Oligothiophene catenanes and knots. Part II. Mono and dications. A theoretical study

Mono- and dications of catenanes and knots containing 16, 22, and 28 thiophene units have been studied at the BHandHLYP/3-21G* level of theory. The polaron localization and relaxation energies of monoionized molecules increase with dihedral angle between thiophene fragments, being higher for catenanes and knots compared to linear oligomers. Monoionization of catenanes results in the polaron localization at one macrocycle leaving another one intact. In all diionized oligomers, polaron pairs were found to be more stable than corresponding bipolarons. The energy difference between bipolaron and polaron pairs increases with the number of repeating units in oligomers for all studied molecular architectures. Singlet polaron pairs are more stable than triplet ones. The energy difference between triplet and singlet states does not exceed 7-8 kcal/mol and decreases with the number of thiophene units in oligomers. Two different singlet minima were found for diionized catenanes. In the first one (the most stable), each macrocycle loses one electron, and in the other one, the polaron pairs are located at one macrocycle, leaving another intact. The energy difference between two minima decreases with the number of repeating units in catenanes.     

Spectroscopic and Electrochemical Properties of Catenanes Containing the 2,7-Diazapyrenium Unit

Abstract

The spectroscopic and electrochemical properties of two cyclophanes containing one and, respectively, two 2,7-diazapyrenium electron-acceptor units, and of their [2]catenanes with macrocycles containing two dioxybenzene or dioxynaphthalene electrondonor units have been investigated. The absorption spectra of the catenanes show weak and broad bands in the visible region, assigned to charge-transfer (CT) interactions. The very strong and structured fluorescence (298 K) and the structured fluorescence and phosphorescence (77 K) of the diazapyrenium unit are maintained in the two cyclophanes, but they are no longer present in the [2]catenanes, presumably because of a quenching process caused by the lower energy CT excited states. Each diazapyrenium unit undergoes two distinct reduction processes - only the first one of which is fully reversible - that are hardly affected at all when the diazapyrenium units are incorporated in a cyclophane. In the [2]catenanes, the CT interaction displaces the reduction processes of the diazapyrenium units toward more negative potentials. The results obtained for the diazapyrenium and previously investigated 4,4′-bipyridinium salts, selected cyclophane derivatives, and some [2]catenanes obtained by interlocking the cyclophanes with macrocycles containing two dioxyaromatic electron-donor units are compared and discussed.     

Dynamic chirality: keen selection in the face of stereochemical diversity in mechanically bonded compounds

The template-directed syntheses, employing bisparaphenylene-[34]crown-10 (BPP34C10), 1,5-dinaphthoparaphenylene-[36]crown-10 (1/5NPPP36C10), and 1,5-dinaphtho-[38]crown-10 (1/5DNP38C10) as templates, of three [2]catenanes, whereby one of the two bipyridinium units in cyclobis(paraquat-p-phenylene) is replaced by a bipicolinium unit, are described. The crude reaction mixtures comprising the [2]catenanes all contain slightly more of the homologous [3]catenanes, wherein a "dimeric" octacationic cyclophane has the crown ether macrocycles encircling the alternating bipyridinium units with the bipicolinium units completely unfettered. X-ray crystallography, performed on all three [2]catenanes and two of the three [3]catenanes reveals co-conformational and stereochemical preferences that are stark and pronounced. Both the [3]catenanes crystallize as mixtures of diastereoisomers on account of the axial chirality associated with the picolinium units in the solid state. Dynamic (1)H NMR spectroscopy is employed to probe in solution the relative energy barriers for rotations by the phenylene and pyridinium rings in the tetracationic cyclophane component of the [2]catenanes. Where there are co-conformational changes that are stereochemically "allowed", crown ether circumrotation and rocking processes are also investigated for the relative rates of their occurrence. The outcome is one whereby the three [2]catenanes containing BPP34C10, 1/5NPPP36C10, and 1/5DNP38C10 exist as one major enantiomeric pair of diastereoisomers amongst two, four, and eight diastereoisomeric pairs of enantiomers, respectively. The diastereoisomerism is a consequence of the presence of axial chirality together with helical and/or planar chirality in the same interlocked molecule. These [2]catenanes constitute a rich reserve of new stereochemical types that might be tapped for their switching and mechanical properties.     

