Thermodynamic Phase Transition Through Crystal‐to‐Crystal Process of Photochromic 1,2‐Bis(5‐phenyl‐2‐propyl‐3‐thienyl)perfluorocyclopentene

A photochromic diarylethene, 1,2‐bis(5‐phenyl‐2‐propyl‐3‐thienyl)perfluorocyclopentene ( 1a ), was found to have two polymorphic crystal forms, α‐ and β‐crystals. From X‐ray crystallographic analysis, the space groups of α‐ and β‐crystals were determined to be P2₁/c and C2/c, respectively. The difference between two crystal forms is ascribed to the orientation of two of four molecules in the unit cell. The thermodynamic phase transition from α‐ to β‐forms occurred via a crystal‐to‐crystal process, as confirmed by differential scanning calorimetry measurements, optical microscopic observations in the reflection mode and under crossed Nicols, and powder X‐ray diffraction measurements. The movement of the molecules in the crystal was evaluated by analyzing the change of face indices before and after the phase transition.     

Physicochemical characterization of α‐chitin, β‐chitin,and γ‐chitin separated from natural resources

We isolated α‐chitin, β‐chitin, and γ‐chitin from natural resources by a chemical method to investigate the crystalline structure of chitin. Its characteristics were identified with Fourier transform infrared (FTIR) and solid‐state cross‐polarization/magic‐angle‐spinning (CP–MAS) ¹³C NMR spectrophotometers. The average molecular weights of α‐chitin, β‐chitin, and γ‐chitin, calculated with the relative viscosity, were about 701, 612, and 524 kDa, respectively. In the FTIR spectra, α‐chitin, β‐chitin, and γ‐chitin showed a doublet, a singlet, and a semidoublet at the amide I band, respectively. The solid‐state CP–MAS ¹³C NMR spectra revealed that α‐chitin was sharply resolved around 73 and 75 ppm and that β‐chitin had a singlet around 74 ppm. For γ‐chitin, two signals appeared around 73 and 75 ppm. From the X‐ray diffraction results, α‐chitin was observed to have four crystalline reflections at 9.6, 19.6, 21.1, and 23.7 by the crystalline structure. Also, β‐chitin was observed to have two crystalline reflections at 9.1 and 20.3 by the crystalline structure. γ‐Chitin, having an antiparallel and parallel structure, was similar in its X‐ray diffraction patterns to α‐chitin. The exothermic peaks of α‐chitin, β‐chitin, and γ‐chitin appeared at 330, 230, and 310, respectively. The thermal decomposition activation energies of α‐chitin, β‐chitin, and γ‐chitin, calculated by thermogravimetric analysis, were 60.56, 58.16, and 59.26 kJ mol^?1, respectively. With the Arrhenius law, ln β was plotted against the reciprocal of the maximum decomposition temperature as a straight line; there was a large slope for large activation energies and a small slope for small activation energies. α‐Chitin with high activation energies was very temperature‐sensitive; β‐Chitin with low activation energies was relatively temperature‐insensitive. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3423–3432, 2004     

1H and 13C NMR and X‐ray diffraction data for a diosgenyl N,O‐protected glucopyranoside

The assignments of ¹H and ¹³C NMR chemical shifts together with x‐ray diffraction data for synthesized diosgenyl 3,4,6‐tri‐O‐acetyl‐2‐deoxy‐2‐tetrachlorophthalimido‐β‐D ‐glucopyranoside are described. The structure of this glycoside was established by using homo‐ and heteronuclear two‐dimensional NMR techniques. X‐ray diffraction data for this compound are also reported. Copyright © 2002 John Wiley & Sons, Ltd.     

Structural Studies and Anticancer Activity of a Novel Class of β‐Peptides

Functionalized oligomeric organic compounds with well‐defined β‐proline scaffold have been synthesized by a cycloadditive oligomerization approach in racemic and enantiopure forms. The structure of the novel β‐peptides was investigated by NMR spectroscopic and X‐ray methods determining the conformational shapes of the β‐proline oligomers in solution and solid states. The main structural elements subject to conformational switches are β‐peptide bonds between 5‐arylpyrrolidine‐2‐carboxylic acid units existing in Z/E configurations. The whole library of short β‐peptides and intermediate acrylamides has been tested on antiproliferative activity towards the hormone‐refractory prostate cancer cell line PC‐3 revealing several oligomeric compounds with low micromolar and submicromolar activities. Bromine‐substituted dimeric and trimeric acrylamides induced caspase‐dependent apoptosis of PC‐3 cells through cell‐cycle arrest and mitochondrial damage.     

