A new sensitive spectrophotometric determination of sodium 2-mercaptoethanesulfonate using leuco xylene cyanol FF

A simple and accurate spectrophotometric method for determination of sodium 2-mercaptoethanesulfonate (MESNa) with leuco xylene cyanol FF (LXCFF) has been developed. The proposed method is based on the reaction of MESNa with potassium iodate(V) in acidic medium to liberate iodine, which oxidizes leuco xylene cyanol FF to its blue form xylene cyanol FF. The xylene cyanol FF dye formed shows maximum and stable absorbance at pH 4.1–4.2. Absorbance of the obtained colored products was measured at 613 nm. The molar absorptivity, limit of detection and limit of determination of the method were found to be 3.64 × 10⁴ L/mol cm, 0.29 and 0.33 μg/mL, respectively. The colour system obeys Beer’s laws in the range 0.4–4.0 μg/mL of MESNa. All the variables were studied in order to optimize the reaction conditions. The procedure was used for determination of MESNa in pharmaceutical preparations. Reliability of determination was confirmed applying standard iodometric method, recommended by European and Polish Pharmacopoeia.     

Diamond paste-based electrodes for determination of Cr(III) in pharmaceutical compounds

A new class of monocrystalline diamond paste-based electrodes is proposed for the determination of chromium(III) at trace levels in vitamins. Three types of monocrystalline diamond—natural diamond 1 (natural diamond), synthetic diamond 50 (synthetic-1), and synthetic diamond 1 (synthetic-2)—were used for electrode construction. The linear concentration ranges are between 10^–10 and 10^–8; 10^–9 and 10^–7, and 10^–10 to 10^–8 mol L^–1, with limits of detection of 10^–12, 10^–12, and 10^–11 mol L^–1, when natural diamond, synthetic-1, and synthetic-2, respectively, are used as electrode materials. For electrodes based on natural diamond and synthetic-1 it was found that Cr(III) yields a peak at about +0.275±0.015 V (vs. Ag/AgCl) within a predetermined positive potential range situated between +0.4 and +0.2 V, while for the electrode based on synthetic-2 the peaks are found at +0.300±0.015 V (vs. Ag/AgCl). The proposed method is reliable for the determination of chromium(III) at trace levels in two vitamin tablets (RSD<0.2%).     

Three useful bromimetric methods for the determination of salbutamol sulfate

Three different methods developed for the determination of salbutamol sulfate (SBS), in pure drug form and in dosage forms, are discussed. The methods are based on the oxidation–bromination reaction of the drug by bromine generated in-situ by the interaction of bromate with bromide in acid medium. In titrimetry the drug is titrated directly with bromate in the presence of a large excess of bromide and in sulfuric acid medium using methyl red as indicator. Spectrophotometry is based on addition of a measured excess of bromate–bromide mixture to the sample solution in sulfuric acid medium followed by the estimation of surplus bromine by reacting it with a definite amount of methyl orange dye and measuring the absorbance at 510 nm. The amount of bromate reacting corresponds to the sample content. The kinetic method depends on the linear relationship between the concentration of the drug and time for oxidation and bromination as indicated by the bleaching of the methyl orange acid colour by the bromine generated in situ. Titrimetry is applicable in the 2–20 mg range. In spectrophotometry, Beer's law is obeyed in the 0.5–5.0 g mL^–1 range whereas concentrations in the 5.0–25.0 g mL^–1 range can be determined by the kinetic method. The effect of common excipients and additives in tablets is discussed. The procedures have been successfully applied to dosage forms; the results agree well with those obtained by use of a reference method. The methods can be used to determine SBS at mg or g levels.     

