DNA adsorption at liquid/solid interfaces

DNA adsorption on solid or liquid surfaces is a topic of broad fundamental and applied interest. Here, we study by X-ray reflectivity the adsorption of monodisperse double-stranded DNA molecules on a positively charged surface, obtained through chemical grafting of a homogeneous organic monomolecular layer of N-(2-aminoethyl) dodecanamide on an oxide-free monocrystalline Si(111) wafer. The adsorbed dsDNA is found to embed into the soft monolayer, which is deformed in the process. The surface coverage is very high, and this adsorbed layer is expected to display 2D nematic ordering.     

Forces between interfaces in concentrated nanoparticle suspensions and polyelectrolyte solutions

This article provides an overview of interactions between charged interfaces across concentrated suspensions of charged nanoparticles or solutions of polyelectrolytes. These systems bear many similarities. We distinguish the like-charged and oppositely charged situations. In the like-charged situation, a layered structure in the proximity of the interface is formed. This structure induces a strongly repulsive energy profile at shorter distances, which originates from a gap that is free of nanoparticles or polyelectrolytes. At larger distances, the profile becomes oscillatory. This energy profile can be quantified with a simple model, which distinguishes the near-field region and the far-field region. The parameters entering the model show characteristic scaling relations. In the oppositely charged situation, a saturated, tightly bound layer at the interface forms. This layer leads to a charge reversal of the interface and induces a similar layered structure as in the like-charged case.     

Probing the polymer anomalous dynamics at solid/liquid interfaces at the single-molecule level

A goal across multiple scientific fields (e.g. separations, polymer processing, and biomaterials) is to understand polymer dynamics at solid/liquid interfaces. In the last two decades, rapid developments in single-molecule techniques have revolutionized our ability to directly observe molecular behaviors with ultra-high spatial/temporal resolution and to decouple the elementary processes that were often veiled in ensemble experiments. This review provided an overview of principle and realization of two single-molecule fluorescence techniques that were often used to study the interfacial dynamics. In addition, this review updated recent progress in the discovery and understanding of dynamical anomalies of polymers at solid/liquid interfaces using these single-molecule techniques, emphasizing important elementary processes of diffusion, adsorption, and desorption.     

Fractal metal nanoparticle aggregates morphology formation mediated by polyelectrolyte/surfactant complex films at interfaces

In this work, the gold nanoparticle self-assembly behavior of mica-surface-confined polyelectrolyte/surfactant complex films was investigated. First, modified partially hydrated polyacrylamide (MHPAM)/hexadecyltrimethylammonium bromide (CTAB) complex films were deposited on the mica surface using Langmuir–Blodgett technique. Then, the preadsorbed MHPAM/CTAB complex film mica plate was dipped into the gold aqueous solution and the interesting fractal nanostructured gold network was formed. In addition, the effect of dipping time on gold nanoparticle self-assembly morphology was studied. The mechanism of formation process is briefly proposed.     

Globular proteins at solid/liquid interfaces

Seven years have passed since one of us (W.N.) published the last comprehensive review on the mechanism of globular protein adsorption to solid/water interfaces. Since that time, annual contributions to the field have steadily increased and substantial progress has been made in a number of important areas. This review takes a fresh look at the driving force for protein adsorption by combining recent advances with key results from the past. The analysis indicates that four effects, namely structural rearrangements in the protein molecule, dehydration of (parts of) the sorbent surface, redistribution of charged groups in the interfacial layer, and protein surface polarity usually make the primary contributions to the overall adsorption behavior.     

A lattice-gas model for specific ion adsorption at liquid | liquid interfaces

A lattice-gas model is used to investigate the specific adsorption of ions at the interface between two immiscible electrolyte solutions. From Monte Carlo simulations, the profiles of particle densities and of the electrostatic potential are obtained. Specific adsorption is shown to affect the potential distribution markedly. In some cases an overshoot of the potential can be observed, an effect that is well known from specific adsorption at metal electrodes. This redistribution of charge and potential can increase the interfacial capacity, shift the potential of zero charge, and influence the rate of electron-transfer reactions.     

