NONBRIDGED HALF-TITANOCENES CONTAINING ANIONIC ANCILLARY DONOR LIGANDS: PROMISING NEW CATALYSTS FOR PRECISE SYNTHESIS OF CYCLIC OLEFIN COPOLYMERS (COCs)

Precise,efficient copolymerizations of ethylene with cyclic olefins[norbornene(NBE),cyclopentene(CPE)]using nonbridged half-titanocenes of type,Cp'TiCl_2(L)(Cp'=cyclopentadienyl group,L=aryloxo,ketimide)-MAO catalyst systems have been summarized.CpTiCl_2(N=C'Bu_2)exhibited both remarkable catalytic activity and efficient NBE incorporation for ethylene/NBE copolymerization:the NBE incorporation by Cp'TiCl_2(X)(X=N=C'Bu_2,O-2,6-'Pr_2C_6H_3; Cp'=Cp,C_5Me_5,indenyl)was related to the calculated coordination ...     

Living copolymerization of ethylene with styrene catalyzed by (cyclopentadienyl)(ketimide)titanium(IV) complex--MAO catalyst system

The copolymerization of ethylene with styrene by Cp*TiCl2(N=CtBu2) (Cp* = C5Me5) took place in a living manner in the presence of methylaluminoxane (MAO) cocatalyst, although the homopolymerization of neither ethylene nor styrene proceeded in a living manner. Both the cyclopentadienyl fragment (Cp') and the anionic donor ligand (X) in Cp'TiCl2(X) directly affect the copolymerization behavior, the catalytic activities, as well as the styrene incorporation; only the above set showed a living copolymerization. No styrene repeating units were observed in the resultant poly(ethylene-co-styrene)s, suggesting that a certain degree of the styrene insertion inhibited the chain transfer in this catalysis.     

Copolymerization of ethylene with cyclohexene (CHE) catalyzed by nonbridged half-titanocenes containing aryloxo ligand: notable effect of both cyclopentadienyl and anionic donor ligand for efficient CHE incorporation

Cyclohexene (CHE) has been incorporated into the polymer chain in ethylene/CHE copolymerization by nonbridged half-titanocenes containing aryloxo ligands of the type, Cp'TiCl2(O-2,6-iPr2C6H3), in the presence of methylaluminoxane (MAO) cocatalyst. The effect of the substituent in the cyclopentadienyl fragment was found to be very important for CHE incorporation; both the tert-BuCp (3) and 1,2,4-Me3Cp analogues (4) showed efficient CHE incorporation, whereas a negligible amount of CHE incorporation was observed by both the indenyl (1) and the Cp* analogue (2) under the same conditions. Cp-ketimide analogue, CpTiCl2(N=CtBu2) (5), zirconocene-like Cp2ZrCl2 (6), and linked half-titanocene-like [Me2Si(C5Me4)(NtBu)]TiCl2 (7) did not show any CHE incorporation under the same conditions; unique characteristics for using this type of catalyst precursor for the present copolymerization have thus been emphasized.     

Pivaloylmetals (tBu-COM: M = Li, MgX, K) as equilibrium components

Short-lived pivaloylmetals, (H(3)C)(3)C-COM, were established as the reactive intermediates arising through thermal heterolytic expulsion of O=CtBu(2) from the overcrowded metal alkoxides tBuC(=O)-C(-OM)tBu(2) (M = MgX, Li, K). In all three cases, this fission step is counteracted by a faster return process, as shown through the trapping of tBu-COM by O=C(tBu)-C(CD(3))(3) with formation of the deuterated starting alkoxides. If generated in the absence of trapping agents, all three tBu-COM species "dimerize" to give the enediolates MO-C(tBu)=C(tBu)-OM along with O=CtBu(2) (2?equiv). A common-component rate depression by surplus O=CtBu(2) proves the existence of some free tBu-COM (separated from O=CtBu(2)); but companion intermediates with the traits of an undissociated complex such as tBu-COM & O=CtBu(2) had to be postulated. The slow fission step generating tBu-COMgX in THF levels the overall rates of dimerization, ketone addition, and deuterium incorporation. Formed by much faster fission steps, both tBu-COLi and tBu-COK add very rapidly to ketones and dimerize somewhat slower (but still fairly fast, as shown through trapping of the emerging O=CtBu(2) by H(3)CLi or PhCH(2)K, respectively). At first sight surprisingly, the rapid fission, return, and dimerization steps combine to very slow overall decay rates of the precursor Li and K alkoxides in the absence of trapping agents: A detailed study revealed that the fast fission step, generating tBu-COLi in THF, is followed by a kinetic partitioning that is heavily biased toward return and against the product-forming dimerization. Both tBu-COLi and tBu-COK form tBu-CH=O with HN(SiMe(3))(3), but only tBu-COK is basic enough for being protonated by the precursor acyloin tBuC(=O)-C(-OH)tBu(2) .     

