Electrochemical glucose biosensor based on silver nanoparticles/multiwalled carbon nanotubes modified electrode

A novel glucose biosensor was fabricated by immobilizing glucose oxidase (GOx) on Ag nanoparticles-decorated multiwalled carbon nanotube (AgNP-MWNT) modified glass carbon electrode (GCE). The AgNP-MWNT composite membrane showed an improving biocompatibility for GOx immobilization and an enhancing electrocatalytic activity toward reduction of oxygen due to decoration of AgNPs on MWNT surfaces. The AgNPs also accelerated the direct electron transfer between redox-active site of GOx and GCE surface because of their excellent conductivity and large capacity for protein loading, leading to direct electrochemistry of GOx. The glucose biosensor of this work showed a lower limit of detection of 0.01 mM (S/N?=?3) and a wide linear range from 0.025 to 1.0 mM, indicating an excellent analytical performance of the obtained biosensor to glucose detection. The resulting biosensor exhibits good stability and excellent reproducibility. Such bionanocomposite provides us good candidate material for fabrication of biosensors based on direct electrochemistry of immobilized enzymes.     

A novel amperometric hydrogen peroxide biosensor based on electrospun Hb-collagen composite

In this paper, the hemoglobin (Hb)-collagen microbelt modified electrode with three-dimensional configuration was fabricated via the electrospinning method. Direct electron transfer of the Hb immobilized into the electrospun collagen microbelts was greatly facilitated. The apparent heterogeneous electron transfer rate constant (k(s)) was calculated to be 270.6s?1. The electrospun Hb-collagen microbelt modified electrode showed an excellent bioelectrocatalytic activity toward the reduction of H?O?. The amperometric response of the biosensor varied linearly with the H?O? concentration ranging from 5 × 10??molL?1 to 30×10??molL?1, with a detection limit of 0.37 × 10??molL?1 (signal-to-noise ratio of 3). The apparent Michaelis-Menten constant (K(m)(app)) was 77.7 μmolL?1. The established biosensor exhibited fast amperometric response, high sensitivity, good reproducibility and stability.     

An electrochemical biosensor for nitric oxide based on silver nanoparticles and hemoglobin.

A nitric oxide (NO) biosensor based on silver nanoparticles was fabricated with high sensitivity and selectivity as well as stability. Silver nanoparticles could preserve the microstructures of hemoglobin, but the electrochemical reactivity of the protein and its detection sensitivity toward NO could be greatly enhanced. Accordingly, a NO biosensor was developed. The linear concentration range was from 1.0 x 10(-6) to 5.0 x 10(-5) M. Its detection limit was 3.0 x 10(-7) M with a sensitivity of 0.0424 microA microM(-1) NO. The possible co-existing compounds would not interfere with the detection.     

An amperometric biosensor based on acetylcholinesterase immobilized onto iron oxide nanoparticles/multi-walled carbon nanotubes modified gold electrode for measurement of organophosphorus insecticides

An acetylcholinesterase (AChE) purified from maize seedlings was immobilized covalently onto iron oxide nanoparticles (Fe₃O₄NP) and carboxylated multi walled carbon nanotubes (c-MWCNT) modified Au electrode. An organophosphorus (OP) biosensor was fabricated using this AChE/Fe₃O₄/c-MWCNT/Au electrode as a working electrode, Ag/AgCl as standard and Pt wire as an auxiliary electrode connected through a potentiostat. The biosensor was based on inhibition of AChE by OP compounds/insecticides. The properties of nanoparticles modified electrodes were studied by scanning electron microscopy (SEM), Fourier transform infrared (FTIR), cyclic voltammograms (CVs) and electrochemical impedance spectroscopy (EIS). The synergistic action of Fe₃O₄NP and c-MWCNT showed excellent electrocatalytic activity at low potential (+0.4 V). The optimum working conditions for the sensor were pH 7.5, 35 °C, 600 μM substrate concentration and 10 min for inhibition by pesticide. Under optimum conditions, the inhibition rates of OP pesticides were proportional to their concentrations in the range of 0.1–40 nM, 0.1–50 nM, 1–50 nM and 10–100 nM for malathion, chlorpyrifos, monocrotophos and endosulfan respectively. The detection limits were 0.1 nM for malathion and chlorpyrifos, 1 nM for monocrotophos and 10 nM for endosulfan. The biosensor exhibited good sensitivity (0.475 mA μM⁻¹), reusability (more than 50 times) and stability (2 months). The sensor was suitable for trace detection of OP pesticide residues in milk and water.     