Structural and co-conformational effects of alkyne-derived subunits in charged donor-acceptor [2]catenanes

Four donor-acceptor [2]catenanes with cyclobis(paraquat-p-phenylene) (CBPQT4+) as the pi-electron-accepting cyclophane and 1,5-dioxynaphthalene (DNP)-containing macrocyclic polyethers as pi-electron donor rings have been synthesized under mild conditions, employing Cu+-catalyzed Huisgen 1,3-dipolar cycloaddition and Cu2+-mediated Eglinton coupling in the final steps of their syntheses. Oligoether chains carrying terminal alkynes or azides were used as the key structural features in template-directed cyclizations of [2]pseudorotaxanes to give the [2]catenanes. Both reactions proceed well with precursors of appropriate oligoether chain lengths but fail when there are only three oxygen atoms in the oligoether chains between the DNP units and the reactive functional groups. The solid-state structures of the donor-acceptor [2]catenanes confirm their mechanically interlocked nature, stabilized by [pi...pi], [C-H...pi], and [C-H...Omicron] interactions, and point to secondary noncovalent contacts between 1,3-butadiyne and 1,2,3-triazole subunits and one of the bipyridinum units of the CBPQT4+ ring. These contacts are characterized by the roughly parallel orientation of the inner bipyridinium ring system and the 1,2,3-triazole and 1,3-butadiyne units, as well as by the short [pi...pi] distances of 3.50 and 3.60 A, respectively. Variable-temperature 1H NMR spectroscopy has been used to identify and quantify the barriers to the conformationally and co-conformationally dynamic processes. The former include the rotations of the phenylene and the bipyridinium ring systems around their substituent axes, whereas the latter are confined to the circumrotation of the CBPQT4+ ring around the DNP binding site. The barriers for the three processes were found to be successively 14.4, 14.5-17.5, and 13.1-15.8 kcal mol-1. Within the limitations of the small dataset investigated, emergent trends in the barrier heights can be recognized: the values decrease with the increasing size of the pi-electron-donating macrocycle and tend to be lower in the sterically less encumbered series of [2]catenanes containing the 1,3-butadiyne moiety.     

Planar beta-linked oligothiophenes based on thieno[3,2-b]thiophene and dithieno[3,2-b:2',3'-d]thiophene fused units

A series of planar beta-linked oligothiophenes based on thieno[3,2-b]thiophene and dithieno[3,2-b:2',3'-d]thiophene fused units were synthesized. The optical data indicate a blue shift of the absorption maximum in comparison to the alpha-linked analogues due to cross-conjugation between fused rings. The crystal structures of 3,3'-bi(thieno[3,2-b]thiophene) and 3,3';6',3"-ter(thieno-[3,2-b]thiophene) reveal edge-to-face pi-stacked dimer motifs, whereas the crystal structure of 3,3'-bis(dithieno[3,2-b:2',3'-d]thiophene) consists of face-to-face pi-stacked molecules. [structure: see text]     

Cycloparaphenylenes and Their Catenanes: Complex Macrocycles Unveiled by Ion Mobility Mass Spectrometry

The insoluble product mixture obtained from cycloparaphenylene (CPP) synthesis from Suzuki coupling and reductive aromatization was analyzed. Traditional mass spectrometry suggests a homologous series of macrocycles with 12 to 84 phenylene units. Ion‐mobility mass spectrometry, however, unravels an unexpected complexity of isomers with identical chemical formula, but different topologies. Whereas macrocycles containing up to 30 phenylene units show only one structure, the homologue with 36 phenylene units forms at least four different isomers with significant molecular size differences. They can be assigned to catenanes composed of CPPs with 2×18 and 12+24 phenylene units together with the ordinary [36]CPP macrocycle. Most likely, a trefoil knot of the CPP with 36 moieties is also present. For the first time, catenanes can be elucidated in a simple reaction mixture by analyzing their ions in the gas phase, an analysis which lies beyond the scope of traditional analytical methods.     