Ancillary ligands and spectator cations as controlling factors in the construction of coordination and hydrogen-bonded networks with the tert-Bu-C triple bond C superset Ag(n) (n=4, 5) supramolecular synthon

Supramolecular networks constructed with the tBu--C[triple bond]C superset Ag(n) (n=4 or 5) metal-ligand synthon and trifluoroacetate have been transformed through the introduction of ancillary terminal nitrile ligands, from acetonitrile through propionitrile to tert-butyronitrile, giving rise to a 2D coordination network in AgC[triple chemical bond]CtBu3 AgCF(3)CO(2)H(2)O (1), a 2D hydrogen-bonded network in AgC[triple chemical bond]CtBu5 AgCF(3)CO(2)4 CH(3)CNH(2)O (2), a 2D hybrid coordination/hydrogen-bonded network in AgC[triple chemical bond]CtBu3 AgCF(3)CO(2)CH(3)CH(2)CN2 H(2)O (3), and another 2D coordination network in AgC[triple chemical bond]CtBu4 AgCF(3)CO(2) (CH(3))(3)CCN2 H(2)O (4). Concomitantly, the linkage modes between adjacent ethynide-bound Ag(n) aggregates in these compounds are also changed. A layer-type hydrogen-bonded host lattice in isostructural AgC[triple chemical bond]CtBu4 AgCF(3)CO(2)(R(4)N)(CF(3)CO(2)) 2 H(2)O (R(4)=BnMe(3), 5; R(4)=Et(4), 6; R(4)=nPr(4), 7) is obtained by introducing quaternary ammonium cations as guest templates, which occupy the interstices and thereby mediate the interlayer separation. Use of the bulky nBu(4)N(+) cation leads to disruption of the host network in AgC[triple bond]CtBu4 AgCF(3)CO(2)3[(nBu(4)N)(CF(3)CO(2))]H(2)O (8) with generation of a discrete dense nido-Ag(5) cluster.     

Neutral and ionic aluminum,gallium, and indium compounds carrying two or three terminal ethynyl groups

The syntheses of the ionic compounds [Li(+).2 dioxane (2,6-iPr(2)C(6)H(3)N(SiMe(3))Al(C triplebond CSiMe(3))(3))(-)].0.75 dioxane (1), [(Li(+))(2).(dioxane)(7)](0.5) [2,6-iPr(2)C(6)H(3)N(SiMe(3))Ga(C triplebond CSiMe(3))(3)(-)].1.5 dioxane (2), and [(Li(+))(2).(dioxane)(7)](0.5) [2,6-iPr(2)C(6)H(3)N(SiMe(3))In(C triplebond CSiMe(3))(3)(-)].1.5 dioxane (3) by the reaction of the corresponding organo metal chloride with LiC triplebond CSiMe(3) are reported. The neutral ethynyl compounds Br-Al(C triplebond CtBu)(2).2 THF (4), Cl-Ga(C triplebond CtBu)(2).THF (5), Cl-In(C triplebond CtBu)(2).2 THF (6), Al(C triplebond CtBu)(3).C[N(Me)CMe](2) (7), Ga(C triplebond CtBu)(3).dioxane (8), and In(C triplebond CtBu)(3).NEt(3) (9) have been obtained in good yields from the reaction of AlBr(3), GaCl(3), and InCl(3) with LiC triplebond CtBu in the presence of a Lewis base. Compound 7 is the first heterocyclic carbene substituted ethynyl derivative. Aluminum and gallium compounds with three terminal ethynyl groups Al(C triplebond CPh)(3).NMe(3) (10) and Ga(C triplebond CPh)(3).NMe(3) (11) have been prepared by the reaction of AlH(3).NMe(3) or GaH(3).NMe(3) with three equivalents of phenylethyne. All the above-mentioned compounds have been structurally studied. In compound 1 the lithium ion is coordinated to the three terminal ethynyl groups, whereas in compounds 2 and 3 the lithium is coordinated to the solvent (dioxane). Compound 8 crystallizes as a coordination polymer with dioxane molecules bridging the individual gallium units.     

