Chemical synthesis and structural characterization of small AuZn nanoparticles

In this paper, we report the aqueous synthesis of bimetallic Au-Zn nanoparticles of different compositions by the simultaneous reduction technique. The stability and atomic configuration of the particles are studied through high-resolution transmission electron microscopy (HRTEM) and UV-Vis optical absorption techniques. Depending on the composition, small bimetallic nanoparticles of 1–15 nm in size were obtained. The average size and size distribution of the bimetallic nanoparticles are seen to be critically dependent on the atomic ratio of the constituting elements Au and Zn. While a 1:1 atomic proportion of Au and Zn produced most stable nanoparticles of smallest average size, nanoparticles produced with higher content of either of the component elements are unstable, inducing agglomeration and coalescence to form elongated structures with uneven morphologies. Au₃Zn₁ nanoparticles followed a directional growth pattern, producing bimetallic nanorods with multiple crystalline domains. Interestingly, in these rod-like nanostructures, the domains are in well array of solid solution-like bimetallic and pure mono-metallic regions alternatively. Such nanostructures with uneven morphology and compositions might show distinct catalytic selectivity in chemical reactions. PACS 61.46.-w; 87.64.Ee; 74.62.Bf     

Deposition and wettability of silver nanostructures on Si(1 0 0) substrate based on galvanic displacement reactions

A new route for silver electroless deposition on Si(1 0 0) substrate is developed based on the galvanic displacement process. The basic electroless bath contains NaF and AgNO₃ with different concentrations. The morphologies of electrolessly deposited silver nanostructures, including silver nanowires and nanoparticles, are strongly dependent on the electrolyte composition. Adding an excess dosage of polyvinylpyrrolidone into the basic electrolyte yields final silver films of porous structures composed by multitudinous Ag nanoparticles. The porous silver films possess the surface hydrophobic property after the modification with n-dodecanethiol. Unidirectional wetting and spreading of a water droplet are also demonstrated on the patterned porous Ag films.     

In-situ preparation of 1D CuO nanostructures using Cu2(OH)2CO3 nanoribbons as precursor for sacrifice-template via heat-treatment

One-dimensional (1D) CuO nanostructures with nanoribbons, scroll-like structure, arrays of CuO nanoparticles and nanorod-like morphologies respectively, have been successfully prepared using the single-crystalline Cu₂(OH)₂CO₃ nanoribbons as precursors for sacrifice-template via heat-treatments. The series of morphologies images for decomposition kinetics process of Cu₂(OH)₂CO₃ nanoribbons as heat-treatment temperature increased are presented in this work. The result demonstrates that the morphologies of the 1D CuO nanostructures obtained are mainly due to the ribbon-like shape of the precursors. The morphologies of CuO nanostructures also strongly depend on the heat-treatment conditions. At relatively low heat-treatment temperature and heating rate, the morphological features of the precursor can be preserved well, while arrays of CuO nanoparticles can be obtained at higher heating rate and CuO rod-like shape can be prepared with increasing heat-treatment temperature.     

Core–shell nanostructures and nanocomposites of Ag@TiO2: effect of capping agent and shell thickness on the optical properties

Two different shell-forming reagents viz. titanium isopropoxide and titanium hydroxyacylate, have been employed to obtain core–shell nanostructures of Ag@TiO₂. However, nanocomposites were formed when the shell-forming agent, titanium isopropoxide, was added before breaking the micelles. Titanium hydroxyacylate has been used for the first time as a shell-forming agent which resulted in uniform core–shell structures of Ag@TiO₂ with core diameter ranging from 10 to 40 nm and a shell thickness of 10–50 nm. The low rate of hydrolysis of titanium hydroxyacylate than titanium isopropoxide (used in other methods) appears to be responsible for the uniform shell thickness. The presence of capping agent (2-mercaptoethanol) disrupts the formation of a uniform shell structure of Ag@TiO₂. HRTEM, IR, and XPS studies of Ag@TiO₂ synthesized using capping agent show the formation of Ag₂S coated with an amorphous layer of TiO₂. A red shift of 25 and 10 nm was observed in the surface plasmon band of silver for Ag@TiO₂ core–shell structures (compared with that of silver nanoparticles) synthesized using titanium hydroxyacylate and titanium isopropoxide, respectively. The presence of capping agent (2-mercaptoethanol) masks the surface plasmon peak. Photoluminescence studies show an increase in the emission intensity for the core–shell structures when compared to that of TiO₂ nanoparticles.     