Crystal engineering for pi-pi stacking via interaction between electron-rich and electron-deficient heteroaromatics

New dipolar compounds containing alternating electron-rich thieno[3,2-b]thiophene units and electron deficient units have been synthesized. Compounds with 5-pyrimidinyl (compound 2) or benzothiazole (compound 5) as the electron-deficient unit were structurally characterized by the single-crystal X-ray diffraction method. The arrangement of the molecules is found to be one-dimensional slipped-pi-stack for 2. That of 5 is of slipped-pi-stack, albeit with a tilt angle between neighboring pi-stacks. The pi-pi interfacial distances of the molecules in the crystal lattice are 3.47 and 3.59 A for 2 and 5, respectively. On the basis of the crystal structure, compound 2, with negligible pi-pi slip along the short axis of the molecules, has a calculated electronic coupling value (0.153 eV) twice as large as that of the largest coupling of pentacene. Accordingly, the theoretically estimated hole mobility (mu(+)) for 2 (2.32 cm(2) s(-1) V(-1)) compares favorably with that of pentacene (1.93-5.43 cm(2) s(-1) V(-1)), despite of the larger reorganization energy for hole transport in 2. The symmetric intrastack S...C contacts found between the thieno[3,2-b]thiophene and pyrimidinyl units explain the unique features of the crystal structure of 2 and the resulting large electronic coupling.     

Syntheses and dynamics of donor-acceptor [2]catenanes in water

A subset of mechanically interlocked molecules, namely, donor-acceptor [2]catenanes, have been produced in aqueous solutions in good yields from readily available precursors. The catenations are templated by strong hydrophobic and [π···π] stacking interactions, which serve to assemble the corresponding supramolecular precursors, prior to postassembly covalent modification. Dynamic (1)H NMR spectroscopic investigations performed on one of these [2]catenanes reveal that the pirouetting motion of the butadiyne-triethylene glycol chain occurs with a dramatically lower activation enthalpy, yet with a much higher negative activation entropy in water, compared to organic solvents. The preparations of mechanically interlocked molecules in water constitute the basis for the future development of complex functional molecular machinery in aqueous environments.     

Translational isomerism and dynamics in multi-hydroquinone derived porphyrin [2]- and [3]-catenanes

A series of porphyrins strapped with polyether chains containing two or three 1,4-dioxybenzene units has been synthesised with a view to the production of porphyrin-containing [2] and [3]catenanes, where the porphyrin is strapped between ortho-positions of 5,15-(meso)-diaryl groups, and is interlinked with the bipyridinium macrocycle cyclobis(paraquat-4,4'-biphenylene). The porphyrins were isolated as mixtures of atropisomers, where the linking strap spans across the face of the porphyrin (alpha,alpha-isomer), or 'twisted' around its side (alpha,beta-isomer). Their structures were determined by detailed 1H NMR spectroscopy. The bis-1,4-dioxybenzene-strapped derivatives were shown to undergo atropisomerisation on heating, to produce an equilibrium mixture. Catenation under high pressure conditions of the mixture, or of the individual isomers, produced only a single catenane, that of the alpha,alpha-isomer. Its structure was determined by mass spectral and dynamic NMR measurements. Rates were determined for: (i) translational motion or 'shuttling' between 1,4-dioxybenzenes; (ii) 'rotation' of the macrocycle around the 1,4-dioxybenzene axis; and (iii) 'rocking' of the 1,4-dioxybenzene within the macrocycle. The atropisomers of the strapped derivatives containing three 1,4-dioxybenzene units were also separated, and subjected to catenation. Both [2]- and [3]catenanes were isolated, and were shown to be stable to further atropisomerisation. Their solution structures were probed in detail by dynamic 1H NMR measurements. The rates for shuttling and rotation were obtained in certain cases, although the complexity of the spectra of the [3]catenanes prevented a more detailed investigation.     

