An elaborative unit cost structure-based fuzzy economic production quantity model

The purpose of this paper is to investigate and propose a fuzzy extended economic production quantity model based on an elaboratively modeled unit cost structure. This unit cost structure consists of the various lot-size correlative components such as on-line setups, off-line setups, initial production defectives, direct material, labor, and depreciation in addition to lot-size non-correlative items. Thus, the unit cost is correlatively modeled to the production quantity. Therefore, the modeling or the annual total cost function developed consists of not only annual inventory and setup costs but also production cost. Moreover, via the concept of fuzzy blurred optimal argument and the vertex method of the α-cut fuzzy arithmetic (or fuzzy interval analysis), two solution approaches are proposed: (1) a fuzzy EPQ and (2) a compromised crisp EPQ in the fuzzy sense. An optimization procedure, which can simultaneously determine the α-cut-vertex combination of fuzzy parameters and the optimizing decision variable value, is also proposed. The sensitivity model for the fuzzy total cost and thus EPQ to the various cost factors is provided. Finally, a numerical example with the original data collected from a firm demonstrates the usefulness of the new model.     

An interval programming approach for developing economic order quantity model with imprecise exponents and coefficients

This paper develops an economic order quantity (EOQ) model with uncertain data. For modelling the uncertainty in real-world data, the exponents and coefficients in demand and cost functions are considered as interval data and then, the related model is designed. The proposed model maximises the profit and determines the price, marketing cost and lot sizing with the interval data. Since the model parameters are imprecise, the objective value is imprecise, too. So, the upper and lower bounds are specially formulated for the problem and then, the model is transferred to a geometric program. The resulted geometric program is solved by using the duality approach and the lower and upper bounds are found out for the objective function and variables. Two numerical examples and sensitivity analysis are further used to illustrate the performance of the proposed model.     

Interactive fuzzy decision making method for solving bilevel programming problem

In this paper, an interactive fuzzy decision making method is proposed for solving bilevel programming problem. Introducing a new balance function, we consider the overall satisfactory balance between the leader and the follower. Then, a satisfactory solution can be obtained by the proposed method. Finally, numerical examples are reported to illustrate the feasibility of the proposed method.     

An economic order quantity model for deteriorating items with partially permissible delay in payments linked to order quantity

To attract more sales suppliers frequently offer a permissible delay in payments if the retailer orders more than or equal to a predetermined quantity W. In this paper, we generalize [Goyal, S.K., 1985. EOQ under conditions of permissible delay in payments. Journal of the Operational Research Society 36, 335–338] economic order quantity (EOQ) model with permissible delay in payment to reflect the following real-world situations: (1) the retailer’s selling price per unit is significantly higher than unit purchase price, (2) the interest rate charged by a bank is not necessarily higher than the retailer’s investment return rate, (3) many items such as fruits and vegetables deteriorate continuously, and (4) the supplier may offer a partial permissible delay in payments even if the order quantity is less than W. We then establish the proper mathematical model, and derive several theoretical results to determine the optimal solution under various situations and use two approaches to solve this complex inventory problem. Finally, a numerical example is given to illustrate the theoretical results.     

An economic order quantity model with partial backordering and a special sale price

A constant unit purchase cost is one of the main assumptions in the classic economic order quantity model. In practice, suppliers sometimes offer special sale prices to stimulate sales or decrease inventories of certain items. In this paper we develop an EOQ model with a special sale price and partial backordering. We prove the convexity of the cost-reduction function if a special order is placed at the special sale price. A solution method is proposed and numerical examples are presented.     