Polymorphie von Bis(dineopentoxyphosphorothioyl)diselenid – Korrelation von Röntgenstruktur und MAS‐NMR‐Daten

Polymorphism of Bis(dineopentoxyphosphorothioyl)diselenide – Correlation of X‐Ray Structure and MAS NMR Data The crystal structures of two polymorphs of the title compound were determined by single‐crystal X‐ray methods and refined both at room temperature and 250 K. A triclinic and a monoclinic phase were discovered and studied. Both modifications are centrosymmetrical layer structures. The numerically clearly significant differences were observed in unit cell volumes as well as in alternating disproportions of distances of atoms being chemically and crystallographically equivalent as a result of discontinuously distributed conformational changes along the single bonds. Phase transitions were not observed by cooling up to 240 K. Lowering temperatures single crystals of both phases decompose because of the considerable anisotropy of intermolecular interaction. The small differences of molecular structure produce slightly splitted ³¹P CP MAS NMR signals. A comparison of the chemical shifts from ¹³C CP MAS NMR spectra and from quantum‐chemical calculations leads to the conclusion that the inner rotation around CH₂–C_q bonds is not frozen in the solid state.     

MH4P6N12 (M=Mg,Ca): New Imidonitridophosphates with an Unprecedented Layered Network Structure Type

Isotypic imidonitridophosphates MH₄P₆N₁₂ (M=Mg, Ca) have been synthesized by high‐pressure/high‐temperature reactions at 8 GPa and 1000 °C starting from stoichiometric amounts of the respective alkaline‐earth metal nitrides, P₃N₅, and amorphous HPN₂. Both compounds form colorless transparent platelet crystals. The crystal structures have been solved and refined from single‐crystal X‐ray diffraction data. Rietveld refinement confirmed the accuracy of the structure determination. In order to quantify the amounts of H atoms in the respective compounds, quantitative solid‐state ¹H NMR measurements were carried out. EDX spectroscopy confirmed the chemical compositions. FTIR spectra confirmed the presence of NH groups in both structures. The crystal structures reveal an unprecedented layered tetrahedral arrangement, built up from all‐side vertex‐sharing PN₄ tetrahedra with condensed dreier and sechser rings. The resulting layers are separated by metal atoms.     

Antiparallel Self‐Association of a γ,α‐Hybrid Peptide: More Relevance of Weak Interactions

To learn how a preorganized peptide‐based molecular template, together with diverse weak non‐covalent interactions, leads to an effective self‐association, we investigated the conformational characteristics of a simple γ,α‐hybrid model peptide, Boc‐γ‐Abz‐Gly‐OMe. The single‐crystal X‐ray diffraction analysis revealed the existence of a fully extended β‐strand‐like structure stabilized by two non‐conventional C?H???O=C intramolecular H‐bonds. The 2D ¹H NMR ROESY experiment led us to propose that the flat topology of the urethane‐γ‐Abz‐amide moiety is predominantly preserved in a non‐polar environment. The self‐association of the energetically more favorable antiparallel β‐strand‐mimic in solid‐state engenders an unusual ‘flight of stairs’ fabricated through face‐to‐face and edge‐to‐edge Ar???Ar interactions. In conjunction with FT‐IR spectroscopic analysis in chloroform, we highlight that conformationally semi‐rigid γ‐Abz foldamer in appositely designed peptides may encourage unusual β‐strand or β‐sheet‐like self‐association and supramolecular organization stabilized via weak attractive forces.     

Solid‐state drawing of β‐nucleated polypropylene: Effect of additives on drawability and mechanical properties

Isotactic polypropylene (i‐PP) can crystallize in different crystal modifications. In this article, the effect of sepiolite (one‐dimensional) and carbon black (three‐dimensional) fillers on the solid‐state drawability of i‐PP is discussed. The cross‐hatched structure of thermodynamically most stable α‐crystal phase in i‐PP does not allow for perfect chain alignment during solid‐state drawing. The β‐phase i‐PP, obtained by addition of specific nucleating agents, crystallizes in a non‐cross‐hatched spherulitic structure and allows more easy drawing. Depending on the filler type, β–α transformation takes place at different draw ratios, as was observed by in situ wide‐angle X‐ray diffraction measurements. It was observed that β‐nucleated i‐PP has a lower yield stress and can be drawn further than i‐PP crystallized in the α‐crystal phase. If added in the right amount, both carbon black and sepiolite have a reinforcing effect on PP tapes. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1071–1082     

Concomitant cocrystal and salt: no interconversion in the solid state

A cocrystal and a molecular salt of β‐alanine and dl ‐tartaric acid, C₃H₈NO₂⁺·C₄H₄O₆^?, of the same chemical composition, were studied over a wide temperature range by single‐crystal and powder X‐ray diffraction. Neither the interconversion between the two phases nor any polymorphic transitions were observed in the temperature range from 100 K to the melting points. This contrasts with the solvent‐mediated phase transition from the salt to the cocrystal in a slurry that has been documented earlier.     