An amperometric sensor for uric acid based on ordered mesoporous carbon-modified pyrolytic graphite electrode

A novel amperometric sensor for uric acid based on ordered mesoporous carbon modified pyrolytic graphite electrode was developed. Uric acid oxidation was easily catalyzed by this electrode in a phosphate buffer solution at pH 7.0, with an anodic potential decrease about 140 mV compared to bare pyrolytic graphite electrode. The uric acid level was determined by the amperometric method, at a constant potential of 0.31 mV, the catalytic current of uric acid vs. its concentration showed a good linearity in the range of 1.0 × 10⁻⁶−1.0 × 10⁻⁴ mol L⁻¹, with a correlation coefficient of 0.999. The detection limit was 4.0 × 10⁻⁷ mol L⁻¹. The proposed method could be effectively used for uric acid amperometric sensing in human urine.     

A quercetin-modified biosensor for amperometric determination of uric acid in the presence of ascorbic acid

The present work reports a quercetin-modified wax-impregnated graphite electrode (Qu/WGE) prepared through an electrochemical oxidation procedure in quercetin-containing phosphate buffer solution (PBS), for the purpose of detecting uric acid (UA) in the presence of ascorbic acid (AA). During modification quercetin was oxidized to the corresponding quinonic structure, and in the blank buffer solution the electrodeposited film exhibits a voltammetric response anticipated for the surface-immobilized quercetin. Retarding effect of the film towards the reaction of anionic species was found; therefore the pH of sample solutions was selected to ensure the analyte in molecular form. At suitable pHs the Qu/WGE shows excellent electrocatalytic effect towards the oxidation of both AA and UA, and separates the voltammetric signal of UA from AA by about 280 mV, allowing simultaneous detection of these two species. A linear relation between the peak current and concentration was obtained for UA in the range of 1-50 μM in the presence of 0.5 mM AA, with a detection limit 1.0 μM (S/N = 3). This sensor was stable, reproducible and outstanding for long-term use.     

Development of an amperometric sulfite biosensor based on a gold nanoparticles/chitosan/multiwalled carbon nanotubes/polyaniline-modified gold electrode

A sulfite oxidase (SOx) purified from leaves of Syzygium cumini (Jamun) was immobilized covalently onto a gold nanoparticles (AuNPs)/chitosan (CHIT)/carboxylated multiwalled carbon nanotubes (cMWCNTs)/polyaniline (PANI) composite that was electrodeposited onto the surface of a gold (Au) electrode. A novel and highly sensitive sulfite biosensor was developed that used this enzyme electrode (SOx/AuNPs/CHIT/cMWCNT/PANI/Au) as the working electrode, Ag/AgCl as the standard electrode, and Pt wire as the auxiliary electrode. The modified electrode was characterized by Fourier transform infrared (FTIR) spectroscopy, cyclic voltammetry (CV), scanning electron microscopy (SEM), and electrochemical impedance spectroscopy (EIS) before and after the immobilization of the SOx. The sensor produced its optimum response within 3 s when operated at 50 mVs⁻¹ in 0.1 M phosphate buffer, pH 7.0, and at 35 °C. The linear range and detection limit of the sensor were 0.75–400 μM and 0.5 μM (S/N = 3), respectively. The biosensor was employed to determine sulfite levels in fruit juices and alcoholic beverages. The enzyme electrode was used 300 times over a period of three months when stored at 4 °C.     

An inhibition type amperometric biosensor based on tyrosinase enzyme for fluoride determination

In this study, a new biosensor based on the inhibition of tyrosinase for the determination of fluoride is described. To construct the biosensor tyrosinase was immobilized by using gelatine and cross-linking agent glutaraldehyde on a Clark type dissolved oxygen (DO) probe covered with a teflon membrane which is sensitive for oxygen. The phosphate buffer (50 mM, pH 7.0) at 30 °C were established as providing the optimum working conditions. The method is based on the measurement of the decreasing of dissolved oxygen level of the interval surface that related to fluoride concentration added into reaction medium in the presence of catechol. Inhibitor effect of fluoride results in decrease in dissolved oxygen concentration. The biosensor response depends linearly on fluoride concentration between 1.0 and 20 μM with a response time of 3 min.In the characterization studies of the biosensor some parameters such as reproducibility, substrate specificity and storage stability were carried out. From the experiments, the average value (x), Standard deviation (S.D) and coefficient of variation (C.V %) were found as 10.5 μM, ± 0.57 μM, 5.43%, respectively for 10 μM fluoride standard.     