Efficient ethylene/norbornene copolymerization by half‐titanocenes containing imidazolin‐2‐iminato ligands and MAO catalyst systems

Ethylene copolymerizations with norbornene (NBE) using half‐titanocenes containing imidazolin‐2‐iminato ligands, Cp′TiCl₂[1,3‐R₂(CHN)₂C?N] [Cp′ = Cp ( 1 ), ^tBuC₅H₄ ( 2 ); R = ^tBu ( a ), 2,6‐ⁱPr₂C₆H₃ ( b )], have been explored in the presence of methylaluminoxane (MAO) cocatalyst. Complex 1a exhibited remarkable catalytic activity with better NBE incorporation, affording high‐molecular‐weight copolymers with uniform molecular weight distributions, whereas the tert‐BuC₅H₄ analog ( 2a ) showed low activity, and the resultant polymer prepared by the Cp‐2,6‐diisopropylphenyl analog ( 1b ) possessed broad molecular weight distribution. The microstructure analysis of the poly(ethylene‐co‐NBE)s prepared by 1a suggests the formation of random copolymers including two and three NBE repeating units. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2575–2580     

Cations M2(O2CtBu)4+, where M = Mo and W, and MoW(O2CtBu)4+. Theoretical, spectroscopic, and structural investigations

With the aid of density function theory, the molecular and electronic structures of the molecules Mo2(O2CMe)4, MoW(O2CMe)4, and W2(O2CMe)4 and their single-electron oxidized radical cations have been determined; this includes calculated observables such as v(MM) and the delta --> delta* electronic transition energies. The calculated properties are compared with those for the corresponding pivalates, M2(O2CtBu)4 (M = Mo or W) and MoW(O2CtBu)4 and their radical cations prepared in situ by oxidation with Cp2FePF6. The EPR spectra of the radical cations are also reported. The EPR spectrum of the MoW(O2CtBu)4+ cation reveals that the unpaired electron is in a polarized MM delta orbital having 70% Mo and 30% W character. The MM stretching frequencies show good correlation with the MM bond lengths obtained from single-crystal X-ray diffraction studies of MoW(O2CtBu)4, W2(O2CtBu)4, and W2(O2CtBu)4+PF6- compounds, along with previously reported structures. These data provide benchmark parameters for valence trapped dicarboxylate bridged radical cations of the type [(tBuCO2)3M2]2(micro-O2C-X-CO2)+ (X = conjugated spacer).     

Benzonitrile extrusion from molybdenum(IV) ketimide complexes obtained via radical C-E (E = O, S, Se) bond formation: toward a new nitrogen atom transfer reaction

