Ag/TiO2光催化还原硝酸氮

利用化学还原法制备不同Ag掺杂量TiO₂纳米催化剂,采用TEM、XRD、XRF和UV-Vis对催化剂进行表征。考察了催化剂在紫外光(254 nm)和可见光照射下还原初始浓度100 mgN·L^-1水相硝酸氮的活性和效果。重点考察了紫外光照射下Ag掺杂量、不同空穴捕获剂(甲酸、甲醇、乙酸、乙醇、草酸、草酸钠等)及甲酸浓度对硝酸氮还原的影响;对硝酸氮转化率和总氮去除率、形成亚硝酸氮、氨氮浓度及氮气选择性的影响。甲酸浓度为0.030 mol·L^-1、Ag掺杂量为1.0wt%时催化剂效果最佳。此时,硝酸氮、总氮的转化率分别为98.43%、78.13%;亚硝酸氮浓度为零,转化的硝酸氮中只有20.76%转化为氨氮,氮气选择性为79.24%。可见光下进行光催化还原反应时,硝酸氮转化率仅37.98%,但氮气的选择性较高。     

Photodegradation of toluic acid isomers by UV/TiO2

This work elucidates the photodegradation of toluic acid isomers by UV/TiO₂. Effects of the toluic acid isomers, pH and form of TiO₂ on photodegradation are identified. The rate of photodegradation of toluic acid isomers in UV/TiO₂ obey the sequence p > o > m. Additionally, the reaction rates under acidic conditions exceed those under neutral and alkaline conditions.     

Enhancement of visible-light photocatalytic activity of Cu-doped TiO<Subscript>2</Subscript> nanoparticles

Bare TiO₂ and Cu-doped TiO₂ nanoparticles with different nominal doping amounts of Cu ranging from of 0.5 to 5.0 mol% were synthesized using the modified sol–gel method. The samples were physically characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Brunauer–Emmett–Teller-specific surface area, UV–Vis diffuse reflectance spectroscopy, zeta potential, X-ray photoelectron spectroscopy, inductively coupled plasma, and photoluminescence techniques. The Cu-doped TiO₂ exhibited good photocatalytic activity in mineralization of oxalic acid and formic acid under visible light irradiation. Photomineralization of oxalic and formic acids under visible light irradiation revealed greatly enhanced photoactivity exhibited by the 2.0 mol% Cu-doped TiO₂ photocatalyst compared to bare TiO₂ . The enhanced photocatalytic performance arises from copper ion doping in the TiO₂ structure, leading to an extended photoresponsive range, enhanced photogenerated charge separation, and transportation efficiency.     

In situ FTIR Study of the Adsorption of Formaldehyde, Formic Acid, and Methyl Formiate at the Surface of TiO2 (Anatase)

The catalytic properties of TiO₂ (anatase) in the reactions of formaldehyde oxidation and formic acid decomposition are examined. At 100–150°C, formaldehyde is converted into methyl formate with high selectivity regardless of the presence of oxygen in the reaction mixture. Formic acid is decomposed to CO and water. Surface compounds formed in the reactions of formaldehyde, formic acid, and methyl formate with TiO₂ (anatase) are identified by in situ FTIR spectroscopy. In a flow of a formaldehyde-containing mixture at 100°C, H-bonded HCHO, dioxymethylene species, bidentate formate, and coordinatively bonded HCHO are observed on the TiO₂ surface. In the adsorption of formic acid, H-bonded HCOOH and two types of formates (bidentate and unsymmetrical formates) are formed. In the adsorption of methyl formate, H-bonded HCOOCH₃, HCOOCH₃ coordinatively bonded via the carbonyl oxygen, and bidentate formate are identified.     

