功能梯度变曲率曲梁的几何非线性模型及其数值解

基于弹性曲梁平面问题的精确几何非线性理论,建立了功能梯度变曲率曲梁在机械和热载荷共同作用下的无量纲控制方程和边界条件,其中基本未知量均被表示为变形前的轴线坐标的函数.以椭圆弧曲梁为例,采用打靶法求解非线性常微分方程的两点边值问题,获得了两端固定功能梯度椭圆弧曲梁在横向非均匀升温下的热弯曲变形数值解,分析了材料梯度指数、温度参数、结构几何参数等对曲梁受力及变形的影响.     

弹性曲梁在机械和热载荷共同作用下的几何非线性模型及其数值解

基于Euler-Bernoulli梁的几何非线性理论,建立了弹性曲梁在任意分布机械载荷和热载荷共同作用下的几何非线性静平衡控制方程。该模型不仅计及了轴线伸长,同时也精确地考虑了梁的初始曲率对变形的影响以及轴向变形与弯曲变形之间的相互耦合效应。应用打靶法数值求解了半圆形曲梁在横向均匀升温作用下的非线性弯曲问题,数值比较了轴向伸长对曲梁变形的影响。     

一维准晶功能梯度层合圆柱壳热电弹性精确解

两种或多种不同性质材料组成的层状结构可以满足工业发展的需求.然而,材料属性在接触面的突变问题,容易导致层间界面处产生应力集中、裂纹以及分层等问题.功能梯度材料利用连续变化的组分梯度来代替突变界面,可以消除界面处的物理性能突变,提高结构的粘结强度.本文以一维准晶功能梯度层合圆柱壳为研究对象,利用类Stroh公式和传递矩阵方法,建立了材料参数沿径向呈现幂函数变化的层合圆柱壳模型,获得了简支边界条件对应的一维准晶功能梯度层合圆柱壳的热电弹性精确解.数值算例中讨论了层合圆柱壳内外表面承受温度载荷时,功能梯度指数因子对温度场、电场、声子场和相位子场的影响,尤其是对层合圆柱壳内外表面的影响.结果表明,指数因子改变了材料参数的空间分布情况,进而对温度场、电场、声子场和相位子场都有影响;增加功能梯度指数因子,可减小温度载荷引起的内表面变形,进而提升结构强度.本文得到的结果可以为功能梯度准晶层合圆柱壳的设计和制造提供可靠的理论依据.     

功能梯度材料扁锥壳的热弹性大变形分析

研究了功能梯度材料扁薄锥壳在横向非均匀升温场中的几何非线性大变形问题.基于von Kármán几何非线性理论推导出了以中面位移为基本未知量的功能梯度扁薄锥壳在横向非均匀热载荷作用下的轴对称大挠度控制方程.采用打靶法数值求解所得非线性常微分方程边值问题,得到了锥壳的大挠度弯曲变形数值解.给出了锥壳的变形与其形状参数、载荷和材料参数等变化的特征关系曲线,分析和讨论了温度参数和材料梯度变化参数对变形的影响.     

功能梯度截顶圆锥壳的热弹性弯曲精确解

研究了功能梯度材料截顶圆锥壳在横向机械载荷与非均匀热载荷同时作用下的变形问题. 基于经典线性壳体理论推导出了以横向剪力和中面转角为基本未知量的功能梯度薄圆锥壳轴对称变形的混合型控制方程. 假设功能梯度圆锥壳的材料性质为沿厚度方向按照幂函数连续变化的形式. 然后采用解析方法求解,得到了问题的精确解. 分别就两端简支和两端固支边界条件,给出了圆锥壳的变形随其载荷、材料参数等变化的特征关系曲线,重点分析和讨论了载荷参数与材料梯度变化参数对变形的影响.      

功能梯度矩形厚板的三维热弹性分析

直接从三维热弹性力学基本方程出发，通过引入两个位移函数和两个应力函数，导出了一个二阶的齐次状态方程和一个四阶的非齐次状态方程。分析中采用了层合近似模型，即将板划分成厚度足够小的若干薄层，从面可将每一层内的材料常数近似为常数。给出了任意厚度的四边简支横观各向同性功能梯度矩形板的热弹性分析，特别当板较薄时，与薄板理论进行了数值对比，发现两者结果吻合很好。最后研究了材料梯度指标对热弹性场的影响，结果显示梯度指标对热应力和位移都有着显著的作用：在不同的区间，梯度指标对它们有不同的影响；并且在同一区间，梯度指标对两者的影响程度也有所不同。     

功能梯度压电材料圆环位移和电势边值问题的精确解

圆环形的压电材料器件在智能结构中得到了广泛的应用。本文推导了横观各向同性功能梯度压电材料圆环在内、外边界上给定位移和电势情况下的一般解。极化方向在圆环的半径方向,材料常数的梯度方向也设定在半径方向,并可表示为半径r的幂,本构关系为线性。然后推导了压电圆环外壁固定、接地,内壁沿垂向有一微小位移、电势分别为余弦分布和均匀分布的问题的精确解,并计算了该问题在这两种电势情况下产生的无量纲形式的径向和环向位移、电势、应力及电位移沿径向分布的数值结果。计算中考虑了不同的材料梯度,以及内壁的位移与电势的不同比例。     