Molecular catenation via metal-directed self-assembly and pi-donor/pi-acceptor interactions: efficient one-pot synthesis, characterization, and crystal structures of [3]catenanes based on Pd or Pt dinuclear metallocycles

Dinuclear square metallocycles 3a,b assemble spontaneously when M(en)(OTf)2 (M = Pd, Pt) and a 4,4'-bipyridinium ligand are mixed in acetonitrile. Six new [3]catenanes were prepared in good yields by thermodynamically driven self-assembly reaction of molecular squares 3a,b and pi-complementary dioxoaryl cyclophanes. Single-crystal X-ray analyses of the [3]catenanes revealed the insertion of two aromatic units inside the metallocycle cavity. The structures are stabilized by means of a combination of pi-pi stacking, [C-H...pi] interactions, and [C-H...O] hydrogen bonds. [3]Catenane (DB24C8)2-(3a) showed in solid-state two external DB24C8 rings positioned over the Pd(en) corners, which are held in position by [N-H...O] hydrogen bonds. Furthermore, formation of catenane (DB24C8)2-(3a) can be switched off and on in a controllable manner by successive addition of KPF6 and 18-crown-6.     

2]Catenane assembly from calix[4]arene crown ethers [In Process Citation

A variety of novel calix[4]arene-incorporating crown ethers with or without intramolecular hydrogen bonding have been prepared by two efficient methods and utilized as donor rings to assemble calix[4]arene [2]catenanes based on pi-stacking interaction between hydroquinone and bipyridinium units. Treatment of calix[4]arene crown ethers 4, 10a, or 10b, whose cone conformation was fixed by intramolecular hydrogen bonding within the calix[4]arene moiety, with dicationic salt 15 x 2PF6 and dibromide 16 afforded the corresponding [2]catenanes 17a x 4PF6, 17b x 4PF6, and 17c x 4PF6 in 20%, 53%, and 55% yields, respectively, whereas from the reactions of 15 x 2PF6 and dibromide 16 in the presence of conformationally flexible 11 or 12 with a cone conformation kept by two propyl groups, [2]catenanes 18 x 4PF6 and 19 x 4PF6 were obtained in 12% and 6% yields. [2]Catenanes 21a x 4Cl, 21b x 4Cl, and 21c x 4Cl, incorporating calix[4]arene in both the donor and acceptor rings, were also successfully assembled from 10a or 10b, 16, and dicationic salts 20a x 2PF6 or 20b x 2PF6. The dynamic 1H NMR and absorption spectra of the [2]catenanes have been investigated, which revealed a strongest donor-acceptor interaction in 17a x 4PF6 and that the cone [2]catenanes 17a-c x 4PF6 can isomerize to the partial cone isomer at high temperature. The difference of the dynamic properties of these catenanes was discussed. The results demonstrate that catenation is one new general method to change the conformational distributions of calix[4]arenes.     

Highly Selective Synthesis of Iridium(III) Metalla[2]catenanes through Component Pre‐Orientation by π⋅⋅⋅π Stacking

A series of molecular metalla[2]catenanes featuring Cp*Ir vertices have been prepared by the template‐free, coordination‐driven self‐assembly of dinuclear iridium acceptors and 1,5‐bis[2‐(4‐pyridyl)ethynyl]anthracene donors. The metalla[2]catenanes were formed by using a strategically selected linker type that is capable of participating in sandwich‐type π–π stacking interactions. In the solid state, the [2]catenanes adopt two different configurations depending on the halogen atoms at the dinuclear metal complex bridge. Altering the solvent or the concentration, as well as the addition of guest molecules, enabled controlled transformations between metalla[2]catenanes and tetranuclear metallarectangles.     