Order–disorder phenomena in crystalline phases of compounds E(XMe3)4 where E = C,Si, Ge and X = Si,Sn

We discuss the dynamic solid‐state properties of crystalline phases E(XMe₃)₄ as seen by solid‐state NMR and powder X‐ray diffraction. In the first part we will qualitatively describe some of the NMR tools suitable for such investigations. In the second part we will give examples from the group of solid compounds E(XMe₃)₄ with E = C, Si, Ge and X = Si, Sn. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis and Characterization of the New Lacunar Zincophosphate [C6H10N2][ZnP2O8H2]·0.6H2O

The new zincophosphate of chemical formula [C₆H₁₀N₂][ZnP₂O₈H₂] · 0.6H₂O was hydrothermally synthesized with p‐phenylenediamine as structure‐directing agent. The title compound crystallizes in the trigonal symmetry (proposed space group P3m1), where inorganic zincophosphate chains form layers due to the half occupancy of the unique crystallographic zinc site. The layers are separated from each other by p‐phenylenediammonium dications with hydrogen bonding scheme involving the ammonium protons that reveals a pillar‐like 3D structure aspect. The compound was characterized by powder X‐ray diffraction, multinuclear solid‐state NMR, scanning electron microscopy, chemical analysis, and thermogravimetric analysis.     

Ammonolysis of 1,2‐Bis[dichloro(methyl)silyl]ethane. On the Structure of 1,3,6,8‐Tetramethyl‐2,7,11,12‐tetraaza‐1,3,6,8‐tetrasila‐tricyclo[6.2.1.13,6]‐dodecane

Ammonolysis of 1,2‐bis[dichloro(methyl)silyl]ethane afforded a crystalline tricyclic silazane along with polymeric material. The crystalline material could be isolated in pure state. It was analyzed by ¹H, ¹³C, ¹⁵N and ²⁹Si NMR spectroscopy in solution, by ¹³C, ¹⁵N and ²⁹Si MAS NMR spectroscopy in the solid state, as well as by single‐crystal and powder X‐ray diffraction. The title compound exists as a single isomer in solution, whereas in the solid state the presence of several modifications is indicated, in particular by the solid‐state MAS NMR spectra.     

Solid‐state 11B and 13C NMR,IR, and X‐ray crystallographic characterization of selected arylboronic acids and their catechol cyclic esters

Nine arylboronic acids, seven arylboronic catechol cyclic esters, and two trimeric arylboronic anhydrides (boroxines) are investigated using ¹¹B solid‐state NMR spectroscopy at three different magnetic field strengths (9.4, 11.7, and 21.1 T). Through the analysis of spectra of static and magic‐angle spinning samples, the ¹¹B electric field gradient and chemical shift tensors are determined. The effects of relaxation anisotropy and nutation field strength on the ¹¹B NMR line shapes are investigated. Infrared spectroscopy was also used to help identify peaks in the NMR spectra as being due to the anhydride form in some of the arylboronic acid samples. Seven new X‐ray crystallographic structures are reported. Calculations of the ¹¹B NMR parameters are performed using cluster model and periodic gauge‐including projector‐augmented wave (GIPAW) density functional theory (DFT) approaches, and the results are compared with the experimental values. Carbon‐13 solid‐state NMR experiments and spectral simulations are applied to determine the chemical shifts of the ipso carbons of the samples. One bond indirect ¹³C‐¹¹B spin‐spin (J) coupling constants are also measured experimentally and compared with calculated values. The ¹¹B/¹⁰B isotope effect on the ¹³C chemical shift of the ipso carbons of arylboronic acids and their catechol esters, as well as residual dipolar coupling, is discussed. Overall, this combined X‐ray, NMR, IR, and computational study provides valuable new insights into the relationship between NMR parameters and the structure of boronic acids and esters. Copyright © 2012 John Wiley & Sons, Ltd.     