Chromatographic behavior of cadmium in an ion-pair reversed-phase micro HPLC system and its application to the determination of bio-available cadmium in soil samples

A novel reversed phase ion-pair micro HPLC system with on-line fluorescence detection has been developed systematically and studied for the determination of cadmium in its bio-available fractions of soil samples. In this system, a micro ODS column of 1.0 mm i.d.×150 mm length and a mobile phase containing 6 mmol L^-1 8-hydroxyquinoline 5-sulphonic acid (HQS), 3 mmol L^-1 cetyltrimethylammonium bromide (CTMABr), 10 mmol L^-1 acetic acid-acetate buffer (pH 5.1) as well as 50% acetonitrile at 50 L min^-1 flow rate were employed to determine cadmium with a 2 L flow cell through its fluorescence at 518 nm under 338 nm excitation. Furthermore, the composition of Cd-HQS chelate formed on the column was confirmed to be [Cd(HQS)₂]^2- through a log–log plot method, and then combined with the ion-pair reagent by the electrostatic force under the chromatographic condition proposed. With such a method, the detection limit of cadmium was 8.48 ng mL^-1 (3) with 1 L sample injection, and the linear range for the determination of cadmium was 30–800 ng mL^-1 (R²=0.992). This method has been successfully applied to determination of cadmium in its bio-available fractions of BCR-483 and soil samples without interference from other coexistent metal ions. The RSD (n=6) was less than 7.3%. The results were in agreement with the indicative value for BCR-483 and those for the soil samples obtained by ICP-MS with a pretreatment of bis(1,1,3,3-tetramethylbutyl) phosphinic acid extraction.     

Spectrophotometric determination of vanadium(IV) in the presence of vanadium(V) using Br-PADAP

In the present paper, a simple and sensitive method is proposed for vanadium(IV) determination in the presence of vanadium(V). This is based on the oxidation of vanadium(IV) present in the sample to vanadium(V) by addition of iron(III) cation, followed by a complexation reaction of iron(II) with the spectrophotometric reagent 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (Br-PADAP). The iron(II) reacts with Br-PADAP immediately, forming a stable complex with a large molar absorptivity. The vanadium(IV) determination is possible, with a calibration sensitivity of 0.549 g ml^–1, for an analytical curve of 18.8 ng ml^–1 to 2.40 g ml^–1, molar absorptivity of 2.80 × 10⁴ 1 mole^–1 cm^–1 and a detection limit of 5.5 ng ml^–1. Selectivity was increased with the use of EDTA as a masking agent. The proposed method was applied for the vanadium(IV) determination in the presence of several amounts of vanadium(V). The results revealed that 200 g of vanadium(V) do not interfere with determination of 5.00 g of vanadium(IV). The precision and the accuracy obtained were satisfactory (R. S. D.<2%).     

High-performance liquid chromatographic determination of diltiazem in human plasma after solid-phase and liquid–liquid extraction

A selective, sensitive, and accurate high-performance liquid chromatographic method for determination of diltiazem in plasma samples has been developed and validated. The effects of mobile phase composition, buffer concentration, mobile phase pH, and concentration of organic modifiers on retention of diltiazem and internal standard were investigated. Solid-phase and liquid–liquid extraction were examined and proposed for isolation of the drug and elimination of endogenous plasma interferences. A 5 m Lichrocart Lichrospher 60 RP-select B chromatographic column was used; the mobile phase was acetonitrile–0.025 mol L^–1 KH₂PO₄ (pH 5.5), 35:65 ( v / v) at a flow-rate of 1.5 mL min^–1. The detection wavelength was 215 nm. The calibration plots were linear in the concentration range 20.0–500.0 ng mL^–1. The method has been implemented to monitor diltiazem levels in patient samples.     

2-(2-Thiazolylazo)-pcresol (TAC) as a reagent for the spectrophotometric determination of titanium (IV)

The reaction between titanium(IV) and 2-(2-thiazolylazo)-p-cresol-(TAC) in aqueous methanol media at apparent pH 4.0–5.6 results in a intensely coloured complex that is stable for at least 2 h. The combining ratio is 1 1 cation TAC. Beer's law is obeyed up to 5.0 g/ml titanium(IV) at 580 nm. The apparent molar absorptivity at 580 nm is 9.82.10³ l.mole^–1.cm^–1 and the detection limit obtained was 5 ng/ml titanium (IV). A spectrophotometric method for the simultaneous determination of titanium and iron with TAC is proposed.     

