Design optimization of all-optical actively mode-locked ring laser based on cross-gain modulation in a semiconductor optical amplifier

A complete and detailed model is presented that describes the main physical phenomena that occur in an actively mode-locked fiber ring laser based on cross-gain modulation in a semiconductor optical amplifier employed as both the gain medium and mode-locking element. The relationship between key laser parameters and the output pulse characteristics is numerically analyzed to provide simple design rules and derive a set of necessary operational conditions. The adoption of these rules and the satisfaction of these conditions enables the optimization of the laser performance and the generation of short and high energy mode-locked output pulses.     

A novel actively and passively mode-locked semiconductor optical amplifier fiber ring laser

A novel actively and passively mode-locked semiconductor optical amplifier fiber ring laser was presented, where semiconductor optical amplifier provided cavity gain and introduced nonlinear polarization rotation, whereas, intensity modulator not only acted as modulator but also polarizer. The pulses with duration below 3 ps (FWHM) and peak power about 16 mW at a repetition rate of 10 GHz can be obtained in our system and the system stability may be enhanced. To investigate system parameters effects on mode-locked pulses, a theoretical model was developed.     

Numerical study of a harmonic mode-locked semiconductor optical amplifier fiber ring laser

An improved harmonic mode-locked Semiconductor optical amplifier (SOA) fiber ring lasers has been presented and numerically investigated based on the self-reproduction theory. The numerical result shows that a narrower optical pulse train with a more symmetrical-temporal shape can be obtained, when the modulation SOA is DC biased on high current, whereas the gain SOA is DC biased on the low current functions as a gain compensator in the experimental setup. Also, the system parameters effects on the characteristic of the harmonic mode-locked pulse have been investigated.     

Characterization of the train-average time-frequency parameters inherent in the low-power picosecond optical pulses generated by the actively mode-locked semiconductor laser with an external single-mode fiber cavity

The specific approach to characterizing the train-average parameters of low-power picosecond optical pulses with the frequency chirp, arranged in high-repetition-frequency trains, in both time and frequency domains is elaborated for the important case when the semiconductor laser is matched by an external single-mode fiber cavity and operates in the active mode-locking regime. This approach involves the joint Wigner time-frequency distributions, which can be created for those pulses due to exploitation of a novel interferometric technique. Practically, the InGaAsP/InP-heterolaser generating at the wavelength 1320 nm was used during the experiments carried out and an opportunity of reconstructing the corresponding joint Wigner time-frequency distributions was successfully demonstrated.     

A self-consistent model for a SOA-based fiber ring laser including the mode-locked pulse properties

In this paper, we present a self-consistent model of an optically mode-locked semiconductor fiber ring laser. The fiber laser uses a semiconductor optical amplifier (SOA) as the gain medium, while mode-locking is achieved by its gain modulation, via an external optical pulsed signal. We solved the model analytically developing a novel technique, where we have assumed double saturation of the SOA by both the mode-locked and the externally introduced pulsed signal. The study revealed the locus of the laser parameters to achieve mode-locking. In particular, it was found that SOA gain and energy of the externally introduced signal are two critical parameters that must simultaneously set properly for exact mode-locking. Another outcome of our analysis is that the study of the chirp parameter should be carried out keeping the nonlinear terms of the SOA gain. We have also investigated a slightly detuning regime of operation that revealed a fast change of the mode-locking process.     

Influence of the bias current on the output characteristics of a mode-locked fiber ring laser consisting of two SOAs

In this paper, after obtaining the mode-locked pulse shape with self-reproduction theory, the influence of the bias current on the output characteristics of a backward-optical-injection harmonic mode-locked fiber ring laser consisting of two semiconductor optical amplifiers (SOAs) has been numerically investigated. The results show that the mode-locked pulse with high peak power and narrow width can be obtained through reasonably adjusting the bias currents of the two SOAs.     