A displayed inventory model with L–R fuzzy number

In this study, we formulate a multi-item displayed inventory model under shelf-space constraint in fuzzy environment. Here demand rate of an item is considered as a function of the displayed inventory level. The problem is formulated to maximize average profit. In real life situation, the goals and inventory parameters are may not precise. Such type of uncertainty may be characterized by fuzzy numbers. Here, the constraint goal and the inventory cost parameters are assumed to be triangular shaped fuzzy numbers with different types of left and right membership functions. The fuzzy numbers are then approximated to a nearest interval number. Using arithmetic of interval numbers, the problem is described as a multi-objective inventory problem. The problem is then solved by fuzzy geometric programming approach. Finally a numerical example is given to illustrate the problem.     

Linear programming with fuzzy parameters: An interactive method resolution

This paper proposes a method for solving linear programming problems where all the coefficients are, in general, fuzzy numbers. We use a fuzzy ranking method to rank the fuzzy objective values and to deal with the inequality relation on constraints. It allows us to work with the concept of feasibility degree. The bigger the feasibility degree is, the worst the objective value will be. We offer the decision-maker (DM) the optimal solution for several different degrees of feasibility. With this information the DM is able to establish a fuzzy goal. We build a fuzzy subset in the decision space whose membership function represents the balance between feasibility degree of constraints and satisfaction degree of the goal. A reasonable solution is the one that has the biggest membership degree to this fuzzy subset. Finally, to illustrate our method, we solve a numerical example.     

Fuzzy measures for profit maximization with fuzzy parameters

Profit maximization is an important issue to the firms that pursue the largest economic profit possible. This paper extends the situation from the deterministic to uncertain, where the coefficients are represented by fuzzy numbers. Intuitively, when the problem has fuzzy parameters, the derived profit value should be a fuzzy number as well. The extension principle is utilized to develop a pair of two-level mathematical programs to calculate the upper and lower bounds of the profit value at α-cuts. Following the duality theorem and a variable separation technique, the two-level mathematical programs are transformed into a class of one-level signomial geometric programs to solve. An example is given to illustrate the idea proposed in this paper.     

An economic order quantity model for deteriorating item in a purchasing system with multiple prepayments

In the classic economic order quantity model the purchasing cost of an order should be paid at the time of its receipt. Sometimes, retailers ask purchasers to pay all or a fraction of the purchasing cost in advance and sometimes allow them to divide the prepayment into several equal-sized parts. In this paper, economic order quantity model for a deteriorating product with and without shortage under consecutive prepayments are developed. Numerical examples illustrate the proposed models and solution method and sensitivity analysis provides some managerial insights for managers.     

Symmetric AC fuzzy power flow model

Power flow calculations are one of the most important computational tools for planning and operating electric power systems. After the stabilization of the deterministic power flow calculation methods, the need to capture uncertainty in load definition lead first to the development of probabilistic models, and later to fuzzy approaches able to deal with qualitative declarations and other non-probabilistic information about the value of the loads. Present fuzzy power flow (FPF) calculations use typically incremental techniques, in order to obtain a good approximation of the fuzzy state variables. However, these models and procedures are not entirely satisfactory for the evaluation of the adequacy of the electric transmission system, since they are not completely symmetric. In this paper, we show how to perform the detailed calculation of the state variables of the FPF problem in an exact and symmetrical way, by means of solving multiple optimization problems. The procedure is illustrated using the IEEE 118 test system.     

An economic order quantity with imperfect quality and quantity discounts

Previous studies in the issue of inventory models with imperfect quality assumed the defectives could be sold in a batch by the end of the inspection process and the manufacturing systems were push systems. However, the above assumptions may not be true in the pull system in which buyer is powerful. Therefore, in this paper, we develop a new inventory model for items with imperfect quality and quantity discounts where buyer has exerted power over its supplier. Based on the concept of powerful buyer, there are three considerations included in this new model: (1) the order quantity is manufactured at one setup and is shipped over multiple deliveries, (2) the defectives are screened out by a 100% inspection for each shipment but sold in a batch by the end of inspection at the last shipment of each cycle, and (3) the supplier offers quantity discounts to response the request of the powerful buyer. Further, an algorithm is developed to help the powerful buyer to determine the optimal order policy accurately and quickly. Two numerical examples are available in this paper to illustrate the proposed model and algorithm. Besides, based on the numerical examples, a sensitivity analysis is made to investigate the effects of four important parameters (the inspection rate, the defective rate, the receiving cost, and the ordering cost) on the optimal solution.     