功能梯度热释电材料平板柱形弯曲问题的精确解

采用状态空间法，假定材料常数沿厚度方向均按同一指数函数规律变化，获得了功能梯度热释电材料平板柱形弯曲问题的精确解。通过算例，分析了在机械荷载、电荷载和热荷载分别作用下，材料性质的不同梯度变化对平板结构响应的影响。     

功能梯度板条的热弹性力学解

本文利用推广后的Mian 和Spencer 功能梯度板理论,研究了功能梯度板条在非均布温度场作用下的热弹性问题．采用该理论中的位移展开公式,在板厚度方向上考虑热传导引起的稳态温度场,材料常数沿板厚方向可以任意连续变化,从而得到了基于弹性理论的功能梯度板条在温度场作用下的解析解．通过数值算例分析,验证了本文理论的正确性并讨论了边界条件和梯度变化程度对功能梯度板条热弹性响应的影响．     

热荷载作用下Timoshenko功能梯度夹层梁的静态响应

在精确考虑轴线伸长和一阶横向剪切变形的基础上建立了Timoshenko功能梯度夹层梁在热载荷作用下的几何非线性控制方程.采用打靶法数值求解所得强非线性边值问题,获得了两端固支功能梯度夹层梁在横向非均匀升温作用下的静态热过屈曲和热弯曲变形数值解.分析了功能梯度材料参数变化、不同表层厚度和升温参数对夹层梁弯曲变形、拉-弯耦合变形的影响,并给出温度函数在夹层梁厚度方向的具体分布形式.     

Thermal post-bunkling analyses of functionally graded material rod

The non-linear governing differential equations of immovably simply supported functionally graded material (FGM) rod subjected to thermal loads were derived. The thermal post-buckling behaviors of FGM rod made of ZrO2 and Ti-6Al-4Vwere analyzed by shooting method. Firstly, the thermal post-buckling equilibrium paths of the FGM rod with different gradient index in the uniform temperature field were plotted, and compared with the behaviors of the homogeneous rods made of ZrO2 and Ti-6A1-4V materials, respectively. For given value of end rotation angles, the influence of gradient index on the thermal post-buckling behaviors of FGM rod was discussed. Secondly, the thermal post-buckling characteristics of the FGM rod were analyzed when the temperature difference parameter is changed while the bottom temperature parameter remains constant, and when the bottom temperature parameter is changed while the temperature difference parameter remains constant, and compared with the characteristics of the two homogeneous material rods.     

Free vibration of functionally graded beams based on both classical and first-order shear deformation beam theories

The free vibration of functionally graded material （FGM） beams is studied based on both the classical and the first-order shear deformation beam theories. The equations of motion for the FGM beams are derived by considering the shear deforma- tion and the axial, transversal, rotational, and axial-rotational coupling inertia forces on the assumption that the material properties vary arbitrarily in the thickness direction. By using the numerical shooting method to solve the eigenvalue problem of the coupled ordinary differential equations with different boundary conditions, the natural frequen- cies of the FGM Timoshenko beams are obtained numerically. In a special case of the classical beam theory, a proportional transformation between the natural frequencies of the FGM and the reference homogenous beams is obtained by using the mathematical similarity between the mathematical formulations. This formula provides a simple and useful approach to evaluate the natural frequencies of the FGM beams without dealing with the tension-bending coupling problem. Approximately, this analogous transition can also be extended to predict the frequencies of the FGM Timoshenko beams. The numerical results obtained by the shooting method and those obtained by the analogous transformation are presented to show the effects of the material gradient, the slenderness ratio, and the boundary conditions on the natural frequencies in detail.     

Free vibration analysis of functionally graded material beams based on Levinson beam theory

Free vibration response of functionally graded material (FGM) beams is studied based on the Levinson beam theory (LBT). Equations of motion of an FGM beam are derived by directly integrating the stress-form equations of elasticity along the beam depth with the inertial resultant forces related to the included coupling and higherorder shear strain. Assuming harmonic response, governing equations of the free vibration of the FGM beam are reduced to a standard system of second-order ordinary differential equations associated with boundary conditions in terms of shape functions related to axial and transverse displacements and the rotational angle. By a shooting method to solve the two-point boundary value problem of the three coupled ordinary differential equations, free vibration response of thick FGM beams is obtained numerically. Particularly, for a beam with simply supported edges, the natural frequency of an FGM Levinson beam is analytically derived in terms of the natural frequency of a corresponding homogenous Euler-Bernoulli beam. As the material properties are assumed to vary through the depth according to the power-law functions, the numerical results of frequencies are presented to examine the effects of the material gradient parameter, the length-to-depth ratio, and the boundary conditions on the vibration response.     