Quantitative Determination of Four Water-Soluble Compounds in Herbal Drugs from Lamiaceae Using Different Chromatographic Techniques

HPTLC-densitometric and HPLC–UV techniques were used for qualitative and quantitative determination of luteolin-7-O-glucuronide, lithospermic acid, rosmarinic acid and caffeic acid in several herbal drugs from the Lamiaceae family: Thymi herba, Serpylli herba, Majoranae herba and Menthae piperitae folium. Unmodified silica gel (HPTLC Si60) and silica gel chemically modified with aminopropyl groups (HPTLC NH₂) were used during the investigation process. Among HPTLC methods the best resolution and selectivity was achieved with mobile phases: diisopropyl ether–acetone–formic acid–water (50:30:10:10, v/v/v/v) and acetone–formic acid (85:15, v/v), respectively. Plates were densitometrically evaluated. Contents of analyzed compounds in the studied aqueous extracts prepared from herbal drugs were established using both techniques. The results from the HPTLC-densitometric analysis have been compared with those from HPLC–UV on a C18 column with acetonitrile–water–formic acid as a mobile phase. The chromatographic methods were validated for linearity, LOD, LOQ, repeatability, intermediate precision and recovery. An analysis of variance showed that the HPTLC-densitometric and HPLC–UV methods are equivalent and sufficiently precise for the estimation of polyphenolic compounds mentioned above, in investigated herbal drugs. All of the suggested methods (HPTLC NH₂, HPTLC Si60 and HPLC RP18) give results with good agreement.     

In-situ UV-Raman study on soot combustion over TiO2 or ZrO2-supported vanadium oxide catalysts

UV-Raman spectroscopy was used to study the molecular structures of TiO₂ or ZrO₂-supported vanadium oxide catalysts. The real time reaction status of soot combustion over these catalysts was detected by in-situ UV-Raman spectroscopy. The results indicate that TiO₂ undergoes a crystalline phase transformation from anatase to rutile phase with the increasing of reaction temperature. However, no obvious phase transformation process is observed for ZrO₂ support. The structures of supported vanadium oxides also depend on the V loading. The vanadium oxide species supported on TiO₂ or ZrO₂ attain monolayer saturation when V loading is equal to 4 (4 is the number of V atoms per 100 support metal ions). Interestingly, this loading ratio (V₄/TiO₂ and V₄/ZrO₂) gave the best catalytic activities for soot combustion reaction on both supports (TiO₂ and ZrO₂). The formation of surface oxygen complexes (SOC) is verified by in-situ UV Raman spectroscopy and the SOC mainly exist as carboxyl groups during soot combustion. The presence of NO in the reaction gas stream can promote the production of SOC. Supported by the National Natural Science Foundation of China (Grant Nos. 20473053, 20773163 and 20525621), the Beijing Natural Science Foundation (Grant No. 2062020), and the 863 Program of China (Grant No. 2006AA06Z346)     

Mn-Mo-W-O_x脱硝催化剂活性组分的配伍优化

采用等体积浸渍法制备系列Mn-Mo-W-O_x/堇青石和Mn-Mo-W-O_x/TiO_2催化剂,用于选择性催化还原NO.通过Mn、Mo、W 3种元素不同配比对催化剂配伍进行优化,确立Mn-Mo-W-O_x最佳配比.采用XRD、N_2-BET、PyIR、SEM以及XPS等表征分析催化剂的固相结构、比表面积、酸量、表面形貌和表面元素.结果表明:当Mn/Mo/W元素摩尔比为10∶0.5∶1,载体为TiO_2时,催化剂的催化性能最优.适量Mo掺入Mn-W-O_x催化剂可以增大其比表面积,提高催化剂表面L酸酸量以及Mn~(4+)离子浓度,从而有效提高了催化剂高温活性.载体替换为TiO_2时催化剂的比表面积和酸量明显提高,从而增强了催化剂的脱硝性能.     

Comparison of the substrate dependent performance of Pt-, Au- and Ag-doped TiO2 photocatalysts in H2-production and in decomposition of various organics

Pt-, Au- and Ag-deposited Degussa P25 photocatalysts [at 1% (m/m) noble metal loading] were prepared in which the noble metals are most likely to be very finely dispersed on the surface of the TiO₂ nanocrystals. Deposition of noble metals increased the photocatalytic efficiency (relative to the bare photocatalyst) in the decomposition of oxalic- and formic acid, while decreased it in phenol containing systems. In H₂-production, a very high quantum yield has been found for the Pt–TiO₂ photocatalyst in the presence of oxalic and formic acids as sacrificial reagents, which opens the possibility for the economic use of industrial side products (e.g., oxalic- and formic acid) for photocatalytic H₂-production.     

