Amperometric Sensor for Hydrazine Determination Based on Mechanically Immobilized Nickel Hexacyanoferrate Modified Electrode

An amperometric sensor constructed by mechanical immobilization of nickel hexacyanoferrate onto the paraffin impregnated graphite electrode is reported. The modified electrode exhibits a reversible redox peak, which corresponds to surface-confined Fe(CN)^4- ₆/Fe(CN)^3- ₆reaction. Electrocatalytic oxidation of hydrazine is effective on the modified electrode at a significantly reduced overpotential and in a broader pH range. Linear response for hydrazine is in the range 4.0 × 10^–4to 4.0 × 10^–3M with a correlation coefficient of 0.9963. The detection limit is 9.6 × 10^–5M (S/N = 3). The stability and reproducibility of the modified electrode for the determination of hydrazine is evaluated. The proposed method has been applied for the determination of hydrazine in drinking water.     

Voltammetric evaluation of the electrode material on the oxidation of cyanide catalyzed by copper ions

The cyanide oxidation on vitreous carbon (VC), stainless steel 304 (SS 304) and titanium (Ti) was investigated through a voltammetric study of cyanide solutions also containing copper ions. Results showed that cyanide oxidation occurs by means of a catalytic mechanism involving adsorbed species as CN^–, Cu(CN)₄^3– or Cu(CN)₄^2– depending on the electrode material. It was observed that on VC, the adsorption of Cu(CN)₄^3– controlled the oxidation rate. Instead, for SS 304 and Ti, the adsorption of CN^– controlled the global process. However, in all cases, the adsorption of Cu(CN)₄^3– on the electrode surface was required for the catalytic oxidation of CN^–. Voltammetric experiments for solutions containing cyanide oxidation products, such as cyanogen (CN)₂ and cyanate (CNO^–), confirmed that the adsorbed species mentioned above controlled the catalytic oxidation of CN^– depending on the electrode material. A voltammetric identification of the oxidation products showed that cyanogen, (CN)₂ tended to adosorb on VC, while the formation of cyanate, CNO^– predominated on SS 304.     

Characterization and application of an electrode modified by mechanically immobilized copper hexacyanoferrate

A newly modified electrode was prepared by mechanical immobilization of copper hexacyanoferrate (CuHCF) on a graphite electrode. The modified electrode was characterized by cyclic voltammetric experiments. The effect of different background electrolytes, pHs and scan rates on the electrochemical behaviour of the electrode has been evaluated. In NH₄Cl two reversible redox peaks were observed. The first redox peak corresponding to Cu⁺/Cu²⁺ is observed only in this medium. The second redox peak corresponds to the Fe(CN)₆ ^4–/Fe(CN)₆ ^3– couple. Both anodic peaks were used for catalytic oxidation of ascorbic acid. As the anodic current for catalytic oxidation was proportional to the amount of ascorbic acid, an analytical method was developed for the determination of ascorbic acid in commercial samples. Received: 26 May 1998 / Revised: 15 March 1999 / Accepted: 20 March 1999     

Characterization and application of an electrode modified by mechanically immobilized copper hexacyanoferrate

A newly modified electrode was prepared by mechanical immobilization of copper hexacyanoferrate (CuHCF) on a graphite electrode. The modified electrode was characterized by cyclic voltammetric experiments. The effect of different background electrolytes, pHs and scan rates on the electrochemical behaviour of the electrode has been evaluated. In NH₄Cl two reversible redox peaks were observed. The first redox peak corresponding to Cu⁺/Cu²⁺ is observed only in this medium. The second redox peak corresponds to the Fe(CN)₆ ^4–/Fe(CN)₆ ^3– couple. Both anodic peaks were used for catalytic oxidation of ascorbic acid. As the anodic current for catalytic oxidation was proportional to the amount of ascorbic acid, an analytical method was developed for the determination of ascorbic acid in commercial samples.     

Voltammetric determination of itopride using carbon paste electrode modified with Gd doped TiO2 nanotubes

In the present work TiO₂ nanotubes (TNT) have been synthesized by alkaline hydrothermal transformation. Then they have been doped with Gd element. Characterizations of doped and undoped TNT have been done with TEM and SEM. The chemical composition was analyzed by EDX, Raman and FTIR spectroscopy. The crystal structure was characterized by XRD. Carbon paste electrode has been fabricated and mixed with Gd doped and undoped TNT to form a nanocomposite working electrode. Comparison of bare carbon paste electrode and Gd doped and undoped TNT carbon paste electrode for 1.0 ×10⁻³ M K₄ [Fe(CN)₆] voltammetric analysis; it was observed that Gd doped TNT modified electrode has advantage of high sensitivity. Gd doped TNT modified electrode has been used as working electrode for itopride assay in a pharmaceutical formulation. Cyclic voltammetry analysis showed high correlation coefficient of 0.9973 for itopride (0.04–0.2 mg/mL) with a limit of detection (LOD) and limit of quantitation values (LOQ) of 2.9 and 23.0 μg.mL⁻¹ respectively.     

