Synthesis,molecular structure and reactivity of new π-conjugated diyne with ferrocenyl and phenyl units

New π-conjugated butadiynyl ligand FcC(CH₃)₂Fc′–CC–CC–Ph (L₁) has been synthesized and its reaction with Co₂(CO)₈ has been studied. New clusters [FcC(CH₃)₂Fc′–CC–CC–Ph][Co₂(CO)₆]_n [(1): n = 1; (2): n = 2] and [Fc–CC–CC–Ph][Co₂(CO)₆]_n [(3): n =  1; (4): n = 2] were obtained by the reaction of ligands FcC(CH₃)₂Fc′–CC–CC–Ph (L₁) and Fc–CC–CC–Ph (L₂) with Co₂(CO)₈ respectively and the composition and structure of the clusters and ligands have been characterized by elemental analysis, FTIR, ¹H and ¹³C NMR and MS. The crystal structures of compounds L₁, L₂, 2 and 4 have been determined by X-ray single crystal analysis.     

Reaction of the RuTp(PR3)Cl fragment with alkynols: Formation of carbene,vinylidene, allenylidene,and carbyne complexes

The reaction of RuTp(COD)Cl (1) with PR₃ (PR₃ = PPh₂ⁱPr, PⁱPr₃, PPh₃) and propargylic alcohols HCCCPh₂OH, HCCCFc₂OH (Fc = ferrocenyl), and HCCC(Ph)MeOH has been studied.In the case of PR₃ = PPh₂ⁱPr, PⁱPr₃ and HCCCPh₂OH, the 3-hydroxyvinylidene complexes RuTp(PPh₂ⁱPr)(CCHC(Ph)₂OH)Cl (2a) and RuTp(PⁱPr₃)(CCHC(Ph₂)OH)Cl (2b) were isolated.With PR₃ = PPh₂ⁱPr and HCCCFc₂OH as well as with PR₃ = PPh₃ and HCCCPh₂OH dehydration takes place affording the allenylidene complexes RuTp(PPh₂ⁱPr)(CCCFc₂)Cl (3b) and RuTp(PPh₃)(CCCPh₂)Cl (3c).Similarly, with PPh₂ⁱPr and HCCC(Ph)MeOH rapid elimination of water results in the formation of the vinylvinylidene complex RuTp(PPh₂ⁱPr)(CCHC(Ph)CH₂)Cl (4).In contrast to the reactions of the RuTp(PR₃)Cl fragment with propargylic alcohols, with HCC(CH₂)_nOH (n = 2, 3, 4, 5) six-, and seven-membered cyclic oxycarbene complexes RuTp(PR₃)(C₄H₆O)Cl (5), RuTp(PR₃)(C₅H₈O)Cl (6), and RuTp(PR₃)(C₆H₁₀O)Cl (7) are obtained. On the other hand, with 1-ethynylcyclohexanol the vinylvinylidene complex RuTp(PPh₂ⁱPr)(CCHC₆H₉)Cl (8) is formed. The reaction of the allenylidene complexes 3a–c with acid has been investigated. Addition of CF₃COOH to a solution of 3a–c resulted in the reversible formation of the novel RuTp vinylcarbyne complexes [RuTp(PPh₂ⁱPr)(C–CHCPh₂)Cl]⁺ (9a), [RuTp(PPh₂ⁱPr)(C–CHCFc₂)Cl]⁺ (9b), and [RuTp(PPh₃)(C–CHCPh₂)Cl]⁺ (9c). The structures of 3a, 3b, and 5b have been determined by X-ray crystallography.     

Concentration dependent Raman study of 1,4-diethynylbenzene on gold nanoparticle surfaces

Concentration dependent adsorption behaviors of 1,4-diethynylbenzene (DEB) on gold nanoparticle surfaces have been investigated by means of surface-enhanced Raman scattering (SERS). The spectral features including the multiple peaks in the ν(CC)_bound stretching region were found to vary as the bulk concentration of DEB in gold nanoparticles. At a low concentration of 10⁻⁶ M, only the multiple ν(CC)_bound band was conspicuous at ∼2000 cm⁻¹ and the free CC stretching band was barely detected in the SERS spectra. When the bulk concentration was increased, the ν(CC)_free band became prominent at ∼2104 cm⁻¹. These splitting bands may provide the evidence that DEB is adsorbed on gold mainly through one of the two acetylene groups with the other CC groups being pendent with respect to the gold surface. Ab initio density functional theory (DFT) calculations of DEB were performed to check the vibrational assignment.     