Quantitative evaluation of high repetition rate laser jamming effect on the pulsed laser rangefinder

Laser may cause disfunction or even damage to laser rangefinder. Based on evaluation rules of high repetition rate laser jam pulsed laser rangefinder, the principles of distance deception and blinding jamming were analysed and the jamming success rate was calculated. We also set up a calculation example for 100 kHz repetition rate laser jam certain type rangefinder. The result showed that we can obtain jamming grade and success rate, accomplish the quantitative evaluation of the laser jamming effect.     

Multiwavelength actively mode-locked fiber ring laser with a dispersion compensated cavity

A multiwavelength actively mode-locked fiber ring laser that utilises a single semiconductor optical amplifier as both a gain and mode-locking element is presented. It is verified experimentally that the number of mode-locked wavelengths may be maximised by compensating for the anomalous intra-cavity dispersion. This is achieved through the inclusion of an appropriate length of normal dispersion fiber in the laser cavity. Using this technique, the number of wavelengths simultaneously mode-locked at 10 GHz was increased from 2 to 5.     

Experimental study of actively mode-locked semiconductor laser with grating external cavity

In this paper,complete mode-locking optical pulses have been obtained froman actively mode-locked GaAs/GaAlAs semiconductor laser with grating external cavity.Theshortest optical pulse is 7.3 ps measured by second harmonic generation(SHG)autocorrelator.The repetition rate is 995.12 MHz and the central wavelength is 798.4 nm.The effect ofmodulation frequency,modulation current,and bias current on the optical pulses width areinvestigated.     

增益调制高重频脉冲光纤激光器实验研究

采用脉冲泵浦方案,研制出了基于增益调制技术的全光纤结构高重频脉冲激光器。采用电路直接调制的激光二极管作为泵浦源,双包层光纤作为增益介质,构造了光纤光栅选模的线形腔结构。实验中通过调整泵浦光脉冲宽度和光纤激光器谐振腔长度,得到了稳定的高重频脉冲。在100 kHz重复频率下,采用21 W的峰值泵浦功率和2.5 s的泵浦脉冲宽度,获得了1.06 m波长,脉冲宽度247 ns的稳定脉冲激光输出。脉冲峰值功率一致性好,平均功率长期功率稳定性为2%。观察并分析了由于纵模拍频在脉冲包络上产生的次脉冲特性。通过一级放大实现89.6 W输出。     

高重复率 高平均功率窄线宽KrF准分子激光系统的研究

本文报道—台自制的光学投影亚微米量级微细加工用的KrF准分子激光振荡-放大系统,并对其设计和运转性能加以讨论.该系统在200Hz重复率运转时其谱线漂移小于5×10~(-4)nm,谱线宽度为2.3×10~(-8)nm,平均功率达24.4W.     

Experimental investigations on the external cavity time signature in chaotic output of an incoherent optical feedback external cavity semiconductor laser

Chaotic dynamics of a semiconductor laser subject to incoherent optical feedback (IOF) are experimentally investigated, and the external cavity time are retrieved and measured from intensity time series of the laser output by using self-correlation function and the mutual information. Through moderating feedback strength and injection current of the laser, the external cavity time signature of the laser chaotic output is effectively attenuated, and then the security of such chaos encryption system can be assured to a certain degree.     

高重复率XeCl准分子激光器的放电特性

本文报道紫外预电离放电泵浦的高重复率XeCl准分子激光器的放电特性,分析了放电参数的改变对放电过程的影响.最佳转换效率达2.2%.     

A sequential discharge TEA CO2 laser with high repetition rate and high output power

In this paper, a novel excitation method named as sequential discharge is realized in a two-module TEA CO₂ laser by using a special rotating spark gap. It is demonstrated that the repetition rate and the output power of a laser can be multiplied through this method. For the two-module TEA CO₂ laser in the experiment, the repetition rate is 300 Hz and the average power is 356 W when each module discharges; the repetition rate is 600 Hz and the average power is 713 W when the two modules discharge sequentially.     