Oxidation of palladium(II) by hexacyanoferrate(III) in aqueous ethanoic acid: a mechanistic study

The oxidation of Pd^II by Fe(CN) ₆ ^3– has been studied in 55% MeCO₂H–H₂O containing 4.0 mol dm^–3 HCl, the oxidation being made possible by altering redox potentials. The active species of Pd^II and Fe(CN) ₆ ^3– are PdCl ₃ ^– and H₂Fe(CN) ₆ ^– , respectively. A possible mechanism is proposed and verified, and the reaction constants involved have been evaluated.     

Metallic and non-metallic redox response of conducting polymers

The potentiometric response of electrodes coated with polypyrrole or poly(N-methylpyrrole) films with different doping anions was studied in solutions containing the redox couples: Fe(CN)₆^3−/4−, Ru(NH₃)₆^3+/2+ and Fe(Ill)/Fe(II). The stable potential measured with the electrodes was the potential of the redox couple. The response time was instant for polypyrrole doped with dodecylsulphate ions, PPy(DS) and slow for the polymers doped with mobile anions. On the basis of electrochemical measurements and chemical analysis by EDAX spectroscopy it was found that with the PPy(DS) electrode the potentiometric response was of the ‘metallic’ type, with no change in the oxidation state of the bulk polymer. With the other polymer systems studied reduction or oxidation of the polymer bulk took place when it was in contact with a redox couple in the solution.     

Elektrochemisches Verhalten von Redox-Systemen in Lösungsmittelgemischen, 2. Mitt.: Das System K4[Fe(CN)6]-K3[Fe(CN)6] in Fettsäure-Wasser-Gemischen

Zusammenfassung Es wurden die elektrochemischen Eigenschaften des Redox-Systems K₄[Fe(CN)₆]-K₃[Fe(CN)₆] in Ameisensäure-Wasser-, Essigsäure-Wasser-, Propionsäure-Wasser- und n-Buttersäure-Wasser-Gemischen untersucht. Die Veränderungen des Redoxpotentials, der Leitfähigkeit und der Dielektrizitäts-konstante wurden studiert.Es wurde bewiesen, daß die Potentialveränderung des Redox-Systems bei kleiner Säurekonzentration (n _s<0,6–0,7) vor allem durch die Wasserstoffionen-Konzentration der Lösung bestimmt wird. Mit der Zunahme der H⁺-Konzentration nimmt die Aktivität des [Fe(CN)₆]^4– in größerem Maße ab als die des [Fe(CN)₆]^3–.Bei großer Säurekonzentration beeinflußt dagegen hauptsächlich die Anionsolvatation durch das Lösungsmittelgemisch die Verschiebung des Redoxpotentials. Die Solvatation ruft eine Strukturveränderung hervor, wodurch die Elektronen-population der Lösungsmittelmoleküle in der Nähe der Cyanoferrat-Ionen abnimmt, die Elektronen-Acceptor-Wirkung des Lösungsmittels wächst. Dieser Prozeß bewirkt in bekannter Weise die Zunahme des Redoxpotentials.

---

The electrochemical behaviour of redox systems in mixed solvents, II.: TheK ₄[Fe(CN) ₆]-K ₃[Fe(CN) ₆] system in fatty acid-water mixtures

The electrochemical behaviour of the K₄[Fe(CN)₆]-K₃[Fe(CN)₆] system has been investigated in mixtures of water with formic, acetic, propionic and n-butyric acid, resp. The change of the redox potential, the conductivity and the dielectric constant has been studied. It has been proved that the change of the redox potential of the system at low acid concentration (n _s<0.6–0.7) is determined by the H⁺ concentration. Increasing the H⁺ concentration, the activity of the [Fe(CN)₆]^4– decreases in a higher extent than the activity of [Fe(CN)₆]^3–.On the other hand, at high acid concentration the shift in the redox potential is influenced first of all by the anion solvating effect of the solvent. The solvation causes such a change in the structure, that the electron population of the solvent molecules around the [Fe(CN)₆]^4– ions decreases, the acceptor strength of the solvent increases. It is well known that this process causes an increase in the redox potential.