Potential-modulation spectroscopy at solid/liquid and liquid/liquid interfaces.

Potential-modulation spectroelectrochemical methods at solid/liquid and liquid/liquid interfaces are reviewed. After a brief summary of the basic features and advantages of the methods, practical applications of potential-modulation spectroscopy are demonstrated using our recent studies of solid/liquid and liquid/liquid interfaces, including reflection measurements for a redox protein on a modified gold electrode and fluorescence measurements for various dyes at a polarized water/1,2-dichloroethane interface. For both interfaces, the use of linearly polarized incident light enabled an estimation of the molecular orientation. The use of a potential-modulated transmission-absorption measurement for an optically transparent electrode with immobilized metal nanoparticles is also described. The ability of potential-modulated fluorescence spectroscopy to clearly elucidate the charge transfer and adsorption mechanisms at liquid/liquid interfaces is highlighted.     

Investigations of polyelectrolyte adsorption at the solid/liquid interface by sum frequency spectroscopy: evidence for long-range macromolecular alignment at highly charged quartz/water interfaces

IR-visible sum frequency spectroscopy (SFS) was employed to investigate the molecular level details of the adsorption of the positively charged polyelectrolyte, polydiallyldimethylammonium chloride (PDDA), at the quartz/water interface. Below pH 9.0, signal from the interfacial water structure was visible, but none from the adsorbed polymer could be detected. This indicated that the PDDA was not well enough aligned at the interface under these conditions to elicit a sum frequency response. At more basic pH values (>or=9.6), however, adsorbed PDDA molecules became well-ordered as indicated by the presence of CH stretch peaks from methylene and methyl groups. The intensities of the CH stretch modes were independent of the adsorbed amount of PDDA at pH 12.3 but decreased as the pH of the bulk solution was lowered. The conditions for polymer alignment fell outside the parameters where layer-by-layer growth of oppositely charged polyelectrolytes was possible because the net charge on the surface under high pH conditions remained negative.     

Experimental aspects of polymer adsorption at solid/solution interfaces

Several recent review articles have been concerned with the topic of polymers at interfaces from the theoretical standpoint. This reflects the extensive effort made in this area over the last 10 – 15 years. However, new experimental techniques for studying polymers at interfaces have also begun to appear in recent years; so have better defined model systems. This article is therefore directed more to a survey of these experimental aspects of the subject. However, a short review of the current state of the theory is given first as background and to define concepts. In the following chapter, details of the modern experimental methods are given. The last chapter comprises an extensive comparative review of results obtained using these techniques with model systems, covering homopolymers, copolymers and polyelectrolytes.     

Structure of adsorption layers of ionic surfactants at the solid/liquid interface

A large number of experimental results of different surfactant adsorption systems (mainly on the silicas) obtained from both equilibrium and kinetic studies under different conditions are interpreted by a model of small individual surface aggregates. The adsorption model is contrasted with the influences of various factors, including electrostatic interaction, hydrophobic interaction, concentrations, types of coions, types of counterions, surfactant structure, alkyl chain length, types of head groups, neutral electrolytes, pH, adsorbent structure, porosity, surface charge density, and surface polarity.Dedicated to Frau Professor Dr. Elsa Ullmann on the occasion of her 80th birthday     

New description of heterogeneity effects in adsorption from multicomponent solutions and liquid adsorption chromatography

General equations describing adsorption from solutions on solids and liquid adsorption chromatography with mixed mobile phases are formulated in terms of the bulk and surface activity coefficeints. Definition of the surface activity coefficients is extended; they describe nonideality of surface solution due to difference in molecular interactions of the components as well as nonideality of this solution generated by the adsorbent heterogeneity. It is shown that the above general equations predict simpler expressions known already in the literature.     

