Determination of hydrogen peroxide by utilizing a cobalt(II)hexacyanoferrate-modified glassy carbon electrode as a chemical sensor

A mixed-valence cluster of cobalt(II)hexacyanoferrate possesses an electron transfer property and is suitable for the development of an effective hydrogen peroxide detection scheme. The characteristics of cobalt(II)hexacyanoferrate have been studied using both elemental analysis and infrared spectra, confirming the structure is Co[Fe^II(CN)₆]. The cobalt(II)hexacyanoferrate-modified electrode exhibits a rapid response (t_95% - 6.5 s) to the injection of 5.0 × 10⁻⁵ M hydrogen peroxide. The linearity of the response is up to 1.1 × 10⁻³ M (correlation coefficients is 0.999). The sensitivity of this modified electrode is 11.8 μA/mM-mm². The detection limit of cobalt(II)hexacyanoferrate-modified electrode to hydrogen peroxide is 6.25 × 10⁻⁸ M. The current chemical sensor modified with Co[Fe^II(CN)₆] has better sensitivity than previous ones. The modified glassy carbon electrode shows no interference from ascorbic acid, uric acid, acetaminophen, 1,4-dihydroxyquinone, dopamine at the 2.0 × 10⁻⁴ M level and polyamines at 5.0 × 10⁻⁵ M level.     

Potentiometric determination of potassium cations using a nickel(II) hexacyanoferrate-modified electrode

Electroactive nickel(II) hexacyanoferrate (NiHCF) thin film modified electrodes are effective potentiometric sensors for the determination of potassium ions. The NiHCF films are deposited onto glassy carbon electrodes by repetitive potential cycling in K(3)Fe(CN)(6)/NaNO(3)/Ni(NO(3))(2) solution. The modified electrodes exhibit a linear response to potassium ions in the concentration range 1x10(-3) to 2.0 mol dm(-3), with a near-Nernstian slope (45-49 mV per decade) at 25 degrees C. In the determination of potassium ion in syrups used for treatment of potassium deficiency, the NiHCF-modified electrode gave comparable results to those obtained using flame emission spectrophotometry.     

Voltammetric determination of isoprenaline in pharmaceutical preparations using a copper(II) hexacyanoferrate(III) modified carbon paste electrode

The electroanalytical determination of isoprenaline in pharmaceutical preparations of a homemade carbon paste electrode modified with copper(II) hexacyanoferrate(III) (CuHCF) was studied by cyclic voltammetry. Several parameters were studied for the optimization of the sensor such as electrode composition, electrolytic solution, pH effect, potential scan rate and interferences in potential. The optimum conditions were found in an electrode composition (in mass) of 15% CuHCF, 60% graphite and 25% mineral oil in 0.5 mol l⁻¹ acetate buffer solution at pH 6.0. The analytical curve for isoprenaline was linear in the concentration range from 1.96×10⁻⁴ to 1.07×10⁻³ mol l⁻¹ with a detection limit of 8.0×10⁻⁵ mol l⁻¹. The relative standard deviation was 1.2% for 1.96×10⁻⁴ mol l⁻¹ isoprenaline solution (n=5). The procedure was successfully applied to the determination of isoprenaline in pharmaceutical preparations; the CuHCF modified carbon paste electrode gave comparable results to those results obtained using a UV spectrophotometric method.     

Improving palladium-catalyzed cyanation of aryl halides: development of a state-of-the-art methodology using potassium hexacyanoferrate(II) as cyanating agent

Benzonitriles are easily accessible via palladium-catalyzed cyanation of aryl halides using potassium hexacyanoferrate(II) as cyanide source. This method is applicable on both activated and deactivated aryl and heteroaryl bromides and activated chlorides giving the corresponding benzonitriles in good to excellent yield. Advantageously, the used cyanating agent is non-toxic and cheap. The presented catalyst system is rather simple and it is not necessary to add expensive phosphines, making the novel method also attractive for industrial applications.     

Regioselective 1,4-conjugate hydrocyanation of dienones using potassium hexacyanoferrate(II) as an eco-friendly cyanide source

A highly regioselective 1,4-conjugate hydrocyanation of dienones using potassium hexacyanoferrate(II) as an original eco-friendly cyanide source, benzoyl chloride as a promoter and potassium carbonate as a catalyst is described. This protocol has advantages of non-toxic cyanating agent, high regioselectivity, high yield, and simple work-up procedure.     