---

---

Mit 7 Abbildungen     

A kinetic and mechanistic study of oxidation of arsenic(III) by hexacyanoferrate(III) in aqueous ethanoic acid

The kinetics of oxidation of As^IIIby Fe(CN)₆ ^3– has been studied spectrophotometrically in 60% AcOH–H₂O containing 4.0moldm^–3HCl. The oxidation is made possible by the difference in redox potentials. The reaction is first order each in [Fe(CN)₆ ^3–] and [As^III]. Amongst the initially added products, Fe(CN)₆ ^4– retards the reaction and As^Vdoes not. Increasing the acid concentration at constant chloride concentration accelerates the reaction. At constant acidity increasing chloride concentration increases the reaction rate, which reaches a maximum and then decreases. H₂Fe(CN)₆ ^–, is the active species of Fe(CN)₆ ^3–, while AsCl₅ ^2– in an ascending portion and AsCl₂ ⁺ in a descending portion are considered to be the active species of As^III. A suitable reaction mechanism is proposed and the reaction constants of the different steps involved have been evaluated.     

Electrochemical Behavior of K3[Fe(CN)6] on the Electrode Coated with Modified Multi‐Walled Carbon Nanotubes

The electrochemical behavior of K₃[Fe(CN)₆] was studied on an ITO electrode that was coated with β‐cyclodextrin (CD) modified multi‐walled carbon nanotubes (MWNTs) and with carboxyl modified multi‐walled carbon nanotubes (MWNT‐COOHs). MWNT‐COOHs showed an excellent electrocatalytic effect on the redox of K₃[Fe(CN)₆] while MWNT‐CDs had a subdued effect on the electrochemical response of K₃[Fe(CN)₆]. It is probably due to mismatching between K₃[Fe(CN)₆] and cyclodextrin, which hampers the contact of K₃[Fe(CN)₆] with carbon nanotubes. Moreover, the electrochemical behavior of K₃[Fe(CN)₆] on the MWNT‐COOHs coated ITO electrode at various scan rates also was measured. The results indicated that both potential difference between redox peaks and peak current of K₃[Fe(CN)₆] increased with increasing scan rate. A good linearity of peak current versus scan rate was observed.     

Electrochemical Characterization of the Self-Assembled Monolayer of 8-Mercaptoquinoline on Polycrystalline Gold Electrode

Self-assembled monolayer of 8-mercaptoquinoline (MQ) on the surface of gold from MQ dilute ethanolic solutions is investigated by electrochemical methods. Some aqueous redox probes, such as ferrocene carboxylic acid and Fe(CN)₆ ^4–/3– can sufficiently diffuse into the monolayer because significant diffusion-limited current peaks are observed when the redox reactions take place, showing that the monolayer is very loosely packed or dominated by defects. However, the study on the electron transfer of other aqueous probes, such as Cu²⁺ and Ru(NH₃)₆ ^3+/2+, confirm that the monolayer can block the electron transfer on the gold electrode surface rather effectively for its low ratio of pinhole defects. These studies show that the MQ monolayer on the electrode can provide an excellent barrier for penetration of some probes but cannot resist the penetration of other probes effectively. The unusual properties of the self-assembled monolayers are attributed to the entity of the very large heterocyclic moiety.     

Perchlorate-selective membrane electrode based on a new complex of uranil

A potentiometric ion-selective electrode based on new compound, as a carrier, has been successfully developed for detection of perchlorate anion in aqueous solution. Within the perchlorate ion concentration range 1.0×10^–6 to 1.0 mol L^–1 the electrode had a linear response with a Nernstian slope of 60.6±1.0 mV per decade . The limit of detection as determined from the intersection of the extrapolated linear segments of the calibration plot was 8.0×10^–7 mol L^–1. The proposed electrode has fairly a good discriminating ability towards ClO₄^– ion in comparison to other anions. The sensor has a response time of 10 s and can be used for at least 2 months without substantial divergence in potential. It was successfully applied to direct determination of perchlorate in urine and water.     

Potassium ion-selective electrode based on a cobalt(II)-hexacyanoferrate film-modified electrode

A potassium ion-selective electrode based on a cobalt(II)-hexacyanoferrate(III) (CHCF) film-modified glassy carbon electrode is proposed. The electroactive film is introduced onto the glassy carbon electrode surface by electrodeposition of cobalt, which forms a thin CHCF film on subsequent anodic scanning in KClHCl solution (pH 5.0–5.5) containing K₃Fe(CN)₆. The thickness of the film on the electrode surface can be controlled by changing the electrodeposition time and the concentrations of cobalt(II) and Fe(CN)^3?₆ ions. The modified electrode exhibits a linear response in the concentration range 1 × 10^?1 ?3 × 10^?5 M potassium ion activity, with a near-Nernstian slope (48–54 mV per decade) at 25 ± 1°C. The detection limit is 1 × 10^?5 M. The stability, response time and selectivity were investigated. The electrode exhibits good selectivity for potassium ion with the twelve cations investigated. The relative standard deviation is 1.5% (n=10). The effects of the thickness of the electroactive film and the pH of the solution on the electrode response were also investigated.     