Electrochemical Intercalation of Lithium Ions into Electrolytic Vanadium Pentoxide

The discharge of thin films of Li _x V₂O₅ is described by a mathematical diffusion model. The chemical diffusion coefficient for lithium ions, estimated with the model, is equal to (1.01–2.5) × 10^–11 cm²/s. As the film thickness increases, the discharge capacity at a current of 20 A/cm² tends to the calculated limiting of 3.12 C/cm². The optimum thickness of the film electrode calculated for a discharge current of 20 A/cm² is 33.4 m and agrees satisfactorily with the experimental value.     

Extraction-spectrophotometric determination of iron with 2-(2′-benzothiazolylazo)-4,6-dimethylphenol

An extraction-spectrophotometric method for the determination of trace amounts of iron based on its extraction into chloroform with 2-(2-benzothiazolylazo)-4,6-dimethylphenol (BTADMP) from a pH 6.5 medium has been developed. The extracted 12 FeBTADMP complex species allow the determination of 4–30gmg of iron (=3.92×10⁴1·mol^–1·cm^–1 at 790 nm). The method is highly selective and has been applied to the determination of iron in polymineral-polyvitamin pharmaceutical products.     

A New Spectrophotometric Method for the Determination of Cerium Using Leuco Disulphine Blue

A new, simple, highly sensitive spectrophotometric method for the determination of trace amounts of cerium(IV) is described. The method is based on the oxidation of leuco disulphine blue (LDSB) to its blue form of disulphine blue by Ce(IV) in a sulfuric acid medium (pH 1.3–3.0); the absorbance of the formed dye is measured in an acetate buffer medium (pH 3.0–4.8) at 635 nm. The color system obeys Beer's law in the concentration range from 0.5 to 5.5 g mL^–1 cerium with a molar absorptivity of 1.75 × 10⁴ L mol^–1 cm^–1 and a Sandell's sensitivity of 0.008 g cm^–2. All variables were studied in order to optimize the reaction conditions. The developed method has been successfully applied to the determination of cerium in high purity rare-earth oxides, soil, natural water, plant tissue, human hair, and rock samples.     

Formation of Aromatic and Other Unsaturated End Groups in Carboxymethyl Cellulose During Hot Alkaline Treatment

Carboxymethyl cellulose (CMC, DS 0.58) was treated in solutions of sodium hydroxide (0.001–1 M) at 95 °C. The treated (1–12 h) CMC samples were purified by dialysis and analyzed by UV spectroscopy and by UV resonance Raman spectroscopy (UVRRS) with excitation at 244 nm. A UV absorption maximum at 265 nm and a UVRR signal at 1650 cm⁻¹ were indicative of formation of -conjugated aldehyde end groups in CMC through -elimination. Another strong UVRR band at 1610 cm⁻¹ gave evidence on conversion of some of the -conjugated aldehyde end groups to alkali stable aromatic structures.     

Spectrophotometric determination of nitrogen dioxide in air

Summary A sensitive spectrophotometric method for the determination of trace amounts of nitrogen dioxide, after fixing it as nitrite in alkaline sodium arsenite solution, is described. The reaction is based on the diazo-coupling of p-nitroaniline with chromotrophic acid in acetate medium (pH 6±0.5). The azo dye formed has its absorption maximum at 515 nm, with a molar absorptivity of 3.7×10⁴ l mol^–1 cm^–1. Beer's law is obeyed over the range 0–20 g of nitrite. The relative standard deviation is 2.5% for ten determinations of 10 g of nitrite. The effect of interfering gases and ions on the determination is discussed. The method has been applied to the determination of residual nitrogen dioxide in a laboratory fume cupboard and the results are compared with those obtained by the widely used sulphanilamide — NEDA method. Down to 0.5 g of nitrite can be determined.     

