Effect of fast protons on the molecular—topological structure and surface properties of tetrafluoroethylene—hexafluoropropylene copolymer

The topologically diblock structure of a tetrafluoroethylene—hexafluoropropylene copolymer with a total weight fraction of crystalline structures of 0.07 is transformed into a fully amorphous matrix with a pseudo-network structure after irradiation with 1—4 MeV protons. Instead of crystalline branching points (as in the unirradiated copolymer), cluster structures have appeared in the matrix. Oxidative degradation processes that occur during the bombardment result in significant functionalization of the copolymer and a substantial increase in the surface free energy, its acid—base component, and surface polarity.     

Amorphous Polymers’ Foaming and Blends with Organic Foaming-Aid Structured Additives in Supercritical CO2, a Way to Fabricate Porous Polymers from Macro to Nano Porosities in Batch or Continuous Processes

Organic polymers can be made porous via continuous or discontinuous expansion processes in scCO₂. The resulting foams properties are controlled by the interplay of three groups of parameters: (i) Chemical, (ii) physico-chemical, and (iii) technological/process that are explained in this paper. The advantages and drawbacks of continuous (extrusion, injection foaming) or discontinuous (batch foaming) foaming processes in scCO₂, will be discussed in this article; especially for micro or nano cellular polymers. Indeed, a challenge is to reduce both specific mass (e.g., ρ < 100 kg·m⁻³) and cell size (e.g., average pore diameter ϕ_average^pores < 100 nm). Then a particular system where small “objects” (coreshells CS, block copolymer MAM) are perfectly dispersed at a micrometric to nanometric scale in poly(methyl methacrylate) (PMMA) will be presented. Such “additives”, considered as foaming aids, are aimed at “regulating” the foaming and lowering the pore size and/or density of PMMA based foams. Differences between these additives will be shown. Finally, in a PMMA/20 wt% MAM blend, via a quasi one-step batch foaming, a “porous to nonporous” transition is observed in thick samples. A lower limit of pore size (around 50 nm) seems to arise.     

Routine Hptlc in Industrial Analysis: Process Control of Fermentations

Abstract

Quantitative HPTLC is a cost saving and reliable chromatographic routine method for the control of many fermentation processes, as for example the fermentation of penicillin V. The following substances are analyzed: lactose or sucrose, soya oil (against foaming), phenoxyacetic acid (precursor), penicillin V and p-hydroxypenicillin V, as final products. The derivatization after chromatography is performed with an automated spraying device, the measurement—perpendicularly to the direction of chromatography—and evaluation are computerized. The time requirements per sample range from 6 to 15 minutes, the pure analysis time per sample from 5 to 12 minutes. The break-down time of the complete HPTLC apparatus system is about 0,6% of the working time, all substances to be determined can be measured with one scanner, in every interval and sequence desired. The accuracy, expressed by the coefficients of variation (N = 8 – 9, on one plate), ranges from 1,6 to 3,0 %, for very low concentrations up to 6, 6%.     

Stabilization of bubbles and foams

This review summarizes the principal new developments reported in the research literature from 2000 (inclusive) to the present date, on the topic of foam and bubble stabilization, in the context of foods. The main areas covered are novel foamed products, processes and foaming agents; new methods of study; protein adsorption and competitive adsorption; surface rheology; particle-stabilized systems; modelling, simulation and theory.     

锌-钴双金属氰化络合物催化二硫化碳与氧化环己烯共聚研究

报道了锌-钴双金属氰化络合物(double metal cyanide complex,DMCC)催化CS2与氧化环己烯(CHO)直接共聚生成脂环族聚硫代碳酸酯的反应.傅立叶红外光谱(FTIR)及拉曼(Raman)光谱结果表明该共聚物端基为-OH和-SH结构;核磁共振(1H和13C-NMR)结果表明共聚物主链含碳酸酯-O(CO)O-链节和4种硫代碳酸酯-O(CO)S-、-S(CO)S-、-O(CS)S-和-S(CS)S-链节结构;气相色谱-质谱(GC-MS)联用结果表明产物中含有环硫环己烷及3种环状硫代碳酸酯.聚合物链结构和产物种类表明CS2/CHO共聚反应存在氧-硫原子交换反应过程.     