Understanding the reactivity of [WNAr(CH2tBu)2(CHtBu)] (Ar = 2,6-iPrC6H3) with silica partially dehydroxylated at low temperatures through a combined use of molecular and surface organometallic chemistry

Reaction of [WNAr(CH₂tBu)₂(CHtBu)] (Ar = 2,6-iPrC₆H₃) with silica partially dehydoxylated at 200 °C does not lead only to the expected bisgrafted [(SiO)₂WNAr(CHtBu)] species, but also surface reaction intermediates such as [(SiO)₂WNAr(CH₂tBu)₂]. All these species were characterized by infrared spectroscopy, 1D and 2D solid state NMR, elemental analysis and molecular models obtained by using silsesquioxanes. While a mixture of several surface species, the resulting material displays high activity in the olefin metathesis.     

Further molecular engineering of diruthenium-(2-anilinopyridinate) alkynyl compounds through ligand design

A modified ap ligand, 2-(3,5-dimethoxyanilino)pyridine (HDiMeOap) and its diruthenium compounds Ru₂(DiMeOap)₄Cl (1), Ru₂(DiMeOap)₄(CCCCSiMe₃) (2) and Ru₂(DiMeOap)₄(CCCCSiMe₃)₂ (3) were prepared and characterized. New compounds Ru₂(MeOap)₄(CCCCSiMe₃)_x (x = 1, 4; 2, 5; MeOap is 2-(3-methoxyanilino)pyridinate) were prepared from the previously reported Ru₂(MeOap)₄Cl. In addition, two related diruthenium compounds containing ferrocenyl acetylide ligand, Ru₂(MeOap)₄(CCFc) (6) and Ru₂(ap)₄(CCCCFc) (7), were synthesized. Molecular structures of compounds 1, 2, 6 and 7 were established using single crystal X-ray diffraction study.     

Diruthenium compounds of heterocycle-containing acetylides

Novel diruthenium compounds containing heterocycle-acetylide are reported here. Ru₂(Y-DMBA)₄(CC-2-pyrimidine)₂ were prepared from the reaction between Ru₂(Y-DMBA)₄(NO₃)₂ and HCC-2-pyrimidine in the presence of Et₂NH, where Y-DMBA is either N,N′-dimethylbenzamidinate (DMBA, Y = H) or N,N′-dimethyl-(3-methoxy)benzamidinate (Y = 3-CH₃O). Ru₂(Y-DMBA)₄(CC-4-N-methylpyridinium)₂ were obtained through the methylation of known compounds Ru₂(Y-DMBA)₄(CC-4-pyridine)₂. Both the structural and voltammetric data are consistent with the heterocycles being moderate electron acceptors.     

Organometallic complexes for nonlinear optics. 41: Syntheses and quadratic NLO properties of 4-{4-(4-nitrophenyl)diazophenyl}ethynylphenylethynyl complexes

The syntheses of [Au(CC-4-C₆H₄CC-4-C₆H₄NN-4-C₆H₄NO₂)(PPh₃)] (3), trans-[Ru(CC-4-C₆H₄-CC-4-C₆H₄NN-4-C₆H₄NO₂)Cl(dppm)₂] (4), [Ru(CC-4-C₆H₄CC-4-C₆H₄NN-4-C₆H₄NO₂)(dppe)(η-C₅Me₅)] (5), and [Ni(CC-4-C₆H₄NN-4-C₆H₄NO₂)(PPh₃)(η-C₅H₅)] (6) are reported, together with a single-crystal X-ray diffraction study of 4. Quadratic nonlinearities for 3–6 and [Ru(CC-4-C₆H₄NO₂)(dppe)(η-C₅Me₅)] (7) have been determined at 1.064 μm and 1.300 μm by the hyper-Rayleigh scattering (HRS) technique, comparison to related complexes revealing that β values increase on introduction of azo group and π-system lengthening.     