Beta-elimination is explored as a possible means of nitrogen-atom transfer into organic molecules. Molybdenum(IV) ketimide complexes of formula (Ar[t-Bu]N)3Mo(N=C(X)Ph), where Ar = 3,5-Me2C6H3 and X = SC6F5, SeC6F5, or O2CPh, are formally derived from addition of the carbene fragment [:C(X)Ph] to the terminal nitrido molybdenum(VI) complex (Ar[t-Bu]N)3Mo identical with N in which the nitrido nitrogen atom is installed by scission of molecular nitrogen. Herein the pivotal (Ar[t-Bu]N)3Mo(N=C(X)Ph) complexes are obtained through independent synthesis, and their propensity to undergo beta-X elimination, i.e., conversion to (Ar[t-Bu]N)3MoX + PhC identical with N, is investigated. Radical C-X bond formation reactions ensue when benzonitrile is complexed to the three-coordinate molybdenum(III) complex (Ar[t-Bu]N)3Mo and then treated with 0.5 equiv of X2, leading to facile assembly of the key (Ar[t-Bu]N)3Mo(N=C(X)Ph) molecules. Treated herein are synthetic, structural, thermochemical, and kinetic aspects of (i) the radical C-X bond formation and (ii) the ensuing beta-X elimination processes. Beta-X elimination is found to be especially facile for X = O2CPh, and the reaction represents an attractive component of an overall synthetic cycle for incorporation of dinitrogen-derived nitrogen atoms into organic nitrile (R-C identical with N) molecules.     

Appreciable norbornene incorporation in the copolymerization of ethylene/norbornene using titanium catalysts containing trianionic N[CH2CH(Ph)O]33− ligands

The newly synthesized 1‐TiCl (C₃ symmetric) and 2‐TiCl (C_s symmetric) precatalysts in combination with MAO polymerized ethylene, cyclic olefins, and copolymerized ethylene/norbornene in good yields. The catalyst with C₃ symmetry exhibits moderate catalytic activity and efficient norbornene incorporation for E/NBE copolymerization in the presence of MAO [activity = 360 kg polymer/(mol Ti h), ethylene 1 atm, NBE 5 mmol/mL, 10 min], affording poly(ethylene‐co‐NBE)s with high norbornene contents (42.0%) and the C_s symmetric catalyst showed an activity of 420 kg polymer/(mol Ti h), ethylene 1 atm, NBE 5 mmol/mL affording poly(ethylene‐co‐NBE)s with 33.0% norbornene content. The effect of monomer concentration at ambient temperature and constant Al/Ti ratio for the homo and copolymerization was studied in a detailed manner. We found that apart from the electronic environment around the metal center the steric environment provided by the symmetry of the catalyst systems has a considerable influence on the percentage of norbornene content of the copolymer obtained. We also found that with a given catalyst a variable clearly influencing the copolymer microstructure, hence also the copolymer properties, is the monomer concentration at a given feed ratio. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 444–452, 2008     

Intermolecular recognition and crystal packing in molybdenum and tungsten coordination polymers as deduced from powder X-ray diffraction data

The molecular conformations and packing of [(tBuCO2)3M2(mu-X)M2(O2CtBu)3], where M = Mo and W, and X = oxalate and perfluoroterephthalate, determined in the solid-state from powder X-ray diffraction analysis, reveal one-dimensional coordination polymers involving pivalate-oxygen to metal interactions (X = perfluoroterephthalate), and oxalate--as well as pivalate-oxygen to metal bonds (X = oxalate), and allows explanation of the unusual state-dependent chromic properties of these compounds.     

5-Hydroxymethyl-2'-deoxyuridine. Cytotoxicity and DNA incorporation studied by using a novel [2-14C]-derivative with normal and leukemic human hematopoietic cells

5-Hydroxymethyl-2'-deoxyuridine is a biologically active thymidine analogue. This investigation was aimed at characterizing the cytotoxicity of 5-hydroxymethyl-2'-deoxyuridine and its incorporation into DNA. Fifty percent inhibition of cellular proliferation, assessed by incorporation of [U-14C]-L-leucine in vitro, was caused by 1.7-5.8 X 10(-5) incorporation of [U-14C]-L-leucine in vitro, was caused by 1.7-5.8 X 10(-5) M 5-hydroxymethyl-2'-deoxyuridine in seven human leukemia cell lines. Higher concentrations of 5-hydroxymethyl-2'-deoxyuridine, i.e. 6-8 X 10(-5) M, were required for a comparable inhibition in human PHA-stimulated peripheral blood lymphocytes. A new synthesis procedure for [2-14C]5-hydroxymethyl-2'-deoxyuridine was developed. The net incorporation of [2-14C]5-hydroxymethyl-2'-deoxyuridine into DNA of hematopoietic cells was low. The possibility of a repair mechanism for 5-hydroxymethyluracil bound to DNA is discussed.     