Voltammetric determination of N-acetylcysteine using a carbon paste electrode modified with copper(II) hexacyanoferrate(III)

The preparation and electrochemical characterization of a carbon paste electrode modified with copper(II) hexacyanoferrate(III) (CuHCF) as well as its behavior as electrocatalyst toward the oxidation of N-acetylcysteine were investigated. The electrochemical behavior of the modified electrode and the electrooxidation of N-acetylcysteine were explored using sweep linear voltammetry. The best voltammetric response was observed for a paste composition of 20% (w/w) copper(II) hexacyanoferrate(III) complex, acetate buffer solution at pH of 6.0 as the electrolyte and scan rate of 10 mV s^− 1. A linear voltammetric response for N-acetylcysteine was obtained in the concentration range from 1.2 × 10^− 4 to 8.3 × 10^− 4 mol L^− 1, with a detection limit of 6.3 × 10^− 5 mol L^− 1. The proposed electrode is useful for the quality control and routine analysis of N-acetylcysteine in pharmaceutical formulations.     

Simultaneous Determination of Nickel(II) and Cobalt(II) by Second-Derivative Spectrophotometry

4-(2-Pyridylazo) resorcinol, PAR, is shown to be useful for simultaneous determination of cobalt(II) and nickel(II) using second-derivative spectrophotometric method with controlled experimental parameters. This method allows the determination of 0.20-1.25 ppm of nickel(II) and 0.25-1.50 ppm of cobalt(II) in mixtures with good precision and accuracy. This method has advantages of simplicity, speed and requires no prior separations.     

Simultaneous determination of nickel(II) and cobalt(II) by square wave adsorptive stripping voltammetry on a rotating-disc bismuth-film electrode

This works reports the use of square-wave adsorptive stripping voltammetry (SWAdSV) for the simultaneous determination of Ni(II) and Co(II) on a rotating-disc bismuth-film electrode (BFE). The metal ions in the non-deoxygenated sample were complexed with dimethylglyoxime (DMG) and the complexes were accumulated by adsorption on the surface of the BFE. The stripping step was carried out by using a square-wave potential-time voltammetric excitation signal. Electrochemical cleaning of the bismuth film was employed, enabling the same bismuth film to be used for a series of measurements. The experimental variables (choice of the working electrode substrate, the presence of oxygen, the DMG concentration, the buffer concentration, the preconcentration potential, the accumulation time, the rotation speed and the SW parameters) as well as potential interferences were investigated and the figures of merit of the methods were established. Using the selected conditions, the 3σ limits of detection were 70 ng l⁻¹ for Co(II) and 100 ng l⁻¹ for Ni(II) (for 300 s of preconcentration) and the relative standard deviations were 2.3% for Co(II) and 3.9% for Ni(II) at the 2 μg l⁻¹ level (n = 8). Finally, the method was applied to the determination of nickel and cobalt in real samples with satisfactory results.     

Syntheses and crystal structures of nickel(II), copper(II), and zinc(II) complexes with a biphenyl-bridged bis(pyrrole-2-yl-methyleneamine) ligand

The reactions of nickel(II), copper(II), and zinc(II) acetate salts with a potentially tetradentate biphenyl-bridged bis(pyrrole-2-yl-methyleneamine) ligand yielded three complexes with different coordination geometries. X-ray crystal structural analysis reveals that in the nickel(II) complex each nickel is five-coordinate, distorted trigonal bipyramid. In the copper(II) complex, each copper is four-coordinate, between square planar and tetrahedral. In the zinc(II) complex, each zinc is four-coordinate with a distorted tetrahedral geometry and the molar ratio of the zinc and ligand is 1 : 2.     

Intercalation of hydrotalcites with hexacyanoferrate(II) and (III)—a thermoRaman spectroscopic study

Raman spectroscopy using a hot stage indicates that the intercalation of hexacyanoferrate(II) and (III) in the interlayer space of a Mg, Al hydrotalcites leads to layered solids where the intercalated species is both hexacyanoferrate(II) and (III). Raman spectroscopy shows that depending on the oxidation state of the initial hexacyanoferrate partial oxidation and reduction takes place upon intercalation. For the hexacyanoferrate(III) some partial reduction occurs during synthesis. The symmetry of the hexacyanoferrate decreases from O_h existing for the free anions to D_3d in the hexacyanoferrate interlayered hydrotalcite complexes. Hot stage Raman spectroscopy reveals the oxidation of the hexacyanoferrate(II) to hexacyanoferrate(III) in the hydrotalcite interlayer with the removal of the cyanide anions above 250 °C. Thermal treatment causes the loss of CN ions through the observation of a band at 2080 cm⁻¹. The hexacyanoferrate (III) interlayered Mg, Al hydrotalcites decomposes above 150 °C.     