Sensitive DNA biosensor improved by Luteolin copper(II) as indicator based on silver nanoparticles and carbon nanotubes modified electrode

A novel and sensitive electrochemical DNA biosensor has been developed for the detection of DNA hybridization. The biosensor was proposed by using copper(II) complex of Luteolin C₃₀H₁₈CuO₁₂ (CuL₂) as an electroactive indicator based on silver nanoparticles and multi-walled carbon nanotubes (Ag/MWCNTs) modified glassy carbon electrode (GCE). In this method, the 4-aminobenzoic acid (4-ABA) and Ag nanoparticles were covalently grafted on MWCNTs to form Ag/4-ABA/MWCNTs. The proposed method dramatically increased DNA attachment quantity and complementary ssDNA detection sensitivity for its large surface area and good charge-transport characteristics. DNA hybridization detection was performed using CuL₂ as an electroactive indicator. The CuL₂ was synthesized and characterized using elemental analysis (EA) and IR spectroscopy. Cyclic voltammetry (CV) and fluorescence spectroscopy were used to investigate the interaction between CuL₂ and ds-oligonucleotides (dsDNA). It was revealed that CuL₂ presented high electrochemical activity on GCE, and it could be intercalated into the double helices of dsDNA. The target ssDNA of the human hepatitis B virus (HBV) was quantified in a linear range from 3.23 × 10⁻¹² to 5.31 × 10⁻⁹ M (r = 0.9983). A detection limit of 6.46 × 10⁻¹³ M (3σ, n = 11) was achieved.     

A uric acid sensor based on electrodeposition of nickel hexacyanoferrate nanoparticles on an electrode modified with multi-walled carbon nanotubes

An electrode sensitive to uric acid was prepared by electrodeposition of nickel(II) hexacyanoferrate(III) on the surface of a glassy carbon electrode modified with multi-walled carbon nanotubes. The morphology of the material was characterized by scanning electron microscopy and Fourier transform infrared spectrometry. The modified electrode were characterized via cyclic voltammetry and amperometry (i - t). It exhibited efficient electron transfer ability and a strong and fast (< 3?s) response towards uric acid which is linear in the range from 0.1???M to 18???M, with a lower detection limit of 50 nM (at an S/N ratio of 3). In addition, the electrode exhibited good reproducibility and long-term stability.

Assay for uric acid level in rat striatum by a reagentless biosensor based on functionalized multi-wall carbon nanotubes with tin oxide

A novel reagentless amperometric uric acid biosensor based on functionalized multi-wall carbon nanotubes (MWCNTs) with tin oxide (SnO₂) nanoparticles has been developed. This was successfully applied to assay uric acid levels from an in vivo microdialysis sampling. Compared with unfunctionalized or traditional carboxylic acid (–COOH)-functionalized MWCNTs, the MWCNTs–SnO₂ electrode exhibited higher electrocatalytic oxidation to uric acid. Here, MWCNTs–SnO₂ may act as an efficient promoter, and the system exhibited a linear dependence on the uric acid concentration over the range from 1.0 × 10^–7 to 5.0 × 10^–4 mol L^–1. In addition, there was little ascorbic acid interference. The high sensitivity of the MWCNTs–SnO₂ modified enzyme electrode enabled the monitoring of trace levels of uric acid in dialysate samples in rat striatum.     

One-step construction of reagentless biosensor based on chitosan-carbon nanotubes-nile blue-horseradish peroxidase biocomposite formed by electrodeposition

A simple and controllable electrodeposition approach was established for one-step construction of novel reagentless biosensors by in situ formation of chitosan-carbon nanotubes-nile blue-horseradish peroxidase (CS-CNTs-NB-HRP) biocomposite film on electrode surface. The mediator effect of NB, conducting performance of CNTs and the biocompatible microenvironment of CS were combined by such one-step non-manual process. NB could interact with CNTs and resulted in good dispersion of CNTs-NB nanocomposites in aqueous solution. Cyclic voltammetry measurements demonstrated that electrons were efficiently shuttled between HRP and the electrode mediated by NB. The developed reagentless biosensor exhibited a fast amperometric response for the determination of H₂O₂ and 95% of the steady-state current was obtained within 2 s. The linear response of the reagentless biosensor for the determination of H₂O₂ ranged from 1.0 × 10⁻⁶ to 2.4 × 10⁻⁴ mol l⁻¹ with a detection limit of 1.2 × 10⁻⁷ mol l⁻¹. The biosensor exhibited high reproducibility and long-time storage stability. The as-prepared biosensor also showed effective anti-interference capability. The ease of the one-step non-manual technique and the promising feature of the biocomposite could serve as a versatile platform for fabricating electrochemical biosensors.     

