterned surfaces by immersing the patterned substrates into a solution containing egg phosphatidylcholine vesicles. Fluorescence recovery after photobleaching studies yielded a lateral diffusion coefficient for probe molecules of 1.31±0.17 μm² s^?1 in the bilayer region, and migration of the lipid NBD PE in bilayer lipid membrane arrays was observed in an electric field.     

Comparison of Physical Adsorption and Covalent Coupling Methods for Surface Density-Dependent Orientation of Antibody on Silicon

The orientation of antibodies, employed as capture molecules on biosensors, determines biorecognition efficiency and bioassay performance. In a previous publication we demonstrated for antibodies attached covalently to silicon that an increase in their surface amount Γ, evaluated with ellipsometry, induces changes in their orientation, which is traced directly using Time-of-Flight Secondary Ion Mass Spectroscopy combined with Principal Component Analysis. Here, we extend the above studies to antibodies adsorbed physically on a 3-aminopropyltriethoxysilane (APTES) monolayer. Antibodies physisorbed on APTES (0 ≤ Γ ≤ 3.5 mg/m²) reveal the Γ ranges for flat-on, side-on, and vertical orientation consistent with random molecular packing. The relation between orientation and Γ is juxtaposed for silicon functionalized with APTES, APTES modified with glutaraldehyde (APTES/GA) and N-hydroxysuccinimide-silane (NHS-silane). Antibody reorientation occurs at lower Γ values when physisorption (APTES) is involved rather than chemisorption (APTES/GA, NHS-silane). At high Γ values, comparable proportions of molecules adapting head-on and tail-on vertical alignment are concluded for APTES and the NHS-silane monolayer, and they are related to intermolecular dipole–dipole interactions. Intermolecular forces seem to be less decisive than covalent binding for antibodies on the APTES/GA surface, with dominant head-on orientation. Independently, the impact of glutaraldehyde activation of APTES on vertical orientation is confirmed by separate TOF-SIMS measurements.     

芘分子共价修饰的硅纳米线制备及其发光性能表征

将功能分子共价链接于硅纳米线表面,是发展硅纳米线性能,获得新的硅纳米线器件材料的重要手段.但是对硅纳米线表面的修饰却存在产生不可控制的表面氧化层的缺点,因此有必要发展一种温和的新方法.本文通过羟基(—OH)与硅纳米线表面Si—H键反应生成Si—O—C键,从而在硅纳米线表面引入功能分子.并通过芘醇分子在硅纳米线表面的固定化,证明了这一方法能够温和地实现对硅纳米线表面的共价键修饰.     

Direct Protein Detection in Solutions of High Ionic Strength using Polyethylene Glycol-modified AlGaN/GaN High Electron Mobility Transistors

Herein, we proposed a simple 3-(aminopropyl) triethoxysilane/polyethylene glycol (APTES/PEG)-AlGaN/GaN high electron mobility transistors (HEMT) biosensor that enabled direct detection in high ionic strength solutions. Unlike previous modification strategies, the PEG-modified on the GaN surface established a stable screening system by forming a porous biopolymer layer, which can overcome Debye shielding. In our work, the APTES/PEG modification enabled immunoglobulin G (IgG) to be easily detected in solutions with concentrations of up to 30 mM (3x) of phosphate buffered saline (PBS), indicating that the APTES/PEG modification strategy had the potential for direct detection of biomolecules in physiological solutions, which provided a new method for bio-surface modification on GaN and advanced the practical application of AlGaN/GaN HEMT biosensors.     

Covalent modified hydrophilic polymer brushes onto poly(dimethylsiloxane) microchannel surface for electrophoresis separation of amino acids

A new environmentally friendly method is developed for preventing nonspecific biomolecules from adsorption on poly(dimethylsiloxane) (PDMS) surface via in situ covalent modification. o-[(N-Succinimdyl)succiny]-o'-methyl-poly(ethylene glycol) (NSS-mPEG) was covalently grafted onto PDMS microchannel surface that was pretreated by air-plasma and silanized with 3-aminopropyl-triethoxysilanes (APTES). The modification processes were carried out in aqueous solution without any organic solvent. The mPEG side chains displayed extended structure and created a nonionic hydrophilic polymer brushes layer on PDMS surface, which can effectively prevent the adsorption of biomolecules. The developed method had improved reproducibility of separation and stability of electroosmotic flow (EOF), enhanced hydrophilicity of surface and peak resolution, and decreased adsorption of biomolecules. EOF in the modified microchannel was strongly suppressed, compared with those in the native and silanized PDMS microchips. Seven amino acids have been efficiently separated and successfully detected on the coated PDMS microchip coupled with end-channel amperometric detection. Relative standard deviations (RSDs) of their migration time for run-to-run, day-to-day and chip-to-chip, were all below 2.3%. Moreover, the covalent-modified PDMS channels displayed long-term stability for 4 weeks. This novel coating strategy showed promising application in biomolecules separation.     