A Facile Molecular Precursor‐based Synthesis of Ag2Se Nanoparticles and Its Composites with TiO2 for Enhanced Photocatalytic Activity

The reactions of different silver(I) reagents AgX (X^?=iodide, trifluoroacetate, triflate) with selenoethers R₂Se (R=Me, tBu) in a variety of solvents were investigated in relation with their use as precursors for Ag₂Se nanomaterials. Different reaction conditions led to different reactivities and afforded either molecular complexes or metal selenide nanoparticles. The reactions leading to in situ formation of the metal selenide nanoparticles were then extended in the presence of commercial TiO₂ (P25) to prepare silver selenide–titania nanocomposites with different Ag/Ti ratios. These nanocomposites, well characterized by elemental analysis (Ag, Se), PXRD, TEM, BET, XPS and UV/Vis studies, were investigated as photocatalysts for the degradation of formic acid (FA) solution. The xAg₂Se‐TiO₂ nanocomposites (x=0.01, 0.13 and 0.25 mol %) exhibited a much higher catalytic activity as compared to P25, which is an established benchmark for the photocatalysis under UV light, and retained a good photocatalytic stability after recycling for several times.     

介孔钛纳米复合团簇应用于光热-光动力疗法

采用水热法合成了一种新型的介孔二氧化钛/碳/亚甲蓝复合纳米团簇(TiO_2@C-MB),并应用于肿瘤细胞的光动力(PDT)和光热治疗(PTT)。系统中介孔二氧化钛作为有效的光敏剂,MB作为重要的光敏添加剂以改善二氧化钛纳米晶的光化学效应,并将其光响应区域拓宽至光动力学疗法的理想治疗窗(650~900 nm)。柠檬酸在水热条件下被还原成碳并裹覆在二氧化钛表面。碳层表现出良好的光热效果,也充当多功能的电子受体以加速生成单线态氧。该纳米团簇不仅可以保持肿瘤细胞内部高浓度的MB和二氧化钛以产生大量的单线态氧杀死肿瘤细胞,而且可以避免MB退化失活。     

纳米TiO2表面接枝聚苯乙烯及其抗紫外老化研究

利用偶联剂γ-甲基丙烯酰氧基丙基三甲氧基硅烷(KH570)对纳米TiO₂进行表面预处理, 在此基础上通过分散聚合工艺制备聚苯乙烯(PSt)接枝包覆纳米TiO₂. 运用红外光谱、热重分析及透射电镜对处理前后纳米TiO₂进行了表征, 并通过紫外人工加速老化试验比较了表面处理前后纳米TiO₂对聚丙烯/聚苯乙烯(PP/PSt)体系的抗紫外老化性能. 结果显示: KH570与纳米TiO₂表面羟基进行了缩合, PSt在粒子表面实现了接枝聚合, 接枝率约为60% (w); PSt接枝包覆纳米TiO₂呈均匀的微球形, 纳米TiO₂被包覆于微球内部; PSt接枝包覆后纳米TiO₂在PP/PSt中的分散效果较改性前有显著的改进, 其抗紫外老化性能明显优于改性前体系.     

微波辐射对TiO2制备及其光催化氧化乙醛性能的影响

采用微波辐射与常规加热法由TiO₂溶胶制备出TiO₂催化剂，采用高频低功率微波-光催化装置考察了微波对两种催化剂上CH₃CHO光催化氧化转化率和产物分布的影响。结果表明，微波干燥制备的TiO₂晶体比普通加热制备的TiO₂晶体对乙醛有更高的光催化活性和更强的氧化能力，且它们对乙醛光催化氧化的途径不同，前者的初始中间体为甲醛和甲酸，后者的初始中间体却为乙酸。还发现，微波辐射对两种样品上乙醛的光催化转化率有不同的影响，对微波辐射法所制样品的影响比对常规加热法所制样品的影响显著。微波辐射通过场效应可加速光催化初始中间体的转化，但它不改变光催化反应的途径，反应途径取决于光催化剂的特性。     