Mediatorless amperometric bienzyme glucose biosensor based on horseradish peroxidase and glucose oxidase cross-linked to multiwall carbon nanotubes

We report on a bienzyme-channeling sensor for sensing glucose without the aid of mediator. It was fabricated by cross-linking horseradish peroxidase (HRP) and glucose oxidase (GOx) on a glassy carbon electrode modified with multiwalled carbon nanotubes (MWNTs). The bienzyme was cross-linked with the MWNTs by glutaraldehyde and bovine serum albumin. The MWNTs were employed to accelerate the electron transfer between immobilized HRP and electrode. Glucose was sensed by amperometric reduction of enzymatically generated H₂O₂ at an applied voltage of ?50 mV (vs. Ag/AgCl). Factors influencing the preparation and performance of the bienzyme electrode were investigated in detail. The biosensor exhibited a fast and linear response to glucose in the concentration range from 0.4 to 15 mM, with a detection limit of 0.4 mM. The sensor exhibited good selectivity and durability, with a long-term relative standard deviation of <5 %. Analysis of glucose-spiked human serum samples yielded recoveries between 96 and 101 %.

Highly sensitive uric acid biosensor based on individual zinc oxide micro/nanowires

We describe the use of individual zinc oxide (ZnO) micro/nanowires in an electrochemical biosensor for uric acid. The wires were synthesized by chemical vapor deposition and possess uniform morphology and high crystallinity as revealed by scanning electron microscopy, X-ray diffraction, and photoluminescence studies. The enzyme uricase was then immobilized on the surface of the ZnO micro/nanowires by physical adsorption, and this was proven by Raman spectroscopy and fluorescence microscopy. The resulting uric acid biosensor undergoes fast electron transfer between the active site of the enzyme and the surface of the electrode. It displays high sensitivity (89.74 μA cm^?2 mM^?1) and a wide linear analytical range (between 0.1 mM and 0.59 mM concentrations of uric acid). This study also demonstrates the potential of the use of individual ZnO micro/nanowires for the construction of highly sensitive nano-sized biosensors.

Voltammetric and amperometric determination of uric acid at a carbon-ceramic electrode modified with multi walled carbon nanotubes

The voltammetric behavior of uric acid (UA) was studied at a carbon-ceramic electrode modified with multi walled carbon nanotubes; which was developed via a simple procedure. UA can be effectively oxidized at the surface of the electrode and produced an anodic peak at about 0.29 V in pH 6.8 phosphate buffer solutions. The experimental parameters such as pH, accumulation time, and amount of multi walled carbon nanotubes were optimized for determination of UA. Under the optimum conditions, the anodic peak current in differential pulse voltammetry is linear to the UA concentration over the range from 2.5×10?7M to 1.0×10?4 M with a correlation coefficient of 0.998. The electrode exhibited good stability and could be easily regenerated. The relative standard deviation of the peak current obtained for a 5.0?×?10^?5 M UA solution was 1.0%. The influence of dopamine and ascorbic acid on the anodic peak current of UA was examined. This method was successfully applied for the determination of uric acid in human urine sample, and the recovery was 99.9%.     

Amperometric glutamate biosensor based on self-assembling glutamate dehydrogenase and dendrimer-encapsulated platinum nanoparticles onto carbon nanotubes

A novel amperometric biosensor based on self-assembling glutamate dehydrogenase (GLDH) and poly(amidoamine) dendrimer-encapsulated platinum nanoparticles (Pt-PAMAM) onto multiwall carbon nanotubes (CNTs) has been developed for the determination of glutamate. The formation of the self-assembled (GLDH/Pt-PAMAM)_n/CNTs construction was investigated by ζ-potential and high resolution transmission electron microscopy (HRTEM). The results indicated the uniform growth of the layer-by-layer nanostructures onto carboxyl-functionalized CNTs. The electrocatalytic property of the (GLDH/Pt-PAMAM)_n/CNTs modified electrode to glutamate in presence of NAD⁺ (β-nicotinamide adenine dinucleotide, 0.1 mM) was investigated at a low overpotential 0.2 V by electrochemical measurements. The results showed it had series of attractive characteristics, such as a large determination range (0.2-250 μM), a short response time (within 3 s), a high sensitivity (433 μA/mM⁻¹ cm²) and good stability (85% remains after 4 weeks).     

