Synthesis and characterization of lead oxide nano-powders by sol–gel method

Our goal in this research was to obtain lead oxide nano-powders by sol–gel method. In this method, lead oxide nano-powders were synthesized through the reaction of citric acid (C₆H₇O₈·H₂O) solution and lead acetate [Pb(C₂H₃O₂)₂] solution as stabilizer and precursor, respectively. The effect of different parameters including calcination temperature, (molar ratio of citric acid to lead acetate) and drying conditions were investigated. The prepared lead oxide nano-powders were characterized by FT-IR spectroscopy, X-ray diffraction, thermogravimetric analysis and scanning electron microscopy. The prepared PbO samples consist of the particles in the range of 50–120 nm or the thick plate like structures with thickness of 53 nm depending on the drying conditions.     

Synthesis and characterization of nanostructured aluminum borate by sol–gel method

Nanostructured aluminum borate was synthesized using sol?Cgel technique. X-ray diffraction study revealed that the synthesized aluminum borate was single crystal. These nanorods have very uniform diameter. High-resolution transmission electron microscope images indicate that aluminum borate is well crystallized. The alternating current (AC) conductivity of the aluminum borate was studied as a function of temperature and frequency. The AC conductivity mechanism of the aluminum borate was found to be proportional to ??^s. The exponent s is almost independent with temperature. This suggests that AC conductivity mechanism of the aluminum borate can be interpreted by localized hopping model.     

Synthesis and characterization of nanocrystalline tin oxide by sol–gel method

Nanocrystalline SnO₂ particles have been synthesized by a sol–gel method from the very simple starting material granulated tin. The synthesis leads a sol–gel process when citric acid is introduced in the solution obtained by dissolving granulated tin in HNO₃. Citric acid has a great effect on stabilizing the precursor solution, and slows down the hydrolysis and condensation processes. The obtained SnO₂ particles range from 2.8 to 5.1 nm in size and 289–143 m² g⁻¹ in specific surface area when the gel is heat treated at different temperatures. The particles show a lattice expansion with the reduction in particle size. With the absence of citric acid, the precursor hydrolyzes and condenses in an uncontrollable manner and the obtained SnO₂ nanocrystallites are comparatively larger in size and broader in size distribution. The nanocrystallites have been characterized by means of TG-DSC, FT-IR, XRD, BET and TEM.     

Synthesis and characterization of nitrogen-doped TiO2 nanoparticles prepared by sol–gel method

The N-doped TiO₂ has been synthesized by sol?Cgel method, using titanium isopropoxide, isopropanol and an aqueous solution of ammonia with ratio 2:1:10. The concentrations used for the NH₃ aqueous solution were 3, 7, 10 and 15?%. The samples have been analysed by X-ray diffraction, electron microscopy (SEM and TEM) thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), micro-Raman spectroscopy and diffuse reflectivity. TEM, SEM, DSC and TGA showed that the morphology is influenced by the presence of N^3? ions but not by the concentration of the solution. Instead reflectance gave us a relation between values of the energy gap and the concentration of N^3? ions: the gap between valence and conduction band lowers as the concentration of NH₃ in the starting solution increases. From these results we can say that the properties of the material have been tuned by doping with nitrogen ions because the particles absorb more light in the visible range, and this is important for photovoltaic and photocatalytic applications.     

Synthesis and characterization of tellurium-doped CdO nanoparticles thin films by sol–gel method

In this work, tellurium (Te) doped CdO nanoparticles thin films with different Te concentrations (1, 3, 5, 7 and 10 %) were prepared by sol–gel method. The effects of Te doping on the structural, morphological and optical properties of the CdO thin films were systematically studied. From X-ray diffraction spectra, it has seen that all of thin films were formed polycrystalline and cubic structure having (111), (200) and (311) orientations. The structure of CdO thin films with Te-dopant was formed the unstable CdTeO₃ monoclinic structure crystal plane ( $ {\bar{\text{1}}\text{22}} $ 1 ¯ 22 ), however, the intensity of this unstable peak of the crystalline phase decreased with the increase of Te-doping ratio. The strain in the structure is also studied by using Williamson-Hall method. From FE-SEM images, it has seen that particles have homogeneously distributed and well hold onto the substrate surface. Additionally, grain size increases from 27 to 121 nm with the increase of Te-doping ratio. Optical results indicate that 1 % Te-doped CdO thin film has the maximum transmittance of about 87 %, and the values of optical energy band gap increases from 2.50 to 2.64 eV with the increase of Te-doping ratio. These results make Te-doped CdO thin films an attractive candidate for thin film material applications.     