In vitro haemocompatibility and stability of two types of heparin-immobilized silicon surfaces

Heparin was covalently immobilized onto a silicon surface by two different methods, carbodiimide-based immobilization and photo-immobilization. In the former method, a (3-aminopropyl) trimethoxysilane (APTMS) self-assembled monolayer (SAM) or multilayer was first coated onto the silicon surface as the bridging layer, and heparin was then attached to the surface in the presence of water-soluble carbodiimide. In the latter method, an octadecyltrichlorosilane (OTS) SAM was coated on the silicon surface as the bridging layer, and heparin was modified by attaching photosensitive aryl azide groups. Upon UV illumination, the modified heparin was then covalently immobilized onto the surface. The hydrophilicity of the silicon surface changed after each coating step, and heparin aggregates on APTMS SAM and OTS SAM were observed by atomic force microscopy (AFM). In vitro haemocompatibility assays demonstrated that the deposition of APTMS SAM, APTMS multilayer and OTS SAM enhanced the silicon's haemocompatibility, which was further enhanced by the heparin immobilization. There is no evident distinction regarding the haemocompatibility between the heparin-immobilized surfaces by both methods. However, heparin on silicon with APTMS SAM and multilayer as the bridging layers is very unstable when tested in vitro with a saline solution at 37 °C, due to the instability of APTMS SAM and multilayer on silicon. Meanwhile, photo-immobilized heparin on silicon with OTS SAM as the bridging layer showed superb stability.     

Design and Optimization of a Biosensor Surface Functionalization to Effectively Capture Urinary Extracellular Vesicles

For this study, we tested and optimized silicon surface functionalization procedures for capturing urinary extracellular vesicles (uEVs). The influence of the silane type (APTES or GOPS) and protein concentration on the efficiency of uEVs binding was investigated. Human lactadherin protein (LACT) was used to capture uEVs. We applied surface characterization techniques, including ellipsometry, atomic force microscopy, and time-of-flight secondary ion mass spectrometry, to observe changes in the biosensor surface after each functionalization step. uEVs were purified by a low-vacuum filtration method and concentrated by ultracentrifugation. The physical parameters of uEVs after the isolation procedure, such as morphology and size distribution, were determined using transmission electron microscopy and tunable resistive pulse sensing methods. We observed a gradual growth of the molecular layer after subsequent stages of modification of the silicon surface. The ToF-SIMS results showed no changes in the mean intensities for the characteristic peaks of amino acids and lipids in positive and negative polarization, in terms of the surface-modifying silane (APTES or GOPS) used. The most optimal concentration of LACT for the tested system was 25 µg/mL.     

金表面抗原抗体的固定及其荧光法的测定

抗原或抗体的固定是制作免疫传感器的基础 .免疫传感器由固定于载体的具有识别作用的抗原或抗体以及指示免疫反应的换能器组成 .金表面自组装技术固定生物分子既可用电化学检测 ,也可用光学检测和质量检测 ,因而近年来用金表面自组装技术固定生物分子的研究越来越多 .其原理是利用金硫键固定含巯基的化合物 ,然后用偶联剂将生物分子连接固定在金表面 ,或者直接将有巯基的生物分子固定在金表面 [1,2 ] .本文报道了在金表面自组装技术固定兔 Ig G和山羊抗兔 Ig G的方法基础上 ,建立了抗体竞争法、夹心法和抗体过剩法测定兔 Ig G和山羊抗兔 …     

Orientation of Antibodies on a 3-Aminopropyltriethoxylsilane-Modified Silicon Wafer Surface

An antibody can be specifically oxidized with periodate (NaIO₄) on the carbohydrate side chains at its C-terminal. Rabbit anti-hepatitis B surface antigen (anti-HBsAg) IgG antibodies were bound to the silicon wafer surface by covalent bonds between aldehydes generated on the carbohydrate side chains of the antibodies and the reactive amine groups of 3-aminopropyltriethoxylsilane(APTES)-modified silicon wafer surfaces. A control experiment was also performed by direct attachment of antibodies to glutaraldehyde-treated silicon surfaces. Two different coupling antibody strategies were investigated in this paper. Atomic force microscopy was used to observe the orientation of the site-directed and random attachment of rabbit anti-HBsAg IgG antibodies and the conservation of their antigen-binding capacity (AgBC) was assessed using an enzyme immunoassay (EIA).     