Copper(I) alkynyl clusters, [Cu(x+y)(hfac)(x)(C[triple chemical bond]CR)(y)], with Cu(10)-Cu(12) cores

The facile syntheses and the structures of five new Cu(I) alkynyl clusters, [Cu(12)(hfac)(8)(C[triple chemical bond]CnPr)(4)(thf)(6)]xTHF (1), [Cu(12)(hfac)(8)(C[triple chemical bond]CtBu)(4)] (2), [Cu(12)(hfac)(8)(C[triple chemical bond]CSiMe(3))(4)] (3), [Cu(10)(hfac)(6)(C[triple chemical bond]CtBu)(4)(diethyl ether)]/[Cu(10)(hfac)(6)(C[triple chemical bond]CtBu)(3)(C[triple chemical bond]CnPr)(diethyl ether)] (4) and [Cu(10)(hfac)(6)(C[triple chemical bond]CtBu)(4)(diethyl ether)] (5) are reported, in which hfacH=1,1,1,5,5,5-hexafluoropentan-2,4-dione. The first independent molecule found in the crystals of 4 (4 a) proved to be chemically identical to 5. The Cu(10) and Cu(12) cores in these clusters are based on a central "square" Cu(4)C(4) unit. Whilst the connectivities of the Cu(10) or Cu(12) units remain identical the geometries vary considerably and depend on the bulk of the alkynyl group, weak coordination of ether molecules to copper atoms in the core and CuO intramolecular contacts formed between Cu-hfac units on the periphery of the cluster. Similar intermolecular contacts and interlocking of Cu-hfac units are formed in the simple model complex [Cu(2)(hfac)(2)(HC[triple chemical bond]CtBu)] (6). When linear alkynes, C(n)H(2n+1)C[triple chemical bond]CH, are used in the synthesis and non-coordinating solvents are used in the workup, further association of the Cu(4)C(4) cores occurs and clusters with more than eighteen copper atoms are isolated.     

Vinyl homo/copolymerization of norbornene and ethylene using sterically enhanced 1,2‐bis(arylimino)acenaphthene–palladium precatalysts

A family of unsymmetrical 1,2‐bis(imino)acenaphthene‐palladium methyl chloride complexes [1‐[2,6‐{(C₆H₅)₂CH}₂‐ 4‐{C(CH₃)₃}‐C₆H₂N]‐2‐(ArN)C₂C₁₀H₆]PdMeCl (Ar = 2,6‐Me₂Ph Pd1 , 2,6‐Et₂Ph Pd2 , 2,6‐ⁱPr₂Ph Pd3 , 2,4,6‐Me₃Ph Pd4 , 2,6‐Et₂‐4‐MePh Pd5 ) have been prepared and fully characterized by ¹H/¹³C NMR, FTIR spectroscopies, and elemental analysis. X‐ray diffraction analysis of Pd2 complex revealed a square planar geometry. Upon activation with methylaluminoxane, all the palladium complexes displayed high activities for norbornene (NBE) homo‐polymerization producing insoluble polymer. For the copolymerization of NBE with ethylene, Pd4 complex exhibited good activities with high incorporation of ethylene (up to 59.2–77.4%) and the resultant copolymer showed high molecular weights as maximum as 150.5 kg mol⁻¹. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 922–930     

A class of luminescent cyclometalated alkynylgold(III) complexes: synthesis, characterization, and electrochemical, photophysical, and computational studies of [Au(C=N=C)(C triple bond C-R)] (C=N=C = kappa(3)C,N,C bis-cyclometalated 2,6-diphenylpyridyl)