Synthetic Semiconductor Diamond Electrodes: Electrochemical Characteristics of Homoepitaxial Boron-doped Films Grown at the (111), (110), and (100) Faces of Diamond Crystals

Electrode behavior of homoepitaxial (single-crystal) boron-doped diamond films deposited onto differently orientated faces of dielectric diamond single crystals is studied by the electrochemical impedance and potentiodynamic curve methods. It is shown that the acceptor concentration determined from the slope of Mott–Schottky plots decreases, in the epitaxial films grown under the same conditions, in the series: (111) > (110) > (100). This is explained by different intensity of boron incorporation, from gas phase, into differently orientated faces of the diamond crystals during their growth. The rate of electrode reactions in the Fe(CN)₆ ^3–/4– and Ru(NH₃)₆ ^2+/3+ redox systems decreases in the above series, which obeys the earlier found interrelationship between the electrochemical kinetics at diamond electrodes and their doping level.     

Azido-, Rhodano-, Cyano- und Fluorokomplexe des Fe(III)-Ions in Dimethylsulfoxid

Zusammenfassung Auf Grund spektrophotometrischer und konduktometrischer Messungen wurden folgende Koordinationsformen des Eisen(III)-ions mit Azid-, Rhodanid-, Cyanid- und Fluoridionen in Dimethylsulfoxid festgestellt: [Fe(N₃)₄]^–, [Fe(SCN)₆]^3–, [Fe(CN)₂]⁺, Fe(CN)₃, [Fe(CN)₄]^–, [FeF₂]⁺, [FeF₄]^–.

---

By means of spectrophotometric and conductometric measurements the following coordination forms of iron(III) with azide-, thiocyanate-, cyanide- and fluoride ions were found in dimethyl sulfoxide: [Fe(N₃)₄]^–, [Fe(SCN)₆]^3–, [Fe(CN)₂]⁺, Fe(CN)₃, [Fe(CN)₄]^–, [FeF₂]⁺, [FeF₄]^–.

---

---

Mit 4 Abbildungen     

Electrochemical study on screen-printed carbon electrodes with modification by iron nanoparticles in Fe(CN)<Subscript>6</Subscript><Superscript>4−/3−</Superscript> redox system

The remarkable enhancement of electron transfer on screen-printed carbon electrodes (SPCEs) with modification by iron nanoparticles (Fe_nano), coupled with Fe(CN)₆ ^4−/3− redox species, was characterized with an increase of electroactive area (A _ea) at electrode surface together with a decrease of heterogeneous electron transfer rate constant (k°) in the system. Hence, Fe_nano-Fe(CN)₆ ³⁻ SPCEs with deposition of glucose oxidase (GOD) demonstrated a higher sensitivity to various glucose concentrations than Fe(CN)₆ ³⁻/GOD-deposited SPCEs. In addition, an inhibited diffusion current from cyclic voltammograms was also observed with an increase in redox concentration and complicated the estimation of A _ea. Further analysis by the electrochemical impedance method, it was shown that this effect might be resulted from the electrode surface blocking by the products of activated complex decomposition.     

Octacyanomolybdate-doped-poly(4-vinylpyridine) ionomer film electrode for the electrocatalytic oxidation of <Emphasis Type="SmallCaps">l</Emphasis>-ascorbic acid

Poly(4-vinylpyridine) (PVP)-based anion exchange polymers are not studied as much as cation exchange polymers Nafion and Eastman Kodak AQ for electroanalytical applications. Similarly, octacyanomolybdate [Mo(CN)₈ ⁴⁻] has not been studied much as a redox mediator. This communication presents results from examinations of the behaviour of Mo(CN)₈ ⁴⁻-doped PVP ionomer film electrode to highlight the opportunities for realization of the application of this composite electrode for l-ascorbic acid (AH₂) estimation via electrocatalytic mediation in acidic medium. The modified electrodes were characterized by cyclic voltammetry and rotating disc electrode voltammetry. PVP coatings possess strong anion-binding capacity for Mo(CN)₈ ⁴⁻ mediator with an extraction coefficient of 990, and electrostatically cross-linked PVP films offer insignificant resistance to permeation of AH₂, facilitating a cross-exchange reaction between the substrate and the mediator in the entire film volume. They show effective electrocatalytic oxidation of AH₂, with the oxidation potential of AH₂ decreased by ∼200 mV in overpotential compared to that at bare electrode. Mo(CN)₈ ⁴⁻/PVP composite electrode does not respond to the more common interferents of l-ascorbic acid estimation even at high positive potentials. These and several other attractive potentialities of the modified electrode are demonstrated by direct determination of AH₂ in a commercial vitamin C tablet without any special treatment, with the value closely agreeing (±0.75%) with the reference method.     