A simple method to compute economic order quantities

In this note, a simple method by using the arithmetic–geometric-mean-inequality theorem is proposed to computer the global minimum economic order quantities without taking complex differential calculus or using tedious algebraic manipulations. In contrast to (Minner, S., 2007. A note on how to compute economic order quantity without derivatives by cost comparisons. International Journal of Production Economics 105, 293–296; Wee, H.M., Wang, W.T., Chung, C.J., 2009. A modified method to computer economic order quantities without derivatives by cost-difference comparisons. European Journal of Operational Research) based on a local cost minimum initially to derive the solution and then proven it’s the global minimum, the proposed method yields the global minimum cost immediately and explicitly without using the cost comparisons and letting the time horizon to infinity.     

Analytical models for supplier selection and order quantity allocation

In the literature, decision models and techniques for supplier selection do not often consider inventory management of the items being purchased as part of the analysis. In this article, two mixed integer nonlinear programming models are proposed to select the best set of suppliers and determine the proper allocation of order quantities while minimizing the annual ordering, inventory holding, and purchasing costs under suppliers’ capacity and quality constraints. The first model allows independent order quantities for each supplier while the second model restricts all order quantities to be of equal size, as it would be required in a multi-stage (supply chain) inventory model. Illustrative examples are used to highlight the advantages of the proposed models over a previous model introduced in the literature.     

On the fuzzy team decision in a changing environment

This paper formulates a fuzzy team decision problem in a changing environment. The concept of a fuzzy set is introduced to formulate the team decision processes in a dynamic environment which contains fuzzy states, fuzzy information functions, fuzzy information signals, fuzzy decision functions and fuzzy actions.     

Mean-semivariance models for fuzzy portfolio selection

This paper discusses portfolio selection problem in fuzzy environment. In the paper, semivariance is originally presented for fuzzy variable, and three properties of the semivariance are proven. Based on the concept of semivariance of fuzzy variable, two fuzzy mean-semivariance models are proposed. To solve the new models in general cases, a fuzzy simulation based genetic algorithm is presented in the paper. In addition, two numerical examples are also presented to illustrate the modelling idea and the effectiveness of the designed algorithm.     

A fuzzy stochastic model for telecommunications bandwidth brokers under probabilistic QoS measures

In this paper, we model and solve profit maximization problem of a telecommunications Bandwidth Broker (BB) under uncertain market and network infrastructure conditions. The BB may lease network capacity from a set of Backbone Providers (BPs) or from other BBs in order to gain profit by leasing already purchased capacity to end-users. BB’s problem becomes harder to deal with when bandwidth requests of end-users, profit and cost margins are not known in advance. The novelty of the proposed work is the development of a mechanism via combining fuzzy and stochastic programming methodologies for solving complex BP selection and bandwidth demand allocation problem in communication networks, based on the fact that information needed for making these decisions is not available prior to leasing capacity. In addition, suggested model aims to maximize BB’s decision maker’s satisfaction ratio rather than just profit. As a solution strategy, the resulting fuzzy stochastic programming model is transformed into deterministic crisp equivalent form and then solved to optimality. Finally, the numerical experiments show that on the average, proposed approach provides 14.30% more profit and 69.50% more satisfaction ratio compared to deterministic approaches in which randomness and vagueness in the market and infrastructure are ignored.     

The aggregation operations for decision making in probabilistic fuzzy environment

This paper deals with some important classes of aggregation operations on various kinds of sets applied to decision making problems.These operations are mainly based on general concepts such as triangular norms (t- and s-norms). In this paper we focus particularly on operations on probabilistic sets and their distribution function representation. The considerations are illustrated by means of numerical examples.