Effects of UVB radiation on the agarophyte Gracilaria domingensis (Rhodophyta,Gracilariales): Changes in cell organization,growth and photosynthetic performance

The effects of ultraviolet radiation-B (UVBR) in apical segments of the red macroalgae Gracilaria domingensis (Kützing) Sonder ex Dickie were examined in vitro. Over a period of 21 days, the segments were cultivated and exposed to photosynthetically active radiation (PAR) at 80 μmol photons m^?2 s^?1 and PAR + UVBR at 1.6 W m^?2 for 3 h per day. The samples were processed for electron microscopy, as well as histochemical analysis, and growth rate, photosynthetic pigment contents and photosynthetic performance were measured. Toluidine Blue reaction showed metachromatic granulations in vacuole and lenticular thickness, while Coomassie Brilliant Blue showed a higher concentration of cytoplasmic organelles, and Periodic Acid Schiff stain showed an increase in the number of floridean starch grains. UVBR also caused changes in the ultrastructure of cortical and subcortical cells, which included an increased number of plastoglobuli, changes in mitochondrial organization, destruction of chloroplast internal organization, and the disappearance of phycobilisomes. The algae cultivated under PAR-only showed growth rates of 6.0% day^?1, while algae exposed to PAR + UVBR grew only 2.8% day^?1. Compared with algae cultivated with PAR-only, the contents of photosynthetic pigments, including chlorophyll a, phycoerythrin, phycocyanin and allophycocyanin, decreased after exposure to PAR + UVBR, and significant differences were observed. Finally, analysis of these four photosynthetic parameters also showed reduction after exposure to PAR + UVBR: maximum photosynthetic rate, photosynthetic efficiency, photoinhibition and relative electron transport rate. Taken together, these findings strongly suggested that UVBR negatively affects the agarophyte G. domingensis.     

Magnetophoretic concentrating of diamagnetic bio-particles and formation of liquid-crystalline chromatin structures

The packing of chromatin during the self-assembly was modeled with a diamagnetic compression achieved under a gradient magnetic separation (magnetophoresis). Nucleoprotein granules separated from cultivated connective tissue and nuclei of chicken red blood cells formed various chromatin mesophases and chiral supra-molecular structures. The applied magnetic pressure accelerated mesophase formations due to the diamagnetic alignment and the concentrating of nucleosome nanoparticles and aggregates (germs) in gradient magnetic fields. Under various magnetic force parameters (H · grad H) ∼ 10⁵–10¹¹ Oe²/cm the different mesophases emerged. Chicken nucleated red blood cells were found to be a convenient model to study the chromatin condensation under influences including electromagnetic factors.     

Effect of high intensity ultrasound on the fermentation profile of Lactobacillus sakei in a meat model system

The objective of this study was to investigate the efficacy of high intensity ultrasound on the fermentation profile of Lactobacillus sakei in a meat model system. Ultrasound power level (0–68.5 W) and sonication time (0–9 min) at 20 °C were assessed against the growth of L. sakei using a Microplate reader over a period of 24 h. The L. sakei growth data showed a good fit with the Gompertz model (R² > 0.90; SE < 0.042). Second order polynomial models demonstrated the effect of ultrasonic power and sonication time on the specific growth rate (SGR, μ, h⁻¹) and lag phase (λ, h). A higher SGR and a shorter lag phase were observed at low power (2.99 W for 5 min) compared to control. Conversely, a decrease (p < 0.05) in SGR with an increase in lag phase was observed with an increase in ultrasonic power level. Cell-free extracts obtained after 24 h fermentation of ultrasound treated samples showed antimicrobial activity against Staphylococcus aureus, Listeria monocytogenes, Escherichia coli and Salmonella typhimurium at lower concentrations compared to control. No significant difference (p < 0.05) among treatments was observed for lactic acid content after a 24 h fermentation period. This study showed that both stimulation and retardation of L. sakei is possible, depending on the ultrasonic power and sonication time employed. Hence, fermentation process involving probiotics to develop functional food products can be tailored by selection of ultrasound processing parameters.     

Radiation stability of M1 − xPrxF2 + x (M = Ca,Sr, Ba) crystals

The radiation stability of the mixed crystals M_1 ? xR_xF_2 + x (M = Ca, Sr, Ba) depends on types of the alkaline-earth and rare-earth ions. Different to Eu- and Ce-containing systems, M_1 ? xPr_xF_2 + x solid solutions have a low radiation resistance, which may be associated with hole trapping on praseodymium ion according to the reaction Pr³⁺ → Pr⁴⁺ which is typical for praseodymium. The coloration efficiency of M_1 ? xPr_xF_2 + x crystals grows in the row Ca → Sr → Ba, which is explained satisfactorily within the model of rare-earth clusters, the structure of which is determined by the ratio of the base alkaline-earth cation to the praseodymium ion radii.     