Protein adsorption at liquid/liquid interface with low interfacial tension

Adsorption of proteins at the interface of two-liquid systems composed of aqueous ammonium sulfate solution and tert-butanol by phase separation was investigated by drop shape tensiometry. The change of interfacial tension with time and protein concentration as well as upon compression of the adsorbed layer were compared for bovine serum albumin, ovalbumin, β-lactoglobulin, lysozyme, trypsin and horse radish peroxidase. A correlation between the dilatational moduli of various protein films and the partitioning of proteins in the two-liquid system was found, which provides evidence to the role of emulsion stability in protein separation by three-phase partitioning.     

Small solid particles and liquid lenses at fluid/fluid interfaces

The behaviour of small solid particles and liquid droplets at fluid interfaces is of wide interest, in part because of the roles they play in the stability of foams and emulsions. Here we focus on solid particles at liquid interfaces, both singly and in highly structured monolayers. We briefly mention small oil lenses on water in connection with the determination of line tension, τ. Particles are surface-active in the sense that they often adhere quite strongly to liquid surfaces, although of course they are not usually amphiphilic. The three-phase contact line around a particle at an interface is associated with an excess free energy resulting in a tendency of the line to contract (positive τ, which is a 1D analogue of surface tension) or to expand (negative τ). Positive line tension acts so as to push the contact angle of a particle with the fluid interface further away from 90°, i.e. to force the particle towards the more “wetting” of the two bulk phases. It also leads to activation barriers to entry and departure of particles from an interface. The behaviour of particle monolayers at octane/water interfaces is also discussed . It is found that, for monodisperse spherical polystyrene particles containing ionisable sulphate groups at the surface, highly ordered monolayers are formed. This appears to result from very long range electrostatic repulsion mediated through the oil phase. Surface pressure–surface area isotherms are discussed for particle monolayers and it is shown, using light microscopy, that at monolayer “collapse” particles are not expelled from the monolayers but rather the monolayer folds, remaining intact. This has an important bearing on methods, involving the use of the Langmuir trough, for the experimental determination of contact angles and line tensions in particulate systems. Received: 18 July 1999/Accepted: 30 August 1999     

Experimental characterization of adsorbed macromolecule layers at solid/liquid interfaces

A survey will be given on the experimental methods to characterize the structure of adsorbed polymer layers at solid/liquid interfaces. Characterization parameters accessible by experimental methods are: adsorption isotherm mostly determined from the difference in the solution concentration; fraction of adhered segments, obtained from IR-, NMR- ESR-spectrometry and from microcalorimetry; layer thicknesses of different type from ellipsometry, diffusion, sedimentation, viscosimetry, electrophoresis, force-distance measurements between contacting layers and from segment density profiles obtained by SANS; adsorption enthalpies from microcalorimetry and from displacer-technique. Own experimental data of the adsorption of olystyrene, poly(ethylene oxide)s (PHD), poly(N-vinyl-2-pyrrolidone), poly-(butyl methacrylate)s, poly(vinyl alcohol)s as well as copolymers from ethylene oxide and propylene oxide on interfaces of colloidal silica- and latexparticles and partially on flat chromium-, platinum-and gold surfaces from organic and aqueous solutions and characteristic results from the literature will be compared and discussed in order to get insight into the conformation of the adsorbed macromolecules.     

Multilayer adsorption with variable thickness at solid-liquid interfaces

 The multilayer adsorption on the solid/liquid interface in binary mixtures was studied by adsorption space filling with constant and variable layer thickness. Adsorption from benzene/n-heptane mixtures was examined on hydrophilic and hydro-phobic surfaces. The free enthalpy of adsorption, Δ₂₁ G=f (x ₁), was calculated from the adsorption excess isotherm by integration of the Gibbs equation. Supposing that the free enthalpy is mainly due to adsorption in the first layer, the composition of this layer can be calculated from the Δ₂₁ G=f (x ₁) function. It was established that the adsorption layer thickness in benzene/heptane mixtures increases significantly with increasing benzene content. This statement was supported by X-ray diffraction on hydrophobic clay minerals. Received: 2 April 1997 Accepted: 10 June 1997     