倏逝波光纤免疫传感器探头的修饰及表征

光纤探头上修饰生物识别分子是倏逝波光纤免疫传感器实现目标物检测的关键步骤. 以微囊藻毒素-LR (microcystin-LR, MC-LR)为例, 采用先将小分子半抗原MC-LR与经戊二醛活化的惰性蛋白(OVA)反应生成复合物MC-LR-OVA, 然后将该复合物通过双功能试剂连接到硅烷化后的光纤探头表面, 并采用XPS和倏逝波全光纤免疫传感器对其修饰效果进行表征. 结果表明, 修饰后探头表面化学元素组成随不同修饰步骤发生了显著的变化, MC-LR-OVA被共价键合到探头表面上. 探头对MC-LR抗体表现出强烈的特异性响应, 而对其它抗体蛋白的非特异性吸附很弱, 并且具有良好的再生性能. 因此, 该修饰方案适用于环境小分子污染物的检测.     

Poly(acrylic acid)-silicon Hybrids Prepared via a RAFT-mediated Process and Covalent Immobilization of Glucose Oxidase

A surface modification technique was proposed for the modification of silicon surface with glucose oxidase (GOD). The silicon surface was first graft copolymerized with acrylic acid (AAc) via surface-initiated reversible addition-fragmentation chain-transfer (RAFT)-mediated process. With the aid of a water-soluble carbodiimide, GOD was then covalently immobilized on the silicon surface through the amide linkage between the amino group of GOD and the carboxyl group of the grafted AAc polymer. The changes in the surface composition after polymer grafting and enzyme immobilization on the silicon surface were investigated using X-ray photoelectron spectroscopy (XPS). The amount of GOD immobilized could be varied by changing the thickness of the polymer layer and the immobilization time. The GOD-functionalized silicon hybrids are potential useful in the application of the silicon-based biosensors.     

Cyclodextrin‐Modified Zeolites: Host–Guest Surface Chemistry for the Construction of Multifunctional Nanocontainers

The functionalization of nanoporous zeolite L crystals with β‐cyclodextrin (CD) has been demonstrated. The zeolite surface was first modified with amino groups by using two different aminoalkoxysilanes. Then, 1,4‐phenylene diisothiocyanate was reacted with the amino monolayer and used to bind CD heptamine by using its remaining isothiocyanate groups. The use of the different aminoalkoxysilanes, 3‐aminopropyl dimethylethoxysilane (APDMES) and 3‐aminopropyl triethoxysilane (APTES), led to drastic differences in uptake and release properties. Thionine was found to be absorbed and released from amino‐ and CD‐functionalized zeolites when APDMES was used, whereas functionalization by APTES led to complete blockage of the zeolite channels. Fluorescence microscopy showed that the CD groups covalently attached to the zeolite crystals could bind adamantyl‐modified dyes in a specific and reversible manner. This strategy allowed the specific immobilization of His‐tagged proteins by using combined host–guest and His‐tag‐Ni‐nitrilotriacetic acid (NTA) coordination chemistry. Such multifunctional systems have the potential for encapsulation of drug molecules inside the zeolite pores and non‐covalent attachment of other (for example, targeting) ligand molecules on its surface.     

Fluorescent nanoparticle adhesion assay: a novel method for surface pKa determination of self-assembled monolayers on silicon surfaces