Block copolymers in the synthesis of gold nanoparticles. Two new approaches: Copolymer aggregates as reductants and stabilizers and simultaneous formation of copolymer aggregates and gold nanoparticles

In this article, innovative applications of amphiphilic triblock and pentablock copolymers in the synthesis of gold nanoparticles are reported. The synthesis of gold nanoparticles is performed using two methods. In the first method, micellar aggregates of block copolymers and AuCl₄^? ions directly react in water; the nanoparticles obtained by this method are variable in size and are associated with copolymer aggregates. In the second method, two processes take place simultaneously: the aggregation of block copolymers and the reduction of Au (III) by the copolymers to form nanoparticles. In contrast with the first method, in this case, the nanoparticles obtained are located inside the copolymer aggregates. In both methods of synthesis, the block copolymers act simultaneously as reducing and stabilizing agents. To understand the role of copolymer aggregates in the synthesis of nanoparticles, molecular simulation methods are used. The gold nanoparticles, copolymer aggregates, and nanocomposite systems are characterized using transmission electron microscopy and dynamic light scattering. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3069–3079     

Effects of monomer structures on the foaming processes and thermal properties of polyimide foams

Four polyimide (PI) foams were prepared from polyamide acid precursors. The effects of monomer structures on the foaming processes and thermal properties of PI foams were investigated. The foaming processes of PI foams were observed by a self‐made visualization device. The thermal properties of four PI foams were studied by the methods of dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and thermogravimetry/differential thermogravimetry (TG/DTG) analysis. The results indicated that the inflation onset temperatures and maximum inflation degrees of four precursors increased from 123 to 171°C and decreased from 28 to 15 times with the increasing rigidity of the precursor molecule, respectively. The glass transition temperatures, the 5% weight loss temperatures, the decomposed activation energies, and pre‐exponential factors of PI foams increased with increase in the rigidity of monomer. Copyright © 2009 John Wiley & Sons, Ltd.     

FT–IR microspectroscopy study of blends of ester functionalized ethylene–propylene copolymer with (vinylidene fluoride-hexafluoropropene) elastomer

An ethylene—propylene (EPR) copolymer functionalized with (1,2-dicarboethoxy)ethyl groups has been blended with a vinylidene fluoride—hexafluropropene elastomer (NML). The existence of intermolecular interactions involving mainly the carbonyl groups of the side chains of the functionalized copolymer and the methylene hydrogens of the fluoroelastomer through hydrogen bonding was shown by means of FT—IR spectroscopy. The structure and composition of some microdomains in the mixture was examined by means of FT—IR microspectroscopy.     

Miniemulsion copolymerization of vinyl acetate and butyl acrylate. I. Differences between the miniemulsion copolymerization and the emulsion copolymerization processes

Differences between the emulsion copolymerization and miniemulsion copolymerization processes, in terms of emulsifier adsorption, emulsion stability, polymerization kinetics, copolymer composition and dynamic mechanical properties were studied for the comonomer mixture of 50:50 molar ratio vinyl acetate (VA+)—butyl acrylate (BuA), using sodium hexadecyl sulfate (SHS) as a surfactant and hexadecane (HD) as a co-surfactant. The use of hexadecane with the appropriate SHS initial concentration led to a higher adsorption of surfactant, smaller droplet size, higher stability of the emulsions, lower polymerization rates, and larger latex particle size. The copolymer composition during the initial 70% conversion was found to be less rich in Vac monomer units for the miniemulsion process. The dynamic mechanical properties of the copolymer films showed less mixing between the BuA-rich core and the VAc-rich shell in the miniemulsion latexes compared to the conventional latex films.     

The effect of interfacial miscibility on the cell morphology of polyethylene terephthalate/bisphenol a polycarbonate blend foams

Annealing polyethylene terephthalate (PET)/polycarbonate (PC) blends enhance the transesterification reaction and increase the amount of copolymer at the interface of both polymers. The copolymer enhances the compatibility of PET with PC, because it contains both PET and PC blocks, which causes the interface between PET and PC to become fuzzy. When the PET/PC undergoes batch physical foaming with CO₂, the copolymer significantly changes the resulting cell morphology, that is, the annealing time. Before annealing or in the absence of the copolymer, bubble nucleation occurs and dominates growth at the interface. When the PET/PC blends are annealed, the interface impedes bubble nucleation and growth. The polymer is stretched at the interface by bubble growth, forming fibril‐like structures connecting two polymer domains at the interface. Increased annealing time causes the interface to become more homogeneous and makes heterogeneous bubble nucleation difficult. At higher copolymer concentrations, the interface of PET and PC becomes fuzzy and the cell morphology becomes like those of foamed homogeneous polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