A new class of luminescent cyclometalated alkynylgold(III) complexes, [Au(RC=N(R')=CR)(CCR' ')], i.e., [Au(C=N=C)(C triple bond CR')] (HC=N=CH = 2,6-diphenylpyridine) R' ' = C6H5 1, C6H4-Cl-p 2, C6H4-NO2-p 3, C6H4-OCH3-p 4, C6H4-NH2-p 5, C6H4-C6H13-p 6, C6H13 7, [Au(tBuC=N=CtBu)(C triple bond CC6H5)] 8 (HtBuC=N=CtBuH = 2,6-bis(4-tert-butylphenyl)pyridine), and [Au(C=NTol=C)(CCC6H4-C6H13-p)] 9 (HC=NTol=CH = 2,6-diphenyl-4-p-tolylpyridine), have been synthesized and characterized. The X-ray crystal structures of most of the complexes have also been determined. Electrochemical studies show that, in general, the first oxidation wave is an alkynyl ligand-centered oxidation, while the first reduction couple is ascribed to a ligand-centered reduction of the cyclometalated ligand with the exception of 3 in which the first reduction couple is assigned as an alkynyl ligand-centered reduction. Their electronic absorption and luminescence behaviors have also been investigated. In dichloromethane solution at room temperature, the low-energy absorption bands are assigned as the pi-pi* intraligand (IL) transition of the cyclometalated RC=N(R')=CR ligand with some mixing of a [pi(C triple bond CR') --> pi*(RC=N(R')=CR)] ligand-to-ligand charge transfer (LLCT) character. The low-energy emission bands of all the complexes, with the exception of 5, are ascribed to origins mainly derived from the pi-pi* IL transition of the cyclometalated RC=N(R')=CR ligand. In the case of 5 that contains an electron-rich amino substituent on the alkynyl ligand, the low-energy emission band was found to show an obvious shift to the red. A change in the origin of emission is evident, and the emission of 5 is tentatively ascribed to a [pi(CCC6H4NH2) --> pi*(C=N=C)] LLCT excited-state origin. DFT and TDDFT computational studies have been performed to verify and elucidate the results of the electrochemical and photophysical studies.     

Copolymerization of norbornene and 5‐norbornene‐2‐yl acetate using novel bis(β‐ketonaphthylamino)Ni(II)/B(C6F5)3/AlEt3 catalytic system

Vinyl‐type copolymerization of norbornene (NBE) and 5‐NBE‐2‐yl‐acetate (NBE‐OCOMe) in toluene were investigated using a novel homogeneous catalyst system based on bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃/AlEt₃. The copolymerization behavior as well as the copolymerization conditions, such as the levels of B(C₆F₅)₃ and AlEt₃, temperature, and monomer feed ratios, which influence on the copolymerization were examined. Without combination of AlEt₃, the catalytic bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃ exhibited very high catalyst activity for polymerization of NBE. Combination of AlEt₃ in catalyst system resulted in low conversion for polymerization of NBE. For copolymerization of NBE and NBE‐OCOMe, involvement of AlEt₃ in catalyst is necessary. Slight addition of NBE‐OCOMe in copolymerization of NBE and NBE‐OCOMe gives rise to significant increase of catalyst activity for catalytic system bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃/AlEt₃. Nevertheless, excess increase of the NBE‐OCOMe content in the comonomer feed ratios results in decrease of conversion as well as activity of catalyst. The achieved copolymers were confirmed to be vinyl‐addition copolymers through the analysis of FTIR, ¹H NMR, and ¹³C NMR spectra. ¹³C NMR studies further revealed the composition of the copolymer and the incorporation rate was 7.6–54.1 mol % ester units at a content of 30–90 mol % of the NBE‐OCOMe in the monomer feeds ratios. TGA analysis results showed that the copolymer exhibited good thermal stability (T_d > 410 °C) and failed to observe the glass transitions temperature over 300 °C. The copolymers are confirmed to be noncrystalline by WAXD analysis results and show good solubility in common organic solvents. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3990–4000, 2009     

Selective incorporation of functional dicarboxylates into zinc metal-organic frameworks

Zinc(II) nitrate reacts with different ratios of 1,4-benzenedicarboxylic acid (H(2)bdc) and 2-halo-1,4-benzenedicarboxylic acid (H(2)bdc-X, X = Br or I) to give [Zn(4)O(bdc)(3-x)(bdc-X)(x)], in which preferential incorporation of bdc is observed. The selective incorporation is related to crystal growth rates, and the proportion of incorporated bdc-X rises with increasing reaction time.     

