Dehydrogenation of alcohols with allyl carbonates catalyzed by palladium or ruthenium complexes

Treatment of alkyl allyl carbonates with a phosphine-free palladium catalyst in acetonltrile affords ketones or aldehydes in high yields. This new method of oxidation of alcohols via allyl carbonates can be applied to various alcohols except simple primary alcohols. The reaction proceeds under neutral conditions and hence various acid- or base-sensitive functional groups are not affected during the reaction. Ruthenium hydride complex is also an effective catalyst. Direct dehydrogenatlon of secondary or allylic alcohols was carried out by the reaction with allyl methyl carbonate by the catalysis of the ruthenium complex. 1,4-Diols and 1,5-diols are converted to lactones with excess allyl methyl carbonate.     

Phase-transfer-catalyzed asymmetric acylimidazole alkylation

2-Acylimidazoles are alkylated under phase-transfer conditions with cinchonidinium catalysts at -40 degrees C with allyl and benzyl electrophiles in high yield with excellent enantioselectivity (79 to >99% ee). The acylimidazole substrates are made in three steps from bromoacetic acid via the N-acylmorpholine adduct. The catalyst is made in high purity allowing for S-product formation (6-20 h) under mild conditions, consistent with an ion-pair mechanism. The products are readily converted to useful ester products using methyltriflate and sodium methoxide, via a dimethylacylimidazolium intermediate without racemization. The process is efficient, direct, and amenable to other electrophiles and transformations that proceed through an enolate intermediate.     

Anchoring of copper complex in MCM-41 matrix: a highly efficient catalyst for epoxidation of olefins by tert-BuOOH

A complex moiety containing copper (II) has been anchored covalently into the organic-modified Si-MCM-41 to prepare a new catalyst. The amine group containing organic moiety 3-aminopropyl-triethoxysilane has been first anchored on the surface of Si-MCM-41 via silicon alkoxide route. The amine group upon condensation with salicyldehyde affords a bidentate ligand in the mesoporous matrix for anchoring copper(II) ions. The prepared catalyst has been characterized by UV-vis, electron paramagnetic resonance (EPR), and infrared (IR) spectroscopic analysis, small-angle X-ray diffraction, and N2 sorption study. A remarkable difference in the pore structure has been observed after the immobilization of copper(II) complex in Si-MCM-41. The catalyst showed excellent catalytic efficiency in epoxidation reactions with various olefinic compounds including styrene and allyl alcohol, using tert-BuOOH as oxidant. Notably, styrene shows unprecedented high conversion (97%) as well as epoxide selectivity (89%) with tert-BuOOH over the Cu-MCM-41 catalyst.     

Stereoselective Isomerization of Unsymmetrical Diallyl Ethers to Allyl (E)-Vinyl Ethers by a Cationic Iridium Catalyst

The stereoselective isomerization of unsymmetrical diallyl ethers to allyl (E)-vinyl ethers was carried out in the presence of a cationic iridium(I) catalyst. The catalyst prepared in situ by treating [Ir(cod)(PPh₂Me)₂]PF₆ with hydrogen was found to be an excellent catalyst to selectively isomerize the less substituted allyl group to an (E)-vinyl ether.     

Palladium-catalyzed intramolecular coupling between aryl iodides and allyl moieties via thermal and microwave-assisted conditions

Palladium-catalyzed intramolecular cross-coupling reactions between aryl iodides and allyl moieties were successfully demonstrated in the presence of palladium catalyst, tri-o-tolylphosphine, a tertiary amine, and water. Several kinds of trans-2,4-disubstituted 1,2,3,4-tetrahydroquinolines were synthesized in 73-88% yields with excellent diastereoselectivities. This method was further applied to a large variety of substrates to form five-, six-, and seven-membered carbo- and heterocycles in good yields, regardless of the ring-containing atom, via microwave-assisted conditions.     

Immobilized copper(II) on nitrogen‐rich polymer‐entrapped Fe3O4 nanoparticles: a highly loaded and magnetically recoverable catalyst for aqueous click chemistry

A heterogeneous magnetic copper catalyst was prepared via anchoring of copper sulfate onto multi‐layered poly(2‐dimethylaminoethyl acrylamide)‐coated magnetic nanoparticles and was characterized using various techniques. The catalyst was found to be active, effective and selective for one‐pot three‐component reaction of alkyl halide, sodium azide and alkyne, known as copper‐catalyzed click synthesis of 1,2,3‐triazoles. As little as 0.3 mol% of catalyst was found to be effective under the optimum conditions. The catalyst could also be recycled and reused up to seven times without significant loss of activity. Thermal stability, high loading level of copper on catalyst, broad diversity of alkyl/benzyl/allyl bromide/chloride and alkyl/aryl terminal alkynes without isolation of azide intermediate, and good to excellent yields of products make this procedure highly economical. Copyright © 2015 John Wiley & Sons, Ltd.     