Donor–Acceptor [2]- and [3]Catenanes Assembled from Versatile Pre-Organized Cp*Rh/Ir-Directed Pseudorotaxane Tectons

A stepwise self-assembly protocol has been used to synthesize [2]- and [3]catenanes. Firstly, binuclear Cp*Rh/Ir-directed (Cp*=pentamethylcyclopentadienyl) pseudorotaxanes were prepared through self-assembly, driven by donor–acceptor interactions between electron-deficient naphthalenediimide (NDI) units and an electron-rich crown ether. Subsequently, the pre-organized pseudorotaxanes were applied as tectons for self-assembly of [2]- and [3]catenanes by combination with very simple linkers. The structures of the catenanes were confirmed by NMR spectroscopy, ESI mass spectrometry, single-crystal X-ray diffraction analysis, and elemental analysis.     

The synthesis of polycyclic thiophenes derived from phenanthrene intermediates

The synthesis of benzo[b]triphenyleno[2,1-d]thiophene ( 9 ), benzo[b]triphenyleno[1,2-d]thiophene ( 13 ), 5-methylbenz[7,8]anthra[2,1-b]thiophene ( 17 ), l-methylchryseno[3,4-b]thiophene ( 18 ), triphenyleno[1,2-c]dibenzothiophene ( 22 ), triphenyleno[2,1-a]dibenzothiophene ( 26 ), triphenyleno[1,2-a]dibenzothiophene ( 29 ), and triphenyleno[2,1-b]dibenzothiophene ( 30 ) is described.     

Controlling switching in bistable [2]catenanes by combining donor-acceptor and radical-radical interactions

Two redox-active bistable [2]catenanes composed of macrocyclic polyethers of different sizes incorporating both electron-rich 1,5-dioxynaphthalene (DNP) and electron-deficient 4,4'-bipyridinium (BIPY(2+)) units, interlocked mechanically with the tetracationic cyclophane cyclobis(paraquat-p-phenylene) (CBPQT(4+)), were obtained by donor-acceptor template-directed syntheses in a threading-followed-by-cyclization protocol employing Cu(I)-catalyzed azide-alkyne 1,3-dipolar cycloadditions in the final mechanical-bond forming steps. These bistable [2]catenanes exemplify a design strategy for achieving redox-active switching between two translational isomers, which are driven (i) by donor-acceptor interactions between the CBPQT(4+) ring and DNP, or (ii) radical-radical interactions between CBPQT(2(?+)) and BIPY(?+), respectively. The switching processes, as well as the nature of the donor-acceptor interactions in the ground states and the radical-radical interactions in the reduced states, were investigated by single-crystal X-ray crystallography, dynamic (1)H NMR spectroscopy, cyclic voltammetry, UV/vis spectroelectrochemistry, and electron paramagnetic resonance (EPR) spectroscopy. The crystal structure of one of the [2]catenanes in its trisradical tricationic redox state provides direct evidence for the radical-radical interactions which drive the switching processes for these types of mechanically interlocked molecules (MIMs). Variable-temperature (1)H NMR spectroscopy reveals a degenerate rotational motion of the BIPY(2+) units in the CBPQT(4+) ring for both of the two [2]catenanes, that is governed by a free energy barrier of 14.4 kcal mol(-1) for the larger catenane and 17.0 kcal mol(-1) for the smaller one. Cyclic voltammetry provides evidence for the reversibility of the switching processes which occurs following a three-electron reduction of the three BIPY(2+) units to their radical cationic forms. UV/vis spectroscopy confirms that the processes driving the switching are (i) of the donor-acceptor type, by the observation of a 530 nm charge-transfer band in the ground state, and (ii) of the radical-radical ilk in the switched state as indicated by an intense visible absorption (ca. 530 nm) and near-infrared (ca. 1100 nm) bands. EPR spectroscopic data reveal that, in the switched state, the interacting BIPY(?+) radical cations are in a fast exchange regime. In general, the findings lay the foundations for future investigations where this radical-radical recognition motif is harnessed in bistable redox-active MIMs in order to achieve close to homogeneous populations of co-conformations in both the ground and switched states.     