Ultrastructural analysis of the low level laser therapy effects on the lesioned anterior tibial muscle in the Gerbil

Low level laser therapy (LLLT) is known for its positive results but studies on the biological and biomodulator characteristics of the effects produced in the skeletal muscle are still lacking. In this study the effects of two laser dosages, 5 or 10 J/cm², on the lesioned tibial muscle were compared. Gerbils previously lesioned by 100 g load impact were divided into three groups: GI (n = 5) controls, lesion non-irradiated; GII (n = 5), lesion irradiated with 5 J/cm² and GIII (n = 5), lesion irradiated with 10 J/cm², and treated for 7 consecutive days with a laser He–Ne (λ = 633 nm). After intracardiac perfusion, the muscles were dissected and reduced to small fragments, post-fixed in 1% osmium tetroxide, dehydrated in increasing alcohol concentrations, treated with propylene oxide and embedded in Spurr resin at 60 °C. Ultrafine cuts examined on a transmission electron microscope (Jeol 1010) revealed in the control GI group a large number of altered muscle fibers with degenerating mitochondria, intercellular substance containing degenerating cell fragments and budding blood capillaries with underdeveloped endothelial cells. However, groups GII and GIII showed muscle fibers with few altered myofibrils, regularly contoured mitochondria, ample intermembrane spaces and dilated mitochondrial crests. The clean intercellular substance showed numerous collagen fibers and capillaries with multiple abluminal processes, intraluminal protrusions and several pinocytic vesicles in endothelial cells. It was concluded that laser dosages of 5 or 10 J/cm² delivered by laser He–Ne (λ = 633 nm) during 7 consecutive days increase mitochondrial activity in muscular fibers, activate fibroblasts and macrophages and stimulate angiogenesis, thus suggesting effectivity of laser therapy under these experimental conditions.     

Exposure to indoor radon and natural gamma radiation in public workplaces in north-western Greece

Measurements of indoor radon levels and gamma dose rates were performed in 42 workplaces in Ioannina, north-western Greece. Radon concentrations followed a log-normal distribution with an arithmetic mean of 95 ± 51 Bq m^?3. In all cases, radon levels were below 400 Bq m^?3, which is the action level implemented by the Greek Regulation for Radiation Protection, in accordance with the European Commission recommendation. Comparing summer and winter measurements, no statistically significant seasonal variation was established. However, radon concentrations measured in basement and ground floor workplaces were significantly higher (p < 0.01) than those measured in the first and upper floors. Annual effective dose rates from inhalation of radon and its decay products were estimated to be in the range from 0.13 to 1.36 mSv y^?1 with a mean value of 0.62 mSv y^?1. Indoor exposure to natural gamma radiation entailed an average effective dose rate of 0.13 mSv y^?1, of which approximately 62% was due to terrestrial and the rest due to cosmic sources. The reported data contribute to the assessment of radon distribution and dose estimate at the national level.     

Optical nutation in a magnetized semiconductor quantum well structure

Using the semiclassical coherent radiation—semiconductor interaction model, optical nutation has been analysed in aGaAs / Al_xGa_1 − xAs quantum well structure (QWS) assumed to be immersed in a moderately strong magnetic field and irradiated by a not-too-strong near band gap resonant femtosecond pulsed Ti–sapphire laser. The finite potential well depth of the QWS and the Wannier–Mott excitonic structure of the crystal absorption edge is taken into account. The excitation intensity is assumed to be below the Mott transition where the various many-body effects have been neglected with adequate reasoning. Numerical analysis made for a GaAs quantum well of thickness  ∼  100 Åand the confining layers ofAl_xGa_1 − xAs withx =  0.3 at intensity I ≤  5  ×  10⁶Wcm ^− 2reveals that the real and imaginary parts of the transient complex-induced polarization are enhanced with an increase in the magnetic field and their ringing behaviour confirms the occurrence of optical nutation in the QWS.     