Since the computer industry enables us to generate smaller and smaller structures, silicon surface chemistry is becoming increasingly important for (bio-)analytical and biological applications. For controlling the binding of charged biomacromolecules such as DNA and proteins on modified silicon surfaces, the surface pK(a) is an important factor. Here we present a fluorescent nanoparticle adhesion assay as a novel method to determine the surface pK(a) of silicon surfaces modified with weak acids or bases. This method is based upon electrostatic interactions between the modified silicon surface and fluorescent nanoparticles with an opposite charge. Silicon slides were modified with 3-aminopropyltriethoxysilane (APTES) and were further derivatized with succinic anhydride. Layer thickness of these surfaces was determined by ellipsometry. After incubating the surfaces with an amine-reactive fluorescent dye, fluorescence microscopy revealed that the silicon surfaces were successfully modified with amine- and carboxyl-groups. Two surface pK(a) values were found for APTES surfaces by the fluorescent nanoparticle adhesion assay. The first surface pK(a) (6.55 ± 0.73) was comparable with the surface pK(a) obtained by contact angle titration (7.3 ± 0.8), and the second surface pK(a) (9.94 ± 0.19) was only found by using the fluorescent nanoparticle adhesion assay. The surface pK(a) of the carboxyl-modified surface by the fluorescent nanoparticle adhesion assay (4.37 ± 0.59) did not significantly differ from that found by contact angle titration (5.7 ± 1.4). In conclusion, we have developed a novel method to determine the surface pK(a) of modified silicon surfaces: the fluorescent nanoparticle adhesion assay. This method may provide a useful tool for designing pH-dependent electrostatic protein and particle binding/release and to design surfaces with a pH-dependent surface charge for (bio-)analytical lab-on-a-chip devices or drug delivery purposes.     

Formation, structure, and reactivity of amino-terminated organic films on silicon substrates

Amino-functionalized organic films were prepared by self-assembling 3-aminopropyltriethoxysilane (APTES) on silicon wafers in either anhydrous toluene or phosphate-buffered saline (PBS) for varied deposition times. Fourier transform infrared spectroscopy (FTIR) and ellipsometry have shown that the structure and thickness of APTES films are governed by the deposition time and reaction solution. Deposition from an anhydrous toluene solution produces APTES films ranging from 10 to 144 A in thickness, depending on the reaction time. FTIR spectra indicate that film growth initially proceeds by adsorption of APTES to the silicon surface followed by siloxane condensation, and after an extended period of time APTES molecules accumulate on the underlying APTES film by either covalent or noncovalent interactions. In contrast, spectroscopically indistinguishable APTES films in thickness ranging from 8 to 13 A were formed when deposition was conducted in aqueous solutions. Measured water contact angles indicate that APTES films deposited in aqueous solutions are more hydrophilic compared to those prepared in toluene solutions. Fluorescence measurements revealed that APTES films prepared in toluene solutions contain more reactive surface amino groups by ca. 3 to 10 times than those prepared in aqueous solutions for the identical reaction time.     

Structure of Protein Layers during Competitive Adsorption

The formation of protein layers during competitive adsorption was studied with ellipsometry. Single, binary, and ternary protein solutions of human serum albumin (HSA), IgG, and fibrinogen (Fgn) were investigated at concentrations corresponding to blood plasma diluted 1/100. As a model surface, hydrophobic hexamethyldisiloxane (HMDSO) plasma polymer modified silica was used. By using multiambient media measurements of the bare substrate prior to protein adsorption the adsorbed amount as well as the thickness and refractive index of the adsorbed protein layer could be followedin situand in real time. Under conditions used in these experiments neither IgG nor fibrinogen could fully displace serum albumin from the interface. The buildup of the protein layer occurred via different mechanisms for the different protein systems. Fgn adsorbed in a rather flat orientation at low adsorbed amounts, while at higher surface coverage the protein reoriented to a more upright orientation in order to accommodate more molecules in the adsorbed layer. IgG adsorption proceeded mainly end-on with little reorientation or conformational change on adsorption. Finally, for HSA an adsorbed layer thickness greater than the molecular dimensions was observed at high concentrations (although not at low), indicating that aggregates or multilayers formed on HMDSO plasma polymer surfaces. For all protein mixtures the adsorbed layer structure and buildup indicated that Fgn was the protein dominating the adsorbed layer, although HSA partially blocked the adsorption of this protein. At high surface concentration, HSA/Fgn mixtures show an abrupt change in both adsorbed layer thickness and refractive index suggesting, e.g., an interfacial phase transition of the mixed protein layer. A similar but less pronounced behavior was observed for HSA/IgG. For IgG/Fgn and HSA/IgG/Fgn a buildup of the adsorbed layer similar to that displayed by Fgn alone was observed.     

氨基硅烷偶联剂对蒙脱石的修饰改性研究

研究了氨基硅烷偶联剂对蒙脱石的修饰改性,并和长链烷基硅烷偶联剂作对比.通过改性前后蒙脱石的傅立叶红外光谱(FT-IR),广角X射线衍射(WAXD),热失重分析(TGA)研究发现,在冰醋酸的处理下,氨基硅烷偶联剂不但能够对蒙脱石进行表面偶联修饰而且能够以插层剂的形式进入蒙脱石的层间.初步的浸润/分散性实验结果表明:氨基硅烷插层/表面修饰改性的蒙脱石在弱极性乙醇溶剂中的分散性能明显提高.     