Theoretical calculations of the substituent effect on molecular properties of the RCN⋯HF hydrogen-bonded complexes with R = NH2, CH3O,CH3, OH,SH, H,Cl, F,CF3, CN and NO2

DFT calculations with B3LYP and PBE1PBE functionals and 6–311++G(d,p) basis set have been performed in order to obtain molecular geometries, binding energies and vibrational properties of the RCN?HF H-bonded complexes with R = NH₂, CH₃O, CH₃, OH, SH, H, Cl, F, CF₃, CN and NO₂. As expected, it has been verified as a red-shift of the HF stretching frequency (ν_HF), in conformity with the elongation of the bond after complexation. On the other hand, the CN stretching frequency (ν_CN) is blue-shifted and corresponds to a shortening of the bond. The binding energies (ΔE_c), including BSSE and ZPVE corrections, show a linear correlation with several structural, electronic and vibrational properties. In particular, an important linear dependence between the binding energy and the calculated dipole moment of the free RCN molecule (μ_RCN) has been found. This result suggests that μ_RCN can be a useful quantity in order to predict the ability of this fragment to form a hydrogen-bond. The IR intensities of stretching and bending modes of complexed HF acid fragment are adequately interpreted through the atomic polar tensor of the hydrogen atom in HF using the modified CCFO model for infrared intensities. The new vibrational modes arising from complexation show several interesting features.     

Preparation and characterization of cobalt-containing alcohols and diols

A series of cobalt-containing alcohols and diols were prepared and characterized. Intramolecular hydrogen-bonding was observed for the cobalt-containing diols [Co₂(CO)₆(μ-η-(HO)R₁R₂CCCCR₁R₂(OH)] (1: R₁ = CH₃, R₂ = C₂H₅; 2: R₁ = CH₃, R₂ = C₃H₇), [Co₂(CO)₆(μ-η-(HO)Ph₂CCCCPh₂(OH)] (3) and [(μ-PPh₂CH₂PPh₂)Co₂(CO)₄(μ-η-(HO)Ph₂CCCCPh₂(OH)] (4). Potentially all the four compounds could serve as chelating O,O-ligands. In principle, it is possible for compounds [(μ-PPh₂NHPPh₂)Co₂(CO)₄(μ-η-HCCCPh₂OH)] (5b), [Co₂(CO)₆(μ-η-HCCC₂H₄OH] (6) and [Co₂(CO)₆(μ-η-HCCC₃H₆OH)] (7) in their syn-conformations to behave as chelating O,N-ligands. To the best of our knowledge, compounds 5b, 6 and 7 are the first reported examples of PPh₂NHPPh₂-bridged dicobalt complexes.     

Molecular structure of caffeine as determined by gas electron diffraction aided by theoretical calculations

The molecular structure of caffeine (3,7-dihydro-1,3,7-trimethyl-1H-purine-2,6-dione) was determined by means of gas electron diffraction. The nozzle temperature was 185 °C. The results of MP2 and B3LYP calculations with the 6-31G⁷ basis set were used as supporting information. These calculations predicted that caffeine has only one conformer and some of the methyl groups perform low frequency internal rotation. The electron diffraction data were analyzed on this basis. The determined structural parameters (r_g and ∠_α) of caffeine are as follows: <r(NC)_ring> = 1.382(3) Å; r(CC) = 1.382(←) Å; r(CC) = 1.446(18) Å; r(CN) = 1.297(11) Å; <r(NC_methyl)> = 1.459(13) Å; <r(CO)> = 1.206(5) Å; <r(CH)> = 1.085(11) Å; ∠N₁C₂N₃ = 116.5(11)°; ∠N₃C₄C₅ = 121. 5(13)°; ∠C₄C₅C₆ = 122.9(10)°; ∠C₄C₅N₇ = 104.7(14)°; ∠N₉–C₄=C₅ = 111.6(10)°; <∠NCH_methyl> = 108.5(28)°. Angle brackets denote average values; parenthesized values are the estimated limits of error (3σ) referring to the last significant digit; left arrow in parentheses means that this parameter is bound to the preceding one.     