Extraction and spectrophotometric determination of uranium(VI) withN-phenylcinnamohydroxamic acid

Uranium(VI) reacts withN-phenylcinnamohydroxamic acid to form an orange-yellow complex in the pH range 5.5–8.5. The orange-yellow complex, having the composition of 12 (metal:ligand), is quantitatively extractable into ethyl acetate. The spectrum of the complex exhibits a maximum absorption at 400 nm with a molar absorptivity of 6500 M^–1·cm^–1. The coloured system obeys Beer's law in the concentration range 2–40g·ml^–1 of uranium(VI). The photometric sensitivity of the colour reaction is 0.037 g·cm^–2 of uranium(VI). Most of the common ions do not interfere and the method has been found to be simple, precise, and free from the rigid control of experimental conditions. The method has been applied to the determination of uranium in synthetic matrices and potable water.     

A rapid method for spectrophotometric determination of molybdenum in alloy steels

Summary A Rapid Method for Spectrophotometric Determination of Molybdenum in Alloy Steels Molybdenum (VI) forms an orange-red coloured mixed-ligand complex with perazine dimalonate and thiocyanate at room temperature (27°) in hydrochloric acid. The complex is soluble in ethanol. It exhibits absorption maximum at 460 nm. Beer's law is valid over the molybdenum concentration range 0.1–14.0,g/ml. Sandell's sensitivity of the reaction is 0.9·10^–3 g Mo/cm² and the molar extinction coefficient is 1.06·10⁴ 1·mol^–1·cm^–1 at 460 nm. The stoichiometry of the complex is (Perazine·H) [MoO(SCN)₄] as shown by Job's method, equilibrium shift method and elemental analyses of the isolated complex. The proposed method has been used for the determination of molybdenum in ores, alloy steels and in synthetic mixtures containing chromium, tungsten, iron, cobalt, nickel and copper.Presented at the 36th Pittsburgh Conference and Exposition on Analytical Chemistry and Applied Spectroscopy, New Orleans, February 25-March 1, 1985.     

Synthesis,crystal structure and magnetic properties of triaquahexakis(μ2-betaine)(μ3-oxo)triiron(III) perchlorate heptahydrate

The synthesis and characterization of the oxo-centered carboxylato-bridged trinuclear iron(III) complex, triaquahexakis(₂-betaine)(₃-oxo)triiron(III) perchlorate heptahydrate are described. X-ray crystallography shows that the Fe^III atom in the complex has a slightly distorted octahedral geometry, coordinated by four oxygen atoms from different betaine ligands [Fe—;O = 2.009(3) 2.034(3) Å], one aqua ligand [Fe—O = 2.028(4) and 2.031(3) Å] and the central ₃-oxo atom [Fe—O = 1.917(2) and 1.917(3) Å]. The central oxygen is ideally coplanar with the plane of the three metal atoms. Magnetic susceptibility data (4–320 K) show the presence of an antiferromagnetic exchange interaction with a coupling constant of J = –20.2 cm^–1.     

A new spectrophotometric method for the determination of hydrazine in environmental samples

Summary Hydrazine is determined spectrophotometrically by using veratraldehyde (3,4-dimethoxybenzaldehyde) as a new reagent. The reaction is based on the condensation of veratraldehyde with hydrazine in acidic medium. The resulting yellow coloured condensation product has maximum absorption at 410 nm. The colour system obeys Beer's law in the range of 0.065 to 0.3 g/ml of hydrazine. Molar absorptivity and Sandell's sensitivity are found to be 6.72×10⁴ l mol^–1 cm^–1 (±100) and 0.0004 g cm^–2, respectively. The method is successfully applied for the determination of hydrazine in polluted water, biological samples, in isoniazide tablets and in air. It is compared with other reported spectrophotometric methods and is found to be of comparable sensitivity.     