How to prepare reproducible, homogeneous, and hydrolytically stable aminosilane-derived layers on silica

Five functional silanes--3-aminopropyltriethoxysilane (APTES), 3-aminopropyltrimethoxysilane (APTMS), N-(2-aminoethyl)-3-aminopropyltriethoxysilane (AEAPTES), N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (AEAPTMS), and N-(6-aminohexyl)aminomethyltriethoxysilane (AHAMTES)--were assessed for the preparation of hydrolytically stable amine-functionalized silica substrates. These can be categorized into three groups (G1, G2, and G3) based on the intramolecular coordinating ability of the amine functionality to the silicon center. Silanizations were carried out in anhydrous toluene as well as in the vapor phase at elevated temperatures. Aminosilane-derived layers prepared in solution are multilayers in nature, and those produced in the vapor phase have monolayer characteristics. In general, vapor-phase reactions are much less sensitive to variations in humidity and reagent purity, are more practical than the solution-phase method, and generate more reproducible results. Intramolecular catalysis by the amine functionality is found to be important for both silanization and hydrolysis. The primary amine group in the G1 silanes (APTES and APTMS) can readily catalyze siloxane bond formation and hydrolysis to render their silane layers unstable toward hydrolysis. The amine functionality in the G3 silane (AHAMTES) is incapable of intramolecular catalysis of silanization so that stable siloxane bonds between the silane molecules and surface silanols do not form easily. The secondary amine group in the G2 silanes (AEAPTES and AEAPTMS), on the other hand, can catalyze siloxane bond formation, but the intramolecular catalysis of bond detachment is sterically hindered. The G2 silanes are the best candidates for preparing stable amine-functionalized surfaces. Between the two G2 aminosilanes, AEAPTES results in more reproducible silane layers than AEAPTMS in the vapor phase due to its lower sensitivity to water content in the reaction systems.     

Detailed structural examinations of covalently immobilized gold nanoparticles onto hydrogen-terminated silicon surfaces

The modification of flat semiconductor surfaces with nanoscale materials has been the subject of considerable interest. This paper provides detailed structural examinations of gold nanoparticles covalently immobilized onto hydrogen-terminated silicon surfaces by a convenient thermal hydrosilylation to form Si-C bonds. Gold nanoparticles stabilized by omega-alkene-1-thiols with different alkyl chain lengths (C3, C6, and C11), with average diameters of 2-3 nm and a narrow size distribution were used. The thermal hydrosilylation reactions of these nanoparticles with hydrogen-terminated Si(111) surfaces were carried out in toluene at various conditions under N2. The obtained modified surfaces were observed by high-resolution scanning electron microscopy (HR-SEM). The obtained images indicate considerable changes in morphology with reaction time, reaction temperature, as well as the length of the stabilizing omega-alkene-1-thiol molecules. These surfaces are stable and can be stored under ambient conditions for several weeks without measurable decomposition. It was also found that the aggregation of immobilized particles on a silicon surface occurred at high temperature (> 100 degrees C). Precise XPS measurements of modified surfaces were carried out by using a Au-S ligand-exchange technique. The spectrum clearly showed the existence of Si-C bonds. Cross-sectional HR-TEM images also directly indicate that the particles were covalently attached to the silicon surface through Si-C bonds.     

Easy and efficient bonding of biomolecules to an oxide surface of silicon

A new method is described to attach biological molecules to the surface of silicon. Semiconductors such as Si modified with surface-bound capture molecules have enormous potential for use in biosensors for which an ideal detection platform should be inexpensive, recognize targets rapidly with high sensitivity and specificity, and possess superior stability. In this process, a self-assembled film of an organophosphonic acid is bonded to the native or synthesized oxide-coated Si surface as a film of the correspondingphosphonate. The phosphonate film is functionalized to enable covalently coupling biological molecules, ranging in size from small peptides to large multi-subunit proteins, to the Si surface. Surface modification and biomolecule coupling procedures are easily accomplished: all reactions can proceed in air, and most take place under ambient conditions. The biomolecule-modified surfaces are stable under physiological conditions, are selective for adhesion of specific cells types, and are reusable.