基于双折射双频激光器中的调频回馈位移测量研究

提出了一种基于双折射双频激光器中的调频回馈效应的位移测量系统，并在实验和理论两方面进行了研究.实验中保持回馈外腔长度不变，将一四分之一波片置于激光器内腔中，调制内腔长度，激光器的中心频率发生改变，激光器输出强度将发生周期性的变化.研究发现激光强度曲线的波动频率正比于回馈外腔长度与内腔长度之比.当该位移测量系统的外腔长度是内腔长度的6倍时，被测物体每移动半个光波长，激光强度波动12次，系统分辨率可以达到二十四分之一光波长.理论分析与实验结果相符合.研究表明该位移测量系统具有高分辨率、大测量范围、可工作于任意回馈水平等特点. 关键词： 调频回馈 位移测量 双折射双频激光器 强度波动频率     

高速线性光采样用被动锁模光纤激光器重复频率优化

线性光采样是一种测量基于先进调制码型的高速光信号的有效手段, 而被动锁模光纤激光器是其实施所需的关键组件. 本文在介绍线性光采样工作原理的基础上, 首次分析得到被动锁模光纤激光器重复频率与待测信号光线宽的约束关系, 对于正交相移键控(QPSK)信号, 当信号光线宽与采样光脉冲重复频率的比值小于1.5×10^-3 时, 高速信号的相位噪声对线性光采样带来的损伤可以忽略不计. 利用95.984 MHz重复频率的被动锁模光纤激光器对线宽为100 kHz速率为28 Gbaud的QPSK信号开展相关实验, 通过标准数字相干接收算法可以得到与传统高速示波器相同的星座图, 理论分析与实验结果完全符合. 这一研究结果有助于线性光采样用被动锁模光纤激光器的优化设计.     

Stable multiwavelength fiber ring laser with equalized power spectrum based on a semiconductor optical amplifier

We experimentally demonstrated a new structure of a multiwavelength semiconductor optical amplifier (SOA) ring laser based on a fiber Sagnac loop filter that can generate up to 25 stable output lasing wavelengths at room temperature. By varying the length of a polarization-maintaining (PM) fiber within the Sagnac loop filter, the wavelength spacing between the output lasing wavelengths can be changed to a desired value. By tuning a polarization controller (PC) within the Sagnac loop filter, stable multiwavelength 1550-nm operation with up to 17 lasing lines within 3 dB power level variation and with a wavelength spacing of ∼0.8 nm was achieved. The optical signal-to-noise ratios (OSNRs) of all the lasing wavelengths are greater than 40 dB.     

Low-repetition-rate,all-polarization-maintaining Yb-doped fiber laser mode-locked by a semiconductor saturable absorber

A low-repetition-rate, all-polarization-maintaining(PM)-fiber sub-nanosecond oscillator is presented, which is simple and low-cost, composed of standard components. The ring cavity is elongated by 114-m-long standard PM fiber, and passively mode-locked by a fiber pigtailed semiconductor saturable absorber. Linearly polarized pulses with 1.66 MHz repetition rate and 22 dB polarization extinction ratio are generated at a wavelength of 1030 nm, which is determined by an intracavity filter. In addition, to demonstrate that the oscillator is a good seed for high energy pulse generation, an all-fiber master oscillator power amplifier is built and amplified pulses with energy about 2 μJ are obtained.     

Analysis of multitone microwave signals on optical fiber system using external laser modulation

In this paper, we Analyze multitone microwave signals on optical fiber with different tone signals and utilizing various possibilities of regeneration and amplification by different means. We compare out the performance analysis of Erbium doped fiber amplifiers (EDFAs) and Semi-conductor Optical Amplifiers (SOA). One tone's frequency varies from 1 to 20 GHz through parametric runs and other has fixed frequency of 5 GHz and third harmonic tones may be monitored.     

High-frequency optical signal generation in a semiconductor laser by incoherent optical feedback

This work examines the feasibility of using incoherent optical feedback to generate high-frequency optical signals in a semiconductor laser. At a roundtrip feedback distance of 30 cm, a signal appears at around 1 GHz while the laser output is kept in single longitudinal mode and single polarization. The proposed method does not use any external modulation or saturable absorber. Some of the signal's properties are discussed as well.