Stannylated allyl carbonates as versatile building blocks for the diversity oriented synthesis of allylic amines and amides

Stannylated allylic carbonates are suitable substrates for Pd-catalyzed allylic aminations. In DMF and with [allylPdCl](2) as catalyst the stannylated allyl amines formed can be directly coupled with electrophiles according to the Stille protocol, giving rise to highly functionalized building blocks in excellent yields.     

Efficient ruthenium carbenoid-catalyzed cross-metathesis of allyl halides with olefins

[reaction: see text] Cross-metatheses of allyl halides and terminal olefins mediated by catalyst 2 are reported and showed good yield and excellent E/Z selectivity. The application of these compounds as alkylating reagents is also demonstrated.     

Catalyst-free allylation of 2-aminophenol–derived aldimines with allyltrichlorosilane under thermal conditions

Allylation of 2-aminophenol-derived aldimines using allyltrichlorosilane under catalyst free conditions has been developed. This reaction afforded the corresponding homoallylic amines in good to excellent yields (68–94%). The salicylaldehyde-derived aldimines as well as benzoylhydrazone also found to react with allyltrichlorosilane smoothly under the same conditions, to furnish the corresponding homoallylic amine derivatives. This study suggests that the phenolic –OH group acts as an anchoring group for the transfer of allyl group from allyl silane reagent.     

Copper-Catalyzed Enantioselective and Regiodivergent Allylation of Ketones with Allenylsilanes

We report herein a regiodivergent and enantioselective allyl addition to ketones with allenylsilanes through copper catalysis. With the combination of CuOAc, a Josiphos-type bidentate phosphine ligand and PhSiH₃, allyl addition to a variety of ketones furnishes branched products in excellent enantioselectivities. The regioselectivity is completely reversed by employing the P-stereogenic ligand BenzP*, affording the linear products with excellent enantioselectivities and good Z-selectivities. The linear Z-product could be converted to E-product via a catalytic geometric isomerization of the Z-alkene group. The silyl group in the products could provide a handle for downstream elaboration.     

Palladium pincer complex catalyzed cross-coupling of vinyl epoxides and aziridines with organoboronic acids

Palladium-catalyzed cross-coupling of vinyl epoxides and aziridines with organoboronic acids was performed by using 0.5-2.5 mol % pincer-complex catalyst. The reactions proceed under mild conditions affording allyl alcohols and amines with high regioselectivity and in good to excellent yields. Under the applied reaction conditions aromatic chloro-, bromo- and iodo substituents are tolerated. Our results indicate that the mechanism of the pincer complex catalyzed and the corresponding palladium(0) catalyzed process is substantially different. It was concluded that the transformations proceed via transmetalation of the organoboronic acids to the pincer-complex catalyst followed by an S(N)2'-type opening of the vinyl epoxide or aziridine substrate. In this process the palladium atom is kept in oxidation state +2 under the entire catalytic process, and therefore oxidative side reactions can be avoided.     

E-Selective Hydrothiolation of Terminal Arylallenes with Arylthiols Catalyzed by Ni (PMe3)4

A catalytic system of regioselective synthesis of allyl sulfides via hydrothiolation of terminal arylallenes with arylthiols has been developed using nickel(0) complex Ni (PMe₃)₄ as a catalyst. In most cases the excellent to moderate yields were obtained under mild conditions. A catalytic mechanism was suggested and partially-experimentally verified. To the best of our knowledge, this is the first example of regioselective addition of thiophenols to terminal arylallenes catalyzed by nickel(0) complex. It was noteworthy that this catalytic system was only applicable to thiophenol compounds with terminal arylallenes.     

Novel and efficient method for the allylation of carbonyl compounds and imines using triallylaluminum

This is the first report of the use of triallylaluminum as a reagent for the allylation of carbonyl compounds and imines. The allylation of ketimines without additional metal catalyst is known so far only in the case of the Grignard reagent. Triallylaluminum is a useful alternative to provide the homoallylic amines in excellent yield upon addition to aldimines and ketimines. The significant reactivity of this reagent was confirmed by its reaction with a sterically rigid ketone such as adamantanone to provide 1-adamantyl-3-buten-1-ol in 98% yield. The chemoselectivity of triallylaluminum was demonstrated by using different ketoesters. It is noteworthy that triallylaluminum is prepared from allyl bromide and aluminum metal, and not from a Grignard reagent, and that the procedure is operationally simple, leading to good to excellent product yields.     