Comparative study of the thermal behavior of Sr–Cu–O gels obtained by sol–gel and microwave-assisted sol–gel method

Journal of Thermal Analysis and Calorimetry - In the literature data, several papers reported the synthesis by various chemical or physical methods of the SrCu2O2 (SCO) having possible applications...     

Synthesis and characterization of hydroxyapatite obtained from different organic precursors by sol–gel method

The synthesis of four types of hydroxyapatite synthesized from calcium chloride and four different organic phosphites is presented. The method of synthesis chosen is the sol–gel route, which has a number of advantages compared to other methods, like the intimate contact between reactants and the milder synthesis conditions. The samples were thermally treated, the TG/DTG/DTA curves being obtained at four heating rates, namely: 7, 10, 12 and 15 °C min⁻¹. The samples were characterized before and after the thermal treatment using FT-IR analysis. The FT-IR spectra certified that the formed compounds represent hydroxyapatite. Based on the information from the TG curves and IR spectra interpretation, a reaction mechanism was proposed.     

Thermal,chemical and antimicrobial characterization of bioactive titania synthesized by sol–gel method

Journal of Thermal Analysis and Calorimetry - Chemical stability, anticorrosive properties and photocatalytic activity of titanium dioxide (TiO2) are among the most important characteristics for...     

Structural and optical characterization of Ag-doped TiO2 nanoparticles prepared by a sol–gel method

Undoped and silver-doped TiO₂ nanoparticles (Ti_1?x Ag _x O₂, where x?=?0.00?C0.10) were synthesized by a sol?Cgel method. The synthesized products were characterized by X-ray diffraction (XRD), particle size analyzer (PSA), scanning electron microscope (SEM), and UV?CVisible spectrophotometer. XRD pattern confirmed the tetragonal structure of synthesized samples. Average crystallite size of synthesized nanoparticles was determined from X-ray line broadening using the Debye?CScherrer formula. The crystallite size was varied from 8 to 33?nm as the calcination temperature was increased from 300 to 800?°C. The incorporation of 3 to 5% Ag⁺ in place of Ti⁴⁺ provoked a decrease in the size of nanocrystals as compared to undoped TiO₂. The SEM micrographs revealed the agglomerated spherical-like morphology of particles. SEM, PSA, and XRD measurements show that the particles size of the powder is in nanoscale. Optical absorption measurements indicated a red shift in the absorption band edge upon silver doping. Direct allowed band gap of undoped and Ag-doped TiO₂ nanoparticles measured by UV?CVis spectrometer were 3.00 and 2.80?eV, respectively, at 500?°C.     

Synthesis and characterization of sol–gel alumina nanofibers

Abstract Alumina nanofibers of high aspect ratio with surface area of >300 m² g⁻¹ has been prepared successfully in bulk quantities by the sol–gel method. The synthesis parameters including the binary water–alcohol solvent system to aluminium isopropoxide ratio, pH, type of solvent and aging temperature affect the uniformity and formation of nanofibers. It is proposed that alumina nanofibers were formed by the curling of the nanosheets upon condensation after the hydrolysis. The phase evolution of alumina nanofibers from pseudoboehmite to α phase has been shown by XRD and FTIR. ²⁷Al NMR investigations show that the Al atoms are six and four coordinated. The morphology of the alumina nanofibers does not change much as the calcination temperature was increased. In addition, the average pore size increases and the BET surface area decreases as a function of calcination temperature. The thermal behavior of alumina nanofibers was investigated by TGA. Graphical Abstract      

Electrochemical characterization of sodium and potassium doped lanthanum–titanium mixed oxides prepared by sol–gel method

Varying amounts of Na and K doped lanthanum–titanium oxides were synthesized by gel entrapment technique. These ceramics were characterized by X-ray diffraction. Microstructural investigations revealed grain growth in the doped material compared to undoped sample. Dielectric relaxations of these compounds were investigated in the temperature range 250–900 °C. A high degree of dispersion of the permittivity of un-doped lanthanum–titanium oxide and K and Na doped lanthanum–titanium oxide was observed in the frequency range <100 kHz which was attributed to oxygen vacancies. An increase in the permittivity values were observed with 1 % Na and K doped samples. The permittivity values further deteriorated with the dopant concentration. Using the Cole–Cole model, an analysis of the dielectric loss with frequency was performed, assuming a distribution of relaxation time. The dielectric loss was found to decrease by doping K in lanthanum–titanium oxide matrix. The dc conductivity studies showed that a temperature dependent hopping type mechanism is responsible for electrical conduction in the system.     