High stability amperometric biosensor based on enzyme entrapment in microgels

The preparation and characterization of an amperometric glucose biosensor based on the entrapment of glucose oxidase (GOx) in a polyacrylamide microgel is described. This study proves that polyacrylamide microgels provide an excellent matrix for GOx immobilization that can be used as a biological material in amperometric biosensors. The interference produced by ascorbic and uric acid has been eliminated by including acrylic acid in the polymeric matrix. With this modification, we obtain an adequate device for glucose determination in complex samples such as blood and serum. The study of the temperature effect in the response of biosensors indicates that swelling of the microgels directly influences the enzymatic activity. Thus, the behaviour of the enzyme in the swollen microgels is similar to the enzyme in solution, but the enzyme's activation energy increases when the water content in the microgels decreases. One important property of these biosensors is their remarkable stability. After 4 months of its manufacture, there is no loss in the initial response. Furthermore, the enzymatic activity of freeze-dried microgels containing enzyme remains unaltered for at least 18 months.     

A colorimetric probe for ascorbic acid based on copper-gold nanoparticles in electrospun nylon

We report on a colorimetric probe based on copper-gold alloy nanoparticles (NPs). The probe is capable of selectively detecting ascorbic acid (AA) as a result of the distance-dependent colour change of the nanoparticles immobilized in an electrospun nylon-6 nanofiber. The resulting white nanofibres undergo a colour change to blue as a result of the aggregation of the NPs induced by AA in the pH range 2–7. The probe is selective for AA even in the presence of dopamine, uric acid, saccharides, amino acids and certain organic acids. It covers the 1.76 x10^?2 mg L^?1 to 1.76 x10⁵ mg L^?1 concentration range, and exhibits a limit of detection of 1.76 x10^?2 mg L^?1 based on visual detection. Its application was demonstrated by the determination of ascorbic acid in fruit juices, urine, serum, and vitamin C tablets.

An amperometric glucose biosensor based on glucose oxidase immobilized in electropolymerized poly(o-aminophenol) and carbon nanotubes composite film on a gold electrode.

An amperometric glucose biosensor is developed that is based on immobilization of glucose oxidase (GOD) in a composite film of poly(o-aminophenol) (POAP) and carbon nanotubes (CNT), which are electrochemically co-polymerized at a gold (Au) electrode. Because of the high surface per volume ratio and excellent electrical conductivity of CNT, the biosensor based on an Au/POAP/CNT/GOD electrode has lower detection limit (0.01 mM), larger maximum response current (0.24 mA cm(-2)) and higher sensitivity (11.4 mA M(-1) cm(-2)) than the values of the biosensor based on an Au/POAP/GOD electrode. Additionally, the biosensor shows fast response time, large response current, and good anti-interferent ability for ascorbic acid, uric acid and acetaminophen. Good reproducibility and stability of the biosensor are also observed.     

A new amperometric bienzymatic biosensor based on biocomposites for the determination of gluconic acid in wines

A new amperometric bienzymatic biosensor for gluconic acid based on the coimmobilization of gluconokinase (EC 2.7.1.12) and phosphogluconate dehydrogenase (EC 1.1.1.44) by polysulfone membrane entrapment onto the surface of a graphite-epoxy composite is reported. This biosensor represents an alternative to gluconate dehydrogenase (EC 1.1.99.3) based methods, which is no longer commercially available. Measurements were done at an applied potential of +0.800 V, room temperature and phosphate buffer pH 7.50; obtaining a linear response range for gluconic acid extended from 7.0 × 10⁻⁶ to 2.5 × 10⁻⁴ M. Constructed biosensors showed good reproducibility for calibrations using different electrodes (RSD of 1.74%). Finally, biosensor was applied to real wine samples, and the results obtained were validated by comparison with those provided by a reference laboratory. Good correlation was found when the biosensor results were plotted vs. the reference values (slope = 1.03 ± 0.04, intercept = 0.01 ± 0.02, r² = 0.995).