Nitrogen- and oxygen-bridged bidentate phosphaalkene ligands

An overview is given on synthesis and structures of new bidentate phosphaalkene ligands [(RMe₂Si)₂CP]₂E (E = O, NR, N^?) and (RMe₂Si)₂CPN(R′)PR′′₂. Exceptional properties of these ligands, extending beyond predictable properties of phosphaalkenes are: (i) the NSi bond cleavage of [(iPrMe₂Si)₂CP]₂NSiMe₃ with Au^I and Rh^I chloro complexes under mild conditions leading to binuclear complexes of the 6π-delocalised imidobisphosphaalkene anion [(iPrMe₂Si)₂CP]₂N^?, and (ii) the chlorotropic formation of molecular 1:2 Pd^II and Pt^II metallochloroylid complexes with novel ylid-type ligands [(RMe₂Si)₂CP(Cl)N(R)PR₂]^?, and the transformation of a P-platina-P-chloroylid complex into a C-platina phosphaalkene by intramolecular chlorosilane elimination. Properties of the heavier congeners [(RMe₂Si)₂CP]₂E (E = S, Se, Te, PR, P^?, As^?) and (RMe₂Si)₂CPEPR′′₂ (E = S, Se, Te) are also described.     

Olefin metathesis for metal incorporation: Preparation of conjugated ruthenium-containing complexes and polymers

Olefin Metathesis for Metal Incorporation (OMMI) was used for the stoichiometric attachment of ruthenium to both small and large polyenes. The dinuclear complexes (PCy₃)₂C1₂RuCH(CHCH)_nCHRu(PCy₃)₂Cl₂ (n = 1, 2), were prepared by reacting 2 equiv. of the Grubbs first-generation catalyst (PCy₃)₂C1₂Ru(CHPh)) with 1 equiv. of the appropriate polyene (1,3,5-hexatriene for n = 1 and 1,3,5,7-octatetraene for n = 2). Use of excess hexatriene led to the formation of the monoruthenium complex (PCy₃)₂C1₂RuCHCH CHCHCH₂. The mono- and di-ruthenium complexes exhibited marked differences in their spectroscopic and electrochemical properties, in addition to their Z–E isomerization rates. Nucleophilic attack of PCy₃ on the end CH₂ of the mono complex was observed, leading to both isomerization and phosphonium products. Extending the OMMI strategy to the second-generation catalyst was also done, despite the reduced initiation rate. The more reactive catalyst (H₂IMes)RuCl₂(CHPh)(3-bromopyridine)₂ allowed for ruthenium incorporation into polyacetylene, leading to the formation of polymers and oligomers with high ruthenium content.     

Cyanate ester resin/graphene nanocomposite: Curing dynamics and network formation

The curing dynamics and network formation of cyanate ester resin/graphene oxide (GO) nanocomposites were studied by means of Differential Scanning Calorimetry (DSC), Fourier Transform Infrared (FT-IR) and Raman spectroscopies. The incorporation of GO into the resin showed a strong catalytic effect on the cure of the resin, especially in the initial stages. Addition of 4 wt.% GO resulted in the decrease of curing temperature significantly about 97 °C. Activation energy of the nanocomposites also maintained at a low level till the end of the cure. The most effective catalytic behavior was observed with 1 wt.% GO. Both FT-IR and Raman spectra revealed that OH group in GO reacted with cyanate group OCN in the resin to form O(CNH)O bond in the early stages of the cure. These results could provide a low temperature curing route for cyanate ester resins with improved curing efficiency.     