3-烷基/对烷氧基苯基-3-羟基-联茚满烯二酮衍生物的合成，晶体结构与固态光致变色及光致自由基性质研究

本文合成了一系列3-烷基/对烷氧基苯基-3-羟基-联茚满烯二酮新化合物,并通过¹H NMR, IR, MS 和元素分析数据进行了结构表征,其中化合物1,5,6的结构通过单晶X-Ray衍射进行了确证。分别用固体紫外光谱和电子自旋共振光谱研究了化合物的光致变色性能和光致自由基性质,结果表明：该类化合物在200W高压水银灯光源照射下产生光致变色现象,同时具有光致自由基性质。本文还根据分子结构和及分子内的作用力讨论了性质与结构之间的关系。     

A High‐Pressure Polymorph of Phosphorus Nitride Imide

Phosphorus nitride imide, PN(NH), is of great scientific importance because it is isosteric with silica (SiO₂). Accordingly, a varied structural diversity could be expected. However, only one polymorph of PN(NH) has been reported thus far. Herein, we report on the synthesis and structural investigation of the first high‐pressure polymorph of phosphorus nitride imide, β‐PN(NH); the compound has been synthesized using the multianvil technique. By adding catalytic amounts of NH₄Cl as a mineralizer, it became possible to grow single crystals of β‐PN(NH), which allowed the first complete structural elucidation of a highly condensed phosphorus nitride from single‐crystal X‐ray diffraction data. The structure was confirmed by FTIR and ³¹P and ¹H solid‐state NMR spectroscopy. We are confident that high‐pressure/high‐temperature reactions could lead to new polymorphs of PN(NH) containing five‐fold‐ or even six‐fold‐coordinated phosphorus atoms and thus rivalling or even surpassing the structural variety of SiO₂.     

Crystalline β‐structure of PHBV grown epitaxially on silicate layers of MMT

The poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV)/montmorillonite(MMT) nanocomposites were investigated by wide‐angle X‐ray scattering (WAXS). The aim of the investigation was solution intercalation of MMT with PHBV. Beside the usual orthorhombic unit cell, a stable pseudohexagonal β‐structure of PHBV was obtained. Well known β‐structure has one common WAXS reflection (d = 0.480 nm), which corresponds to the mean distance of PHBV chains in the pseudohexagonal structure. The new β‐structure has two diffraction peaks in the WAXS pattern. It is a three‐dimensionally ordered crystalline structure oriented in parallel with the silica layers of MMT. The new polymorphic form is supposed to be growing on the layers of MMT. Its layers serve as primary nucleation centers for epitaxial growth of the β‐structure. After annealing, this polymorphic form of PHBV disappears and it is transformed into the more stable α‐form leading to an enhanced total crystallinity of the polymer comprised in the nanocomposite. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 751–755, 2009     

两个新颖的联环十二烷衍生物的合成及结构表征

2-（2＇-Oxo-3＇-oximidocyclododecyl） cyclododecanone （1） and 2-（1＇-hydroxylcyclododecyl） cyclododecanone （2） were synthesized and characterized. The conformation analysis was carried out based on the NMR, molecular mechanics calculation and X-ray diffraction. The conformation of two cyclododecyl moieties of both 1 and 2 was found to be the [3333]-2-one or [3333] square conformation both in the crystal state and the solution. The dihedral angle between carbonyl and the oxime double bond of the ring B is 180°in the crystal of 1. The protons or hydroxyl group of carbon atoms to link the two cyclododecyl moieties of 1 and 2 constitute dihedral angles of 174°in the crystal, and 175°in the solution, and the C-C 6 bond between two cyclododecyl moieties can not freely rotate in the solid state and the solution. In addition, compound 2 was the first example of a-comer-anti-monosubstituted cyclododecanone. synthesis     

Synthesis,conformation transition,liquid crystal phase,and self‐assembled morphology of thermosensitive homopolypeptide

Thermosensitive diethylene glycol‐derived poly(L ‐glutamate) homopolypeptides (i.e., poly‐L ‐EG₂‐Glu) with different molecular weights (MW) (M_n,GPC = 5380–32520) were synthesized via the ring‐opening polymerization (ROP) of EG₂‐L ‐glutamate N‐carboxyanhydride (EG₂‐Glu‐NCA) in N,N‐dimethylformamide solution at 50 °C. Their molecular structure, conformation transition, liquid crystal (LC) phase behavior, lower critical solution temperature (LCST) transition, and morphology evolution were thoroughly characterized by means of FTIR, ¹H NMR, gel permeation chromatography, differential scanning calorimetry, wide angle X‐ray diffraction, polarized optical microscope, transmission electron microscope, and dynamic light scattering. In solid state, the homopolypeptide poly‐L ‐EG₂‐Glu presented a conformation transition from α‐helix to β‐sheet with increasing their MW at room temperature, while it mainly assumed an α‐helix of 80–86% in aqueous solution. Poly‐L ‐EG₂‐Glu showed a thermotropic LC phase with a transition temperature of about 100 °C in solid state, while it gave a reversible LCST transition of 34–36 °C in aqueous solution. The amphiphilic homopolypeptide poly‐L ‐EG₂‐Glu self‐assembled into nanostructures in aqueous solution, and their critical aggregation concentrations decreased with increasing MW. Interestingly, their morphology changed from spherical micelles to worm‐like micelles, then to fiber micelles with increasing MW. This work provides a simple method for the generation of different nanostructures from a thermosensitive biodegradable homopolypeptide. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Development of oriented structure and properties on drawing of poly(vinylidene fluoride) by solid‐state coextrusion