Green synthesis of silver nanoparticle by <Emphasis Type="Italic">Penicillium purpurogenum</Emphasis> NPMF: the process and optimization

An eco-friendly microbial method for synthesis of silver colloid solution with antimicrobial activity is developed using a fungal strain of Penicillium purpurogenum NPMF. It is observed that increase in concentration of AgNO₃ increases the formation of silver nanoparticle. At 5 mM concentration highly populated polydispersed nanoparticles form. Furthermore, change in pH of the reaction mixture leads to change in shape and size of silver nanoparticles. At lower pH two peaks are observed in the absorption spectra showing polydispersity of nanoparticles. However, highly monodispersed spherical nanoparticles of 8–10 nm size form with 1 mM AgNO₃ concentration at pH 8. Antimicrobial activity of nanoparticles is demonstrated against pathogenic gram negative bacteria like Escherichia coli and Pseudomonas aeruginosa, and gram positive bacteria like Staphylococcus aureus. The antimicrobial activity of silver nanoparticles obtained at different initial pH show strong dependence on the surface area and shape of the nanoparticles.     

Methoxycarbonyl-terminated hyperbranched poly(amine-ester) as templates for synthesis of silver nanoparticles

Highly stable and spherical silver nanoparticles, stabilized by methoxycarbonyl-terminated hyperbranched poly(amine-ester) (HPAE-COOCH₃), were synthesized in water with reducing AgNO₃/HPAE-COOCH₃ using two methods, viz. NaBH₄ and ultraviolet irradiation. HPAE-COOCH₃ was found to play a key role in the formation of nanoparticles. UV–visible absorption, Transmission electron microscopic (TEM), and Fourier transform infrared spectroscopy (FT-IR) had been used to study the structure and characterization of the silver nanoparticles. The absorption peaks of the silver nanoparticles appear at ~420 nm in UV–visible absorption spectra; average particle size reduced by NaBH₄ is ~30 nm, which is ~10 and ~15 nm, respectively, when ultraviolet irradiation time is 12 and 24 h. FT-IR spectra confirm that there is strong interaction between silver nanoparticles and HPAE-COOCH₃. And silver nanoparticles/HPAE-COOCH₃ aqueous solution can keep stable for more than 3 months.     

Influence of electron beam irradiation on structural and optical properties of α-Ag2WO4 nanoparticles

The influence of 8 MeV electron beam irradiation on the structural and optical properties of silver tungstate (α-Ag₂WO₄) nanoparticles synthesized by chemical precipitation method was investigated. The dose dependent effect of electron irradiation was investigated by various characterization techniques such as, X-ray diffraction, scanning electron microscopy, UV–vis absorption spectroscopy, photoluminescence and Raman spectroscopy. Systematic studies confirm that electron beam irradiation induces non-stoichiometry, defects and particle size variation on α-Ag₂WO₄, which in turn results changes in optical band gap, photoluminescence spectra and Raman bands.     

Use of a silver ion selective electrode to assess mechanisms responsible for biological effects of silver nanoparticles

For a detailed analysis of the biological effects of silver nanoparticles, discrimination between effects related to the nano-scale size of the particles and effects of released silver ions is required. Silver ions are either present in the initial particle dispersion or released by the nanoparticles over time. The aim of this study is to monitor the free silver ion activity {Ag⁺} in the presence of silver nanoparticles using a silver ion selective electrode. Therefore, silver in the form of silver nanoparticles, 4.2 ± 1.4 nm and 2–30 nm in size, or silver nitrate was added to cell culture media in the absence or presence of A549 cells as a model for human type II alveolar epithelial cells. The free silver ion activity measured after the addition of silver nanoparticles was determined by the initial ionic silver content. The p {Ag⁺} values indicated that the cell culture media decrease the free silver ion activity due to binding of silver ions by constituents of the media. In the presence of A549 cells, the free silver ion activity was further reduced. The morphology of A549 cells, cultivated in DME medium containing 9.1% (v/v) FBS, was affected by adding AgNO₃ at concentrations of ≥30 μM after 24 h. In comparison, silver nanoparticles up to a concentration of 200 μM Ag did not affect cellular morphology. Our experiments indicate that the effect of silver nanoparticles is mainly mediated by silver ions. An effect of silver on cellular morphology was observed at p {Ag⁺} ≤ 9.2.     