端烯丙基聚硅氧烷的合成及其在乙烯聚合中的行为

通过与大分子单体的共聚合是合成接枝聚合物的一个重要方法。已有人合成了端苯乙烯和丙烯酸酯的聚硅氧烷大分子单体,本文报道对端烯丙基聚二甲基硅氧烷的合成以及添加聚硅氧烷对Ziegler-Natta型催化剂乙烯聚合行为的影响。     

Aromatic allylation via diazotization: metal-free C-C bond formation

A new method for the synthesis of allyl aromatic compounds not involving any metal-containing reagent or catalyst has been developed. Arylamines substituted with a large number of different substituents were converted via diazotizative deamination with tert-butyl nitrite in allyl bromide and acetonitrile to the corresponding allyl aromatic compounds. The allylation reaction was found to be suitable for larger scale synthesis due to short reaction times, a nonextractive workup, and robustness toward moisture, air, and type of solvent.     

Cupric chloride promoted regioselective C-allylation of enaminones

Regioselective allylation of enaminones using CuCl₂ as the catalyst to give C-allylated products is reported for the first time. The C-allylated products undergo hydrolysis followed by a rearrangement yielding β-keto allyl enamides in excellent yields.     

SYNTHESIS OF ALKYL AND ARYL 1-PROPENYL ETHER MONOMERS: A NEW APPROACH

A new, convenient synthesis of alkyl and aryl 1-propenyl ether monomers in good to excellent yields has been developed. Alkyl and aryl allyl ethers can be smoothly isomerized to the desired 1-propenyl ethers by refluxing in a basic ethanolic solution containing pentacarbonyliron as a catalyst. A simplified two-step, one-pot procedure has also been developed which consists of combining an alcohol with allyl bromide in the presence of base and then adding pentacarbonyliron to isomerize the in-situ generated allyl ether to directly give the 1-propenyl ether. Good yields of alkyl 1-propenyl ethers were obtained using this process. Factors affecting the isomerization reaction were investigated and a mechanism was proposed.     

Practical Stannylation of Allyl Acetates Catalyzed by Nickel with Bu3SnOMe

A practical and scalable nickel‐catalyzed allylic stannylation of allyl acetates with Bu₃SnOMe is described. A variety of acyclic and cyclic allyl acetates, even with base‐sensitive moieties, undergoes the stannylation by using NiBr₂/4,4′‐di‐tert‐butylbipyridine (dtbpy)/Mn catalyst system to afford highly functionalized allyl stannanes with excellent regioselectivity and yields. Furthermore, the scope of protocol is also extended by the reaction of propargyl acetates, giving rise to propargyl or allenyl stannanes. Additionally, a unique diastereoselectivity using the nickel catalyst different from the palladium was demonstrated for the stannylation of cyclic allyl acetates. In the reaction, inexpensive and stable nickel complexes, abundant reductant (Mn), and atom‐economical stannyl source were used.     

Cascade synthesis of dihydrobenzofuran via Claisen rearrangement of allyl aryl ethers using FeCl3/MCM-41 catalyst

Dihydrobenzofuran as one of the active ingredients of the naturally occurring motif is synthesized by using in situ generation of ortho allyl phenols. Aryl allyl ethers on reacting with catalytic amounts of non noble metal iron (III) chloride supported on MCM-41 under moderate reaction conditions yield dihydrobenzofuran. First step via Claisen rearrangement gives ortho allyl phenol followed by its in situ cyclization to yield dihydrobenzofuran in very good yields. Both Lewis as well as Brønsted acidity of the catalyst as evidenced by Py-FTIR studies was found to catalyze the cascade synthesis of dihydrobenzofuran. The scope of the present strategy was successfully demonstrated for several substrates with varying electronic effects for the synthesis of corresponding dihydrobenzofuran with high yields in a range of 71–86%.     

聚-4-氧杂-6,7-双二苯膦基庚基硅氧烷铑配合物的合成及其催化硅氢化性能

4-氧杂-6,7-二氯庚基三甲氧基硅烷依次与二苯膦钾、气相法二氧化硅、三氯化铑作用,合成了聚-4-氧杂-6,7-双二苯膦基庚基硅氧烷铑配合物。它对烯烃与取代烯烃的硅氢化反应具有良好的催化活性。