Characterization,stability, and origin of natural radiation-induced defects in the biogenic calcite of Belemnitella americana from the Upper Cretaceous: An electron paramagnetic resonance study

The rostrum of Belemnitella americana (Morton) from the Marshalltown formation (Kmt, Upper Cretaceous) of the Chesapeake and Delaware Canal was investigated by electron paramagnetic resonance (EPR) spectroscopy. The rostrum composed of biogenic calcite possessed inorganic radical centers CO₂⁻, SO₂⁻, and SO₃⁻ with isotropic resonances with g values of 2.0007, 2.0057, and 2.0031, respectively. SO₃⁻ was found to also display an axially symmetric resonance typical of that seen in calcite of geologic origin with g_⊥=2.0036 and g_∥=2.0021. Mn²⁺ signals of orthorhombic symmetry and very narrow line width (∼0.1 mT) were also noted (|D|=9.3 mT (∼0.009 cm⁻¹), |E|=3.1 mT (∼0.003 cm⁻¹)). Isochronal annealing studies reveal that these inorganic radical species reside in energy traps that are significantly deeper than previously determined as revealed by their annealing temperatures: SO₂⁻ (isotropic), T^*∼340 °C; SO₃⁻ (isotropic), T^*∼230 °C; SO₃⁻ (axial), T^*∼190 °C. These data suggest that these spin centers may be used to extend the upper limit for dating purposes to times on the order of 1 Ma for SO₃⁻ (axial) and 200–300 Ma for SO₃⁻ (isotropic). Spin–spin and spin–lattice relaxation studies employing progressive microwave saturation were determined for all sulfur-based radical species and found to be consistent with the supposition of the isotropic signals existing in environments that are conducive to dynamic averaging of the g-anisotropy.     

Proton-assisted addition reactions on trimethylsilylalkynyl nitrosylrutheniums of hydrotris(pyrazolyl)borate

Incorporation of H₂O or HCl on treatment of trimethylsilylalkynyl nitrosylruthenium TpRuCl(CCSiMe₃)(NO) (1) (Tp = hydrotris(pyrazolyl)borate) with protic acid, and the dependence of its product formation on the reaction solvents, are reported. Reactions of 1 with HBF₄ or HCl (aq.) in MeOH gave rise to the mixture of the mono(ethynyl) TpRuCl(CCH)(NO) (2) and the mono(acyl) TpRuCl{C(O)CH₃}(NO) (3). The H₂O-incorporated 3 was quantitatively obtained from the reactions of 2 with HCl (aq.) in MeOH. On the other hand, reactions of 1 with HCl (aq.) in CH₂Cl₂ gave the η¹-α-chlorovinyl TpRuCl{C(Cl)CH₂}(NO) (4). In the bis(alkynyl) system TpRu(CCSiMe₃)₂(NO) (5), the similar reactivities were observed. Proton-assisted hydration of 5 afforded the bis(acyl) TpRu{C(O)CH₃}₂(NO) (6), while the HCl-treatment led to the formation of the bis(α-chlorovinyl) TpRu{C(Cl)CH₂}₂(NO) (7).     

Evaluation of heterocumulenic ferrocene derivatives for “click” chemistry type reactions

Azidoferrocene (1), 1,1′-diazidoferrocene (2) and 1,1′-diisothiocyanatoferrocene (3) were subjected to reactions from the repertoire of “click” chemistry, with a view to applications in the post-functionalisation of self-assembled monolayers. The copper-catalysed 1,3-dipolar cycloaddition of 1 and FcCCH (Fc = ferrocenyl) afforded the expected 1,2,3-triazole derivative under anhydrous and anaerobic conditions. Analogous reactions also succeeded with 2 and RCCH (R = Ph, Fc). The Staudinger reaction of 2 with 1,1′-bis(diphenylphosphanyl)ferrocene (dppf) gave the expected bis(iminophosphoranyl)ferrocene in high yield. The nucleophilic addition of 2 equiv. of NHR₂ (R = Et, iPr) to 3 afforded the corresponding thiourea derivative in quantitative yield.     