Facile synthesis and phase control of copper chalcogenides with different morphologies

A series of stoichiometric and nonstoichiometric copper–chalcogenide nanocrystallines with different morphologies, e.g., extremely high aspect ratio nanofibers (Cu₉S₈), tubular structure (Cu _x S (x=∼1.86–1.96), nanorods (CuS, Cu₃₁S₁₆), platelets (β-CuSe, Cu₃Se₂), rope-like Cu₃Se₂, as well as spherical nanoparticles (Cu₇Se₄, Cu_2−x Se), have been successfully synthesized in 20 vol% water and 80 vol% organic solvents mixture under mild conditions. The products were characterized by various techniques, including X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), electronic diffraction (ED), and high-resolution transmission electron microscopy (HRTEM). The studies of the optical properties revealed that the copper chalcogenides have a wide absorption in the range of about 400–700 nm, with accessional IR band. Systematic studies showed that the mixture of 20 vol% water and 80 vol% organic solvents played a key role in controlling the copper chalcogenides with different morphologies and phases.     

One-step synthesis and antibacterial property of water-soluble silver nanoparticles by CGJ bio-template

In this article, a new synthetic method of nanoparticles with fresh Chinese gooseberry juice (CGJ) as bio-template was developed. One-step synthesis of highly water-soluble silver nanoparticles at room temperature without using any harmful reducing agents and special capping agent was fulfilled with this method. In the process, the products were obtained by adding AgNO₃ to CGJ, which was used as reducing agent, capping agent, and the bio-template. The products of silver nanoparticles with diameter of 10–30 nm have strong water solubility and excellent antibiotic function. With the same concentration 0.047 μg mL⁻¹, the antibacterial effect of water-soluble silver particles by fresh CGJ was 53%, whereas only 27% for silver nanoparticles synthesized using the template method of fresh onion inner squama coat (OISC). The excellent water solubility of the products would enable them have better applications in the bio-medical field. The synthetic method would also have potential application in preparing other highly water-soluble particles, because of its simple apparatus, high yield, mild conditions, and facile operation.     

Fusarium solani: a novel biological agent for the extracellular synthesis of silver nanoparticles

We report extracellular biosynthesis of silver nanoparticles by Fusarium solani (USM-3799), a phytopathogen causing disease in onion, when challenged with 1 mM silver nitrate (AgNO₃). The formation of nanoparticles was characterized by visual observation followed by UV–Vis spectrophotometric analysis, which showed a peak at about 420 nm, which is very specific for silver nanoparticles. Further analysis carried out by Fourier Transform Infrared Spectroscopy (FTIR), provides evidence for the presence of proteins as capping agent, which helps in increasing the stability of the synthesized silver nanoparticles. Transmission Electron Microscopy (TEM) investigations confirmed that silver nanoparticles were formed. The synthesized silver nanoparticles were found to be polydispersed, spherical in the range of 5–35 nm with average diameter of 16.23 nm. Extracellular synthesis of nanoparticles could be highly advantageous from the point of view of synthesis in large quantities and easy downstream processing.     

Metal-polymer composite films based on polyacrylonitrile and silver nanoparticles. Preparation and properties

The structures consisting of silver nanoparticles and polyacrylonitrile (PAN) are synthesized by the photopolymerization method yielding a homogeneous dispersion and a small size spread of nanoinclusions in PAN matrices, which is observed in images of transmission electron microscopy. The optical properties of the nanocomposites are studied to depend upon conditions of their obtaining. The minimum in the transmission spectra in a wavelength region of 430 nm, which is attributed to the surface plasmon resonance of silver nanoparticles, is found. The absorption peaks in the infrared range are observed at ∼820 and ∼1110 cm⁻¹ for the silver nitrate (AgNO₃) and the photoinitiator, respectively.     