Preparation, characterization, and electrocatalytic properties of hybrid coatings of hexacyanometalate-doped-cationic films

Electrochemically active hybrid coatings based on cationic films, didodecyldimethylammonium bromide (DDAB), and poly(diallyldimethylammonium chloride) (PDDAC) are prepared on electrode surface by cycling the film-covered electrode repetitively in a pH 6.5 solution containing Fe(CN)₆ ³⁻ and Ru(CN)₆ ⁴⁻ anions. Modified electrodes exhibited stable and reversible voltammetric responses corresponding to characteristics of Fe(CN)₆ ^3−/4− and Ru(CN)₆ ^4−/3− redox couples. The cyclic voltammetric features of hybrid coatings resemble that of electron transfer process of surface-confined redox couple. Electrochemical quartz crystal microbalance results show that more amounts of electroactive anionic complexes partitioned into DDAB coating than those doped into PDDAC coating from the same doping solution. Peak potentials of hybrid film-bound redox couples showed a negative shift compared to those at bare electrode and this shift was more pronounced in the case of DDAB. Finally, the advantages of hybrid coatings in electrocatalysis are demonstrated with sulfur oxoanions.     

Electrochemical behavior of a covalently modified glassy carbon electrode with aspartic acid and its use for voltammetric differentiation of dopamine and ascorbic acid

Aspartic acid was covalently grafted on to a glassy carbon electrode (GCE) by amine cation radical formation in the electrooxidation of the amino-containing compound. X-ray photoelectron spectroscopic (XPS) measurement and cyclic voltammetric experiments proved the aspartic acid was immobilized as a monolayer on the GCE. Electron transfer to Fe(CN)₆^4– in solution of different pH was studied by cyclic voltammetry. Changes in solution pH resulted in the variation of the charge state of the terminal group; surface pK_a values were estimated on the basis of these results. Because of electrostatic interactions between the negatively charged groups on the electrode surface and dopamine (DA) and ascorbic acid (AA), the modified electrode was used for electrochemical differentiation between DA and AA. The peak current for DA at the modified electrode was greatly enhanced and that for AA was significantly reduced, which enabled determination of DA in the presence of AA. The differential pulse voltammetric (DPV) peak current was linearly dependent on DA concentration over the range 1.8×10^–6–4.6×10^–4 mol L^–1 with slope (nA mol^–1 L) and intercept (nA) of 47.6 and 49.2, respectively. The detection limit (3) was 1.2×10^–6 mol L^–1. The high selectivity and sensitivity for dopamine was attributed to charge discrimination and analyte accumulation. The modified electrode has been used for determination of DA in samples, in the presence of AA, with satisfactory results.     

Electrochemical characterization of the redox couple of Fe(III)/Fe(II) mediated by grafted polymer reference electrode (GPRE)

A grafted polymer reference electrode (GPRE) (polystyrene grafted with acrylonitrile as a monomer using gamma irradiation) was fabricated as a reference electrode using cyclic voltammetry (CV). The redox process of K₃Fe(CN)₆ during CV was studied. It was found that the redox current peaks of Fe(II)/Fe(III) in 0.1 M of KCl as supporting electrolyte is given the same oxidation–reduction current as in the Ag/AgCl reference electrode, indicating a good result of GPRE and, hence, it can be used for voltammetric analysis technique. The physical properties of GPRE include good hardness, insoluble in non-aqueous electrolytes (except dimethyl formamide and chloroform), and good stability at different solvents. In addition, the sensitivity under conditions of CV is significantly dependent on the scan rate (SR) and variation in concentration. At different SRs, redox peaks of K₃Fe(CN)₆ were observed in a reversible process: Fe(II)/Fe(III). Interestingly, the redox reaction of Fe(II)/Fe(III) solution using GCE versus GPRE remains constant even after 15 cyclings. It is therefore evident that the GPRE possesses some degree of stability. Also, the new reference electrode GPRE has improved the properties of electroanalysis of CV on the working electrode GCE in reliability with the relative standard deviation.