A toxicity view of the pesticide picloram when immobilized onto a silica gel surface

The pesticide picloram (4-amino-3,5,6-trichloropicolinic acid) was anchored onto silica gel to yield a new surface. Isothermal microcalorimetry was applied to study the toxic effects caused to microbial activity of a typical Brazilian agricultural soil by application of free and immobilized picloram. The activity of the microorganisms in 1.50 g of soil sample was stimulated by addition of 6.0 mg of glucose plus 6.0 mg of ammonium sulfate under 34.8% controlled humidity at 298.15±0.02 K. The activity was recorded through power–time curves for increasing amounts of the active principle, varying from zero to 10.00 g g^–1. The increasing amounts of picloram, either free or immobilized, caused a decrease of the original thermal effect. The calorimetric data showed that the anchored pesticide presented a much lower toxic effect than the free picloram on the microbial activity.     

Depth profile studies of ZrTiN coatings by laser ablation inductively coupled plasma mass spectrometry

The feasibility of depth profiling was studied by using a 193-nm ArF* excimer laser ablation system (GeoLas, MicroLas, Goettingen, Germany) with a lens array-based beam homogenizer in combination with an ICP-QMS Agilent 7500. Two ablation cells (20 and 1.5 cm³) were compared at the laser repetition rate of 1 Hz, laser beam energy of 135 mJ and the carrier gas flow rate 1.5 L min^–1 He + 0.78 L min^–1 Ar. The ablation cell dimensions are important parameters for signal tailing; however, very small cell volumes (e.g. 1.5 cm³) may cause memory effects, which can be probably explained by dominant inertial losses of aerosol on cell walls with its delayed mobilization. The 20-cm³ ablation cell seems to be appropriate for depth profiling by continuous single-hole drilling. The study of the influence of the pit diameter magnitude on the waning and emerging signals under small crater depth/diameter aspect ratios, which range between 0.75 and 0.0375 for the 3-m-thick coatings and pit diameters 4–80 m, revealed that the steady-state signals of pure coating and pure substrate (out of interface) were obtained at crater diameters between 20 and 40 m. Depth resolution defined by means of slopes of tangents in the layer interface region depend on the pit diameter and has an optimum value between 20 and 40 m and gives 0.6 m for the 20-m pit. In-depth variation of concentration of coating constituent (Ti) was proved to be almost identical with two different laser/ICP systems.Viktor Kanický performed this work while on leave at ETH Zurich     

Spectrophotometric determination of hafnium(IV) with 1-(2-pyridylazo)-2-naphthol

Summary The red complex formed between hafnium(IV) and 1-(2-pyridylazo)-2-naphthol (1 2) at pH 4.0 is used for Spectrophotometric determination of hafnium., the absorbance being measured at 545 nm. Beer's law is obeyed for hafnium concentration of 0.2 to 3.6g per ml. Molar absorptivity is 3.86×10⁴ and Sandell sensitivity is 0.0046g per cm². Hafnium has been determined in the presence of 6-fold amounts of zirconium. The relative standard deviation is ± 1.0%.

---

Zusammenfassung Der rote, bei pH 4,0 sich bildende Komplex mit 1-(2-Pyridylazo)-2-naphthol (1 2) dient zur Bestimmung von Hafnium (IV). Seine Extinktion wird bei 545 nm gemessen. Zwischen 0,2 und 3,6g Hf/ml ist das Beersche Gesetz gültig. Hafnium läßt sich in Gegenwart der sechsfachen Menge Zirkonium bestimmen. Die relative Standardabweichung beträgt ± 1,0%.

     

GC/MSD detection of the metabolic residues of metolachlor in tomato fruit

Summary A gas chromatograph/mass selective detector method is presented for the analysis of the major metabolic residues of metolachlor by acid hydrolysis of tomato fruit. The two major hydrolysis products, CGA-37913 (2-[2-ethyl-6-methylphenyl]amino-1-propanol) and derivatised CGA-49751 (4-[2-ethyl-6-methylphenyl]-2-hydroxy-5-methyl-3-morpholinone) were monitored in the selective ion mode atm/z 162 andm/z 160, respectively. Recoveries from 87 to 96% were obtained for tomato fortified at 50 to 200g kg^–1. The proposed method of analysis will allow for a detection limit of 11 g kg^–1 for CGA-37913 and 12 g kg^–1 for the derivatised CGA-49751.