A study of complex equilibria of phenylglycine with nickel(II), copper(II) and zinc(II) in water and in water - methanol solution

The complex equilibria of the systems phenylglycine — nickel(II), copper(II) and zinc(II) in water and in water — methanol solution have been studied by computer analysis of potentiometric data. The mode of coordination has been established by¹³C-NMR and IR studies.

---

Gleichgewichtsuntersuchungen der Komplexbildung von Phenylglycin mit Nickel(II), Kupfer(II) und Zink(II) in Wasser und Wasser - Methanol-Lösung

Zusammenfassung Anhand einer Computer-Analyse von potentiometrischen Daten wurden die Bildungsgleichgewichte in den Systemen Phenylglycin — Nickel(II), Kupfer(II) und Zink(II) untersucht. Der Koordinationstyp wurde mittels¹³C-NMR und IR festgestellt. Die Lösungsmittel waren Wasser und Wasser — Methanol.

     

Cobalt(II) and nickel(II) complexes of a cyclam derivative as carriers in iodide-selective electrodes

The ligand 1,4,8-tri(n-octyl)-1,4,8,11-tetraazacyclotetradecane (L¹) containing pendant octyl groups has been synthesised. L¹ is a tetraazamacrocycle derived from the well-known cyclam unit, and the Ni²⁺ and Co²⁺ complexes, [Ni(L¹)]²⁺ and [Co(L¹)]²⁺, have been isolated and characterised. The ability of the nickel(II) and cobalt(II) complexes to act as anion receptors has been studied by using them as ionophores in membrane-based ion-selective electrodes (ISEs). The PVC membrane containing the complex [Ni(L¹)]²⁺ and 2-nitrophenyloctylether as plasticizer shows a Nernstian response against iodide in a concentration range from 1×10⁻¹ to 4×10⁻⁵ M I⁻ with a detection limit of 1.6×10⁻⁵ M I⁻ and a slope of 58.6 mV/pI⁻ at pH 7 (25 °C). In comparison, the electrode containing [Co(L¹)]²⁺ as ionophore gave a sub-Nernstian slope and a low lifetime. A comparison between the iodide-selective electrode containing [Ni(L¹)]²⁺ and other reported iodide-selective electrodes is also reported.     

Self-assembled monolayer of nickel(II) complex and thiol on gold electrode for the determination of catechin

Self-assembled monolayers of a nickel(II) complex and 3-mercaptopropionic acid on a gold electrode were obtained for determination of catechin by square wave voltammetry. The complex [Ni^IIL] with L = [N-(methyl)-N′-(2-pyridylmethyl)-N,N′-bis(3,5-di-tert-butyl-2-hydroxybenzyl)-1,3-propanediamine[nickel(II)] was synthesized and characterized by ¹H NMR, IR, and electronic spectroscopies and electrochemical methods. The optimized conditions obtained for the electrodes were 0.1 mol L⁻¹ phosphate buffer solution (pH 7.0), frequency of 80.0 Hz, pulse amplitude of 60.0 mV and scan increment of 10.0 mV. Under these optimum conditions, the resultant peak current on square wave voltammograms increases linearly with the concentration of catechin in the range of 3.31 × 10⁻⁶ to 2.53 × 10⁻⁵ mol L⁻¹ with detection limits of 8.26 × 10⁻⁷ mol L⁻¹. The relative standard deviation for a solution containing 1.61 × 10⁻⁵ mol L⁻¹ catechin solution was 2.45% for eight successive assays. The lifetime of the Ni(II) complex-SAM-Au electrode was investigated through testing every day over 4 weeks. The results showed apparent loss of activity after 20 days. The results obtained for catechin in green tea samples using the proposed sensor and those obtained by electrophoresis are in agreement at the 95% confidence level.     

Preparation of Thallium Hexacyanoferrate Film and Mixed‐Film Modified Electrodes with Cobalt(II) Hexacyanoferrate

Thallium hexacyanoferrate films have been prepared from various aqueous electrolyte solutions using consecutive cyclic voltammetry. The cyclic voltammograms recorded the direct deposition of thallium hexacyanoferrate films from the mixing of Tl³⁺ and [Fe(CN)₆]^3? ions from solutions of seven cations: Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, H⁺, and Tl⁺. An electrochemical quartz crystal microbalance (EQCM) and cyclic voltammetry were used to study the in situ growth of the thallium hexacyanoferrate films. The thallium hexacyanoferrate film shows a single redox couple with a formal potential between +0.6 V and +1.2 V, and shows a cation effect (H⁺, Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, and Tl⁺). A mixed film and a two‐layered modified electrodes composed of a thallium hexacyanoferrate film with cobalt(II) hexacyanoferrate film were prepared.     