Highly bacterial resistant silver nanoparticles: synthesis and antibacterial activities

In this article, we describe a simple one-pot rapid synthesis route to produce uniform silver nanoparticles by thermal reduction of AgNO₃ using oleylamine as reducing and capping agent. To enhance the dispersal ability of as-synthesized hydrophobic silver nanoparticles in water, while maintaining their unique properties, a facile phase transfer mechanism has been developed using biocompatible block co-polymer pluronic F-127. Formation of silver nanoparticles is confirmed by X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV–vis spectroscopy. Hydrodynamic size and its distribution are obtained from dynamic light scattering (DLS). Hydrodynamic size and size distribution of as-synthesized and phase transferred silver nanoparticles are 8.2 ± 1.5 nm (σ = 18.3%) and 31.1 ± 4.5 nm (σ = 14.5%), respectively. Antimicrobial activities of hydrophilic silver nanoparticles is tested against two Gram positive (Bacillus megaterium and Staphylococcus aureus), and three Gram negative (Escherichia coli, Proteus vulgaris and Shigella sonnei) bacteria. Minimum inhibitory concentration (MIC) values obtained in the present study for the tested microorganisms are found much better than those reported for commercially available antibacterial agents.     

A simple route to prepare stable hydroxyapatite nanoparticles suspension

A simple ultrasound assisted precipitation method with addition of glycosaminoglycans (GAGs) is proposed to prepare stable hydroxyapatite (HAP) nanoparticles suspension from the mixture of Ca(H₂PO₄)₂ solution and Ca(OH)₂ solution. The product was characterized by XRD, FT-IR, TEM, HRTEM and particle size, and zeta potential analyzer. TEM observation shows that the suspension is composed of 10–20 nm × 20–50 nm short rod-like and 10–30 nm similar spherical HAP nanoparticles. The number-averaged particle size of stable suspension is about 30 nm between 11.6 and 110.5 nm and the zeta potential is −60.9 mV. The increase of stability of HAP nanoparticles suspension mainly depends on the electrostatic effect and steric effect of GAGs. The HAP nanoparticles can be easily transported into the cancer cells and exhibit good potential as gene or drug carrier system.     

Nonlinear optical properties of nanometer-size silver composite azobenzene containing polydiacetylene film

Diacetylene monomer containing p-nitrophenyl azobenzene moiety (NADA) was synthesized. Silver nanoparticles with different concentrations were adulterated in the above polymerized NADA (PNADA) films and the third-order nonlinear optical properties were investigated in detail. UV–vis spectra and transmission electron microscopy were used to confirm the formation of PNADA/Ag nanocomposite films. The silver nanoparticles (average size of 10 nm) were well dispersed in the polymer films. The value of the nonlinear refractive index n ₂ for PNADA films (8.48×10⁻¹⁵ cm²/W) was much higher than that of pure polydiacetylene films. Further, the introduction of silver nanoparticles into the PNADA polymer films led to the further enhancement of nonlinear optical properties. The maximum value of n ₂ for PNADA/Ag nanocomposite films could be 11.6×10⁻¹⁵ cm²/W. This enhancement should be ascribed to the surface plasmon resonance of silver nanoparticles.     

Processes in resonant domains of metal nanoparticle aggregates and optical nonlinearity of aggregates in pulsed laser fields

Optical nonlinearities in aggregates of nanoparticles formed in silver hydrosols (SHs) are studied under pico- and nanosecond pulsed laser excitation. The dependence of the nonlinear refractive index n ₂ on the degree of hydrosol aggregation is studied experimentally at the wavelength λ=1.064 μm. It is found that n ₂ changes sign when the degree of hydrosol aggregation is increased. Various physical effects occurring in resonant domains of the aggregates are analyzed using a simple physical model of two bound silver nanoparticles. The theory takes into account thermal, elastic, electrostatic, and light-induced effects. Experimental results are discussed in the context of this theory.     