Rod-like polyelectrolyte adsorption onto charged surfaces in monovalent and divalent salt solutions

We analyze the adsorption of strongly charged polyelectrolytes onto weakly charged surfaces in divalent salt solutions. We include short-range attractions between the monomers and the surface and between condensed ions and monomers, as well correlations among the condensed ions. Our results are compared with the adsorption in monovalent salt solutions. Different surface charge densities (σ), and divalent (m) and monovalent (s) salt concentrations are considered. When the Wigner-Seitz cells diameter (2R) is larger than the length of the rod, the maximum amount of adsorption scales like n_max ∼ σ^4/3 in both monovalent and divalent solutions. For homogeneously charged surfaces, the maximum adsorption occurs at s* ∼ σ² when s* > ϕ, where ϕ is the monomer concentration, the counterpart for divalent salt solution, m* roughly scales as σ^2.2 when m* > ϕ. The effective surface charge density has a maximum absolute value at m′ < m*. A discrete surface charge distribution and short-range attractions between monomers and surface charge groups can greatly enhance surface charge inversion especially for high salt concentration. The critical salt concentration for adsorption in divalent salt solution roughly scales as m_c ∼ bσ^1.9, where b is the distance between two neighboring charged monomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3642–3653, 2004     

Reduction of friction at oxide interfaces upon polymer adsorption from aqueous solutions

Reduction of the interfacial friction for the contact of a silicon oxide surface with sodium borosilicate in aqueous solutions has been accomplished through the adsorption of poly(L-lysine)-graft-poly(ethylene glycol) on one or both surfaces. Spontaneous polymer adsorption has been achieved via the electrostatic attraction of the cationic polylysine polymer backbone and a net negative surface charge, present for a specific range of solution pH values. Interfacial friction has been measured in aqueous solution, in the absence of wear, and on a microscopic scale with atomic force microscopy. The successful investigation of the polymer-coated interfaces has been aided by the use of sodium borosilicate microspheres (5.1 microm diameter) as the contacting probe tip. Measurements of interfacial friction as a function of applied load reveal a significant reduction in friction upon the adsorption of the polymer, as well as sensitivity to the coated nature of the interface (single-sided versus two-sided) and the composition of the adsorbed polymer. These measurements demonstrate the fundamental opportunity for lubrication in aqueous environments through the selective adsorption of polymer coatings.     

Influence of polyelectrolyte multilayer adsorption on the temperature sensitivity of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) (PNiPAM) microgels

The electrophoretic mobility and temperature-dependent particle size of poly(N-isopropylacrylamide) (PNiPAM) microgels after alternating adsorption of poly(diallyldimethylammonium chloride) (PDADMAC) and poly(sodium 4-styrenesulfonate) (PSS) have been determined. First a PNiPAM-co-acrylic acid (AAc) shell was added to the PNiPAM microgel, then PDADMAC and PSS were adsorbed alternately. The studies of the electrophoretic mobility revealed charge reversal when a polyelectrolyte (PE) layer was adsorbed. Particle size measurements revealed a strong influence of polyelectrolyte adsorption on the temperature-dependent particle swelling. The strong influence of the adsorbed polyelectrolyte on the particle size is in contrast to polyelectrolyte multilayer adsorption on rigid particles.     

Competitive adsorption from multicomponent non-electrolytic liquid mixtures on heterogeneous solid surfaces

Summary A simple model for competitive adsorption from multicomponent non-electrolytic liquid mixtures on energetically heterogeneous solid surfaces is discussed in terms of statistical thermodynamics. Integral equations are derived for the fundamental thermodynamic quantities that characterize competitive adsorption at the liquid-solid interface. Extensive model studies are presented in order to illustrate the influence of adsorbent heterogeneity on the behaviour of these thermodynamic quantities.on leave from Faculty of Chemistry, M. Curie-Sklodowska University, PL-20031 Lublin, Poland