A comparative study of the Ruddlesden-Popper series,Lan+1NinO3n+1 (n = 1, 2 and 3), for solid-oxide fuel-cell cathode applications

A comparative investigation of the much-studied La₂NiO_4+δ (n = 1) phase and the higher-order Ruddlesden-Popper phases, La_n+1Ni_nO_3n+1 (n = 2 and 3), has been undertaken to determine their suitability as cathodes for intermediate-temperature solid-oxide fuel cells. As n is increased, a structural phase transition is observed from tetragonal I4/mmm in the hyperstoichiometric La₂NiO_4.15 (n = 1) to orthorhombic Fmmm in the oxygen-deficient phases, La₃Ni₂O_6.95 (n = 2) and La₄Ni₃O_9.78 (n = 3). High temperature d.c. electrical conductivity measurements reveal a dramatic increase in overall values from n = 1, 2 to 3 with metallic behavior observed for La₄Ni₃O_9.78. Impedance spectroscopy measurements on symmetrical cells with La_0.9Sr_0.10Ga_0.80Mg_0.20O_3−δ (LSGM-9182) as the electrolyte show a systematic improvement in the electrode performance from La₂NiO_4.15 to La₄Ni₃O_9.78 with ∼ 1 Ω cm² observed at 1073 K for the latter. Long-term thermal stability tests show no impurity formation when La₃Ni₂O_6.95 and La₄Ni₃O_9.78 are heated at 1123 K for 2 weeks in air, in contrast to previously reported data for La₂NiO_4.15. The relative thermal expansion coefficients of La₃Ni₂O_6.95 and La₄Ni₃O_9.78 were found to be similar at ∼ 13.2 × 10^− 6 K^− 1 from 348 K to 1173 K in air compared to 13.8 × 10^− 6 K^− 1 for La₂NiO_4.15. Taken together, these observations suggest favourable use for the n = 2 and 3 phases as cathodes in intermediate-temperature solid-oxide fuel cells when compared to the much-studied La₂NiO_4+δ (n = 1) phase.     

Effects of phonophoresis with Arnica montana onto acute inflammatory process in rat skeletal muscles: An experimental study

This study aimed at verifying the effects of phonophoresis associated with Arnica montana on the acute phase of an inflammatory muscle lesion. Forty Wistar male rats (300 ± 50 g), of which the Tibialis Anterior muscle was surgically lesioned, were divided into four groups (n = 10 each): control group received no treatment; the ultrasound group (US) was treated in pulsed mode with 1-MHz frequency, 0.5 W/cm² intensity (spatial and temporal average – SATA), duty cycle of 1:2 (2 ms on, 4 ms off, 50%), time of application 3 min per session, one session per day, for 3 days; the phonophoresis or ultrasound plus arnica (US+A) group was treated with arnica with the same US parameters plus arnica gel; and the arnica group (A) was submitted to massage with arnica gel, also for 3 min, once a day, for 3 days. Treatment started 24 h after the surgical lesion. On the 4th day after lesion creation, animals were sacrificed and sections of the lesioned, inflamed muscle were removed for quantitative (mononuclear and polymorphonuclear cell count) and qualitative histological analysis. Collected data from the 4 groups were statistically analyzed and the significance level set at p < 0.05. Results show higher mononuclear cell density in all three treated groups with no significant difference between them, but values were significantly different (p < 0.0001) when compared to control group’s. As to polymorphonuclear cell density, significant differences were found between control group (p = 0.0134) and US, US+A and A groups; the arnica group presented lesser density of polymorphonuclear cells when compared (p = 0.0134) to the other groups. No significant difference was found between US and US+A groups. While the massage with arnica gel proved to be an effective anti-inflammatory on acute muscle lesion in topic use, these results point to ineffectiveness of Arnica montana phonophoresis, US having seemingly checked or minimized its anti-inflammatory effect.     

Thermodynamics and kinetics of CO and benzene adsorption on Pt(111) studied with pulsed molecular beams and microcalorimetry

The adsorption and desorption of the system CO/Pt(111) and C₆H₆/Pt(111) at 300 K has been investigated with a pulsed molecular beam method in combination with a microcalorimeter. For benzene the sticking probability has been measured in dependence of the coverage θ. For coverages θ > 0.8 transient adsorption is observed. From an analysis of the time-dependence of the molecular beam pulses the rate constant for desorption is determined to be 5.6 s^? 1. With a precursor-mediated kinetic adsorption model this allows to obtain also the hopping rate constant of 95.5 s^? 1. The measured adsorption enthalpies could be best described by (199 ? 77θ ? 51θ²) kJ/mol, in good agreement with the literature values. For CO on Pt(111) also transient adsorption has been observed for θ > 0.95 at 300 K. The kinetic analysis yields rate constants for desorption and hopping of 20 s^?1 and 51 s^?1, respectively. The heats of adsorption show a linear dependence on coverage (131 ? 38θ) kJ/mol between 0 ≤ θ ≤ 0.3, which is consistent with the desorption data from the literature. For higher coverage (up to θ = 0.9ML) a slope of ?63 kJ/mol describes the decrease of the differential heat of adsorption best. This result is only compatible with desorption experiments, if the pre-exponential factor decreases strongly at higher coverage. We found good agreement with recent quantum chemical calculations made for (θ = 0.5ML).     