1-甲基-3-(2-甲基丙烯酰乙基)-咪唑氯离子液体/ 苯乙烯无规共聚物及其CdTe量子点复合物的合成

以偶氮二异丁腈(AIBN)为引发剂, 通过自由基聚合制备了1-甲基-3-(2-甲基丙烯酰乙基)-咪唑氯离子液体和苯乙烯的无规共聚物P(MMEIM⁺Cl^--co-St). 用红外光谱、核磁共振氢谱和凝胶渗透色谱表征了共聚物的结构. 共聚物的氯仿溶液与巯基乙酸稳定的CdTe量子点水溶液混合, 通过静电相互作用复合组装, 得到澄清透明且稳定的CdTe/P(MMEIM⁺Cl^--co-St)纳米复合物的氯仿溶液. 复合物的紫外吸收光谱、荧光发射光谱和透射电子显微镜的表征结果表明, 量子点均匀分散于共聚物中, 无团聚, 且保持了量子点的荧光性能.     

PEP与阴离子表面活性剂复配体系泡沫性能的研究

研究了PEP型非离子表面活性剂分别与十二烷基苯磺酸钠（DBS）,十二烷基硫酸钠（SDS）形成复配体系的泡沫性能,讨论了浓度及配比的变化对泡沫性能的影响,结果表明起泡性和稳泡性皆随混合表面活性剂的浓度的上升而增强;在一定浓度下,随着PEP比例下降,起泡性和稳泡性也随着增大,并达到稳定值。     

新型温度敏感性自组装胶束P(NiPAAm-co-DMAA)-co-P(L-Ala)的合成和性能

通过原子转移自由基聚合(ATRP)合成了一种带有活性—NH2基团的温度敏感性亲水型共聚物P(NiPAAm-co-DMAA), 并将其作为引发剂, 合成了P(NiPAAm-co-DMAA)-co-P(L-Ala), 其分子量分布(PDI)在1.3左右. 聚合物通过自组装形成纳米胶束. 透射电镜(TEM)结果表明, 胶束大小200~300 nm, 具有明显的核壳结构. 共聚物的最低临界溶解温度(LCST)为45.5 ℃. 温度低于LCST时, 聚合物溶解形成胶束; 高于LCST时, 胶束解离, 聚合物不溶. 聚合物对温度的响应是快速而可逆的.     

Chromatomembrane methods: physicochemical principles, analytical and technological possibilities

Chromatomembrane methods and their origin, physicochemical principles, and analytical and technological possibilities are discussed. Advantages of these methods over traditional schemes of mass-exchange processes in liquid—gas and liquid—liquid systems are shown.     

Effect of gamma-irradiation on the foaming behavior of ethylene-co-octene polymers

Ethylene-co-octene polymers containing different branching levels were irradiated in air and under vacuum at 25, 50 and 100 kGy. Gel fraction measurements, thermal analysis and rheology were used to assess the effect of the treatment on polymer structure modifications. The copolymer with 24 wt% octene was shown to be more sensitive to gamma rays and degradation was observed in some cases. Cross-linking in the amorphous phase also occurred as a consequence of irradiation and affected the foaming behavior of these materials.     

Sphaerotilus natans isolated from activated sludge and its production of poly (3-hydroxybutyrate-co-3-hydroxyvalerate)

Sphaerotilus natans is a sheathed bacterium existing in the activated sludge of wastewater treatment plants. IT is one of the filamentous bacteria causing the bulking and foaming difficulties of activated sludge. Isolating the strain and culturing it in an axenic environment could not only provide the metabolic knowledge of the strains that would be useful in the development of wastewater treatment methods, but also could enable us to gain an understanding of the mechanism by which poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (poly[3-HB-co-3-HV]) is produced by this strain. This article reports the screening and isolation of the strain from the activated sludge using the Nile blue staining method together with Fourier transform infrared analysis. We investigated the ability of the selected strain to produce poly(3-HB-co-3-HV) copolymer using glucose and peptone, or by adding valeric acid or sodium propionate as precursor. Proper precursor feeding could dramatically enhance its 3HV content in the copolymer P(3HB-co-3HV). By controlling the different feeding times in fed-batch fermentation, different desired copolymers were obtained with 15, 40, and 70% 3HV mole fraction of the copolymer. Polymer properties were analyzed by gas chromatography, differential scanning calorimetry, thermo-gravimetry, and nuclear magnetic resonance analysis. Open laboratory of Chirotechnology of the Institute of Molecular Technology for Drug Discovery and Synthesis The University Grants Committee Area of Excellence Scheme (Hong Kong).     