Ring-opening polymerization of coordination complexes: silver(I) complexes with bis(amidopyridine) ligands derived from thiophene

The thiophene-based bis(N-methylamido-pyridine) ligand SC4H2-2,5-{C(=O)N(Me)-4-C5H4N}2 reacts with silver(I) salts AgX to give 1 : 1 complexes, which are characterized in the solid state as the macrocyclic complexes [Ag(2){SC4H2-2,5-(CONMe-4-C5H4N)2}2][X]2, which have the cis conformation of the C(=O)N(Me) group, when X = CF3CO2, NO3, or CF3SO3 but as the polymeric complex [Ag(n){SC4H2-2,5-(CONMe-4-C5H4N)2}n][X]n, with the unusual trans conformation of the C(=O)N(Me) group, when X = PF6. The bis(amido-pyridine) ligand SC4H2-2,5-{C(=O)NHCH2-3-C5H4N}2 reacts with silver(I) trifluoroacetate to give the polymeric complex [Ag(n){SC4H2-2,5-(CONHCH2-3-C5H4N)2}n][X]n, X = CF3CO2. The macrocyclic complexes contain transannular argentophilic secondary bonds. The polymers self assemble into sheet structures through interchain C=O...Ag and S...Ag bonds in [Ag(n){SC4H2-2,5-(CONMe-4-C5H4N)2}n][PF6]n and through Ag...Ag, C=O...Ag and Ag...O(trifluoroacetate)...HN secondary bonds in [Ag(n){SC4H2-2,5-(CONHCH2-3-C5H4N)2}n][CF3CO2]n.     

Effect of nitrogen on mechanical,oxidation and structural behaviour of Ti–Si–B–C–N nanocomposite hard coatings deposited by DC sputtering

Ti–Si–B–C–N film was deposited by DC magnetron sputtering at different argon and nitrogen ratios such as N₂/Ar = 1 : 5, 2 : 4, 3 : 3, 4 : 1 and 5 : 0. The formation of TiN and TiB phases was observed because of incorporation of nitrogen. The hardness, modulus, microstructure, structure and bond formation with different nitrogen contents during the deposition were studied by nanoindentation, scanning electron microscope, X‐ray diffraction and X‐ray photoelectron spectroscopy, respectively. The oxidation kinetics of Ti–Si–B–C–N was investigated. The nitrogen incorporation during deposition influences different properties of the coating. Hardness and modulus decreased, and microstructure showed very fine grain presence, and film changes to fully amorphous because of incorporation of nitrogen in the film. Copyright © 2016 John Wiley & Sons, Ltd.     

Concerning the electronic coupling of MoMo quadruple bonds linked by 4,4'-azodibenzoate and comparison with t2g 6-Ru(II) centers by 4,4'-azodiphenylcyanamido ligands

From the reactions between Mo2(O2CtBu)4 and each of terephthalic acid and 4,4'-azodibenzoic acid, the compounds [Mo2(O2CtBu)3]2(mu-O2CC6H4CO2) (1) and [Mo2(O2CtBu)3]2(mu-O2CC6H4N2C6H4CO2) (2) have been made and characterized by spectroscopic and electrochemical methods. Their electronic structures have been examined by computations employing density functional theory on model compounds where HCO2 substitutes for tBuCO2. On the basis of these studies, the two Mo2 units are shown to be only weakly coupled and the mixed-valence ions 1+ and 2+ to be valence-trapped and Class II and I, respectively, on the Robin-Day classification scheme for mixed-valence compounds. These results are compared to t2g6-Ru centers linked by 1,4-dicyanamidobenzene and azo-4,4'-diphenylcyanamido bridges for which the mixed-valence ions [Ru-bridge-Ru]5+ have been previously classified as fully delocalized, Class III [Crutchley et al. Inorg. Chem. 2001, 40, 1189; Inorg. Chem. 2004, 43, 1770], and on the basis of results described herein, it is proposed that the latter complex ion is more likely a mixed-valence organic radical where the bridge is oxidized and not the Ru(2+) centers.