Dual-mode "co-conformational" switching in catenanes incorporating bipyridinium and dialkylammonium recognition sites

Three [2]catenanes and three [3]catenanes incorporating one or two pi-electron-rich macrocyclic polyethers and one pi-electron-deficient polycationic cyclophane have been synthesized in yields ranging from 4 to 38%. The pi-electron-rich macrocyclic components possess either two 1,4-dioxybenzene or two 1.5-dioxynaphthalene recognition sites. The pi-electron-deficient cyclophane components incorporate two bipyridinium and either one or two dialkylammonium recognition sites. The template-directed syntheses of these catenanes rely on i) pi...pi stacking interactions between the dioxyarene and bipyridinium recognition sites, ii) C-H...O hydrogen bonds between some of the bipyridinium hydrogen atoms and some of the polyether oxygen atoms, and iii) C-H...pi interactions between some of the dioxyarene hydrogen atoms and the aromatic spacers separating the bipyridinium units. The six catenanes were characterized by mass spectrometry and by both 1H and 13C NMR spectroscopy. The absorption spectra and the electrochemical properties of the catenanes have been investigated and compared with those exhibited by the component macrocycles and by related known catenanes. Broad and weak absorption bands in the visible region, originating from charge-transfer (CT) interactions between electron-donor and electron-acceptor units, have been observed. Such charge-transfer interactions are responsible for the quenching of the potentially fluorescent excited states of the aromatic units of the macrocyclic polyether components. The redox behavior of these novel compounds has been investigated and correlations among the observed redox potentials are illustrated and discussed. The catenanes undergo co-conformational switching upon one-electron reduction of the two bipyridinium units. One of them--in its reduced form--can be also switched by acid/base inputs and exhibits AND logic behavior. The co-conformational rearrangements induced by the redox and acid/base stimulations lend themselves to exploitation in the development of molecular-level machines and logic gates.     

Self-complementary

Three [3]catenanes with cavities large enough to accommodate aromatic guests have been designed and synthesized (yields = 5-20 %) by means of kinetically controlled self-assembly processes. The X-ray structural analysis of one of three [3]catenanes confirmed the presence of a rectangular cavity (dimensions = 7 x 11 A) lined by pi-electron-rich recognition sites and hydrogen-bond acceptor groups. In spite of their apparently ideal recognition features, none of these [3]catenanes bind guests incorporating a pi-electron-deficient bipyridinium unit. However, the template-directed syntheses of the [3]catenanes also produce, in yields of 2-23%, [2]catenanes incorporating a 1,5-dioxynaphtho[38]crown-10 interlocked with a bipyridinium-based tetracationic cyclophane. The X-ray structural analyses of two of these [2]catenanes revealed that a combination of [pi...pi] and [C-H...pi] interactions is responsible for the formation of supramolecular homodimers in the solid state. 1H NMR spectroscopic investigations of the four [2]catenanes demonstrated that supramolecular homodimers are also formed (Ka= 17-31M(-1), T= 185 K) in (CD3)2CO solutions. Dynamic 1H NMR spectroscopy revealed that the 1,5-dioxynaphtho[38]crown-10 and tetracationic cyclophane components in the four [2]catenanes and in the three [3]catenanes circumrotate (deltaGc(not equal to) = 9-14 kcal mol(-1)) through each other's cavity in (CD3)2CO. Similarly, the 1,5-dioxynaphthalene and the bipyridinium ring systems rotate (deltaGc(not equal to) =10-14 kcal mol(-1)) about their [O...O] and [N...N] axes, respectively, in solution.     