Improving La0.6Sr0.4Co0.2Fe0.8O3 − δ cathode performance by infiltration of a Sm0.5Sr0.5CoO3 − δ coating

La_xSr_1 ? xCo_yFe_1 ? yO_3 ? δ (LSCF) represents one of the state-of-the-art cathode materials for solid oxide fuel cells (SOFCs) due primarily to its high ionic and electronic conductivity. In this study, a one-step infiltration process has been developed to deposit, on the surface of a porous LSCF cathode, a thin film (50–100 nm) of Sm_0.5Sr_0.5CoO_3 ? δ (SSC), which is catalytically more active for oxygen reduction. Electrochemical impedance spectroscopy reveals that the SSC coating has dramatically reduced the polarization resistance of the cathode, achieving area-specific resistances of 0.036 Ω cm² and 0.688 Ω cm² at 750 °C and 550 °C, respectively. It has also maintained the stability of LSCF cathodes. In particular, the peak power densities are increased by ~ 22% upon the infiltration of SSC onto the porous LSCF cathodes of our best performing cells. These results demonstrate that a conductive backbone (e.g., LSCF) coated with a catalytic film (e.g., SSC) is an attractive approach to achieving an active and stable SOFC cathode for low-temperature solid oxide fuel cells.     

Mechanoluminescence characterisation of γ-irradiated (KNa)Br:Ce3+ phosphor

The mechanoluminescence (ML) of γ-irradiated coloured powder of (KNa)Br:Ce(0.1–10 mol%) phosphor is reported in this paper. The samples are prepared by wet chemical method. The ML intensities are found to be dependent on concentrations of Ce³⁺ ion and γ-rays radiation dose. The variation of peak ML intensity of (KNa)Br:Ce(0.5 mol%) with different γ-rays dose is found as linear up to 2.5 kGy high dose from 0.08 kGy, whereas for the KBr:Ce(0.5 mol%) and NaBr:Ce(0.5 mol%) samples the ML intensities increases sublinearly. The prepared sample shows minimum fading in ML intensity. The ML characterisation shows the good linearity, less fading and simple ML glow curve structure, thus the prepared material may be useful for radiation dosimetry.     

Numerical and perturbative computations of solitary waves of the Benjamin–Ono equation with higher order nonlinearity using Christov rational basis functions

Computation of solitons of the cubically-nonlinear Benjamin–Ono equation is challenging. First, the equation contains the Hilbert transform, a nonlocal integral operator. Second, its solitary waves decay only as O(1/∣x∣²). To solve the integro-differential equation for waves traveling at a phase speed c, we introduced the artificial homotopy H(u_XX) ? c u + (1 ? δ)u² + δu³ = 0, δ ∈ [0, 1] and solved it in two ways. The first was continuation in the homotopy parameter δ, marching from the known Benjamin–Ono soliton for δ = 0 to the cubically-nonlinear soliton at δ = 1. The second strategy was to bypass continuation by numerically computing perturbation series in δ and forming Padé approximants to obtain a very accurate approximation at δ = 1. To further minimize computations, we derived an elementary theorem to reduce the two-parameter soliton family to a parameter-free function, the soliton symmetric about the origin with unit phase speed. Solitons for higher order Benjamin–Ono equations are also computed and compared to their Korteweg–deVries counterparts. All computations applied the pseudospectral method with a basis of rational orthogonal functions invented by Christov, which are eigenfunctions of the Hilbert transform.     