Effects of thermo-magneto-electro nonlinearity characteristics on the stability of functionally graded piezoelectric beam

Due to the increasing interests in using functionally graded piezoelectric materials(FGPMs) in the design of advanced micro-electro-mechanical systems, it is important to understand the stability behaviors of the FGPM beams. In this study, considering the effects of geometrical nonlinearity, temperature, and electricity in the constitutive relations and the effect of the magnetic field on the FGPM beam, the Euler-Bernoulli beam model is adopted, and the nonlinear governing equation of motion is ...     

粘贴压电层功能梯度材料Timoshenko梁的热过屈曲分析

研究了上下表面粘贴压电层的功能梯度材料Timoshenko梁在升温及电场作用下的过屈曲行为。在精确考虑轴线伸长和一阶横向剪切变形的基础上,建立了压电功能梯度Timoshenko层合梁在热-电-机械载荷作用下的几何非线性控制方程。其中,假设功能梯度的材料性质沿厚度方向按照幂函数连续变化,压电层为各向同性均匀材料。采用打靶法数值求解所得强非线性边值问题,获得了在均匀电场和横向非均匀升温场内两端固定Timoshenko梁的静态非线性屈曲和过屈曲数值解。并给出了梁的变形随热、电载荷及材料梯度参数变化的特性曲线。结果表明,通过施加电压在压电层产生拉应力可以有效地提高梁的热屈曲临界载荷,延缓热过屈曲发生。由于材料在横向的非均匀性,即使在均匀升温和均匀电场作用下,也会产生拉-弯耦合效应。但是对于两端固定的压电-功能梯度材料梁,在横向非均匀升温下过屈曲变形仍然是分叉形的。     

Non-uniform rational B-spline based free vibration analysis of axially functionally graded tapered Timoshenko curved beams

The free vibration of axially functionally graded (FG) tapered Timoshenko curved beams is studied with the numerical approach. By using the non-uniform rational B-spline (NURBS) basis functions, the exact geometry and the generalized displacement field are formulated. Variable geometric parameters and material properties, including the curvature, cross-sectional area, area moment of inertia, mass density, and Young’s modulus, are expanded as functions of the coordinate in a parametric domain. Based on Hamilton’s principle, the weak formulation is derived by applying a refined constitutive relation which considers the thickness effect. Natural frequencies and mode shapes are obtained from the eigenvalue equation. Circular, elliptic, and parabolic curved beams are considered in numerical examples. The obtained results are in good agreement with those in the existing studies and those calculated by the finite element software ANSYS. Moreover, the effects of the material gradient, taper ratio, slenderness ratio, and heightspan ratio on vibration behaviors are discussed.     

Higher-order crack tip fields for functionally graded material plate with transverse shear deformation

The crack tip fields are investigated for a cracked functionally graded material (FGM) plate by Reissner’s linear plate theory with the consideration of the transverse shear deformation generated by bending. The elastic modulus and Poisson’s ratio of the functionally graded plates are assumed to vary continuously through the coordinate y, according to a linear law and a constant, respectively. The governing equations, i.e., the 6th-order partial differential equations with variable coefficients, are derived in the polar coordinate system based on Reissner’s plate theory. Furthermore, the generalized displacements are treated in a separation-of-variable form, and the higher-order crack tip fields of the cracked FGM plate are obtained by the eigen-expansion method. It is found that the analytic solutions degenerate to the corresponding fields of the isotropic homogeneous plate with Reissner’s effect when the in-homogeneity parameter approaches zero.     

Bending analysis of functionally graded CNT reinforced doubly curved singly ruled truncated rhombic cone

The bending analysis of functionally graded carbon nanotube (CNT) reinforced doubly curved singly ruled truncated rhombic cone is investigated. In this study, a simple C⁰ isoparametric finite element formulation based on third order shear deformation theory is presented. To characterize the membrane-flexure behavior observed in a CNT reinforced truncated rhombic cone, a displacement field involving higher-order terms in in-plane fields is considered. The proposed kinematics field incorporates for transverse shear deformation and nonlinear variation of the in-plane displacement field through the thickness to predict the overall response of the CNT reinforced truncated rhombic cone in an accurate sense. The material properties of the CNT reinforced truncated rhombic cone are estimated according to the rule of mixture. The present model eliminates the need of shear correction factor and imposed zero-transverse shear strain at upper and lower surface of the truncated rhombic cone. The new feature in present model is simultaneous inclusion of twist curvature in strain field as well as curvature in displacement field that makes it suitable for moderately thick and deep truncated rhombic cone. The proposed new mathematical model is implemented in finite element code written in FORTRAN. The proposed model has been validated with analytical, experimental, and finite element results from the literature. This is first attempt to study bending response of CNT reinforced doubly curved singly ruled truncated rhombic cone. The effect of CNT distribution, boundary condition, loading pattern, and other geometric parameters are also examined.