One-Step Synthesis of Cyclophanes as Crystalline Sponge and Their [2]Catenanes through SNAr Reactions

This work reports that cyclophanes and their [2]catenanes were synthesized by the S_NAr reactions of disubstituted adamantanes bearing halophenol units and 3,6-dichlorotetrazine in moderate yields. In the crystalline state, the cyclophanes had hexagonal structures with a cavity. The [2]catenanes were composed of two macrocycles that were singly interlocked and orthogonally arranged, indicating the construction from eight component molecules through eight C−O bonds in a one-step reaction in up to 33 % yield. The cyclophanes were assembled to afford a supramolecular organic framework in the solid state, which exhibited permanent intrinsic porosity and adsorption of leaf alcohol or aldehyde in a single-crystal to single-crystal fashion. The molecular structures of the liquid guests were determined by single-crystal X-ray analysis. The formation of catenanes and the use of cyclophane-based porous crystals in the crystalline sponge method may be largely ascribed to the solvophobic effects and the van der Waals interactions that originate in the aliphatic and bulky nature of the adamantane units.     

Surface chemistry of five-membered aromatic ring molecules containing two different heteroatoms on Si(111)-7 x 7

The surface chemistry of three representative aromatic molecules containing two different heteroatoms isoxazole, oxazole, and thiazole on Si(111)-7 x 7 was studied. These molecules exhibit different competition and selectivity for multiple reaction channels with this surface, determined by a combination of molecular electronic and structural factors. Isoxazole is chemically attached to Si(111)-7 x 7 through both dative-bond addition and [4 + 2]-like cycloaddition. Oxazole chemisorbs on Si(111)-7 x 7 through both dative-bond addition and [2 + 2]-like cycloaddition. The kinetically favored [2 + 2]-like cycloadduct at low temperature is thermally converted into the thermodynamically preferred [4 + 2]-like cycloadduct at a temperature higher than 300 K. Thiazole is chemically bound to this surface only through formation of a Si...N dative bond at low temperature. This dative-bonded molecule is thermally converted into a [4 + 2]-like cycloadduct. The reaction channels of the three five-membered aromatic molecules containing two different heteroatoms (isoxazole, oxazole, and thiazole) and of the aromatic molecules containing only one heteroatom (pyridine, pyrrole, furan, and thiophene) are compared and analyzed for a thorough understanding of the reaction mechanisms of various heterocyclic aromatic molecules on this surface. The intrinsic connection between surface reaction mechanism and molecular electronic structure is demonstrated. This includes the distribution of electron density on the molecular ring determined by the geometric arrangement of the heteroatoms, the electronegativity of the heteroatoms, and the electronic contribution of the heteroatoms to formation of aromatic pi conjugation, as well as the molecular polarity.     

The nature of the [TTF]˙+···[TTF]˙+ interactions in the [TTF]2(2+) dimers embedded in charged [3]catenanes: room-temperature multicenter long bonds

The properties of tetrathiafulvalene dimers ([TTF](2)(2+)) and the functionalized ring-shaped bispropargyl (BPP)-functionalized TTF dimers, [BPP-TTF](2)(2+), found at room temperature in charged [3]catenanes, were evaluated by M06L calculations. The results showed that their isolated [TTF](2)(2+) and [BPP-TTF](2)(2+) dimers are energetically unstable towards dissociation. When enclosed in the 4(+)-charged central cyclophane ring of charged [3]catenanes (CBPQT(4+)), [TTF](2)(2+) and [BPP-TTF](2)(2+) dimers are also energetically unstable with respect to leaving the CBPQT(4+) ring; since the barrier for the exiting process is only about 3 kcal mol(-1), that is, within the reach of thermal energies at room temperature (neutral [TTF](2)(0) dimers are stable within the CBPQT(4+) ring). However, the [BPP-TTF](2)(2+) dimers in charged [3]catenanes cannot exit, because this would imply breaking the covalent bonds of the BPP-TTF(+) macrocycle. Finally, it was shown that the [TTF](2)(2+), [BPP-TTF](2)(2+) dimers, and charged [3]catenanes are energetically stable in solution and in crystals of their salts, in the first case due to the interactions with the solvent, and in the second case mostly due to cation-anion interactions. In these environmental conditions at room temperature the TTF units of the [BPP-TTF](2)(2+) dimers make short contacts, thus allowing their SOMO orbitals to overlap: a room-temperature multicenter long bond is formed, similar to those previously found in other [TTF](2)(2+) salts and their solutions.