Synchrotron quantification of ultrasound cavitation and bubble dynamics in Al–10Cu melts

Knowledge of the kinetics of gas bubble formation and evolution under cavitation conditions in molten alloys is important for the control casting defects such as porosity and dissolved hydrogen. Using in situ synchrotron X-ray radiography, we studied the dynamic behaviour of ultrasonic cavitation gas bubbles in a molten Al–10 wt% Cu alloy. The size distribution, average radius and growth rate of cavitation gas bubbles were quantified under an acoustic intensity of 800 W/cm² and a maximum acoustic pressure of 4.5 MPa (45 atm). Bubbles exhibited a log-normal size distribution with an average radius of 15.3 ± 0.5 μm. Under applied sonication conditions the growth rate of bubble radius, R(t), followed a power law with a form of R(t) = αt^β, and α = 0.0021 & β = 0.89. The observed tendencies were discussed in relation to bubble growth mechanisms of Al alloy melts.     

Lysis of Chlamydomonas reinhardtii by high-intensity focused ultrasound as a function of exposure time

Efficient lysis of microalgae for lipid extraction is an important concern when processing biofuels. Historically, ultrasound frequencies in the range of 10–40 kHz have been utilized for this task. However, greater efficiencies might be achievable if higher frequencies could be used. In our study, we evaluated the potential of using 1.1 MHz ultrasound to lyse microalgae for biofuel production while using Chlamydomonas reinhardtii as a model organism. The ultrasound was generated using a spherically focused transducer with a focal length of 6.34 cm and an active diameter of 6.36 cm driven by 20 cycle sine-wave tone bursts at a pulse repetition frequency of 2 kHz (3.6% duty cycle). The time-average acoustic power output was 26.2 W while the spatial-peak-pulse-average intensity (I_SPPA) for each tone burst was 41 kW/cm². The peak compressional and rarefactional pressures at the focus were 102 and 17 MPa, respectively. The exposure time was varied for the different cases in the experiments from 5 s to 9 min and cell lysis was assessed by quantifying the percentage of protein and chlorophyll release into the supernate as well as the lipid extractability. Free radical generation and lipid oxidation for the different ultrasound exposures were also determined. We found that there was a statistically significant increase in lipid extractability for all of the exposures compared to the control. The longer exposures also completely fragmented the cells releasing almost all of the protein and chlorophyll into the supernate. The cavitation activity did not significantly increase lipid oxidation while there was a minor trend of increased free radical production with increased ultrasound exposure.     

Ionic conductivity of polymer electrolyte membranes based on polyphosphazene with oligo(propylene oxide) side chains

A polyphosphazene [NP(NHR)₂]_n with oligo[propylene oxide] side chains − R = –[CH(CH₃)–CH₂O]_m–CH₃ (m = 6 – 10) was synthesized by living cationic polymerisation and polymer-analogue substitution of chlorine from the intermediate precursor [NPCl₂]_n using the corresponding primary amine RNH₂. The polymer had an average molecular weight of 3.3 × 10⁵ D. Polymer electrolytes with different concentrations of dissolved lithium triflate (LiCF₃SO₃) were prepared. Mechanically stable polymer electrolyte membranes were formed using UV radiation induced crosslinking of the polymer salt mixture in the presence of benzophenone as photoinitiator. The glass transition temperature of the parent polymer was found to be − 75 °C before cross linking. It increases after crosslinking and with increasing amounts of salt to a maximum of − 55 °C for 20 wt.% LiCF₃SO₃. The ionic conductivity was determined by impedance spectroscopy in the temperature range 0–80 °C. The highest conductivity was found for a salt concentration of 20 wt.% LiCF₃SO₃: 6.5 × 10^− 6 S·cm^− 1 at 20 °C and 2.8 × 10^− 4 S cm^− 1 at 80 °C. The temperature dependence of the conductivities was well described by the MIGRATION concept.     

Comparison of BOLD,diffusion-weighted fMRI and ADC-fMRI for stimulation of the primary visual system with a block paradigm