CO2在纳米SiO2/TiO2悬浮体系中的光催化还原

用水热法合成了氧化硅改性的具有高比表面积、高催化活性的锐钛型二氧化钛, 并在其悬浮体系中将CO₂光催化还原合成甲醇. 采用XRD, TEM, 物理吸附, UV-Vis吸收光谱和FTIR等表征手段对催化剂结构特征进行了研究. 结果表明: 添加氧化硅后, 氧化硅和二氧化钛之间形成Si—O—Ti键, 抑制了TiO₂晶粒生长, 提高了锐钛型TiO₂的比表面积, 且随着含硅量的增加, SiO₂/TiO₂的UV吸收逐步蓝移, 禁带宽度增加. 还原反应结果表明: SiO₂/TiO₂具有光催化还原活性, 且随着含硅量的增加先增加后减小, 当SiO₂质量分数为3.5%时, SiO₂/TiO₂复合催化剂反应活性最强, 5 h内甲醇产量可达到21.0 mg/L, 并有少量甲醛生成.     

Functionalization of cotton fabrics with corona/air RF plasma and colloidal TiO2 nanoparticles

This study discusses the possibility of using a corona discharge at atmospheric pressure and air RF plasma at low pressure for the cotton fibre activation prior to deposition of colloidal TiO₂ nanoparticles in order to enhance antibacterial, UV protective and self-cleaning properties. X-ray photoelectron spectroscopy (XPS) analysis confirmed the presence of TiO₂ nanoparticles on the surface of cotton fibres. XPS elemental mapping indicated that TiO₂ nanoparticles were more evenly distributed across the surface of untreated and corona pre-treated cotton fabrics in comparison with RF plasma pre-treated fabric. Atomic absorption spectroscopy measurements revealed that the equivalent total content of TiO₂ in the cotton fabrics pre-treated by corona and RF plasma was 31% higher than in the fabric that did not undergo any treatment prior to loading of TiO₂ nanoparticles. In order to achieve maximum bacteria (Gram-negative bacteria Escherichia coli) reduction, untreated cotton fabric had to be loaded with colloidal TiO₂ nanoparticles twice, but only once following corona or RF plasma pre-treatment. Deposition of TiO₂ nanoparticles onto cotton fabrics provided maximum UV protective rating of 50+. Extraordinary photocatalytic activity of TiO₂ nanoparticles deposited onto cotton fabrics was proved by self-cleaning of blueberry juice stains and photodegradation of methylene blue in aqueous solution under UV illumination.     

TiO2纳米管阵列覆盖Si薄膜光催化还原CO2性能的研究

本工作采用CVD法在阳极氧化TiO2纳米管阵列膜表面沉积一层非晶Si膜,通过退火后得到晶化了的Si膜/TiO2纳米管阵列的复合结构,并初步就其光催化还原CO2制备碳氢化合物的活性进行研究。拉曼光谱(Raman)、X射线衍射(XRD)、场发射扫描电镜(FE-SEM)、高分辨透射电子显微镜(TEM)等微结构表征结果表明所制备的TiO2纳米管阵列的厚度为270 nm左右,管直径约为70 nm,管壁厚度约为16 nm。覆盖的Si膜已晶化,其厚度约为300 nm。通过高效液相色谱(HPLC)及总有机碳(TOC)来检测光催化还原液相产物中的甲酸及总有机碳含量,发现负载Si膜后的TiO2纳米管阵列光催化性能有所提高,在装有400cut滤光片氙灯照射2 h下TOC含量从21.2 mg.L-1增长到29.5 mg.L-1,表明Si与TiO2的复合可有效的提高光催化还原CO2的活性,这可能与该异质结结构可增加对光的吸收并且可降低光生空穴-电子对复合有关。光催化循环实验表明所制得的催化剂在循环5次后仍可保持91.6%的催化活性。     

Cooperative effect of Fe and Ti species over Fe–Ti–Ox catalysts on the catalytic hydrolysis performance of hydrogen cyanide