Gel films of poly(vinylidene fluoride) (PVDF) consisting of α‐form crystals were drawn uniaxially by solid‐state coextrusion to extrusion draw ratios (EDR) up to 9 at an optimum extrusion temperature of 160 °C, about 10°C below the melting temperature (T_m). The development of an oriented structure and mechanical and electrical properties on coextrusion drawing were studied as a function of EDR. Wide‐angle X‐ray diffraction patterns showed that the α crystals in the original gel films were progressively transformed into oriented β‐form crystals with increasing EDR. At the highest EDR of 9 achieved, the drawn product consisted of a highly oriented fibrous morphology with only β crystals even for the draw near the T_m. The dynamic Young's modulus along the draw direction also increased with EDR up to 10.5 GPa at the maximum EDR of 9. The electrical properties of ferroelectricity and piezoelectricity were also markedly enhanced on solid‐state coextrusion. The D–E square hysteresis loop became significantly sharper with EDR, and a remanent polarization P_r of 100 mC/m² and electromechanical coupling factor along the thickness direction k_t of 0.27 were achieved at the maximum EDR of 9. The crystallinity value of 73–80% for the EDR 9 film, estimated from these electrical properties, compares well with that calculated by the ratio of the crystallite size along the chain axis to the meridional small‐angle X‐ray scattering (SAXS) long period, showing the average thickness of the lamellae within the drawn β film. These results, as well as the appearance of a strong SAXS maximum, suggest that the oriented structure and properties of the β‐PVDF are better explained in terms of a crystal/amorphous series arrangement along the draw axis. Further, the mechanical and electrical properties obtained in this work are the highest among those ever reported for a β‐PVDF, and the latter approaches those observed for the vinylidene fluoride and trifluoroethylene copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1371–1380, 2001     

A Combined Solid‐State NMR and X‐ray Crystallography Study of the Bromide Ion Environments in Triphenylphosphonium Bromides

Multinuclear (³¹P and ^79/81Br), multifield (9.4, 11.75, and 21.1 T) solid‐state nuclear magnetic resonance experiments are performed for seven phosphonium bromides bearing the triphenylphosphonium cation, a molecular scaffold found in many applications in chemistry. This is undertaken to fully characterise their bromine electric field gradient (EFG) tensors, as well as the chemical shift (CS) tensors of both the halogen and the phosphorus nuclei, providing a rare and novel insight into the local electronic environments surrounding them. New crystal structures, obtained from single‐crystal X‐ray diffraction, are reported for six compounds to aid in the interpretation of the NMR data. Among them is a new structure of BrPPh₄, because the previously reported one was inconsistent with our magnetic resonance data, thereby demonstrating how NMR data of non‐standard nuclei can correct or improve X‐ray diffraction data. Our results indicate that, despite sizable quadrupolar interactions, ^79/81Br magnetic resonance spectroscopy is a powerful characterisation tool that allows for the differentiation between chemically similar bromine sites, as shown through the range in the characteristic NMR parameters. ^35/37Cl solid‐state NMR data, obtained for an analogous phosphonium chloride sample, provide insight into the relationship between unit cell volume, nuclear quadrupolar coupling constants, and Sternheimer antishielding factors. The experimental findings are complemented by gauge‐including projector‐augmented wave (GIPAW) DFT calculations, which substantiate our experimentally determined strong dependence of the largest component of the bromine CS tensor, δ₁₁, on the shortest Br? P distance in the crystal structure, a finding that has possible application in the field of NMR crystallography. This trend is explained in terms of Ramsey’s theory on paramagnetic shielding. Overall, this work demonstrates how careful NMR studies of underexploited exotic nuclides, such as ^79/81Br, can afford insights into structure and bonding environments in the solid state.