The blood oxygen level-dependent (BOLD) effect is extensively used for functional MRI (fMRI) but presents some limitations. Diffusion-weighted fMRI (DfMRI) has been proposed as a method more tightly linked to neuronal activity. This work proposes a protocol of DfMRI acquired for several b-values and diffusion directions that is compared to gradient-echo BOLD (GE-BOLD) and to repeated spin-echo BOLD (SE-BOLD, acquisitions performed with b = 0 s/mm²), which was also used to ensure the reproducibility of the response.A block stimulation paradigm of the primary visual system (V1) was performed in 12 healthy subjects with checkerboard alternations (2 Hz frequency). DfMRI was performed at 3 T with 5 b-values (b = 1500, 1000, 500, 250, 0 s/mm²) with TR/TE = 1004/93 ms, Δ/δ = 45.4 ms/30 ms, and 6 spatial directions for diffusion measures. GE-BOLD was performed with a similar block stimulation design timing. Apparent Diffusion Coefficient (ADC)-fMRI was computed with all b-values used. An identical Z-score level was used for all fMRI modalities for the comparison of volumes of activation. ADC-fMRI and SE-BOLD fMRI activation locations were compared in a voxel-based analysis to a cytoarchitectural probability map of V1.SE-BOLD activation volumes represented only 55% of the GE-BOLD activation volumes (P < 0.0001). DfMRI activation volumes averaged for all b-values acquired represented only 12% of GE-BOLD (P < 0.0001) and only 22% of SE-BOLD activation volumes (P < 0.005). Compared to SE-BOLD-fMRI, ADC-fMRI activations showed fewer pixels outside of V1 and a higher average probability of belonging to V1.DfMRI and ADC-fMRI acquisition at 3 T could be easily post-processed with common neuro-imaging software. DfMRI and ADC-fMRI activation volumes were significantly smaller than those obtained with SE-BOLD. ADC-fMRI activations were more precisely localized in V1 than those of SE-BOLD-fMRI. This validated the increased capability of ADC-fMRI compared to BOLD to enhance the precision of localizing an fMRI activation in the cyto-architectural zone V1, thereby justifying the use of ADC-fMRI for neuro-scientific studies.     

Experimental study on the influence of low-frequency and low-intensity ultrasound on the permeability of the Mycobacterium smegmatis cytoderm and potentiation with levofloxacin

Tuberculosis is an infectious disease caused by the bacterium M. tuberculosis. The aim of this study was to investigate the bactericidal effect and underlying mechanisms of low-frequency and low-intensity ultrasound combined with levofloxacin treatment against M. smegmatis (a surrogate of M. tuberculosis). As part of this study, M. smegmatis was continuously irradiated with low frequency ultrasound (42 kHz) using several different doses whereby both intensity (0.138, 0.190 and 0.329 W/cm²) and exposure time (5, 15 and 20 min) were varied. Flow cytometric analyses revealed that the permeability of M. smegmatis increased following ultrasound exposure. The survival rate, structure and morphology of bacteria in the lower-dose (I_SATA = 0.138 W/cm² for 5 min) ultrasound group displayed no significant differences upon comparison with the untreated group. However, the survival rate of bacteria was significantly reduced and the bacterial structure was damaged in the higher-dose (I_SATA = 0.329 W/cm² for 20 min) ultrasound group. Ultrasound irradiation (0.138 W/cm²) was subsequently applied to M. smegmatis in combination with levofloxacin treatment for 5 min. The results demonstrated that the bactericidal effect of ultrasonic irradiation combined with levofloxacin is higher compared to ultrasound alone or levofloxacin alone.     

Lipase catalyzed ultrasonic synthesis of poly-4-hydroxybutyrate-co-6-hydroxyhexanoate

Four different lipases were compared for ultrasound-mediated synthesis of the biodegradable copolymer poly-4-hydroxybutyrate-co-6-hydroxyhexanoate. The copolymerization was carried out in chloroform. Of the enzymes tested, Novozym 435 exhibited the highest copolymerization rate, in fact the reaction rate was observed to increase with about 26-fold from 30 to 50 °C (7.9 × 10^?3 M s^?1), sonic power intensity of 2.6 × 10³ W m^?2 and dissipated energy of 130.4 J ml^?1. Copolymerization rates with the Candida antarctica lipase A, Candida rugosa lipase, and Lecitase Ultra? were lower at 2.4 × 10^?4, 1.3 × 10^?4 and 3.5 × 10^?4 M s^?1, respectively. The catalytic efficiency depended on the enzyme. The efficiency ranged from 4.15 × 10^?3 s^?1 M^?1 for Novozym 435–1.48 × 10^?3 s^?1 M^?1 for C. rugosa lipase. Depending on the enzyme and sonication intensity, the monomer conversion ranged from 8.2% to 48.5%. The sonication power, time and temperature were found to affect the rate of copolymerization. Increasing sonication power intensity from 1.9 × 10³ to 4.5 × 10³ W m^?2 resulted in an increased in acoustic pressure (P_a) from 3.7 × 10⁸ to 5.7 × 10⁸ N m^?2 almost 2.4–3.7 times greater than the acoustic pressure (1.5 × 10⁸ N m^?2) that is required to cause cavitation in water. A corresponding acoustic particle acceleration (a) of 9.6 × 10³–1.5 × 10⁴ m s^?2 was calculated i.e. approximately 984–1500 times greater than under the action of gravity.