A visualization system for observing plastic foaming processes under shear stress

Previous studies offered theories to explain shear-induced bubble nucleation and growth phenomena in plastic foaming processes, but empirical verification was limited due to difficulty in observing these processes in situ under an easily adjustable and uniform shear flow. This study presents a novel visualization system that successfully achieved this goal. The system allows easy control of the critical experimental parameters: applied shear strain, shear strain rate, temperature, pressure, pressure drop rate, plastic material and blowing agent. From a foaming visualization study of polystyrene, it was observed that cell nucleation rate and maximum cell density increased with the applied shear strain, which was due to the decreased local system pressure, detachment and growth of microvoids, and elongation of bubbles. This foaming visualization system provides a direct and effective way to investigate the mechanisms of bubble nucleation and growth under dynamic conditions that simulates industrial plastic foaming processes.     

荧光探针法对N-异丙基丙烯酰胺-丙烯酰胺共聚物水溶液相变的研究

合成了多种不同配比的N 异丙基丙烯酰胺 (NIPAM )与丙烯酰胺 (AM )的共聚物 .用荧光探针法研究了共聚物溶液荧光光谱随温度升高而引起的变化 .研究表明 :共聚物的最低临界溶液温度 (LCST)取决于AM与NIPAM的组成比 .AM的比例越大 .LCST就越高 ,且有较好的正比关系 .通过以共价键连接于共聚物的荧光探针法 (标记法 )和以小分子探针混入共聚物水溶液的方法 (混入法 )测定上述体系LCST的结果比较 ,发现标记探针法具有较高的灵敏度 ,更适宜用来研究共聚物水相体系的相变问题 .     

TRANSITION IN THE MELT OF FEP COPOLYMER

The nature of the transition in molten FEP copolymer was examined in relation to the enthalpy change, mechanical damping and melt viscosity. For a pre-heat-treated FEP copolymer sample a small endothermic peak appeared at 309—312 ℃in DSC trace with enthalpy change 0.03—0.05 cal/g. A peak was also detected in damping versus temperature curve at the same temperature range. The theological property of FEP copolymer melt was similar to that of liquid crystal, but no birefrigence was viewed in the melt. Therefore the transition was explained as the melting of small crystallites which persist in typical copolymer beyond its melting temperature. These crystallites can act as nuclei for crystallization upon cooling.     

Structure induced by irradiation of femtosecond laser pulse in dyed polymeric materials

We investigated the structures induced by an irradiation of a near‐infrared (NIR) femtosecond laser pulse in dye‐doped polymeric materials {poly(methyl methacrylate) (PMMA), thermoplastic epoxy resin (Epoxy), and a block copolymer of methyl methacrylate and ethyl acrylate‐butyl acrylate [p(MMA/EA‐BA) block copolymer]}. Dyes used were classified into two types—type 1 with absorption at 400 nm and type 2 with no absorption at 400 nm. The 400‐nm wavelength corresponds to the two‐photon absorption region by the irradiated NIR laser pulse at 800 nm. Type 1 dye‐doped PMMA and p(MMA/EA‐BA) block copolymer showed a peculiar dye additive effect for the structures induced by the line irradiation of a NIR femtosecond laser pulse. On the contrary, dye‐doped Epoxy did not exhibit a dye additive effect. The different results among PMMA, p(MMA/EA‐BA) block copolymer, and Epoxy matrix polymers are supposed to be related to the difference of electron‐acceptor properties. The mechanism of this type 1 dye‐additive‐effect phenomenon for PMMA and p(MMA/EA‐BA) block copolymer is discussed on the basis of two‐photon absorption of type 1 dye at 400 nm by the irradiation of a femtosecond laser pulse with 800 nm wavelength and the dissipation of the absorbed energy to the polymer matrix among various transition processes. Dyes with a low‐fluorescence quantum yield favored the formation of thicker grating structures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2800–2806, 2002