FeO_x, TiO₂, and Fe–Ti–O_x catalysts were synthesized and used in the catalytic hydrolysis of hydrogen cyanide (HCN). Nearly 100% HCN conversion was achieved at 250 °C over the Fe–Ti–O_x catalyst. TiO₂ rutile was detected over TiO₂, but not over Fe–Ti–O_x, which suggested that the interaction between Fe and Ti species could inhibit the TiO₂ phase transition. Furthermore, the interaction between Fe and Ti species over Fe–Ti–O_x could promote the selectivity of NH₃ and CO. The mechanism of hydrolysis of HCN over FeO_x, TiO₂, and Fe–Ti–O_x can be given as follows: HCN + H₂O → methanamide → ammonium formate → formic acid → H₂O + CO.     

NixCo3-xO4表面修饰对CdSe/TiO2纳米管阵列光电化学氧化水活性的影响

利用氨挥发诱导法在CdSe/TiO2纳米管阵列表面负载一层NixCo3-xO4。采用SEM、XRD、XPS、UV-Vis对样品进行表征,通过线性扫描伏安法测定光阳极的释氧电势来评价其光电水氧化活性。结果表明:表面NixCo3-xO4是尖晶石结构;相对于CdSe/TiO2纳米管阵列光阳极,NixCo3-xO4/CdSe/TiO2光阳极能将光电氧化水的过电势降低430 mV。Ni离子的引入使得NixCo3-xO4表面富含三价阳离子(Ni3+,Co3+),从而促进CdSe/TiO2光阳极光电水氧化的进行。     

Ag‐Enhanced TiO2–x/C Composites with Metal‐Organic Frameworks as Precursors for Photodegradation of Methyl Blue

A series of Ag‐enhanced TiO_2–x/C composites (Ag/TiO_2–x/C composites) with metal‐organic frameworks (MOFs) as precursors were prepared, and their photocatalytic activities were evaluated by the UV‐light driven photodegradation behaviors of methyl blue (MB). The as‐obtained samples were characterized by several techniques such as SEM, XRD, N₂‐adsorption, XPS, UV/Vis spectrophotometry and UV/Vis diffuse‐reflectance spectra. The best photocatalytic performance was achieved in Ag/TiO_2–x/C composite pyrolyzed at 1000 °C (ATC‐P10) due to rapid capture of electrons caused by silver doping, higher density of TiO_2–x lattice oxygen vacancies for better trapping of electrons, and high surface area due to reduction and evaporation of metallic Zn. No obvious deactivation was observed after 10 cycles of UV‐light degradation of MB under the same experimental conditions. This report reveals a new approach to prepare stable and highly efficient UV‐light‐driven photocatalysts for organic pollutants in water.     

Photodegradation of Caffeic Acid in W/O/W Emulsions in the Absence and in the Presence of TiO2

Caffeic acid, a natural phenol with antioxidant and sunscreen activity, can undergo photooxidation upon UV irradiation. The photodegradation of caffeic acid at different concentrations was assessed in water, at pH 4.0 and 6.0, without and with TiO₂. The study was then carried out on W/O/W emulsions entrapping the phenolic acid either in the inner or in the outer aqueous phase in the absence and in the presence of TiO₂, added in the external phase (pH 6.0 or 7.0). The degradation of caffeic acid followed a pseudo-zero order kinetic with an inverse dependence from its initial concentration; at increasing pH of the medium caffeic acid degraded faster. The addition of TiO₂ increased the initial photodegradation rate. Compared with water, W/O/W emulsions protected the phenol towards both the photodegradation and the photocatalytic activity of TiO₂. Multiple systems allowed to incorporate caffeic acid and TiO₂ in the same formulation avoiding any catalytic interactions.     

Synthesis of nanosized TiO2/SiO2 catalysts by the ultrasonic microemulsion method and their photocatalytic activity

Nanosized TiO₂/SiO₂ catalysts prepared by hydrolysis of titanium n-butoxide in microemulsion showed enhanced photocatalytic activity. In the presence of catalyst ME-2 and after 90 min irradiation by UV light, methylene blue was completely converted evidenced by the absence of its absorption band in the UV-Vis spectra. This catalyst demonstrated much better degradation ability than P-25 and naked TiO₂.