Surface-functionalization of spherical silver nanoparticles with macrocyclic polyammonium cations and their potential for sensing phosphates

The synthesis of aqueous dispersion of spherical, underivatized silver nanoparticles (Ag-NPs) stabilized by macrocyclic polyammonium chlorides (MCPAC), [28]ane-(NH₂ ⁺)₆O₂·6Cl⁻ (28-MCPAC) and [32]ane-(NH₂ ⁺)₈·8Cl⁻ (32-MCPAC), which are evidently anion receptors, is reported. As-synthesized Ag-NPs are characterized by UV-vis spectroscopy and transmission electron microscopy (TEM). The 28/32-MCPAC-stabilized Ag-NPs show the surface plasmon band around 400 nm. The TEM-images show that the particles are spherical and well-dispersed. By tuning the 28/32-MCPAC:Ag-OAc (silver acetate) ratio, nanoparticles with different core diameters ranging from 13 to 8 nm for 28-MCPAC and from 10 to 6 nm for 32-MCPAC can be obtained. The advantage of using MCPAC as stabilizers is that they make the particles functionalized for sensing anions. Thus, the potential of the as-synthesized Ag-NPs for sensing phosphates: H₂PO₄ ⁻ (monobasic phosphate, MBP), HPO₄ ²⁻ (dibasic phosphate, DBP) and PO₄ ³⁻ (tribasic phosphate, TBP) is investigated spectroscopically. Interaction of phosphate ions with macrocyclic polyammonium cations makes the Ag-NPs bare, leading agglomeration. The phosphate-assisted agglomeration of 32-MCPAC-Ag-NPs follow the order TBP > DBP ≫ MBP. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Preparation and characterization of polyindole–ZnO composite polymer electrolyte with LiClO<Subscript>4</Subscript>

This paper describes the preparation and conductivity studies of polyindole–ZnO composite polymer electrolyte (CPE) with LiClO₄. Polyindole–ZnO-based polymer nanocomposites were prepared by chemical method and characterized by XRD, infrared (IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The IR spectrum confirms the intermolecular interaction between polyindole and ZnO. The significant spectral changes of polyindole and ZnO nancomposites reveal the strong interaction between polyindole and ZnO nanoparticles. The structural morphologies of the ZnO, polyindole, and polyindole–ZnO are obtained from SEM. The TEM image of polyindole nanocomposite shows that ZnO is embedded in polyindole matrix. An enhanced conductivity of 4.405 × 10⁻⁷ S cm⁻¹ at 50 °C for the CPE was determined from impedance studies.     

Silvernanotherapy on the viral borne disease of silkworm <Emphasis Type="Italic">Bombyx mori</Emphasis> L.

Antiviral assays of chemically and biologically synthesized silver nanoparticles were made against BmNPV (Bombyx mori Nuclear Polyhedrosis Virus). Reduction of silver ions by sodium citrate and Spirulina platensis led to the formation of spherical silver nanoparticles of 40–60 and 7–16 nm size. Single cell protein (Spirulina platensis)-synthesized silver nanoparticles showed the strongest antiviral activity. Immunological studies made on the silkworm Bombyx mori disclosed that a significant increase in the total hemocyte count and differential hemocyte count due to S. platensis-synthesized silver nanoparticles supplementation. Improvement in the defense mechanism was noticed from the strengthened peritrophic membrane of the digestive tract and the increased total protein. Overall, the results presented illustrate that single cell protein-synthesized silver nanoparticles supplementation is effective in controlling viral-borne diseases of the silkworm.     

Synthesis and characterization of polyhedral and quasi-sphere non-polyhedral Pt nanoparticles: effects of their various surface morphologies and sizes on electrocatalytic activity for fuel cell applications

In this article, polyhedral and non-polyhedral Pt nanoparticles were prepared by modified polyol method using AgNO₃ as a good structure-modifying agent. Their TEM and HRTEM images showed the particle size in the range of 8–16 nm for both the above cases. The structures and properties of the surfaces of Pt nanoparticles were investigated through cyclic voltammetry in dilute perchloric acid (HClO₄) electrolyte solution. A comparison of the electrocatalytic property in methanol electrooxidation was made. Here, the effects of polyhedral and non-polyhedral morphologies on their catalytic properties were studied. The results revealed that the special catalytic activity of quasi-sphere non-polyhedral Pt nanoparticles is higher than that of polyhedral Pt nanoparticles. In addition, Pt nanoparticles of un-sharp and quasi-sphere morphologies exhibit the tolerance to poisoning species better than that of Pt nanoparticles of sharp and polyhedral morphologies due to the various morphologies of the catalyst surfaces in the chronoamperometric plots. Therefore, these experimental evidences showed the morphology-dependent catalytic property according to the various morphologies and complexity of their catalyst surfaces.