A study on sol–gel synthesis and characterization of SiC nano powder

Nano sized β-SiC particles were synthesized from sol–gel process. Mono dispersed β-SiC nano particles with semi spherical morphology were obtained by employing APC as a dispersant agent and adjusting pH in the range of 2.5–4. Phenolic resin and TEOS were employed as precursors and heat treatment was conducted up to 1500 °C. Different techniques such as XRD, DTA, FTIR, PSA, SEM and TEM were used to characterize the formation of β-SiC. The (Si–O-C) bonds were formed by hydrolysis and condensation reactions in the gel while the nucleation of crystalline β-SiC was found to be initiated at 1400 °C. The primary particles in the sol were found to be (< 10 nm) while the size distribution in the final product was recorded in the range of 30–50 nm.     

Preparation and characterization of CaCu3Ti4O12 powders by non-hydrolytic sol–gel method

CaCu₃Ti₄O₁₂ (CCTO) powders were prepared via a non-hydrolytic sol–gel (NHSG) method by using acetylacetone as chelating agent and ethylene glycol as solvent. The samples were characterized by TG–DSC, Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscope. The dielectric properties of ceramics were also measured. The pure perovskite-like CCTO powders were obtained by heat treatment at 800 °C for 2 h. The average particle sizes of CCTO powders calcined at 800 °C were approximately 350–450 nm. The samples sintered at 1,000 °C showed the mean grain size of 2.5–4 μm. Specially, the ceramics exhibited high dielectric constant (1.19 × 10⁵–1.40 × 10⁵) and low dielectric loss (0.051–0.1) in the temperature range of 30–110 °C. Moreover, with the NHSG method the period of synthesis process was greatly shortened.     

Review of mullite synthesis routes by sol–gel method

The sol–gel method for the mullite synthesis is reviewed, with particular emphasis on the characterization of monophasic and diphasic gels at low, intermediate and high temperatures and the factors that influence the hydrolysis and condensation rate of the sol–gel process, which in turn determine the properties of the final material. A wide range of studies about mullite precursors synthesized via sol–gel is discussed here.     

Preparation and characterization of nanocrystalline Ca-doped CeO2 by sol–gel process

The reactivity of CeO₂ is determined by grain size and oxygen vacancies, which can be achieved by doping elements with less oxidation state into CeO₂. In this study nanocrystalline Ca-doped CeO₂ sol was synthesized from the reaction of hydrate cerium (III) nitrate and calcium nitrate tetrahydrate in alcohol solution after being calcined at 600?°C. X-ray diffraction as well as selected area electron diffraction gave evidence that the synthesized Ca-doped CeO₂ samples were well crystalline and had a cubic fluorite structure. TEM observation revealed that Ca-doped CeO₂ was composed by nanoparticles with grain size around 8?nm. The Raman spectrum of pure CeO₂ consists of a single triple degenerate F_2g model characteristic of the fluorite-like structure. In the Ca-doped CeO₂ sample, two additional low-intensity Raman bands were detected, thus confirming the formation of the solid solution. The synthesized nanometric powder is expected to be used in solid oxide fuel cells as well as in the catalytic treatment of automobile exhaust fumes.     

Fabrication and characterization of NiTiO3 nanofibers by sol–gel assisted electrospinning

Continuous NiTiO₃ nanofibers have been successfully synthesized by a sol–gel assisted electrospinning method followed by calcination at 600 °C in air. These nanofibers were characterized for the morphological, structural and optical properties by scanning electron microscopy (SEM), energy-dispersive X-ray spectrum (EDS), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS) and UV–visible (UV–vis) diffuse reflectance spectroscopy (DRS). SEM results reveal that the obtained NiTiO₃ nanofibers are 175 nm in diameter and several micrometers in length after annealing at 600 °C. The XRD analysis shows that the nanofibers possess highly crystalline structure with no impurity phase. In contrast, the NiTiO₃ nanoparticles synthesized at the identical conditions by a sol–gel route have impurities including TiO₂ and NiO. Moreover, the electrospun NiTiO₃ nanofibers are endowed with an obvious optical absorbance in the visible range, demonstrating they have visible light photoresponse.     

New modified filler obtained by silica formed by sol–gel method on calcium carbonate

This study focus on the modification of the particles of precipitated calcium carbonate (PCC) with silica formed in situ by sol–gel method. The new materials were characterized by several spectroscopic, analytical and microscopic techniques. A dense film of highly branched silica was formed at the surface of the scalenohedral PCC crystals. The amount of silica deposited at the PCC surface, as determined by thermogravimetric analysis, reached up to 25 wt% under appropriate experimental conditions. Particle size distributions obtained by laser diffraction spectroscopy of the new modified PCC’s were close to the distribution of the original PCC, even considering that some variation in the average size of the particles was noted. This result is of great interest regarding the application of these materials, for instance, as fillers in the paper industry since the coating of silica may contribute to the fibre-to-fibre bonding, thus improving paper strength.