Thermal decomposition of potassium hexanitronickelate(II) hydrate

The thermal decomposition of the complex K₄[Ni(NO₂)₆]·H₂O has been investigated over the temperature range 25-600 °C by a combination of infrared spectroscopy, powder X-ray diffraction, FAB-mass spectrometry and elemental analysis. The first stage of reaction is loss of water and isomerisation of one of the coordinated nitro groups to form the complex K₄[Ni(NO₂)₄(ONO)]·NO₂. At temperatures around 200 °C the remaining nitro groups within the complex isomerise to the chelating nitrite form and this process acts as a precursor to the loss of NO₂ gas at temperatures above 270 °C. The product, which is stable up to 600 °C, is the complex K₄[Ni(ONO)₄]·NO₂, where the nickel atom is formally in the +1 oxidation state.     

Potassium ion-selective electrode based on a cobalt(II)-hexacyanoferrate film-modified electrode

A potassium ion-selective electrode based on a cobalt(II)-hexacyanoferrate(III) (CHCF) film-modified glassy carbon electrode is proposed. The electroactive film is introduced onto the glassy carbon electrode surface by electrodeposition of cobalt, which forms a thin CHCF film on subsequent anodic scanning in KClHCl solution (pH 5.0–5.5) containing K₃Fe(CN)₆. The thickness of the film on the electrode surface can be controlled by changing the electrodeposition time and the concentrations of cobalt(II) and Fe(CN)^3?₆ ions. The modified electrode exhibits a linear response in the concentration range 1 × 10^?1 ?3 × 10^?5 M potassium ion activity, with a near-Nernstian slope (48–54 mV per decade) at 25 ± 1°C. The detection limit is 1 × 10^?5 M. The stability, response time and selectivity were investigated. The electrode exhibits good selectivity for potassium ion with the twelve cations investigated. The relative standard deviation is 1.5% (n=10). The effects of the thickness of the electroactive film and the pH of the solution on the electrode response were also investigated.     

Synthesis,characterization and crystal structure of a novel two-dimensional network formed by the reaction of a pyrazole ligand with nickel(II) ions

A new supramolecular complex, [NiCl₂(Hdmpz)₂(H₂O)₂] (Hdmpz = 3,5-dimethylpyrazole), has been synthesized and characterized by elemental analyses, mass spectrometry, conductivity measurements, IR and UV–Vis spectroscopies. The behavior of the complex in different solvents is described. The complex has also been characterized crystallographically: the Ni(II) atom is surrounded by two Cl atoms, two N atoms from Hdmpz and two molecules of water to attain a pseudo octahedral structure. All the ligands are trans-orientated. In this structure, intermolecular interactions have been identified and studied. Extended structure analyses revealed a novel two-dimensional network in the (1 0 0) plane formed by intermolecular O–H···Cl and N–H···Cl hydrogen bonding interactions.     

Synthesis and crystal structure characterization of iron(II), cobalt(II) and nickel(II) complexes with 1,3-bis(2-pyridylmethylthio)propane

Three new mononuclear complexes of nitrogen–sulfur donor sets, formulated as [Fe^II(L)Cl₂] (1), [Co^II(L)Cl₂] (2) and [Ni^II(L)Cl₂] (3) where L = 1,3-bis(2-pyridylmethylthio)propane, were synthesized and isolated in their pure form. All the complexes were characterized by physicochemical and spectroscopic methods. The solid state structures of complexes 1 and 3 have been established by single crystal X-ray crystallography. The structural analysis evidences isomorphous crystals with the metal ion in a distorted octahedral geometry that comprises NSSN ligand donors with trans located pyridine rings and chlorides in cis positions. In dimethylformamide solution, the complexes were found to exhibit Fe^II/Fe^III, Co^II/Co^III and Ni^II/Ni^III quasi-reversible redox couples in cyclic voltammograms with E_1/2 values (versus Ag/AgCl at 298 K) of +0.295, +0.795 and +0.745 V for 1, 2 and 3, respectively.     

Stripping voltammetric determination of mercury(II) at antimony-coated carbon paste electrode

A new procedure was elaborated to determine mercury(II) using an anodic stripping square-wave voltammetry at the antimony film carbon paste electrode (SbF-CPE). In highly acidic medium of 1 M hydrochloric acid, voltammetric measurements can be realized in a wide potential window. Presence of cadmium(II) allows to separate peaks of Hg(II) and Sb(III) and apparently catalyses reoxidation of electrolytically accumulated mercury, thus allowing its determination at ppb levels. Calibration dependence was linear up to 100 ppb Hg with a detection limit of 1.3 ppb. Applicability of the method was tested on the real river water sample.