Reactions of α-phenylethynyl-trans-β-styryl complexes with isonitriles: hemi-labile alkyne coordination

Treatment of the complex [Ru{C(CCPh)CHPh}Cl(CO)(PPh₃)₂] (1) with one equivalent of CNR(R =^tBu, C₆H₃Me₂-2,6) gives [Ru{C(CCPh)CHPh}Cl(CNR)(CO)(PPh₃)₂]. Addition of a further equivalent of isonitrile and [NH₄]PF₆ leads to the salts [Ru{C(CCPh)CHPh}Cl(CNR)₂(CO)(PPh₃)₂]PF₆ and the mixed species [Ru{C(CCPh) CHPh}(CO)(CN^tBu)(CNC₆H₃Me₂-2,6)(PPh₃)₂]PF₆. The related [Ru{C(CCPh)CHPh}(CN^t(CO)₂     

Raman spectroscopic study of CuO–V2O5–P2O5–CaO glass system

In order to evidence the structural changes induced by CuO and V₂O₅ in the phosphate glass network and their modifier or former role, x(CuO·V₂O₅)(100 − x)[P₂O₅·CaO] glass system was prepared and investigated using Raman spectroscopy (0 ≤ x ≤ 40 mol%).Raman spectra of the studied glasses present the specific bands of the phosphate glasses at low concentration of transition metal (TM) ions, but at higher concentration (x > 7 mol%) a strong depolymerization of the phosphate network appears; non-bridging oxygen atoms are involved in VOP and CuOP bonds and new short units are formed. For a high concentration of V₂O₅ (x > 10 mol%) the Raman bands of V₂O₅ prevail in the spectra; this fact suggests that vanadium oxide imposes its structural units in the network acting thus as a network glass former.2D correlation analysis was also applied for the concentration-dependent Raman spectra in order to verify the assignments of the vibration modes and to find correlations in the changes induced by TM ions content. 2D correlation maps indicate a good correlation between the bands at ∼705 cm⁻¹ assigned to POP stretching vibration and at ∼1175 cm⁻¹ assigned to PO₂ groups which suggest the depolymerization of the phosphate network. The correlation between the 1270 cm⁻¹ and 930 cm⁻¹ bands also suggests that V₂O₅ oxide is responsible for PO bonds breaking and POV formation.     

Binuclear Pd(II) complexes with alkynyl ligands and functionalised tail-groups: Molecular and electronic structure studied by XPS and EXAFS

The binuclear transition metal dialkynyl bridged Pd(II) complexes trans,trans-[ClPd(PBu₃)₂–CC–C₆H₄–C₆H₄–CC–Pd(PBu₃)₂Cl] and trans,trans-[CH₃OC–S–Pd(PBu₃)₂–CC–C₆H₄–C₆H₄–CC–Pd(PBu₃)₂–S–COCH₃] were synthesized and investigated by X-ray Photoemission (XPS) and X-ray Absorption (XAS) spectroscopies. XPS measurements lead to assess that the thiolate terminal group does not affect dramatically the electronic structure of the transition metal, and as a consequence the two complexes are expected to possess analogous molecular structure. XAS data analysis suggested a square-planar geometry around the palladium center in both binuclear compounds.     

Reaction of isocyanides with iminophosphorane-based carbene ligands: Synthesis of unprecedented ketenimine–ruthenium complexes

The RuC bond of the bis(iminophosphorano)methandiide-based ruthenium(II) carbene complexes [Ru(η⁶-p-cymene)(κ²-C,N-C[P{NP(O)(OR)₂}Ph₂]₂)] (R = Et (1), Ph (2)) undergoes a C–C coupling process with isocyanides to afford ketenimine derivatives [Ru(η⁶-p-cymene)(κ³-C,C,N-C(CNR′)[P{NP(O)(OR)₂}Ph₂]₂)] (R = Et, R′ = Bz (3a), 2,6-C₆H₃Me₂ (3b), Cy (3c); R = Ph, R′ = Bz (4a), 2,6-C₆H₃Me₂ (4b), Cy (4c)). Compounds 3–4a–c represent the first examples of ketenimine–ruthenium complexes reported to date. Protonation of 3–4a with HBF₄ · Et₂O takes place selectively at the ketenimine nitrogen atom yielding the cationic derivatives [Ru(η⁶-p-cymene)(κ³-C,C,N-C(CNHBz)[P{NP(O)(OR)₂}Ph₂]₂)][BF₄] (R = Et (5a), Ph (6a)).